Corrigendum to“Toward stable and highly reversible zinc anodes for aqueous batteries via electrolyte engineering”[J.Energy Chem.83(2023)209–228]

It is regretful that the Acknowledgments part was lost in the final process of publication.The Acknowledgments part should be added as follow.The work described in this paper was supported by the grants from the Research Grants Council of the Hong Kong Special Administrative Region,China(Project No.16205721).

Regulating solid electrolyte interphases on phosphorus/carbon anodes via localized high-concentration electrolytes for potassium-ion batteries

The resourceful and inexpensive red phosphorus has emerged as a promising anode material of potassium-ion batteries(PIBs) for its large theoretical capacities and low redox potentials in the multielectron alloying/dealloying reactions,yet chronically suffering from the huge volume expansion/shrinkage with a sluggish reaction kinetics and an unsatisfactory interfacial stability against volatile electrolytes.Herein,we systematically developed a series of localized high-concentration electrolytes(LHCE) through diluting high-concentration ether electrolytes with a non-solvating fluorinated ether to regulate the formation/evolution of solid electrolyte interphases(SEI) on phosphorus/carbon(P/C) anodes for PIBs.Benefitting from the improved mechanical strength and structural stability of a robust/uniform SEI thin layer derived from a composition-optimized LHCE featured with a unique solvation structure and a superior K+migration capability,the P/C anode with noticeable pseudocapacitive behaviors could achieve a large reversible capacity of 760 mA h g^(-1)at 100 mA g^(-1),a remarkable capacity retention rate of 92.6% over 200 cycles at 800 mA g^(-1),and an exceptional rate capability of 334 mA h g^(-1)at8000 mA g^(-1).Critically,a suppressed reduction of ether solvents with a preferential decomposition of potassium salts in anion-derived interfacial reactions on P/C anode for LHCE could enable a rational construction of an outer organic-rich and inner inorganic-dominant SEI thin film with remarkable mechanical strength/flexibility to buffer huge volume variations and abundant K+diffusion channels to accelerate reaction kinetics.Additionally,the highly reversible/durable full PIBs coupling P/C anodes with annealed organic cathodes further verified an excellent practical applicability of LHCE.This encouraging work on electrolytes regulating SEI formation/evolution would advance the development of P/C anodes for high-performance PIBs.

Electrolyte Strategies Toward Optimizing Zn Anode for Zinc-Ion Batteries

Zinc-ion batteries(ZIBs)with low cost and high safety have become potential candidates for large-scale energy storage.However,the knotty Zn anode issues such as dendritic growth,hydrogen evolution reaction(HER)and corrosion and passivation are still unavoidable,which greatly limits the wide applications of ZIBs.The states and additives of electrolytes are closely related to these problems.However,there is a lack of systematic understanding and discussion about the intrinsic connection between the states and additives of electrolyte and Zn anode issues.In this review,the basic principles of dendritic growth,HER and corrosion and passivation are fi rstly introduced,and then,electrolyte optimization strategies with the corresponding electrochemical properties are systematically summarized.In particular,the action mechanism of electrolyte additives and the electrolyte states for Zn anode optimization is analyzed in detail.Finally,some unique views on the improvement of electrolyte for Zn anode optimization are put forward,which is expected to provide a certain professional reference for designing high-performance ZIBs.

Elucidating the suppression of lithium dendrite growth with a void-reduced anti-perovskite solid-state electrolyte pellet for stable lithium metal anodes

Solid-state lithium-metal batteries,with their high theoretical energy density and safety,are highly promising as a next-generation battery contender.Among the alternatives proposed as solid-state electrolyte,lithium-rich anti-perovskite(Li RAP)materials have drawn the most interest because of high theoretical Li^(+)conductivity,low cost and easy processing.Although solid-state electrolytes are believed to have the potential to physically inhibit the lithium dendrite growth,lithium-metal batteries still suffer from the lithium dendrite growth and thereafter the short circuiting.The voids in practical Li RAP pellets are considered as the root cause.Herein,we show that reducing the voids can effectively suppress the lithium dendrite growth.The voids in the pellet resulted in an irregular Li^(+)flux distribution and a poor interfacial contact with lithium metal anode;and hence the ununiform lithium dendrites.Consequently,the lithium-metal symmetric cell with void-reduced Li_(2)OHCl-HT pellet was able to display excellent cycling performance(750 h at 0.4 m A cm^(-2))and stability at high current density(0.8 m A cm^(-2)for 120 h).This study provides not only experimental evidence for the impact of the voids in Li RAP pellets on the lithium dendrite growth,but also a rational pellet fabrication approach to suppress the lithium dendrite growth.

Unraveling the heterogeneity of solid electrolyte interphase kinetically affecting lithium electrodeposition on lithium metal anode

The stability and uniformity of solid electrolyte interphase(SEI)are critical for clarifying the origin of capacity fade and safety issues for lithium metal anodes(LMA).However,understanding the interplay of SEI heterogeneity and Li electrodeposition is limited by the coupling of complex electrochemistry and mechanics processes.Herein,the correlation between the SEI failure behavior and Li deposition morphology is investigated through a quantitative electrochemical-mechanical model.The local deformation and stress of SEI during Li electrodeposition identify that the heterogeneous interface between different components first fails.Compared with the well-known mechanical strength,component uniformity plays the most important role in the initial SEI failure and uneven Li deposition,and a relative component uniformity(p>0.01)represents a proper balance to ensure the stability of the naturally heterogeneous SEI.Furthermore,the component regulation of SEI via the designed electrolyte experimentally demonstrates that improving component uniformity benefits SEI stability and the uniform Li electrodeposition for LMA,thereby increasing the capacity by~20%after 300 cycles.These fundamental understandings and proposed strategy can be not only used to guide the SEI optimization via the electrolyte regulation,but also extended to the rational designs of artificial SEI for high-performance LMA.

Polyanionic hydrogel electrolyte enables reversible and durable Zn anode for efficient Zn-based energy storage

Aqueous Zn-ion energy storage systems,which are expected to be integrated into intelligent electronics as a secure power supply,suffer poor reversibility of Zn anodes,predominantly associated with dendritic growth and side reactions.This study introduces a polyanionic strategy to address these formidable issues by developing a hydrogel electrolyte(PACXHE)with carboxyl groups.Notably,the carboxyl groups within the hydrogel structure establish favorable channels to promote the transport of Zn^(2+)ions.They also expedite the desolvation of hydrated Zn^(2+)ions,leading to enhanced deposition kinetics.Additionally,these functional groups confine interfacial planar diffusion and promote preferential deposition along the(002)plane of Zn,enabling a smooth surface texture of the Zn anode.This multifaceted regulation successfully achieves the suppression of Zn dendrites and side reactions,thereby enhancing the electrochemical reversibility and service life during plating/stripping cycles.Therefore,such an electrolyte demonstrates a high average Coulombic efficiency of 97.7%for 500 cycles in the Zn‖Cu cell and exceptional cyclability with a duration of 480 h at 1 mA cm^(-2)/1 mA h cm^(-2)in the Zn‖Zn cell.Beyond that,the Zn-ion hybrid micro-capacitor employing PACXHE exhibits satisfactory cycling stability,energy density,and practicality for energy storage in flexible,intelligent electronics.The present polyanionic-based hydrogel strategy and the development of PACXHE represent significant advancements in the design of hydrogel electrolytes,paving the way for a more sustainable and efficient future in the energy storage field.

Toward stable and highly reversible zinc anodes for aqueous batteries via electrolyte engineering

Featuring low cost, high abundance, low electrochemical potential, and large specific capacity, zinc(Zn)metal holds great potential as an anode material for next-generation rechargeable aqueous batteries.However, the poor reversibility resulting from dendrite formation and side reactions poses a major obstacle for its practical application. Electrolyte, which is regarded as the “blood” of batteries, has a direct impact on reaction kinetics, mass transport, and side reactions and thus plays a key role in determining the electrochemical performance of Zn electrodes. Therefore, considerable efforts have been devoted to modulating the electrolytes to improve the performance of Zn electrodes. Although significant progress has been made, achieving stable and highly reversible Zn electrodes remains a critical challenge. This review aims to provide a systematic summary and discussion on electrolyte strategies for highperformance aqueous Zn batteries. The(electro)-chemical behavior and fundamental challenges of Zn electrodes in aqueous electrolytes are first discussed. Electrolyte modulation strategies developed to address these issues are then classified and elaborated according to the underlying mechanisms.Finally, remaining challenges and promising future research directions on aqueous electrolyte engineering are highlighted. This review offers insights into the design of highly efficient electrolytes for new generation of rechargeable Zn batteries.

Stabilizing electrode-electrolyte interface for high-performance SiO_(x) anode by dual electrolyte additive

Macro-and micro-interface instability of SiO_(x)anode caused by its dramatic volume variation during cycling will result in low Coulombic efficiency and rapid capacity degradation.In this work,an organic-inorganic composite interfacial layer rich in benzene ring groups,polyisocyanates,and LiF was obtained on SiO_(x)anode by the introduction of 4-fluorophenyl isocyanate(FPI)and fluoroethylene carbonate(FEC)co-additives in electrolyte.The SiO_(x)anode material shows a capacity retention of 69.2%after 100 cycles at a current density of 1 A g^(-1)and rate capacity of 523 m A h g^(-1)at the current density of 3A g^(-1),while the SiO_(x)anode cycling in reference electrolyte has almost no capacity.

Fast and Stable Zinc Anode‑Based Electrochromic Displays Enabled by Bimetallically Doped Vanadate and Aqueous Zn^(2+)/Na^(+)Hybrid Electrolytes

Vanadates are a class of the most promising electrochromic materials for displays as their multicolor characteristics.However,the slow switching times and vanadate dissolution issues of recently reported vanadates significantly hinder their diverse practical applications.Herein,novel strategies are developed to design electrochemically stable vanadates having rapid switching times.We show that the interlayer spacing is greatly broadened by introducing sodium and lanthanum ions into V_(3)O_(8)interlayers,which facilitates the transportation of cations and enhances the electrochemical kinetics.In addition,a hybrid Zn^(2+)/Na^(+)electrolyte is designed to inhibit vanadate dissolution while significantly accelerating electrochemical kinetics.As a result,our electrochromic displays yield the most rapid switching times in comparison with any reported Zn-vanadate electrochromic displays.It is envisioned that stable vanadate-based electrochromic displays having video speed switching are appearing on the near horizon.

Concentrated ternary ether electrolyte allows for stable cycling of a lithium metal battery with commercial mass loading high-nickel NMC and thin anodes

A new concentrated ternary salt ether-based electrolyte enables stable cycling of lithium metal battery(LMB)cells with high-mass-loading(13.8 mg cm^(−2),2.5 mAh cm^(−2))NMC622(LiNi_(0.6)Co_(0.2)Mn_(0.2)O_(2))cathodes and 50μm Li anodes.Termed“CETHER-3,”this electrolyte is based on LiTFSI,LiDFOB,and LiBF4 with 5 vol%fluorinated ethylene carbonate in 1,2-dimethoxyethane.Commer-cial carbonate and state-of-the-art binary salt ether electrolytes were also tested as baselines.With CETHER-3,the electrochemical performance of the full-cell battery is among the most favorably reported in terms of high-voltage cycling stability.For example,LiNi_(x)Mn_(y)Co_(1-x-y)O_(2)(NMC)-Li metal cells retain 80%capacity at 430 cycles with a 4.4 V cut-off and 83%capacity at 100 cycles with a 4.5 V cut-off(charge at C/5,discharge at C/2).According to simulation by density functional theory and molecular dynamics,this favorable performance is an outcome of enhanced coordination between Li^(+)and the solvent/salt molecules.Combining advanced microscopy(high-resolution transmission electron microscopy,scanning electron microscopy)and surface science(X-ray photoelectron spectroscopy,time-of-fight secondary ion mass spectroscopy,Fourier-transform infrared spectroscopy,Raman spectroscopy),it is demonstrated that a thinner and more stable cathode electrolyte interphase(CEI)and solid electrolyte interphase(SEI)are formed.The CEI is rich in lithium sulfide(Li_(2)SO_(3)),while the SEI is rich in Li_(3)N and LiF.During cycling,the CEI/SEI suppresses both the deleterious transformation of the cathode R-3m layered near-surface structure into disordered rock salt and the growth of lithium metal dendrites.

Structural regulation chemistry of lithium-ion solvation in nonflammable phosphate-based electrolytes for high interfacial compatibility with graphite anode

With the booming development of lithium-ion batteries,safety has become one of the most primary focuses of current researches.Although there are various approaches to enhance the safety of lithiumion batteries,phosphate-based electrolyte holds the greatest potential for practical application due to their non-flammability.Nonetheless,its compatibility issue with the graphite anode remains a significant obstacle to its widespread use.Herein,an effective method is proposed to improve the compatibility of electrolyte with graphite(Gr)anode by rationally adjusting the proportion of lithium salt and solvent components to optimize the Li^(+)solvation structure.By slightly increasing the Li^(+)/triethyl phosphate(TEP)ratio,TEP alone cannot fully occupy the inner solvation sheath and therefore less polar ethylene carbonate(EC)has to be recruited,and the solvation structure gradually changes from Li^(+)–[TEP]_(4)to Li^(+)–[TEP]_(3)[EC]with the coexistence of EC and TEP.Simultaneously,EC molecules in the Li^(+)–[TEP]_(3)[EC]could be preferentially reduced on graphite compared to the TEP molecules,resulting in the formation of a uniform and durable solid-electrolyte interphase(SEI)layer.Benefiting from the optimized phosphate-based electrolyte,the Gr|Li battery exhibits a capacity retention rate of 96.8%after stable cycling at 0.5 C for 470 cycles which shows a longer cycle life than the battery with carbonate electrolyte(cycling at 0.5 C for 450 cycles).Therefore,this work provides the guidance for designing a non-flammable phosphate-based electrolyte for high-safety and long cycling-life lithium-ion batteries.

Innovative discontinuous-SEI constructed in ether-based electrolyte to maximize the capacity of hard carbon anode

Compared with graphite,the lower sodiation potential and larger discharge capacity of hard carbon(HC)makes it the most promising anode material for sodium-ion battery.Utilizing ether-based electrolyte rather than conventional carbonate-based electrolyte,HC achieves superior electrochemical performance.Nevertheless,the mechanism by which ether-based electrolyte improves the properties of HC is still controversial,primarily focusing on whether it forms solid electrolyte interphase(SEI)film.In this work,according to the sodium storage mechanisms in HC at low voltage(<0.1 V),including Na^(+)-diglyme co-interaction into the carbon layer(SEI forbidden)and desolvated Na^(+)insertion in the irregular carbon holes(SEI required),the NaPF6concentration in ether-based electrolyte was regulated,so as to construct a discontinuous-SEI on the surface of the HC anode,which significantly enhances the electrochemical performances of HC.Specifically,with 0.2 M NaPF6ether-based electrolyte,HC deliverers a discharge capacity of 459.7 mA h g^(-1)at 0.1 C and stays at 357.2 mA h g^(-1)after 500 cycles at 1 C,which is substantially higher than that of higher/lower salt concentration electrolytes.

Ultrathin and Air-Stable Lithium Metal Anodes with Superlong Cycling Life in Ether/Ester-Based Electrolytes

Ultrathin and air-stable Li metal anodes hold great promise toward high-energy and high-safety Li metal batteries(LMBs).However,the application of LMBs is technically impeded by existing Li metal anodes with large thickness,high reactivity,and poor performance.Here,we developed a novel and scalable approach for the construction of a 10-μm-thick flexible and air-stable Li metal anode by conformally encapsulating Li within a multifunctional VN film.Specifically,the highly lithiophilic VN layer guides a uniform deposition of Li,while abundant and multilevel pores arising from assembly of ultrathin nanosheets enable a spatially confined immersion of metallic Li,thus ensuring an ultrathin and sandwiched Li anode.More impressively,the strong hydrophobicity of VN surface can effectively improve the stability of anode to humid air,whereas the highly conductive framework greatly boosts charge transfer dynamics and enhances Li utilization and high-rate capability.Benefiting from such fascinating features,the constructed Li-VN anode exhibits ultrastable cycling stability in both ether(2500 h)and carbonate(900 h)electrolytes,respectively.Moreover,even exposed to ambient air for 12 h,the anode still can retain~78%capacity,demonstrating excellent air-defendable capability.This work affords a promising strategy for fabricating high-performance,high-safety,and low-cost LMBs.

Stable sodium anodes for sodium metal batteries(SMBs) enabled by in-situ formed quasi solid-state polymer electrolyte

A high-performance quasi-solid polymer electrolyte for sodium metal batteries(SMBs)based on in-situ polymerized poly(1,3-dioxolane)(DOL)with 20%volume ratio of fluoroethylene carbonate(FEC),termed"PDFE-20",is proposed in this work.It is demonstrated PDFE-20 possesses a room-temperature ionic conductivity of 3.31×10^(-3) S cm^(-1),an ionic diffusion activation energy of 0.10 eV,and an oxidation potential of 4.4 V.SMBs based on PDFE-20 and Na_(3)V_(2)(PO_(4))_(3)(NVP)cathodes were evaluated with an active material mass loading of 6.8 mg cm^(-2).The cell displayed an initial discharge specific capacity of 104 mA h g^(-1),and97.1%capacity retention after 100 cycles at 0.5 C.In-situ polymerization conformally coats the anode/-cathode interfaces,avoiding geometrical gaps and high charge transfer resistance with ex-situ polymerization of the same chemistry.FEC acts as a plasticizer during polymerization to suppress crystallization and significantly improves ionic transport.During battery cycling FEC promotes mechanical congruence of electrolyte-electrode interfaces while forming a stable NaF-rich solid electrolyte interphase(SEI)at the anode.Density functional theory(DFT)calculations were also performed to further understand the role FEC in the poly(DOL)-FEC electrolytes.This work broadens the application of in-situ prepared poly(DOL)electrolytes to sodium storage and demonstrates the crucial role of FEC in improving the electrochemical performance.

Trend of Developing Aqueous Liquid and Gel Electrolytes for Sustainable,Safe,and High‑Performance Li‑Ion Batteries

Current lithium-ion batteries(LIBs)rely on organic liquid electrolytes that pose significant risks due to their flammability and toxicity.The potential for environmental pollution and explosions resulting from battery damage or fracture is a critical concern.Water-based(aqueous)electrolytes have been receiving attention as an alternative to organic electrolytes.However,a narrow electrochemicalstability window,water decomposition,and the consequent low battery operating voltage and energy density hinder the practical use of aqueous electrolytes.Therefore,developing novel aqueous electrolytes for sustainable,safe,high-performance LIBs remains challenging.This Review first commences by summarizing the roles and requirements of electrolytes–separators and then delineates the progression of aqueous electrolytes for LIBs,encompassing aqueous liquid and gel electrolyte development trends along with detailed principles of the electrolytes.These aqueous electrolytes are progressed based on strategies using superconcentrated salts,concentrated diluents,polymer additives,polymer networks,and artificial passivation layers,which are used for suppressing water decomposition and widening the electrochemical stability window of water of the electrolytes.In addition,this Review discusses potential strategies for the implementation of aqueous Li-metal batteries with improved electrolyte–electrode interfaces.A comprehensive understanding of each strategy in the aqueous system will assist in the design of an aqueous electrolyte and the development of sustainable and safe high-performance batteries.

An efficient recycling strategy to eliminate the residual“impurities”while heal the damaged structure of spent graphite anodes

The recycling of graphite from spent lithium-ion batteries(LIBs)is overlooked due to its relatively low added value and the lack of efficient recovering methods.To reuse the spent graphite anodes,we need to eliminate their useless components(mainly the degraded solid electrolyte interphase,SEI)and reconstruct their damaged structure.Herein,a facile and efficient strategy is proposed to recycle the spent graphite on the basis of the careful investigation of the composition of the cycled graphite anodes and the rational design of the regeneration processes.The regenerated graphite,which is revitalized by calcination treatment and acid leaching,delivers superb rate performance and a high specific capacity of 370 mAh g^(-1)(~99% of its theoretical capacity)after 100 cycles at 0.1 C,superior to the commercial graphite anodes.The improved electrochemical performance could be attributed to unchoked Li^(+) transport channels and enhanced charge transfer reaction due to the effective destruction of the degraded SEI and the full recovery of the damaged structure of the spent graphite.This work clarifies that the electrochemical performance of the regenerated graphite could be deteriorated by even a trace amount of the residual“impurity”and provides a facile method for the efficient regeneration of graphite anodes.

An Electrochemical Perspective of Aqueous Zinc Metal Anode

Based on the attributes of nonflammability,environmental benignity,and cost-effectiveness of aqueous electrolytes,as well as the favorable compatibility of zinc metal with them,aqueous zinc ions batteries(AZIBs)become the leading energy storage candidate to meet the requirements of safety and low cost.Yet,aqueous electrolytes,acting as a double-edged sword,also play a negative role by directly or indirectly causing various parasitic reactions at the zinc anode side.These reactions include hydrogen evolution reaction,passivation,and dendrites,resulting in poor Coulombic efficiency and short lifespan of AZIBs.A comprehensive review of aqueous electrolytes chemistry,zinc chemistry,mechanism and chemistry of parasitic reactions,and their relationship is lacking.Moreover,the understanding of strategies for suppressing parasitic reactions from an electrochemical perspective is not profound enough.In this review,firstly,the chemistry of electrolytes,zinc anodes,and parasitic reactions and their relationship in AZIBs are deeply disclosed.Subsequently,the strategies for suppressing parasitic reactions from the perspective of enhancing the inherent thermodynamic stability of electrolytes and anodes,and lowering the dynamics of parasitic reactions at Zn/electrolyte interfaces are reviewed.Lastly,the perspectives on the future development direction of aqueous electrolytes,zinc anodes,and Zn/electrolyte interfaces are presented.

In-situ polymerized PEO-based solid electrolytes contribute better Li metal batteries:Challenges,strategies,and perspectives

Polyethylene oxide(PEO)-based solid polymer electrolytes(SPEs)with good electrochemical stability and excellent Li salt solubility are considered as one of the most promising SPEs for solid-state lithium metal batteries(SSLMBs).However,PEO-based SPEs suffer from low ionic conductivity at room temperature and high interfacial resistance with the electrodes due to poor interfacial contact,seriously hindering their practical applications.As an emerging technology,in-situ polymerization process has been widely used in PEO-based SPEs because it can effectively increase Li-ion transport at the interface and improve the interfacial contact between the electrolyte and electrodes.Herein,we review recent advances in design and fabrication of in-situ polymerized PEO-based SPEs to realize enhanced performance in LMBs.The merits and current challenges of various SPEs,as well as their stabilizing strategies are presented.Furthermore,various in-situ polymerization methods(such as free radical polymerization,cationic polymerization,anionic polymerization)for the preparation of PEO-based SPEs are summarized.In addition,the application of in-situ polymerization technology in PEO-based SPEs for adjustment of the functional units and addition of different functional filler materials was systematically discussed to explore the design concepts,methods and working mechanisms.Finally,the challenges and future prospects of in-situ polymerized PEO-based SPEs for SSLMBs are also proposed.

Revealing the specific role of sulfide and nano-alumina in composite solid-state electrolytes for performance-reinforced ether-nitrile copolymers

Composite solid-state electrolytes represent a critical pathway that balances the interface compatibility and lithium-ion conductivity in all-solid-state batteries.The quest for stable and highly ion-conductive combinations between polymers and fillers is vital,but blind attempts are often made due to a lack of understanding of the mechanisms involved in the interaction between polymers and fillers.Herein,we employ in-situ polymerization to prepare a polymer based on an ether-nitrile copolymer with high cathode stability as the foundation and discuss the performance enhancement mechanisms of argyrodite and nano-alumina.With 1%content of sulfide interacting with the polymer at the two-phase interface,the local enhancement of lithium-ion migration capability can be achieved,avoiding the reduction in capacity due to the low ion conductivity of the passivation layer during cycling.The capacity retention after 50cycles at 0.5 C increases from 83.5%to 94.4%.Nano-alumina,through anchoring the anions and interface inhibition functions,eventually poses an initial discharge capacity of 136.8 m A h g^(-1)at 0.5 C and extends the cycling time to 1000 h without short-circuiting in lithium metal batteries.Through the combined action of dual fillers on the composite solid-state electrolyte,promising insights are provided for future material design.

Rationally designing electrolyte additives for highly improving cyclability of LiNi_(0.5)Mn_(1.5)O_(4)/Graphite cells

High voltage is necessary for high energy lithium-ion batteries but difficult to achieve because of the highly deteriorated cyclability of the batteries.A novel strategy is developed to extend cyclability of a high voltage lithium-ion battery,LiNi_(0.5)Mn_(1.5)O_(4)/Graphite(LNMO/Graphite)cell,which emphasizes a rational design of an electrolyte additive that can effectively construct protective interphases on anode and cathode and highly eliminate the effect of hydrogen fluoride(HF).5-Trifluoromethylpyridine-trime thyl lithium borate(LTFMP-TMB),is synthesized,featuring with multi-functionalities.Its anion TFMPTMB-tends to be enriched on cathode and can be preferentially oxidized yielding TMB and radical TFMP-.Both TMB and radical TFMP can combine HF and thus eliminate the detrimental effect of HF on cathode,while the TMB dragged on cathode thus takes a preferential oxidation and constructs a protective cathode interphase.On the other hand,LTFMP-TMB is preferentially reduced on anode and constructs a protective anode interphase.Consequently,a small amount of LTFMP-TMB(0.2%)in 1.0 M LiPF6in EC/DEC/EMC(3/2/5,wt%)results in a highly improved cyclability of LNMO/Graphite cell,with the capacity retention enhanced from 52%to 80%after 150 cycles at 0.5 C between 3.5 and 4.8 V.The as-developed strategy provides a model of designing electrolyte additives for improving cyclability of high voltage batteries.