Helmholtz decomposition with a scalar Poisson equation in elastic anisotropic media

P-and S-wave separation plays an important role in elastic reverse-time migration.It can reduce the artifacts caused by crosstalk between different modes and improve image quality.In addition,P-and Swave separation can also be used to better understand and distinguish wave types in complex media.At present,the methods for separating wave modes in anisotropic media mainly include spatial nonstationary filtering,low-rank approximation,and vector Poisson equation.Most of these methods require multiple Fourier transforms or the calculation of large matrices,which require high computational costs for problems with large scale.In this paper,an efficient method is proposed to separate the wave mode for anisotropic media by using a scalar anisotropic Poisson operator in the spatial domain.For 2D problems,the computational complexity required by this method is 1/2 of the methods based on solving a vector Poisson equation.Therefore,compared with existing methods based on pseudoHelmholtz decomposition operators,this method can significantly reduce the computational cost.Numerical examples also show that the P and S waves decomposed by this method not only have the correct amplitude and phase relative to the input wavefield but also can reduce the computational complexity significantly.

On an Anisotropic Equation with Critical Exponent and Non-Standard Growth Condition

Using variational methods, we prove the existence of a nontrivial weak solution for the problem{-∑i=1^Nδxi（｜δxiu｜pi-2δxiu）=λα（x）｜u｜q（x）-2u＋｜u｜p＊-2u,in Ω,u=0 inδΩ,where Ω R^N（N≥3） is a bounded domain with smooth boundary δΩ,2≤pi〈N,i=1,N,q：Ω→（1,p＊）is a continuous function, p＊ =N/∑i=1^N 1/pi-1 is the critical exponent for this class of problem, and λ is a parameter.

VORTEX DYNAMICS OF THE ANISOTROPIC GINZBURG-LANDAU EQUATION

In this article, using coordinate transformation and Gronwall inequality, we study the vortex motion law of the anisotropic Cinzburg-Landau equation in a smooth bounded domain Ω （R^2,that is ,Эtuε=j,k=1∑2（ajkЭxkuε）xj＋ε^2^-b（x）（1-｜uε｜^2）uε,x∈Ω,and conclude that each vortex,bj（t）（j=1,2,…,N）satisfies dt^-dbj（t）=-（a（bj（t））^-a1k（bj（t））Эxka（bj（t））,a（aj（t））^-a2k（bj（t））Эxka（bj（t）））,where a（x）=√a11a22-a12^2. We prove that all the vortices are pinned together to the critical points of a（x）. Furthermore, we prove that these critical points can not be the maximum points.

An unsymmetric constitutive equation for anisotropic viscoelastic fluid

A continuum constitutive theory of corotational derivative type is developed for the anisotropic viscoelastic fluid-liquid crystalline （LC） polymers. A concept of anisotropic viscoelastic simple fluid is introduced. The stress tensor instead of the velocity gradient tensor D in the classic Leslie-Ericksen theory is described by the first Rivlin-Ericksen tensor A and a spin tensor W measured with respect to a co-rotational coordinate system. A model LCP-H on this theory is proposed and the characteristic unsymmetric behaviour of the shear stress is predicted for LC polymer liquids. Two shear stresses thereby in shear flow of LC polymer liquids lead to internal vortex flow and rotational flow. The conclusion could be of theoretical meaning for the modern liquid crystalline display technology. By using the equation, extrusion-extensional flows of the fluid are studied for fiber spinning of LC polymer melts, the elongational viscosity vs. extension rate with variation of shear rate is given in figures. A considerable increase of elongational viscosity and bifurcation behaviour are observed when the orientational motion of the director vector is considered. The contraction of extru- date of LC polymer melts is caused by the high elongational viscosity. For anisotropic viscoelastic fluids, an important advance has been made in the investigation on the constitutive equation on the basis of which a seriesof new anisotropic non-Newtonian fluid problems can be addressed.

Wellposedness for anisotropic rotating fluid equations

The weUposedness problem for an anisotropic incompressible viscous fluid in R3, ro- tating around a vector B（t, x） ：= （b1 （t, x）, b2 （t, x）, b3 （t, x））, is studied. The global wellposedness in the homogeneous case （B = e3） with sufficiently fast rotation in the space B0,1/2 is proved. In the inhomogeneous case （B = B（t, xh））, the global existence and uniqueness of the solution in B0,1/2 are obtained, provided that the initial data are sufficient small compared to the horizontal viscosity. Furthermore, we obtain uniform local existence and uniqueness of the solution in the x same function space. We also obtain propagation of the regularity in B2,11/2 under the additional assumption that B depends only on one horizontal space variable.

A PRIORI ESTIMATES TO THE MAXIMUM MODULUS OF GENERALIZED SOLUTIONS OF A CLASS OF QUASILINEAR ELLIPTIC EQUATIONS WITH ANISOTROPIC GROWTH CONDITIONS

In this paper we give a priori estimates for the maximum modulus of generalizedsolulions of the quasilinear elliplic equations irith anisotropic growth condition.

On the Well-Posedness Problem of the Anisotropic Porous Medium Equation with a Variable Diffusion Coefficient

The initial-boundary value problem of an anisotropic porous medium equation■is studied.Compared with the usual porous medium equation,there are two different characteristics in this equation.One lies in its anisotropic property,another one is that there is a nonnegative variable diffusion coefficient a(x,t)additionally.Since a(x,t)may be degenerate on the parabolic boundary∂Ω×(0,T),instead of the boundedness of the gradient|∇u|for the usual porous medium,we can only show that∇u∈L^(∞)(0,T;L^(2)_(loc)(Ω)).Based on this property,the partial boundary value conditions matching up with the anisotropic porous medium equation are discovered and two stability theorems of weak solutions can be proved naturally.

Mesh Conditions of the Preserving-Maximum-Principle Linear Finite Volume Element Method for Anisotropic Diffusion-Convection-Reaction Equations

We develop mesh conditions for linear finite volume element approximations of anisotropic diffusionconvectionreaction problems to satisfy the discrete maximum principle.We obtain the sufficient conditions to gurantee the both upper and lower bounds of the numerical solution when each angle of arbitrary triangle is O(∥q∥_∞h+∥g∥_∞h~2)-acute and h is small enough,where h denotes the mesh size,q and g are coefficients of the convection and reaction terms,respectively.To deal with the convection-dominated problems,we use the upwind triangle technique.For such scheme,the mesh condition can be sharper to O(∥g∥_∞h~2)-acute.Some numerical examples are presented to demonstrate the theoretical results.

Nonlinear Degenerate Anisotropic Elliptic Equations with Variable Exponents and L1 Data

This paper is devoted to the study of a nonlinear anisotropic elliptic e-quation with degenerate coercivity,lower order term and L1 datum in appropriate anisotropic variable exponents Sobolev spaced We obtain the existence of distribu­tional solutions.

Convergence of the Modified Discrete Ordinates Method for the Anisotropic Scattering Transport Equation

Criticality problem of nuclear tractors generMly refers to an eigenvalue problem for the transport equations. In this paper, we deal with the eigenvalue of the anisotropic scattering transport equation in slab geometry. We propose a new discrete method which was called modified discrete ordinates method. It is constructed by redeveloping and improving discrete ordinates method in the space of L1（X）. Different from traditional methods, norm convergence of operator approximation is proved theoretically. Furthermore, convergence of eigenvalue approximation and the corresponding error estimation are obtained by analytical tools.

Anisotropic mesh generation methods based on ACVT and natural metric for anisotropic elliptic equation

Anisotropic meshes are known to be well-suited for problems which exhibit anisotropic solution features. Defining an appropriate metric tensor and designing an efficient algorithm for anisotropic mesh gen- eration are two important aspects of the anisotropic mesh methodology. In this paper, we are concerned with the natural metric tensor for use in anisotropic mesh generation for anisotropic elliptic problems. We provide an algorithm to generate anisotropic meshes under the given metric tensor. We show that the inverse of the anisotropic diffusion matrix of the anisotropic elliptic problem is a natural metric tensor for the anisotropic mesh generation in three aspects： better discrete algebraic systems, more accurate finite element solution and superconvergence on the mesh nodes. Various numerical examples demonstrating the effectiveness are presented.

A Note on the Illposedness for Anisotropic Nonlinear Schrdinger Equation

In this short note, we show the illposedness of anisotropic Schroedinger equation in L^2 if the growth of nonlinearity is larger than a threshold power pc which is also the critical power for blowup, as Fibich, Ilan and Schochet have pointed out recently. The illposedness in anisotropic Sobolev space Hk,d-d^2s,s where 0 〈 s 〈 sc, sc =d/2-k/4-2/p-1, and the illposedness in Sobolev space of negative order H^s, s 〈 0 are also proved.

Fundamental Solution of the Anisotropic Porous Medium Equation

We establish the existence of fundamental solutions for the anisotropic porous medium equation, ut = ∑n i=1（u^mi）xixi in R^n × （O,∞）, where m1,m2,..., and mn, are positive constants satisfying min1≤i≤n{mi}≤ 1, ∑i^n=1 mi 〉 n - 2, and max1≤i≤n{mi} ≤1/n（2 ＋ ∑i^n=1 mi）.

Image restoration using total variation and anisotropic diffusion equation

This paper proposes a new model for the image restoration which combines the total variation minimization with the“pure”anisotropic diffusion equation of Alvarez and Morel.According to the introduction of new diffusion term,this model can not only remove noise but also enhance edges and keep their locality.And it can also keep textures and large-scale fine features that are not characterized by edges.Due to these favorable characteristics,the processed images turn much clearer and smoother,meanwhile,their significant details are kept,which results in appealing vision.