A Pr-doped TiO2-NTs/SnO2-Sb electrode was prepared by a simple method, cyclic voltarnmetry (CV). The methyl orange (MO)aqueous solution was selected as a simulated wastewater. The ordered microstructural TiO2-NTs ...A Pr-doped TiO2-NTs/SnO2-Sb electrode was prepared by a simple method, cyclic voltarnmetry (CV). The methyl orange (MO)aqueous solution was selected as a simulated wastewater. The ordered microstructural TiO2-NTs substrate was synthesized by an electrochemical method to obtain large specific surface area and high space utilization. The phase structure, electrode surface morphology and electrochemical properties of electrodes were characterized by XRD, SEM and electrochemical technology, respectively. The results showed that praseo- dymium oxide was successfully doped into the SnOz-Sb film by CV method. Due to the doped Pr, the oxygen evo- lution potential increased from 2.25 V to 2.40 V. The degradation of MO was investigated by UV-vis. The Ct/C0(φ) was studied as a function to obtain the optimal parameters, such as the amount of doped Pr, current density and initial dye concentration. In addition, the degradation process followed pseudo-first-order reaction kinetics and the rate constant was 0.099 3 min-1. The result indicated that the introduction of Pr reduced the formation of oxygen vacancies or enhanced the formation of adsorbed hydroxyl radical groups on the surface, thus leading to better activity and stability.展开更多
Introduction Sensitive linear sweep voltammetry to have been applied to the catalytic kinetic analysis may be helpful for the application of some organic reagents to the analysis of inorganic ones by voltammetry, The ...Introduction Sensitive linear sweep voltammetry to have been applied to the catalytic kinetic analysis may be helpful for the application of some organic reagents to the analysis of inorganic ones by voltammetry, The catalytic reaction-linear sweep voltammetric method for the determination of noble metals, such as Ag, Os, Ru and Ir has been developed, but no report about the method for the determination of rhodium has been published so far.展开更多
An electroanalytical method was developed for the direct quantitative determination of paracetamol in tablets based on its oxidation behavior. The electrochemical oxidation and determination of paracetamol were easily...An electroanalytical method was developed for the direct quantitative determination of paracetamol in tablets based on its oxidation behavior. The electrochemical oxidation and determination of paracetamol were easily carried out on born-doped diamond (BDD) electrode using two voltammetric techniques (CV and DPV). The electrochemical measurements performed by cyclic voltammetric (CV) and differential pulse voltammetry (DPV) techniques were carried out using a cathodically pretreated boron-doped diamond electrode in HClO4 and KClO4 electrolytes. HClO4 was then selected for analytical purposes and scan rate studies were also completed. The oxidation of the paracetamol is found to be irreversible and a diffusion-controlled nature of the paracetamol oxidation peak was established. A linear calibration curve for DPV analysis was constructed in the paracetamol concentration range from 0 μM to 13.87 μM, with 0.16 μM and 0.55 μM as the detection and quantification limit respectively.展开更多
基金Supported by the National Natural Science Foundation of China(No.20706041)the Natural Science Foundation of Tianjin(No.09JCYBJC06500)
文摘A Pr-doped TiO2-NTs/SnO2-Sb electrode was prepared by a simple method, cyclic voltarnmetry (CV). The methyl orange (MO)aqueous solution was selected as a simulated wastewater. The ordered microstructural TiO2-NTs substrate was synthesized by an electrochemical method to obtain large specific surface area and high space utilization. The phase structure, electrode surface morphology and electrochemical properties of electrodes were characterized by XRD, SEM and electrochemical technology, respectively. The results showed that praseo- dymium oxide was successfully doped into the SnOz-Sb film by CV method. Due to the doped Pr, the oxygen evo- lution potential increased from 2.25 V to 2.40 V. The degradation of MO was investigated by UV-vis. The Ct/C0(φ) was studied as a function to obtain the optimal parameters, such as the amount of doped Pr, current density and initial dye concentration. In addition, the degradation process followed pseudo-first-order reaction kinetics and the rate constant was 0.099 3 min-1. The result indicated that the introduction of Pr reduced the formation of oxygen vacancies or enhanced the formation of adsorbed hydroxyl radical groups on the surface, thus leading to better activity and stability.
基金Supported by the National Natural Science Foundation of China
文摘Introduction Sensitive linear sweep voltammetry to have been applied to the catalytic kinetic analysis may be helpful for the application of some organic reagents to the analysis of inorganic ones by voltammetry, The catalytic reaction-linear sweep voltammetric method for the determination of noble metals, such as Ag, Os, Ru and Ir has been developed, but no report about the method for the determination of rhodium has been published so far.
文摘An electroanalytical method was developed for the direct quantitative determination of paracetamol in tablets based on its oxidation behavior. The electrochemical oxidation and determination of paracetamol were easily carried out on born-doped diamond (BDD) electrode using two voltammetric techniques (CV and DPV). The electrochemical measurements performed by cyclic voltammetric (CV) and differential pulse voltammetry (DPV) techniques were carried out using a cathodically pretreated boron-doped diamond electrode in HClO4 and KClO4 electrolytes. HClO4 was then selected for analytical purposes and scan rate studies were also completed. The oxidation of the paracetamol is found to be irreversible and a diffusion-controlled nature of the paracetamol oxidation peak was established. A linear calibration curve for DPV analysis was constructed in the paracetamol concentration range from 0 μM to 13.87 μM, with 0.16 μM and 0.55 μM as the detection and quantification limit respectively.