Mechanism of high-preload support based on the NPR anchor cable in layered soft rock tunnels

The control of large deformation problems in layered soft rock tunnels needs to solve urgently.The roof problem is particularly severe among the deformation issues in tunnels.This study first analyzes the asymmetric deformation modes in layered soft rock tunnels with large deformations.Subsequently,we construct a mechanical model under ideal conditions for controlling the roof of layered soft rock tunnels through high preload with the support of NPR anchor cables.The prominent roles of long and short NPR anchor cables in the support system are also analyzed.The results indicate the significance of high preload in controlling the roof of layered soft rock tunnels.The short NPR anchor cables effectively improve the integrity of the stratified soft rock layers,while the long NPR anchor cables effectively mobilize the self-bearing capacity of deep-stable rock layers.Finally,the high-preload support method with NPR anchor cables is validated to have a good effect on controlling large deformations in layered soft rock tunnels through field monitoring data.

Applied on bolting-cable anchor support of full-seam roadway in weaker thick coal seam

The designing method and the supporting mechanism of both bolt and small cable anchor for full seam roadway in the weaker thick coal seam are systematically analyzed, and the construction technology and the supporting results are briefly summarized.

Numerical simulation of rockburst disaster and control strategy of constant resistance and large deformation anchor cable in Gaoloushan tunnel

The Gaoloushan Tunnel in Longnan City,Gansu Province,China,frequently experiences rockburst disasters due to high in-situ stress.Managing rockburst in deep-buried tunnels remains a challenging issue.This paper employs RFPA(Rock Failure Process Analysis)software to establish a calculation model of constant resistance and large deformation(CRLD)anchorages and analyzes the effects of different support methods and pre-stress levels on rockburst.We simulate the process of tunnel rockburst disasters and find that ordinary anchor support incurs rockburst on the right arch waist and arch top,forming a V-shaped explosion pit.CRLD anchor support has several advantages in rockburst control,such as more uniform stress distribution in the surrounding rock,a uniform distribution of plastic zones,less noticeable damage to the tunnel,and effective control of the arch top displacement.The effectiveness of the CRLD anchor support under varying pre-stress conditions shows that a higher prestress results in a smaller plastic zone of the surrounding rock and arch top displacement and a lower number of acoustic emission signals,which better explains the excavation compensation effect.Moreover,adding long anchorages in the deep surrounding rock area can better control rockburst and reduce surrounding rock deformation.Based on these findings,we propose a comprehensive control system that combines long and short anchorages and provides the optimal scheme based on calculations.Therefore,by using high-prestress CRLD anchor support and the combination of long and short anchorages at critical positions,we can enhance the integrity of the surrounding rock,effectively absorb the energy released by the surrounding rock deformation,and reduce the incidence of rockburst disasters.

Parameter analysis of anchor bolt support for large-span and jointed rock mass

In order to obtain the optimal parameters of anchor bolt supporting system for large-span and jointed rock mass in Kaiyang Phosphor Mine, it is expensive and unavailable with the method of in-situ experiments. This paper describes a numerical modeling with discrete element method for the supporting effects of different type of anchor bolts. The anchor bolts with variant length of 0.5m, 0.8m, 1.0m, diameter of 10mm, 15mm, 20mm, setting spacing of 3.0m, 2.5m, 2.0m, and setting angle of 10°, 20°, 30°, are simulated respectively. The results show that there exist optimal parameters of anchor bolt support for large-span and jointed rock mass. For the bolt support of the concerning, the optimal length is 2.53.5m, the diameter is 2535mm, the spacing is 0.50.6m, and the setting angle is 105°.

Anchoring mechanism and application of hydraulic expansion bolts used in soft rock roadway floor heave control

Comparing with the resin bolt, the hydraulic expansion bolt has different anchoring mechanism and application advantage. According to the working mechanism of the hydraulic expansion bolt, its anchoring force is expressed in four forms including support anchoring force, tension anchoring force, expansion anchoring force and tangent anchoring force, and their values can be obtained on the basis of each calculation formula. Among them, the expansion anchoring force, which is the unique anchoring force of the hydraulic expansion bolt, can provide confining pressure to increase the strength of rock. Aiming at solving the problem of stability control in the soft rock roadway in Jinbaotun Coal Mine which has a double layer of 40 U-type sheds and cannot provide enough resistance support to control floor heave, the study reveals the mechanism of floor heave in the soft rock roadway, and designs the reasonable support parameters of the hydraulic expansion bolts. The observed results of floor convergence indicate that the hydraulic expansion bolts can prevent the development and flow of the plastic zone in the floor rock to control floor heave. Research results enrich the control technology in the soft rock roadway.

Hydrogeochemical modelling of corrosive environment contributing to premature failure of anchor bolts in underground coal mines

Anchor bolts are commonly used throughout underground mining and tunnelling operations to improve roof stability.However,premature failures of anchor bolts are significant safety risks in underground excavations around the world due to susceptible bolt materials,a moist and corrosive environment and tensile stress.In this paper,laboratory experiments and hydrogeochemical models were combined to investigate anchor bolt corrosion and failure associated with aqueous environments in underground coal mines.Experimental data and collated mine water chemistry data were used to simulate bolt corrosion reactions with groundwater and rock materials with the PHREEQC code.A series of models quantified reactions involving iron and carbon under aerobic and anaerobic conditions in comparison with ion,pH and pE trends in experimental data.The models showed that corrosion processes are inhibited by some natural environmental factors,because dissolved oxygen would cause more iron from the bolts to oxidize into solution.These interdisciplinary insights into corrosion failure of underground anchor bolts confirm that environmental factors are important contributors to stress corrosion cracking.

Analysis on the anchor mechanism of the full length resin bolt

The purpose of this paper is to reveal the stress distribution characteristic along the full length anchor bolt. Based on the mechanic model set up, the author calculated the anchor mechanism of the full length resin rock bolt. The stress distribution characteristic is different according to different type of surrounding rock. The conclusion is important to optimize the roadway bolt support design.

穿断层隧道NPR锚索支护体系抗震特性振动台试验研究

为研究具有负泊松比效应(negative Poisson’s ratio,NPR)的恒阻大变形锚索在地震作用下的吸能特性与动力响应规律,利用振动台开展含断层隧道使用普通锚索支护以及使用NPR锚索支护的振动台物理模型试验,对比分析地震作用下处于不同围岩条件中以及使用不同锚索进行支护时隧道结构的动力响应规律。研究结果表明:在同一地震波作用下,使用NPR锚索进行支护的隧道结构破坏程度与使用普通锚索进行支护的隧道结构相比有明显的改善,表明NPR锚索在地震作用下具有良好的吸能特性,能够为隧道结构提供有效支护;通过对比分析普通锚索与NPR锚索的锚索轴力时程曲线可知,在地震波作用下,普通锚索会发生破断现象,轴力突降至零,而NPR锚索的高恒阻力能够持续提供有效支护;分析隧道结构各测点的加速度、应变、土压力等动力响应可知,隧道断层区域在地震作用下的动力响应更为明显,隧道结构在地震作用下呈现出拱肩→拱腰→拱顶的破坏规律,这一研究成果为类似隧道工程的支护对策提供了理论参考。

深基坑双排微型桩-锚-撑组合支护结构受力与变形特性

为深入研究深厚杂填土地层深基坑微型桩-锚-撑组合支护结构随基坑开挖的受力与变形演化规律,首先,依托青岛市某深基坑工程开展双排微型桩-锚-撑原位试验,分析开挖工况下前、后排桩的桩身弯矩分布规律;然后,结合ABAQUS有限元模拟方法,明确微型桩、预应力锚索与钢支撑之间的协同作用及基坑变形规律;最后,揭示微型桩桩径变化、支护结构作用对桩身受力及基坑变形的影响机制。研究结果表明:增加开挖深度引起桩身正弯矩和负弯矩不断增大,极值点位置不断下移,桩身弯矩整体呈正“S”形分布;开挖至基底,前排桩的桩身反弯点分别位于钢支撑下方0.5 m和开挖面位置,后排桩的桩身反弯点分别位于钢支撑下方0.5 m和开挖面下方1.0 m范围内;基坑开挖竖向影响范围约为1.35H(H为基坑开挖深度),桩径增加近1倍,土体水平位移仅减少约51%,且随桩径继续增加,其对于限制基坑变形效果不显著;相较于桩锚支护结构,桩-锚-撑支护结构作用下,前、后排桩的最大水平位移分别减小34.9%和27.3%,基坑土体的最大水平位移减小46.0%。

锚杆钻车运行中支护承载结构及围岩受力变形分析

目的针对单轨液压锚杆钻车运行过程中支护承载结构及围岩受力变形难以观测分析的问题。方法利用研发的CMMD4-35煤矿用单轨液压锚杆钻车,结合长城五矿1902S回风巷巷道现场情况综合分析钻车在大断面大倾角巷道动态运行的支护、承载及围岩协同受力变形特征。结果研究表明,钻车运行过程中吊挂板的受力变形在悬吊点处均达到峰值,工字钢在悬吊点的部分位移最小,与钻车直接接触的部分受力最大;锚索中部主要受到拉应力,靠近巷道一侧主要受到剪应力,而巷道两帮的锚杆拉应力主要分布在靠近巷道内部一侧;巷道顶板悬吊点处位移最大,两帮靠近顶板位移高于底板处,而巷道偏向低帮处底板的位移大于高帮处;以单轨液压锚杆钻车为核心的新型配套工艺可以有效控制围岩变形,支护效果良好,比传统以掘锚一体机为中心的机器化工艺掘进效率更高。结论研究明确了CMMD4-35煤矿用单轨液压锚杆钻车在实际应用的可行性,解决了现有掘锚一体机难以在复杂地质条件下大断面煤巷自动化掘进支护的问题,提升了煤巷支护效果掘进效率,为CMMD4-35煤矿用单轨液压锚杆钻车的现场应用提供了理论依据。

既有隧道不同扩挖宽度下锚杆参数的优化

以黄山洞隧道工程为依托,通过对现场数据的监测和利用有限元分析软件Midas GTS NX进行数值模拟,分析了不同扩挖宽度下隧道拱顶沉降值、周边收敛值和围岩有效应力变化的规律,并改变锚杆的长度和锚杆间距,分析在不同锚杆长度下围岩有效应力、衬砌应力以及锚杆应力的变化规律,确定了不同扩挖宽度下最优的锚杆长度和锚杆间距.研究结果表明:随着扩挖宽度的增加,围岩有效应力由大至小依次为拱脚处压应力、拱腰处压应力、拱顶处压应力和仰拱处拉应力;拱顶处压应力随扩挖宽度的增大而减小,拱腰处压应力随扩挖宽度的增大而增大,但增大趋势不明显;受单侧扩挖方式的影响,扩挖侧的应力大于非扩挖侧;拱脚处受到应力集中的影响,其压应力随着扩挖宽度的增大而增大;扩挖宽度为1.5~2.5 m时的最优锚杆长度和间距分别为2.5 m和1.7 m,扩挖宽度为3.5~4.5 m时二者分别为3.0 m和1.2 m.

乌兰木伦煤矿大断面硐室围岩变形破坏规律及控制

针对煤矿井下巷道大断面硐室的围岩变形破坏问题,以乌兰木伦煤矿井下分选及充填大断面硐室为研究对象,采用相似模拟实验方法,进行单调递增加载和恒定荷载加载单轴压缩实验,对大断面硐室围岩变形破坏规律进行了研究。结果表明:①2种加载方式在压密阶段、弹性变形阶段及微破裂稳定发展阶段破坏演化和变形位移趋势相似。②采用单调递增加载方式的试样裂纹较少但裂纹缝隙较大,试样沿着主裂纹突然发生破断,期间有大量碎屑飞出,试样变形位置主要集中在围岩边界,破坏时释放能量较多,但峰后释放能量持续时间较短。③采用恒定荷载加载方式的试样应力保持不变,应变缓慢增加,期间产生大量微小裂纹,试样变形位置主要围绕在硐室周围,破坏时释放能量较少,但峰后释放能量持续时间较长。依据大断面硐室围岩变形破坏规律,提出了锚杆索支护方案:硐室顶部打长锚索,将顶板和上方坚硬岩石连成整体;在硐室煤岩交界处打倾斜锚杆,将煤岩交界面与周围岩体紧密连接。数值模拟结果表明,支护后围岩应力、位移、塑性区均明显减小,围岩稳定性大幅提高,支护效果良好。

煤巷钻锚一体化快速掘进技术与装备及应用

分析煤巷掘进技术与装备现状及存在的问题,介绍研发的钻锚一体化快速掘进新模式、新技术、新装备及井下应用效果。研发出钻锚一体化锚杆支护技术与设备,包括钻锚一体化锚杆、泵注式锚固剂、钻锚一体化钻臂、钻箱、锚杆仓、锚固剂泵注系统及智能控制系统,将传统树脂锚固锚杆安装6道工序简化为1道连续工序,实现了锚杆自动化“一键”打设,单根锚杆作业时间由原来5~6 min减少为3 min。研发出自动化喷涂支护技术与装备,包括高强、速凝、抗变形喷涂护表材料,抗拉强度超过9 MPa,断裂伸长率超过100%,黏结强度高于3 MPa;研发出6自由度喷涂系统,可实现随掘自动化快速喷涂作业。研发出巷道随掘变形动态监测技术与系统,实现随掘大粉尘、多干扰、低照度环境下的巷道表面变形监测,监测精度能够满足围岩稳定性评价要求。提出煤巷掘支锚运分区并行协同快速掘进新模式,研制出钻锚一体化快速掘进成套装备。对试验矿井陕西陕煤曹家滩煤矿回采巷道掘进过程中围岩位移和稳定性进行了监测,在时间上,巷道掘出2~3 h后80%以上的围岩位移已经发生;在空间上,距离掘进工作面相当于2倍巷道宽度的位置,90%以上的围岩位移已经完成。快速掘进引起的巷道围岩位移在很短时间内就基本完成,要求支护必须及时且快速。在曹家滩煤矿10 m超大采高综采工作面特大断面回采巷道完成近6000 m的巷道掘进工程,打设钻锚一体化锚杆60000余根。锚杆施工时间、支护用工人数及作业人员劳动强度大幅降低,掘进速度、效率及自动化水平显著提高。试验巷道顶板位移量小、完整稳定,支护效果良好。煤巷钻锚一体化快速掘进技术与装备井下试验取得成功,具备了特大断面煤巷月掘进进尺1500~2000 m的能力。

杂填土地层深基坑微型桩-锚-撑组合支护体系受力特性原位试验

为深入研究杂填土地层深基坑桩-锚-撑组合支护体系受力特性,依托青岛市某深基坑工程开展微型桩-锚-撑原位试验,分析不同开挖工况下双排微型钢管桩桩身弯矩与预应力锚索轴力的演化规律,揭示该支护体系下前、后排桩的受力性状、预应力锚索应力分布特征,探讨邻近建筑物、基坑暴露时间及钢支撑拆除对该支护体系内力的影响。研究结果表明:1)在基坑开挖过程中,前排桩在受力中起主导作用;当开挖至基底时,桩身最大正、负弯矩极值呈现增大趋势,且极值点不断下移,开挖面以上桩身弯矩均呈正“S”型分布。2)开挖深度增加引起开挖面上、下1.0 m范围内桩身弯矩显著增大,前排桩桩身的反弯点分别位于钢支撑下方0.5 m、开挖面位置。3)在开挖过程中,锚索轴力沿埋深方向呈现减小趋势,锚固段前端1.5 m之后的轴力基本不变或呈微小波动。4)锚索锚固段应力高度集中在锚固段前端4.0 m以内的区域,约为锚固段长度的44%,锚固段末端基本未产生轴力,可对该段长度进行优化处理。5)邻近建筑物对微型钢管桩桩身受力影响较小;随着基坑暴露时间增加,桩身弯矩呈微小增长趋势;钢支撑拆除后,前排桩的弯矩变化集中在0.38H~0.96H(H为基坑开挖深度)。6)桩-锚-撑组合支护体系能够较好地限制基坑变形,选择合理的支撑预应力是该类基坑设计的关键。

基于黏聚力模型的螺纹钢锚杆拉拔数值模拟

为研究螺纹钢锚杆锚固结构变形破坏机理,采用ABAQUS软件建立锚固结构轴对称数值模型,基于黏聚力模型,开展数值试验,获得锚固结构拉拔过程中锚杆变形、荷载以及锚固体位移场分布演化规律。试验结果表明:在相同的拉拔位移下,小肋间距锚杆也能够承受更高的拉拔荷载,表明小肋间距锚杆对巷道围岩变形的承载能力更强;在锚杆拉拔过程中,随着拉拔位移的增加,岩体破坏和离层区域呈倒碗形向岩体深部扩散,当拉拔位移增加至9.06 mm后,岩体锚固段末端处位移增速加大,岩体的最大位移为4.79 mm,出现在锚固段端口处,最终导致锚固段基体破坏;锚杆轴力与锚杆肋间距呈负相关,锚杆的轴力随着肋间距的减小而增加。

高延伸率锚索动态力学特性及工程应用

传统锚索延伸率低、抗冲击能力差,在强冲击载荷作用下易出现脆性破断失效,导致巷道出现冒顶、冲击地压事故等问题。基于此,自主开发了具有高强度、高延伸率及高抗冲击等特性的锚索,采用实验室试验、理论分析及现场试验等综合手段,分析了高延伸率锚索的静、动载力学性能,研究了高延伸率锚索化学成分、金相组织和夹杂物与普通锚索的差异,提出了高延伸率锚索支护吸能原理,并将高延伸率锚索在现场进行了应用。研究结果表明:静载作用下,高延伸率锚索抗拉强度为1790 MPa,最大力总延伸率8.1%,是普通锚索的1.61~2.25倍;动载作用下,高延伸率锚索钢丝不易散开,破断载荷与普通锚索基本相同,断后伸长率分别是锚索A、B、C的1.82倍、1.68倍和1.52倍,单位长度吸能量分别是锚索A、B、C的2.54倍、1.99倍和1.70倍,高延伸率锚索塑性变形能力更强,吸能能力更高。高延伸率锚索通过在冶炼和轧制工艺过程中控制有害化学元素和有益化学元素含量、细化金相组织及减少夹杂物尺寸和数量等方式提高了钢丝的塑性变形能力,进而提高锚索整体的抗冲击性能。高延伸率锚索在现场应用过程中经受了多次大能量冲击后,巷道支护效果良好,高延伸率锚索未出现破断,有效控制了巷道冲击破坏。

硬岩地层超深基坑桩锚支护体系受力与变形特性实测分析

为探究硬岩地层超深基坑桩锚支护体系随基坑开挖的受力与变形演化规律,依托于崂山公卫中心基坑支护工程,对南侧支护完成区域基坑的预应力锚索轴力、基坑水平和竖向位移进行了实时监测,分析桩锚支护体系在该地质条件下的力学性能,探讨锚索轴力急速下降与基坑水平位移增大的影响因素。研究表明:预应力锚索轴力持续、急速的下降与基坑紧邻原状山体的土压力和北侧后挖区域的持续施工有关,工程中采取预应力锚索2次补偿张拉适用效果良好;基坑最大水平位移为19.98 mm,最大竖向位移为12.11 mm,南侧支护完成区域基坑支护体系的变形受后续施工区域的影响明显;桩锚支护体系在硬岩及土岩二元地层超深基坑中具有较好的适用性和可靠性。类似工程支护结构设计应重视周边地质环境、邻近区域持续施工等因素的影响。

韩城矿区破碎围岩巷道注浆锚索加固机理研究

以陕西韩城桑树坪矿3315运输巷道为研究背景,通过对注浆锚索破碎围岩巷道加固作用的研究,揭示了注浆锚索的加固机理,提出了软弱煤层巷道支护设计的原则,并进一步优化支护方案,通过采用高强度锚索对围岩进行加固,提升围岩的整体稳定性,达到有效防止围岩变形和损伤的效果。根据监测结果得出,加固后巷道顶板下沉量由原支护方式的帮部收敛量平均为32.7 mm,顶板的平均下沉量为28.6 mm,围岩的平均变形量仅为原支护方案的15.6%,顶板变形稳定后,巷道顶板离层量较小,围岩稳定后平均深基点位移仅为原支护方案的55%。说明优化后的支护方案能够很好控制巷道的围岩变形,有效控制了锚固区范围内围岩的离层,减小了顶板弯曲沉降,增强了顶板的稳定性,该方案可有效控制围岩变形。研究为软弱煤层巷道的支护设计提供了重要的理论依据和工程经验,并为软弱煤层巷道支护提供借鉴和指导。

富水砂层深基坑支护结构模拟分析与优化

基于北京市通州区某深基坑工程,依据降水开挖及支护方案,使用midas GTS NX软件建模研究了在土钉墙-桩锚联合支护下,不同锚杆条件对富水砂层深基坑开挖变形特征的影响,并基于实际施工方案进行支护结构优化。结果表明,桩锚支护中预应力锚杆能够有效加固深层土体,约束其水平位移,显著改善基坑稳定性,相较于无锚杆情况,坡顶和桩顶的水平位移最大值分别减少了60.9%和75.4%;桩锚支护情况下,桩身侧移随桩直径的增大先减小后增大,存在最优桩直径范围,且该范围受到锚杆预应力大小的影响。

沿空留巷动压区锚索主动支护技术研究

为解决车集煤矿深部工作面高矿压条件下沿空留巷变形严重问题,根据2611工作面生产地质资料,采用经验计算和FLAC^(3D)数值模拟等方法开展矿压分析、大直径锚索主动支护数值模拟,由结果可知,车集煤矿2611工作面锚杆+普通锚索+大直径锚索加强支护手段支护效果远优于其他支护形式。通过工程实践:2611下巷沿空留巷动压段超前支承压力影响范围约50 m,工作面后约150 m,沿空留巷切顶卸压大直径锚索主动支护技术,适用于车集煤矿深部工作面沿空留巷支护,能够有效控制围岩应力,将巷道变形控制在合理范围内。