A versatile analytical method(VAM) for calculating the harmonic components of the magnetomotive force(MMF) generated by diverse armature windings in AC machines has been proposed, and the versatility of this method ha...A versatile analytical method(VAM) for calculating the harmonic components of the magnetomotive force(MMF) generated by diverse armature windings in AC machines has been proposed, and the versatility of this method has been established in early literature. However, its practical applications and significance in advancing the analysis of AC machines need further elaboration. This paper aims to complement VAM by augmenting its theory, offering additional insights into its conclusions, as well as demonstrating its utility in assessing armature windings and its application of calculating torque for permanent magnet synchronous machines(PMSM). This work contributes to advancing the analysis of AC machines and underscores the potential for improved design and performance optimization.展开更多
This study proposed the newly-designed Pelagic and demersal trawls for the fishing vessels operating in Cameroonian waters in pelagic and demersal fishing grounds. The engineering performances of both trawls were inve...This study proposed the newly-designed Pelagic and demersal trawls for the fishing vessels operating in Cameroonian waters in pelagic and demersal fishing grounds. The engineering performances of both trawls were investigated using physical modelling method and analytical method based on the predicted equations. In a flume tank, a series of physical model tests based on Tauti’s law were performed to investigate the hydrodynamic and geometrical performances of both trawls and to assess the applicability of the analytical methods based on predicted equations. The results showed that in model scale, the working towing speed and door spread for the pelagic trawl were 3.5 knots and 1.85 m, respectively, and for the bottom trawl net they were 4.0 knots and 1.8 m. At that speed and door spread, the drag force, net opening height, and wing-end spread of the pelagic model trawl were 36.73 N, 0.89 m, and 0.86 m, respectively, and the swept area was 0.76 m<sup>2</sup>. Bottom trawl speed and door spread were 30.43 N, 0.38 m, and 0.45 m, respectively, and the swept area was 0.25 m<sup>2</sup>. The maximum difference between the experimental and analytical results of hydrodynamic performances was less than 56.22% and 41.45%, respectively, for pelagic and bottom trawls, the results of the geometrical performances obtained using predicted equations were close to the experimental results in the flume tank with a maximum relative error less than 12.85%. The newly developed pelagic and bottom trawls had advanced engineering performance for high catch efficiency and selectivity and could be used in commercial fishing operations in Cameroonian waters.展开更多
Buried water pipelines are vulnerable to fail or break due to excessive loading or ground displacements.Accurate evaluation of pipe performance and serviceability relies on the proper understanding of pipe-soil intera...Buried water pipelines are vulnerable to fail or break due to excessive loading or ground displacements.Accurate evaluation of pipe performance and serviceability relies on the proper understanding of pipe-soil interactions(PSI).Analytical methods are important approaches to studying PSI.However,a systematic and thorough literature review to analyze the existing research trends,technological achievements and future research opportunities is not available.This work investigates analytical methods that analyze the stress and deformation of pipes in terms of cross-sectional,transverse and longitudinal PSI problems.First,scientometric analysis is performed to acquire relevant research works from online databases and analyze the existing data of influential authors,productive research sources and frequent key word occurrence in the fields of interest.Second,a qualitative discussion is performed in the three categories of PSI:(1)cross-sectional,including ovalization and circumferential behaviours;(2)transverse,including seismic fault crossing,weak soil zones,ground settlement and pipe uplift;and(3)longitudinal.Third,six research opportunities are discussed,including the role of friction in cross-sectional deformation,combined effects of bending and compression,choice of soil reaction models and calibration of key parameters,effect of pipe flaws,soil spatial variability and behaviours of curved pipes.This study helps beginners familiarize themselves with PSI analytical methods and provides experienced researchers with ideas for future research directions.展开更多
Over the past decade,the swift advancement of metabolomics can be credited to significant progress in technologies such as mass spectrometry,nuclear magnetic resonance,and multivariate statistics.Currently,metabolomic...Over the past decade,the swift advancement of metabolomics can be credited to significant progress in technologies such as mass spectrometry,nuclear magnetic resonance,and multivariate statistics.Currently,metabolomics garners widespread application across diverse fields including drug research and development,early disease detection,toxicology,food and nutrition science,biology,prescription,and chinmedomics,among others.Metabolomics serves as an effective characterization technique,offering insights into physiological process alterations in vivo.These changes may result from various exogenous factors like environmental conditions,stress,medications,as well as endogenous elements including genetic and protein-based influences.The potential scientific outcomes gleaned from these insights have catalyzed the formulation of innovative methods,poised to further broaden the scope of this domain.Today,metabolomics has evolved into a valuable and widely accepted instrument in the life sciences.However,comprehensive reviews focusing on the sample preparation and analytical methodologies employed in metabolomics within the life sciences are surprisingly scant.This review aims to fill that gap,providing an overview of current trends and recent advancements in metabolomics.Particular emphasis is placed on sample preparation,sophisticated analytical techniques,and their applications in life science research.展开更多
An anisotropic diffusion filter can be used to model a flow-dependent background error covariance matrix,which can be achieved by solving the advection-diffusion equation.Because of the directionality of the advection...An anisotropic diffusion filter can be used to model a flow-dependent background error covariance matrix,which can be achieved by solving the advection-diffusion equation.Because of the directionality of the advection term,the discrete method needs to be chosen very carefully.The finite analytic method is an alternative scheme to solve the advection-diffusion equation.As a combination of analytical and numerical methods,it not only has high calculation accuracy but also holds the characteristic of the auto upwind.To demonstrate its ability,the one-dimensional steady and unsteady advection-diffusion equation numerical examples are respectively solved by the finite analytic method.The more widely used upwind difference method is used as a control approach.The result indicates that the finite analytic method has higher accuracy than the upwind difference method.For the two-dimensional case,the finite analytic method still has a better performance.In the three-dimensional variational assimilation experiment,the finite analytic method can effectively improve analysis field accuracy,and its effect is significantly better than the upwind difference and the central difference method.Moreover,it is still a more effective solution method in the strong flow region where the advective-diffusion filter performs most prominently.展开更多
An analytical method of fault characteristic for the HVDC system based on frequency response characteristics of boundary elements is presented here.The computational formulas of transfer function and input impedance a...An analytical method of fault characteristic for the HVDC system based on frequency response characteristics of boundary elements is presented here.The computational formulas of transfer function and input impedance are deduced using the distributed parameter model of HVDC transmission line,and the amplitude-to-frequency-characteristics of the transfer function and input impedance are analyzed.Based on the amplitude-to-frequency difference between internal and external faults,a non-unit protection method for VSC-HVDC transmission line is presented.Using the current ratio of high-to-low-frequency,this protection method can distinguish internal from external fault.The presented algorithm only uses local-end current,has high operation speed,and is easy to implement.Simulations on a±200 kV VSC-HVDC system are conducted to demonstrate the validity and feasibility of the developed protection method.展开更多
Buried pipelines are commonly damaged when laid across strike-slip faults,always leading to some level of destruction with fault movement.The moment of the neutral axis of a pipe section was obtained by integration,an...Buried pipelines are commonly damaged when laid across strike-slip faults,always leading to some level of destruction with fault movement.The moment of the neutral axis of a pipe section was obtained by integration,and the equations for the bending moment and the bending strain on a pipeline’s section were presented here,based on a trilinear stress–strain model.The calculation method for the lateral soil pressure and pipeline’s bending strain near the fault-crossing point was improved.Lateral soil pressure was regarded as being related to lateral pipeline movement and,for accurate calculation,this part of the pipeline was divided into finite element segments.An iterative process for solving for pipe bending strain was derived,and the algorithm and program for calculating bending strain and the potential damage position of the pipeline’s sections was compiled based on Matlab software.Compared with finite element method(FEM)results and the current standard method,in the situation of a pipeline being in tension under the action of a strike-slip fault(intersection angle<90),the result of the proposed method is in good agreement with FEM results.This shows that the proposed analytical method possessed a good reference value for the strain response analysis of tensile steel pipelines under strike-slip faulting.展开更多
A Reynolds-Averaged Navier Stokes(RANS)-information analytical method for predicting Rotor-Stator Interaction(RSI)broadband noise is established in this paper.First,the turbulence information is deduced from RANS simu...A Reynolds-Averaged Navier Stokes(RANS)-information analytical method for predicting Rotor-Stator Interaction(RSI)broadband noise is established in this paper.First,the turbulence information is deduced from RANS simulation result.Then,the unsteady load on the stator blade is calculated using a strip theory approach based on LINearized SUBsonic unsteady flow in cascade(LINSUB)and 2-D equivalence method.In the end,the sound power of RSI broadband noise is calculated by coupling the unsteady load on the stator blade with acoustic analogy and annular duct mode.The broadband noise model part of the RANS-information analytical method is validated against the upstream sound power of an annular cascade experimental bench.Besides,the RANS-information analytical method is used in predicting RSI broadband noise of a single-stage axial fan acoustic experimental bench,the results illustrate that the RANS-information analytical method can accurately predict the RSI broadband noise in different fan working conditions.After simplification the Wave Leading Edge(WLE)stator blade,the effect of WLE stator blade on RSI broadband noise is studies.Although the simplification may bring some discrepancies,the results illustrate that the RANS-information analytical method has the capability for further studies on the broadband noise reduction with WLE stator blade.展开更多
In this paper,a simplified analytical method used to predict the residual ultimate strength of a ship hull after a shoal grounding accident is proposed.Shoal grounding accidents always lead to severe denting,though no...In this paper,a simplified analytical method used to predict the residual ultimate strength of a ship hull after a shoal grounding accident is proposed.Shoal grounding accidents always lead to severe denting,though not tearing,of the ship bottom structure,which may threaten the global hull girder resistance and result in even worse consequences,such as hull collapse.Here,the degree of damage of the bottom structure is predicted by a series of analytical methods based on the plastic-elastic deformation mechanism.The energy dissipation of a ship bottom structure is obtained from individual components to determine the sliding distance of the seabed obstruction.Then,a new approach to assess the residual strength of the damaged ship subjected to shoal grounding is proposed based on the improved Smith’s method.This analytical method is verified by comparing the results of the proposed method and those generated by numerical simulation using the software ABAQUS.The proposed analytical method can be used to assess the safety of a ship with a double bottom during its design phase and predict the residual ultimate strength of a ship after a shoal grounding accident occurs.展开更多
We show a useful analytical method to design grating compensated dispersion-managed systems. Our method is in good agreement with the numerical results even in the presence of group delay ripples in the chirped fiber ...We show a useful analytical method to design grating compensated dispersion-managed systems. Our method is in good agreement with the numerical results even in the presence of group delay ripples in the chirped fiber gratings.展开更多
In order to solve the problem of asymmetric bidirectional flux control capability in hybrid excitation machine,a novel structure called dual consequent hybrid excitation synchronous(DCHES)machine is presented in this ...In order to solve the problem of asymmetric bidirectional flux control capability in hybrid excitation machine,a novel structure called dual consequent hybrid excitation synchronous(DCHES)machine is presented in this paper.Generally,the analysis of back-EMF for the machine with complex electromagnetic structure such as DCHES machine should utilize 3-D finite element analysis(FEA),which will require huge resources and computing time.In order to avoid using 3-D FEA to analyze the back-EMF of complex structure,an analytical method of calculating back-EMF is presented in this paper.The electromagnetic field in 3-D space can be simplified as a 2-D field by dividing the 3-D field into several simple zones,the resultant effect equals to the summation of every single 2-D field's effect.According to electromagnetic theory,the analytical formula of back-EMF is obtained on the basis of Fourier series.The influence of main parameters on back-EMF waveform under sine and trapezoidal flux distribution is discussed respectively.The theoretical result shows that the trapezoidal air-gap flux distribution would generate a sine back-EMF.Finally,the presented analytical method is verified and evaluated with experimental results.展开更多
In recent times, the overall interest over Supercritical Fluid Chromatography (SFC) is truly growing within various domains but especially for pharmaceutical analysis. However, in the best of our knowledge modern SFC ...In recent times, the overall interest over Supercritical Fluid Chromatography (SFC) is truly growing within various domains but especially for pharmaceutical analysis. However, in the best of our knowledge modern SFC is not yet applied for drug quality control in the daily routine framework. Among the numerous reported SFC methods, none of them could be found to fully satisfy to all steps of the analytical method lifecycle. Thereby, the present contribution aims to provide an overview of the current and past achievements related to SFC techniques, with a targeted attention to this lifecycle and its successive steps. The included discussions were therefore structured accordingly and emphasizing the analytical method lifecycle in accord with the International Conference on Harmonisation (ICH). Recent and important scientific outputs in the field of analytical SFC, as well as instrumental evolution, qualification strategies, method development methodologies and discussions on the topic of method validation are reviewed.展开更多
With the development of modern industry and ever more complex structural loads,the possibility of fatigue failure is increasing.Fatigue analysis can be used to evaluate the service life of components and reduce the pr...With the development of modern industry and ever more complex structural loads,the possibility of fatigue failure is increasing.Fatigue analysis can be used to evaluate the service life of components and reduce the probability of accidents.Therefore,the development and application of fatigue-analysis technology have important research significance.This paper collects information from a wide field of literature and summarizes the current status of fatigue-analysis research.It covers related theoretical knowledge,fatigue-life prediction methods,and fatigue design methods and their application scenarios,and it summarizes the challenges and research hotspots in the field.On the basis of this examination,future development directions of fatigue-life prediction methods are proposed.The conclusions will have a certain guiding role in the development of fatigue-analysis methods.展开更多
The N-1 criterion is a critical factor for ensuring the reliable and resilient operation of electric power distribution networks.However,the increasing complexity of distribution networks and the associated growth in ...The N-1 criterion is a critical factor for ensuring the reliable and resilient operation of electric power distribution networks.However,the increasing complexity of distribution networks and the associated growth in data size have created a significant challenge for distribution network planners.To address this issue,we propose a fast N-1 verification procedure for urban distribution networks that combines CIM file data analysis with MILP-based mathematical modeling.Our proposed method leverages the principles of CIM file analysis for distribution network N-1 analysis.We develop a mathematical model of distribution networks based on CIM data and transfer it into MILP.We also take into account the characteristics of medium voltage distribution networks after a line failure and select the feeder section at the exit of each substation with a high load rate to improve the efficiency of N-1 analysis.We validate our approach through a series of case studies and demonstrate its scalability and superiority over traditional N-1 analysis and heuristic optimization algorithms.By enabling online N-1 analysis,our approach significantly improves the work efficiency of distribution network planners.In summary,our proposed method provides a valuable tool for distribution network planners to enhance the accuracy and efficiency of their N-1 analyses.By leveraging the advantages of CIM file data analysis and MILP-based mathematical modeling,our approach contributes to the development of more resilient and reliable electric power distribution networks.展开更多
The laboratories in the bauxite processing industry are always under a heavy workload of sample collection, analysis, and compilation of the results. After size reduction from grinding mills, the samples of bauxite ar...The laboratories in the bauxite processing industry are always under a heavy workload of sample collection, analysis, and compilation of the results. After size reduction from grinding mills, the samples of bauxite are collected after intervals of 3 to 4 hours. Large bauxite processing industries producing 1 million tons of pure aluminium can have three grinding mills. Thus, the total number of samples to be tested in one day reaches a figure of 18 to 24. The sample of bauxite ore coming from the grinding mill is tested for its particle size and composition. For testing the composition, the bauxite ore sample is first prepared by fusing it with X-ray flux. Then the sample is sent for X-ray fluorescence analysis. Afterwards, the crucibles are washed in ultrasonic baths to be used for the next testing. The whole procedure takes about 2 - 3 hours. With a large number of samples reaching the laboratory, the chances of error in composition analysis increase. In this study, we have used a composite sampling methodology to reduce the number of samples reaching the laboratory without compromising their validity. The results of the average composition of fifteen samples were measured against composite samples. The mean of difference was calculated. The standard deviation and paired t-test values were evaluated against predetermined critical values obtained using a two-tailed test. It was found from the results that paired test-t values were much lower than the critical values thus validating the composition attained through composite sampling. The composite sampling approach not only reduced the number of samples but also the chemicals used in the laboratory. The objective of improved analytical protocol to reduce the number of samples reaching the laboratory was successfully achieved without compromising the quality of analytical results.展开更多
The main surface of a large reflector antenna is composed of thousands of panels,which are inevitably deformed under natural load,leading to a great deterioration of electrical performance of the antenna.The active su...The main surface of a large reflector antenna is composed of thousands of panels,which are inevitably deformed under natural load,leading to a great deterioration of electrical performance of the antenna.The active surface technique is an effective method to compensate antenna deformation error and has been widely used.The actuator is a complex component,it has not been established in the antenna structure analysis model,which limits the theoretical analysis ability of the active surface technology.To solve this problem,an integrated structure analysis method of active surface antenna by using the simplified actuator is proposed.First,according to the supporting characteristics and adjusting function of the actuator,the complex actuator is simplified a simple structure of support beams,support truss and adjustment beam.Second,the finite element model of the active surface antenna including the simplified actuator is established.Then,the relationship between the adjustment value(load)of adjustment beam and the deformation of the antenna structure is deduced,and the integrated analysis method for realizing the active adjustment of panels is established.Finally,the model and adjustment analysis method of the active surface antenna in this paper is applied to an 8 m antenna,and satisfactory structural analysis results are obtained,which shows the effectiveness and universality of the method,and provides a reference for the modeling and adjustment analysis of the active surface antenna.展开更多
In high-altitude nuclear detonations,the proportion of pulsed X-ray energy can exceed 70%,making it a specific monitoring signal for such events.These pulsed X-rays can be captured using a satellite-borne X-ray detect...In high-altitude nuclear detonations,the proportion of pulsed X-ray energy can exceed 70%,making it a specific monitoring signal for such events.These pulsed X-rays can be captured using a satellite-borne X-ray detector following atmospheric transmission.To quantitatively analyze the effects of different satellite detection altitudes,burst heights,and transmission angles on the physical processes of X-ray transport and energy fluence,we developed an atmospheric transmission algorithm for pulsed X-rays from high-altitude nuclear detonations based on scattering correction.The proposed method is an improvement over the traditional analytical method that only computes direct-transmission X-rays.The traditional analytical method exhibits a maximum relative error of 67.79% compared with the Monte Carlo method.Our improved method reduces this error to within 10% under the same conditions,even reaching 1% in certain scenarios.Moreover,its computation time is 48,000 times faster than that of the Monte Carlo method.These results have important theoretical significance and engineering application value for designing satellite-borne nuclear detonation pulsed X-ray detectors,inverting nuclear detonation source terms,and assessing ionospheric effects.展开更多
Circumferential yielding lining is able to tolerate controlled displacements without failure,which has been proven to be an effective solution to large deformation problem in squeezing tunnels.However,up to now,there ...Circumferential yielding lining is able to tolerate controlled displacements without failure,which has been proven to be an effective solution to large deformation problem in squeezing tunnels.However,up to now,there has not been a well-established design method for it.This paper aims to present a detailed analytical computation of support characteristic curve(SCC)for circumferential yielding lining,which is a significant aspect of the implementation of convergence-confinement method(CCM)in tunnel support design.Circumferential yielding lining consists of segmental shotcrete linings and highly deformable elements,and its superior performance mainly depends on the mechanical characteristic of highly deformable element.The deformation behavior of highly deformable element is firstly investigated.Its whole deforming process can be divided into three stages including elastic,yielding and compaction stages.Especially in the compaction stage of highly deformable element,a nonlinear stress-strain relationship can be observed.For mathematical convenience,the stress-strain curve in this period is processed as several linear sub-curves.Then,the reasons for closure of circumferential yielding lining in different stages are explained,and the corresponding accurate equations required for constructing the SCC are provided.Furthermore,this paper carries out two case studies illustrating the application of all equations needed to construct the SCC for circumferential yielding lining,where the reliability and feasibility of theoretical derivation are also well verified.Finally,this paper discusses the sensitivity of sub-division in element compaction stage and the influence of element length on SCC.The outcome of this paper could be used in the design of proper circumferential yielding lining.展开更多
This paper proposed a permanent magnet optimization method to suppress the air gap flux density harmonic of permanent magnet synchronous motor(PMSM).The method corrected the effective air gap length of the motor,calcu...This paper proposed a permanent magnet optimization method to suppress the air gap flux density harmonic of permanent magnet synchronous motor(PMSM).The method corrected the effective air gap length of the motor,calculated the magnetization length of the permanent in the case of parallel magnetization,and took the influence of the permanent magnet relative permeability into consideration.Based on these works,for a given sinusoidal air gap flux density waveform,the corresponding structural parameters can be calculated,so as to achieve the optimization of the permanent magnet.By using this method to optimize the shape of the magnet,the fundamental wave of the air gap flux density can be retained to the greatest extent,so as to eliminate harmonics and maintain the output capacity at the same time.The feasibility and accuracy of the method have been verified by finite element analysis(FEA)and prototype machine experiment.This method is simple and time-saving,and has a satisfactory accuracy,which provides a reference method for permanent magnet optimization of PMSM.展开更多
The size-dependent nonlinear buckling and postbuckling characteristics of circular cylindrical nanoshells subjected to the axial compressive load are investigated with an analytical approach. The surface energy effect...The size-dependent nonlinear buckling and postbuckling characteristics of circular cylindrical nanoshells subjected to the axial compressive load are investigated with an analytical approach. The surface energy effects are taken into account according to the surface elasticity theory of Gurtin and Murdoch. The developed geometrically nonlinear shell model is based on the classical Donnell shell theory and the von K′arm′an's hypothesis. With the numerical results, the effect of the surface stress on the nonlinear buckling and postbuckling behaviors of nanoshells made of Si and Al is studied. Moreover, the influence of the surface residual tension and the radius-to-thickness ratio is illustrated.The results indicate that the surface stress has an important effect on prebuckling and postbuckling characteristics of nanoshells with small sizes.展开更多
基金supported by the Natural Science Foundation of China under Grant U22A20214 and Grant 51837010。
文摘A versatile analytical method(VAM) for calculating the harmonic components of the magnetomotive force(MMF) generated by diverse armature windings in AC machines has been proposed, and the versatility of this method has been established in early literature. However, its practical applications and significance in advancing the analysis of AC machines need further elaboration. This paper aims to complement VAM by augmenting its theory, offering additional insights into its conclusions, as well as demonstrating its utility in assessing armature windings and its application of calculating torque for permanent magnet synchronous machines(PMSM). This work contributes to advancing the analysis of AC machines and underscores the potential for improved design and performance optimization.
文摘This study proposed the newly-designed Pelagic and demersal trawls for the fishing vessels operating in Cameroonian waters in pelagic and demersal fishing grounds. The engineering performances of both trawls were investigated using physical modelling method and analytical method based on the predicted equations. In a flume tank, a series of physical model tests based on Tauti’s law were performed to investigate the hydrodynamic and geometrical performances of both trawls and to assess the applicability of the analytical methods based on predicted equations. The results showed that in model scale, the working towing speed and door spread for the pelagic trawl were 3.5 knots and 1.85 m, respectively, and for the bottom trawl net they were 4.0 knots and 1.8 m. At that speed and door spread, the drag force, net opening height, and wing-end spread of the pelagic model trawl were 36.73 N, 0.89 m, and 0.86 m, respectively, and the swept area was 0.76 m<sup>2</sup>. Bottom trawl speed and door spread were 30.43 N, 0.38 m, and 0.45 m, respectively, and the swept area was 0.25 m<sup>2</sup>. The maximum difference between the experimental and analytical results of hydrodynamic performances was less than 56.22% and 41.45%, respectively, for pelagic and bottom trawls, the results of the geometrical performances obtained using predicted equations were close to the experimental results in the flume tank with a maximum relative error less than 12.85%. The newly developed pelagic and bottom trawls had advanced engineering performance for high catch efficiency and selectivity and could be used in commercial fishing operations in Cameroonian waters.
基金The authors gratefully acknowledge the Innovation and Technology Support Programme(ITSP)[Grant No.ITS/033/20FP]the Water Supplies Department of Hong Kong,China.Suggestions given by Dr.Andy Y.F.Leung are also appreciated.
文摘Buried water pipelines are vulnerable to fail or break due to excessive loading or ground displacements.Accurate evaluation of pipe performance and serviceability relies on the proper understanding of pipe-soil interactions(PSI).Analytical methods are important approaches to studying PSI.However,a systematic and thorough literature review to analyze the existing research trends,technological achievements and future research opportunities is not available.This work investigates analytical methods that analyze the stress and deformation of pipes in terms of cross-sectional,transverse and longitudinal PSI problems.First,scientometric analysis is performed to acquire relevant research works from online databases and analyze the existing data of influential authors,productive research sources and frequent key word occurrence in the fields of interest.Second,a qualitative discussion is performed in the three categories of PSI:(1)cross-sectional,including ovalization and circumferential behaviours;(2)transverse,including seismic fault crossing,weak soil zones,ground settlement and pipe uplift;and(3)longitudinal.Third,six research opportunities are discussed,including the role of friction in cross-sectional deformation,combined effects of bending and compression,choice of soil reaction models and calibration of key parameters,effect of pipe flaws,soil spatial variability and behaviours of curved pipes.This study helps beginners familiarize themselves with PSI analytical methods and provides experienced researchers with ideas for future research directions.
基金supported by the Science Foundation of Heilongjiang Administration of Traditional Chinese Medicine(No.2018-21).
文摘Over the past decade,the swift advancement of metabolomics can be credited to significant progress in technologies such as mass spectrometry,nuclear magnetic resonance,and multivariate statistics.Currently,metabolomics garners widespread application across diverse fields including drug research and development,early disease detection,toxicology,food and nutrition science,biology,prescription,and chinmedomics,among others.Metabolomics serves as an effective characterization technique,offering insights into physiological process alterations in vivo.These changes may result from various exogenous factors like environmental conditions,stress,medications,as well as endogenous elements including genetic and protein-based influences.The potential scientific outcomes gleaned from these insights have catalyzed the formulation of innovative methods,poised to further broaden the scope of this domain.Today,metabolomics has evolved into a valuable and widely accepted instrument in the life sciences.However,comprehensive reviews focusing on the sample preparation and analytical methodologies employed in metabolomics within the life sciences are surprisingly scant.This review aims to fill that gap,providing an overview of current trends and recent advancements in metabolomics.Particular emphasis is placed on sample preparation,sophisticated analytical techniques,and their applications in life science research.
基金The National Key Research and Development Program of China under contract Nos 2022YFC3104804,2021YFC3101501,and 2017YFC1404103the National Programme on Global Change and Air-Sea Interaction of China under contract No.GASI-IPOVAI-04the National Natural Science Foundation of China under contract Nos 41876014,41606039,and 11801402.
文摘An anisotropic diffusion filter can be used to model a flow-dependent background error covariance matrix,which can be achieved by solving the advection-diffusion equation.Because of the directionality of the advection term,the discrete method needs to be chosen very carefully.The finite analytic method is an alternative scheme to solve the advection-diffusion equation.As a combination of analytical and numerical methods,it not only has high calculation accuracy but also holds the characteristic of the auto upwind.To demonstrate its ability,the one-dimensional steady and unsteady advection-diffusion equation numerical examples are respectively solved by the finite analytic method.The more widely used upwind difference method is used as a control approach.The result indicates that the finite analytic method has higher accuracy than the upwind difference method.For the two-dimensional case,the finite analytic method still has a better performance.In the three-dimensional variational assimilation experiment,the finite analytic method can effectively improve analysis field accuracy,and its effect is significantly better than the upwind difference and the central difference method.Moreover,it is still a more effective solution method in the strong flow region where the advective-diffusion filter performs most prominently.
基金supported in part by the Science and Technology Project Funds through Grid State Corporation(Grant No.SGSNKYOOKJJS1501564)the National Science Foundation of China(Grant No.51477131).
文摘An analytical method of fault characteristic for the HVDC system based on frequency response characteristics of boundary elements is presented here.The computational formulas of transfer function and input impedance are deduced using the distributed parameter model of HVDC transmission line,and the amplitude-to-frequency-characteristics of the transfer function and input impedance are analyzed.Based on the amplitude-to-frequency difference between internal and external faults,a non-unit protection method for VSC-HVDC transmission line is presented.Using the current ratio of high-to-low-frequency,this protection method can distinguish internal from external fault.The presented algorithm only uses local-end current,has high operation speed,and is easy to implement.Simulations on a±200 kV VSC-HVDC system are conducted to demonstrate the validity and feasibility of the developed protection method.
基金supported by the National Natural Science Foundation of China(Grant Nos.41941019,41877285)the Fundamental Research Funds for the Central Universities(Grant Nos.300102289201,300102281724).
文摘Buried pipelines are commonly damaged when laid across strike-slip faults,always leading to some level of destruction with fault movement.The moment of the neutral axis of a pipe section was obtained by integration,and the equations for the bending moment and the bending strain on a pipeline’s section were presented here,based on a trilinear stress–strain model.The calculation method for the lateral soil pressure and pipeline’s bending strain near the fault-crossing point was improved.Lateral soil pressure was regarded as being related to lateral pipeline movement and,for accurate calculation,this part of the pipeline was divided into finite element segments.An iterative process for solving for pipe bending strain was derived,and the algorithm and program for calculating bending strain and the potential damage position of the pipeline’s sections was compiled based on Matlab software.Compared with finite element method(FEM)results and the current standard method,in the situation of a pipeline being in tension under the action of a strike-slip fault(intersection angle<90),the result of the proposed method is in good agreement with FEM results.This shows that the proposed analytical method possessed a good reference value for the strain response analysis of tensile steel pipelines under strike-slip faulting.
基金co-supported by the National Science and Technology Major Project,China(No.2017-Ⅱ-0008-0022)the National Natural Science Foundation of China(Nos.51936010 and 51776174)。
文摘A Reynolds-Averaged Navier Stokes(RANS)-information analytical method for predicting Rotor-Stator Interaction(RSI)broadband noise is established in this paper.First,the turbulence information is deduced from RANS simulation result.Then,the unsteady load on the stator blade is calculated using a strip theory approach based on LINearized SUBsonic unsteady flow in cascade(LINSUB)and 2-D equivalence method.In the end,the sound power of RSI broadband noise is calculated by coupling the unsteady load on the stator blade with acoustic analogy and annular duct mode.The broadband noise model part of the RANS-information analytical method is validated against the upstream sound power of an annular cascade experimental bench.Besides,the RANS-information analytical method is used in predicting RSI broadband noise of a single-stage axial fan acoustic experimental bench,the results illustrate that the RANS-information analytical method can accurately predict the RSI broadband noise in different fan working conditions.After simplification the Wave Leading Edge(WLE)stator blade,the effect of WLE stator blade on RSI broadband noise is studies.Although the simplification may bring some discrepancies,the results illustrate that the RANS-information analytical method has the capability for further studies on the broadband noise reduction with WLE stator blade.
基金National Natural Science Foundation of China(Grant No.51239007)。
文摘In this paper,a simplified analytical method used to predict the residual ultimate strength of a ship hull after a shoal grounding accident is proposed.Shoal grounding accidents always lead to severe denting,though not tearing,of the ship bottom structure,which may threaten the global hull girder resistance and result in even worse consequences,such as hull collapse.Here,the degree of damage of the bottom structure is predicted by a series of analytical methods based on the plastic-elastic deformation mechanism.The energy dissipation of a ship bottom structure is obtained from individual components to determine the sliding distance of the seabed obstruction.Then,a new approach to assess the residual strength of the damaged ship subjected to shoal grounding is proposed based on the improved Smith’s method.This analytical method is verified by comparing the results of the proposed method and those generated by numerical simulation using the software ABAQUS.The proposed analytical method can be used to assess the safety of a ship with a double bottom during its design phase and predict the residual ultimate strength of a ship after a shoal grounding accident occurs.
文摘We show a useful analytical method to design grating compensated dispersion-managed systems. Our method is in good agreement with the numerical results even in the presence of group delay ripples in the chirped fiber gratings.
基金Supported in part by the Natural Science Foundation of Henan Province under Grant 162300410319the Education Department of Henan Province under Grant 16A470026,Zhengzhou University of Light Industry under Grant 2014BSJJ040the office of Science and Technology in Henan Province under Grant 172102310254.
文摘In order to solve the problem of asymmetric bidirectional flux control capability in hybrid excitation machine,a novel structure called dual consequent hybrid excitation synchronous(DCHES)machine is presented in this paper.Generally,the analysis of back-EMF for the machine with complex electromagnetic structure such as DCHES machine should utilize 3-D finite element analysis(FEA),which will require huge resources and computing time.In order to avoid using 3-D FEA to analyze the back-EMF of complex structure,an analytical method of calculating back-EMF is presented in this paper.The electromagnetic field in 3-D space can be simplified as a 2-D field by dividing the 3-D field into several simple zones,the resultant effect equals to the summation of every single 2-D field's effect.According to electromagnetic theory,the analytical formula of back-EMF is obtained on the basis of Fourier series.The influence of main parameters on back-EMF waveform under sine and trapezoidal flux distribution is discussed respectively.The theoretical result shows that the trapezoidal air-gap flux distribution would generate a sine back-EMF.Finally,the presented analytical method is verified and evaluated with experimental results.
文摘In recent times, the overall interest over Supercritical Fluid Chromatography (SFC) is truly growing within various domains but especially for pharmaceutical analysis. However, in the best of our knowledge modern SFC is not yet applied for drug quality control in the daily routine framework. Among the numerous reported SFC methods, none of them could be found to fully satisfy to all steps of the analytical method lifecycle. Thereby, the present contribution aims to provide an overview of the current and past achievements related to SFC techniques, with a targeted attention to this lifecycle and its successive steps. The included discussions were therefore structured accordingly and emphasizing the analytical method lifecycle in accord with the International Conference on Harmonisation (ICH). Recent and important scientific outputs in the field of analytical SFC, as well as instrumental evolution, qualification strategies, method development methodologies and discussions on the topic of method validation are reviewed.
基金financially supported by China Postdoctoral Science Foundationthe National Natural Science Foundation of China(Grant No.51705132)+1 种基金the Natural Science Project of Henan Provincial Department of Science and Technology(Grant No.222102220088)the Natural Science Project of Henan Provincial Department of Education(Grant No.21A460006)。
文摘With the development of modern industry and ever more complex structural loads,the possibility of fatigue failure is increasing.Fatigue analysis can be used to evaluate the service life of components and reduce the probability of accidents.Therefore,the development and application of fatigue-analysis technology have important research significance.This paper collects information from a wide field of literature and summarizes the current status of fatigue-analysis research.It covers related theoretical knowledge,fatigue-life prediction methods,and fatigue design methods and their application scenarios,and it summarizes the challenges and research hotspots in the field.On the basis of this examination,future development directions of fatigue-life prediction methods are proposed.The conclusions will have a certain guiding role in the development of fatigue-analysis methods.
基金supported by the National Natural Science Foundation of China(52207105)。
文摘The N-1 criterion is a critical factor for ensuring the reliable and resilient operation of electric power distribution networks.However,the increasing complexity of distribution networks and the associated growth in data size have created a significant challenge for distribution network planners.To address this issue,we propose a fast N-1 verification procedure for urban distribution networks that combines CIM file data analysis with MILP-based mathematical modeling.Our proposed method leverages the principles of CIM file analysis for distribution network N-1 analysis.We develop a mathematical model of distribution networks based on CIM data and transfer it into MILP.We also take into account the characteristics of medium voltage distribution networks after a line failure and select the feeder section at the exit of each substation with a high load rate to improve the efficiency of N-1 analysis.We validate our approach through a series of case studies and demonstrate its scalability and superiority over traditional N-1 analysis and heuristic optimization algorithms.By enabling online N-1 analysis,our approach significantly improves the work efficiency of distribution network planners.In summary,our proposed method provides a valuable tool for distribution network planners to enhance the accuracy and efficiency of their N-1 analyses.By leveraging the advantages of CIM file data analysis and MILP-based mathematical modeling,our approach contributes to the development of more resilient and reliable electric power distribution networks.
文摘The laboratories in the bauxite processing industry are always under a heavy workload of sample collection, analysis, and compilation of the results. After size reduction from grinding mills, the samples of bauxite are collected after intervals of 3 to 4 hours. Large bauxite processing industries producing 1 million tons of pure aluminium can have three grinding mills. Thus, the total number of samples to be tested in one day reaches a figure of 18 to 24. The sample of bauxite ore coming from the grinding mill is tested for its particle size and composition. For testing the composition, the bauxite ore sample is first prepared by fusing it with X-ray flux. Then the sample is sent for X-ray fluorescence analysis. Afterwards, the crucibles are washed in ultrasonic baths to be used for the next testing. The whole procedure takes about 2 - 3 hours. With a large number of samples reaching the laboratory, the chances of error in composition analysis increase. In this study, we have used a composite sampling methodology to reduce the number of samples reaching the laboratory without compromising their validity. The results of the average composition of fifteen samples were measured against composite samples. The mean of difference was calculated. The standard deviation and paired t-test values were evaluated against predetermined critical values obtained using a two-tailed test. It was found from the results that paired test-t values were much lower than the critical values thus validating the composition attained through composite sampling. The composite sampling approach not only reduced the number of samples but also the chemicals used in the laboratory. The objective of improved analytical protocol to reduce the number of samples reaching the laboratory was successfully achieved without compromising the quality of analytical results.
基金supported by the National Key Research and Development Program of China(Nos.2021YFC2203501 and 2021YFC2203601)the National Natural Science Foundation of China(No.52165053)+2 种基金the China Postdoctoral Science Foundation(2021M702751)the Tianshan Young Talent Project of Xinjiang(2020Q068)the Doctor Scientific Research Project of Xinjiang。
文摘The main surface of a large reflector antenna is composed of thousands of panels,which are inevitably deformed under natural load,leading to a great deterioration of electrical performance of the antenna.The active surface technique is an effective method to compensate antenna deformation error and has been widely used.The actuator is a complex component,it has not been established in the antenna structure analysis model,which limits the theoretical analysis ability of the active surface technology.To solve this problem,an integrated structure analysis method of active surface antenna by using the simplified actuator is proposed.First,according to the supporting characteristics and adjusting function of the actuator,the complex actuator is simplified a simple structure of support beams,support truss and adjustment beam.Second,the finite element model of the active surface antenna including the simplified actuator is established.Then,the relationship between the adjustment value(load)of adjustment beam and the deformation of the antenna structure is deduced,and the integrated analysis method for realizing the active adjustment of panels is established.Finally,the model and adjustment analysis method of the active surface antenna in this paper is applied to an 8 m antenna,and satisfactory structural analysis results are obtained,which shows the effectiveness and universality of the method,and provides a reference for the modeling and adjustment analysis of the active surface antenna.
文摘In high-altitude nuclear detonations,the proportion of pulsed X-ray energy can exceed 70%,making it a specific monitoring signal for such events.These pulsed X-rays can be captured using a satellite-borne X-ray detector following atmospheric transmission.To quantitatively analyze the effects of different satellite detection altitudes,burst heights,and transmission angles on the physical processes of X-ray transport and energy fluence,we developed an atmospheric transmission algorithm for pulsed X-rays from high-altitude nuclear detonations based on scattering correction.The proposed method is an improvement over the traditional analytical method that only computes direct-transmission X-rays.The traditional analytical method exhibits a maximum relative error of 67.79% compared with the Monte Carlo method.Our improved method reduces this error to within 10% under the same conditions,even reaching 1% in certain scenarios.Moreover,its computation time is 48,000 times faster than that of the Monte Carlo method.These results have important theoretical significance and engineering application value for designing satellite-borne nuclear detonation pulsed X-ray detectors,inverting nuclear detonation source terms,and assessing ionospheric effects.
基金supported by National Natural Science Foundation of China(Grant Nos.11872287 and 51908431)Fund of Shaanxi Key Research and Development Program(Grant No.2019ZDLGY01-10)。
文摘Circumferential yielding lining is able to tolerate controlled displacements without failure,which has been proven to be an effective solution to large deformation problem in squeezing tunnels.However,up to now,there has not been a well-established design method for it.This paper aims to present a detailed analytical computation of support characteristic curve(SCC)for circumferential yielding lining,which is a significant aspect of the implementation of convergence-confinement method(CCM)in tunnel support design.Circumferential yielding lining consists of segmental shotcrete linings and highly deformable elements,and its superior performance mainly depends on the mechanical characteristic of highly deformable element.The deformation behavior of highly deformable element is firstly investigated.Its whole deforming process can be divided into three stages including elastic,yielding and compaction stages.Especially in the compaction stage of highly deformable element,a nonlinear stress-strain relationship can be observed.For mathematical convenience,the stress-strain curve in this period is processed as several linear sub-curves.Then,the reasons for closure of circumferential yielding lining in different stages are explained,and the corresponding accurate equations required for constructing the SCC are provided.Furthermore,this paper carries out two case studies illustrating the application of all equations needed to construct the SCC for circumferential yielding lining,where the reliability and feasibility of theoretical derivation are also well verified.Finally,this paper discusses the sensitivity of sub-division in element compaction stage and the influence of element length on SCC.The outcome of this paper could be used in the design of proper circumferential yielding lining.
文摘This paper proposed a permanent magnet optimization method to suppress the air gap flux density harmonic of permanent magnet synchronous motor(PMSM).The method corrected the effective air gap length of the motor,calculated the magnetization length of the permanent in the case of parallel magnetization,and took the influence of the permanent magnet relative permeability into consideration.Based on these works,for a given sinusoidal air gap flux density waveform,the corresponding structural parameters can be calculated,so as to achieve the optimization of the permanent magnet.By using this method to optimize the shape of the magnet,the fundamental wave of the air gap flux density can be retained to the greatest extent,so as to eliminate harmonics and maintain the output capacity at the same time.The feasibility and accuracy of the method have been verified by finite element analysis(FEA)and prototype machine experiment.This method is simple and time-saving,and has a satisfactory accuracy,which provides a reference method for permanent magnet optimization of PMSM.
文摘The size-dependent nonlinear buckling and postbuckling characteristics of circular cylindrical nanoshells subjected to the axial compressive load are investigated with an analytical approach. The surface energy effects are taken into account according to the surface elasticity theory of Gurtin and Murdoch. The developed geometrically nonlinear shell model is based on the classical Donnell shell theory and the von K′arm′an's hypothesis. With the numerical results, the effect of the surface stress on the nonlinear buckling and postbuckling behaviors of nanoshells made of Si and Al is studied. Moreover, the influence of the surface residual tension and the radius-to-thickness ratio is illustrated.The results indicate that the surface stress has an important effect on prebuckling and postbuckling characteristics of nanoshells with small sizes.