A modified failure criterion is proposed to determine the strength of transversely isotropic rocks. Me-chanical properties of some metamorphic and sedimentary rocks including gneiss, slate, marble, schist, shale, sand...A modified failure criterion is proposed to determine the strength of transversely isotropic rocks. Me-chanical properties of some metamorphic and sedimentary rocks including gneiss, slate, marble, schist, shale, sandstone and limestone, which show transversely isotropic behavior, were taken into consider-ation. Afterward, introduced triaxial rock strength criterion was modified for transversely isotropic rocks. Through modification process an index was obtained that can be considered as a strength reduction parameter due to rock strength anisotropy. Comparison of the parameter with previous anisotropy in-dexes in literature showed reasonable results for the studied rock samples. The modified criterion was compared to modified Hoek-Brown and Ramamurthy criteria for different transversely isotropic rocks. It can be concluded that the modified failure criterion proposed in this study can be used for predicting the strength of transversely isotropic rocks.展开更多
In fractured reservoir beds, fracture characteristics affect seismic wave response. Fractured models based on the Hudson＇s fractured medium theory were constructed in our laboratory by a backfilling technique. For th...In fractured reservoir beds, fracture characteristics affect seismic wave response. Fractured models based on the Hudson＇s fractured medium theory were constructed in our laboratory by a backfilling technique. For the same fracture density, the variations of the velocity and amplitude of the primary wave and shear wave parallel and perpendicular to the fracture were observed by altering the diameter （scale） of the penny-shaped fracture disk. The model test indicated that an increase of fracture scale increased the velocity and amplitude of the primary wave by about 2%. When the shear wave propagated parallel to the fracture, the velocity of the fast shear wave hardly changed, while the velocity of slow shear wave increased by 2.6% with increasing fracture scale. The results indicated that an increase of fracture scale would reduce the degree of anisotropy of the shear wave. The amplitudes of slow shear waves propagating parallel and perpendicular to fractures decreased with increasing fracture scale.展开更多
文摘A modified failure criterion is proposed to determine the strength of transversely isotropic rocks. Me-chanical properties of some metamorphic and sedimentary rocks including gneiss, slate, marble, schist, shale, sandstone and limestone, which show transversely isotropic behavior, were taken into consider-ation. Afterward, introduced triaxial rock strength criterion was modified for transversely isotropic rocks. Through modification process an index was obtained that can be considered as a strength reduction parameter due to rock strength anisotropy. Comparison of the parameter with previous anisotropy in-dexes in literature showed reasonable results for the studied rock samples. The modified criterion was compared to modified Hoek-Brown and Ramamurthy criteria for different transversely isotropic rocks. It can be concluded that the modified failure criterion proposed in this study can be used for predicting the strength of transversely isotropic rocks.
文摘In fractured reservoir beds, fracture characteristics affect seismic wave response. Fractured models based on the Hudson＇s fractured medium theory were constructed in our laboratory by a backfilling technique. For the same fracture density, the variations of the velocity and amplitude of the primary wave and shear wave parallel and perpendicular to the fracture were observed by altering the diameter （scale） of the penny-shaped fracture disk. The model test indicated that an increase of fracture scale increased the velocity and amplitude of the primary wave by about 2%. When the shear wave propagated parallel to the fracture, the velocity of the fast shear wave hardly changed, while the velocity of slow shear wave increased by 2.6% with increasing fracture scale. The results indicated that an increase of fracture scale would reduce the degree of anisotropy of the shear wave. The amplitudes of slow shear waves propagating parallel and perpendicular to fractures decreased with increasing fracture scale.
