With the rapid development of water facilities, hydroelectric projects, highways and railways in China, beam-anchor reinforcement has been widely used to stabiliZe slopes in recent years. But the theory for the design...With the rapid development of water facilities, hydroelectric projects, highways and railways in China, beam-anchor reinforcement has been widely used to stabiliZe slopes in recent years. But the theory for the design of beam-anchor reinforcement is far behind the application. Cross beam-ground anchor reinforcement is a combination of beams and anchors forming a new structure to prevent slope sliding. The forces in the beams are discussed using theoretical analysis and numerical modeling. The Winkler model is used to analyze the beams, and reasonable values of λ, length, spacing and cantilevered length for the beams are determined through a theoretical analysis. A three-dimensional finite element method is adopted to model the interaction of the beams and soils and a structure analysis is applied to treat the beams and to study the stress distribution in external and internal beams. The analytical results show that it is better to satisfy λ≥2π, the spacing between anchors ls should be lsλ〈π/2 and cantilever length should be （0.3-0.5）ls for the optimum design. The numerical results show that the same design can be used for all beams in different directions, including the internal and external beams. The application of the analytical method for reinforcement beam analysis is acceptable. It is better to choose a safety coefficient of 1.3 for design based on the analytical method for safety.展开更多
During the construction of some large-scale rock engineering,high-steep slopes and insufficient slope stability induced by unloading fissures are often encountered.For the reinforcement of these slopes,some techniques...During the construction of some large-scale rock engineering,high-steep slopes and insufficient slope stability induced by unloading fissures are often encountered.For the reinforcement of these slopes,some techniques(including conventional pre-stressed anchoring cable and unconventional anchoring hole)are usually utilized,however,having several obvious defects.Thus,it is very difficult for a designer to design an efficient reinforcement scheme for the high-steep slopes.For this reason,the authors develop the pre-stressed anchoring beam technique,in which tensile capacity of pre-stressed structures are fully utilized.It is analyzed that the new technique is characterized by multi-functions,including engineering investigation,efficient reinforcement,drainage,monitoring and urgent strength supplement,and hoped to be extensively applicable in the reinforcement of high-steep slopes.展开更多
文摘With the rapid development of water facilities, hydroelectric projects, highways and railways in China, beam-anchor reinforcement has been widely used to stabiliZe slopes in recent years. But the theory for the design of beam-anchor reinforcement is far behind the application. Cross beam-ground anchor reinforcement is a combination of beams and anchors forming a new structure to prevent slope sliding. The forces in the beams are discussed using theoretical analysis and numerical modeling. The Winkler model is used to analyze the beams, and reasonable values of λ, length, spacing and cantilevered length for the beams are determined through a theoretical analysis. A three-dimensional finite element method is adopted to model the interaction of the beams and soils and a structure analysis is applied to treat the beams and to study the stress distribution in external and internal beams. The analytical results show that it is better to satisfy λ≥2π, the spacing between anchors ls should be lsλ〈π/2 and cantilever length should be （0.3-0.5）ls for the optimum design. The numerical results show that the same design can be used for all beams in different directions, including the internal and external beams. The application of the analytical method for reinforcement beam analysis is acceptable. It is better to choose a safety coefficient of 1.3 for design based on the analytical method for safety.
基金This paper was financially supported by the Project 973 of Chinese National Program of Basic Research （No. 2002CB412701） the National Natural Science Foundation （No. 40502027）the Project of Innovation Program of Chinese Academy of Sciences （No. KZCX2-306）.
文摘During the construction of some large-scale rock engineering,high-steep slopes and insufficient slope stability induced by unloading fissures are often encountered.For the reinforcement of these slopes,some techniques(including conventional pre-stressed anchoring cable and unconventional anchoring hole)are usually utilized,however,having several obvious defects.Thus,it is very difficult for a designer to design an efficient reinforcement scheme for the high-steep slopes.For this reason,the authors develop the pre-stressed anchoring beam technique,in which tensile capacity of pre-stressed structures are fully utilized.It is analyzed that the new technique is characterized by multi-functions,including engineering investigation,efficient reinforcement,drainage,monitoring and urgent strength supplement,and hoped to be extensively applicable in the reinforcement of high-steep slopes.
