In this study, the properties of hip implant material and lubricants were examined using a pin on disc apparatus, to compare the effect of metal-on-metal （MoM） contact with a bio-lubricant derived from palm oil. The...In this study, the properties of hip implant material and lubricants were examined using a pin on disc apparatus, to compare the effect of metal-on-metal （MoM） contact with a bio-lubricant derived from palm oil. The behaviour of the lubricants was observed during the experiments, in which a hemispherical pin was loaded against a rotating disc with a groove. A titanium alloy was used to modify the hemispherical pin and disc. Before and after the experiments, the weight and surface roughness were analysed, to detect any degradation. The results were compared according to the different kinematic viscosities. The wear rates and level of friction with each lubricant were also examined. The lubricant with the highest vis- cosity had the lowest frictional value. Therefore, develop- ing suitable lubricants has the potential to prolong the lifespan of prostheses or implants used in biomedical applications. The experiments collectively show that lubricants derived from palm oil could be used as efficient bio-lubricants in the future.展开更多
The surface modified TiO_2 nanoparticles were prepared by using 12-hydroxystearic acid chemically modified on the TiO_2 surface. The average size of the TiO_2 particles is about 30 nm. The optimum ratio of tetrabutyl ...The surface modified TiO_2 nanoparticles were prepared by using 12-hydroxystearic acid chemically modified on the TiO_2 surface. The average size of the TiO_2 particles is about 30 nm. The optimum ratio of tetrabutyl titanate to 12-hydroxystearic acid was 1/0.5. The bonding form between 12-hydroxystearic acid and TiO_2 nucleus was investigated by FTIR, DSC, TGA and XRD techniques. The lubricating grease containing the surface modified TiO_2 nanoparticles possesses excellent anti-wear and anti-friction properties. Compared with the grease without TiO_2, the PB value can be increased by 52% as the best performance of the grease containing surface modified TiO_2 nanoparticles, while the friction coefficient can be reduced by 33% with the addition of a small amount of TiO_2 nanoparticles, and meanwhile the wear scar diameter decreases by 25%.展开更多
This paper has insepected the size and the structure of the calcium carbonate (CaCO3) particles by adopting X-ray diffraction and transmission electron microscope (TEM). The suitable surfactants have been selected and...This paper has insepected the size and the structure of the calcium carbonate (CaCO3) particles by adopting X-ray diffraction and transmission electron microscope (TEM). The suitable surfactants have been selected and put into lubricating oil with nanometer CaCO3 particles. By testing some parameters, such as the maximum non-seizure load, the shape and diameter of wear scar, the friction factor, the nanometer CaCO3 particles’ properties of extreme pressure, anti-wear and friction reduction have been tested and analyzed. The properties of the nanometer CaCO3 particles’ tribology chemistry have been analyzed through X-ray photoelectron spectrum (XPS) test. Also the nanometer CaCO3 particles’ mechanism of anti-wear and friction reduction has been studied systematically. The research results show that, the lubricating oil with nanometer CaCO3 particles have good tribological properties.展开更多
Friction spun core yarn has two components: filament core and staple fiber sheath. Under axial rubbing action, the failure mode of the core yarn is the stripping of the sheath from the core. This paper introduces a me...Friction spun core yarn has two components: filament core and staple fiber sheath. Under axial rubbing action, the failure mode of the core yarn is the stripping of the sheath from the core. This paper introduces a method to test the anti - stripping property of the core yarn. With a modified Universal Testing Machine, the stripping resistance of friction spun core yarn can be continuously measured. Some factors Influencing the measurements are discussed in detail. The testing results are compared with those from a Y731 Yarn Abrasion Tester and fur - ther confirmed by weaving practice.展开更多
Five kinds of 45# steel samples with concave features on the surface were manufactured using Laser Texturing Technology (LTT). Optimum design theory was used to design the experiment, and a two-level orthogonal table-...Five kinds of 45# steel samples with concave features on the surface were manufactured using Laser Texturing Technology (LTT). Optimum design theory was used to design the experiment, and a two-level orthogonal table-L 16 (2 15 ) design was adopted . Micro-wear and micro-friction experienced by samples with concave surface features and samples with smooth surfaces were compared experimentally. The wear resistance of samples with concave surface features was increased most, and different surface morphologies had different effects on friction and wear properties.展开更多
基金support by the Research University Grant(RUG)from Universiti Teknologi Malaysia(Grant No.03H58)Fundamental Research Grant Scheme(FRGS)from Ministry of Higher Education(MOHE)Malaysia+2 种基金E-Science Fund Grant and Exploratory Research Grant Scheme(ERGS)from Ministry of Sciencethe awards of the UTM-RMC Postdoctoral Fellowship(Norzahir Sapawe)the Faculty of Mechanical Engineering Universiti Teknologi Malaysia
文摘In this study, the properties of hip implant material and lubricants were examined using a pin on disc apparatus, to compare the effect of metal-on-metal （MoM） contact with a bio-lubricant derived from palm oil. The behaviour of the lubricants was observed during the experiments, in which a hemispherical pin was loaded against a rotating disc with a groove. A titanium alloy was used to modify the hemispherical pin and disc. Before and after the experiments, the weight and surface roughness were analysed, to detect any degradation. The results were compared according to the different kinematic viscosities. The wear rates and level of friction with each lubricant were also examined. The lubricant with the highest vis- cosity had the lowest frictional value. Therefore, develop- ing suitable lubricants has the potential to prolong the lifespan of prostheses or implants used in biomedical applications. The experiments collectively show that lubricants derived from palm oil could be used as efficient bio-lubricants in the future.
文摘The surface modified TiO_2 nanoparticles were prepared by using 12-hydroxystearic acid chemically modified on the TiO_2 surface. The average size of the TiO_2 particles is about 30 nm. The optimum ratio of tetrabutyl titanate to 12-hydroxystearic acid was 1/0.5. The bonding form between 12-hydroxystearic acid and TiO_2 nucleus was investigated by FTIR, DSC, TGA and XRD techniques. The lubricating grease containing the surface modified TiO_2 nanoparticles possesses excellent anti-wear and anti-friction properties. Compared with the grease without TiO_2, the PB value can be increased by 52% as the best performance of the grease containing surface modified TiO_2 nanoparticles, while the friction coefficient can be reduced by 33% with the addition of a small amount of TiO_2 nanoparticles, and meanwhile the wear scar diameter decreases by 25%.
基金support from the Shanghai Education Commission and Shanghai Nanotechnology Promotion Center for this research
文摘This paper has insepected the size and the structure of the calcium carbonate (CaCO3) particles by adopting X-ray diffraction and transmission electron microscope (TEM). The suitable surfactants have been selected and put into lubricating oil with nanometer CaCO3 particles. By testing some parameters, such as the maximum non-seizure load, the shape and diameter of wear scar, the friction factor, the nanometer CaCO3 particles’ properties of extreme pressure, anti-wear and friction reduction have been tested and analyzed. The properties of the nanometer CaCO3 particles’ tribology chemistry have been analyzed through X-ray photoelectron spectrum (XPS) test. Also the nanometer CaCO3 particles’ mechanism of anti-wear and friction reduction has been studied systematically. The research results show that, the lubricating oil with nanometer CaCO3 particles have good tribological properties.
文摘Friction spun core yarn has two components: filament core and staple fiber sheath. Under axial rubbing action, the failure mode of the core yarn is the stripping of the sheath from the core. This paper introduces a method to test the anti - stripping property of the core yarn. With a modified Universal Testing Machine, the stripping resistance of friction spun core yarn can be continuously measured. Some factors Influencing the measurements are discussed in detail. The testing results are compared with those from a Y731 Yarn Abrasion Tester and fur - ther confirmed by weaving practice.
基金The authors are grateful for the financial support provided by the National High Technology Research and Development Program of China(863 Program)(No.2002AA331180)Trans-Century Training Program Foundation for the Talents by the Chinese Ministry of Education(No.20030720)+1 种基金the Foundation for Distin-guished Young Scholars of Jilin Province(Grant No.20040104)the Natural Science Foundation of Jilin Province(No.2002628-2).
文摘Five kinds of 45# steel samples with concave features on the surface were manufactured using Laser Texturing Technology (LTT). Optimum design theory was used to design the experiment, and a two-level orthogonal table-L 16 (2 15 ) design was adopted . Micro-wear and micro-friction experienced by samples with concave surface features and samples with smooth surfaces were compared experimentally. The wear resistance of samples with concave surface features was increased most, and different surface morphologies had different effects on friction and wear properties.
