A theoretical study is presented herein on the pen- etration of a semi-infinite target by a spherical-headed long rod for Yp 〉 S, where Yp is the penetrator strength and S is the static target resistance. For Yp 〉 S...A theoretical study is presented herein on the pen- etration of a semi-infinite target by a spherical-headed long rod for Yp 〉 S, where Yp is the penetrator strength and S is the static target resistance. For Yp 〉 S, depending upon initial impact velocity, there exist three types of penetration, namely, penetration by a rigid long rod, penetration by a deforming non-erosive long rod and penetration by an erosive long rod. If the impact velocity of the penetrator is higher than the hydrodynamic velocity （VH）, it will penetrate the target in an erosive mode; if the impact velocity lies between the hydrodynamic velocity （VH） and the rigid body velocity （VR）, it will penetrate the target in a deformable mode; if the impact velocity is less than the rigid body velocity （VR）, it will penetrate the target in a rigid mode. The critical conditions for the transition among these three penetration modes are proposed. It is demonstrated that the present model predictions correlate well with the experimental observations in terms of depth of penetration （DOP） and the critical transition conditions.展开更多
Effects of TiO2 or ZrO2 addition on corrosion resist; ance of periclase -spinel refractories to copper matte at different temperatures were investigated using static crucible method, and the results were compared with...Effects of TiO2 or ZrO2 addition on corrosion resist; ance of periclase -spinel refractories to copper matte at different temperatures were investigated using static crucible method, and the results were compared with those of fused rebonded magnesite -chrome bricks. The chartges in chemical compositions and microstructure in different zones of the specimens after corrosion tests were studied by means of EDAX and SEM. The results show that ： （ 1 ） the reaction between periclase - spinel refractories and copper matte is very weak with the reaction layer thinner than 1 mm. Penetration is the main cause of copper matte corrosion and the penetration depth increases with temperature rising. When temperature exceeds 1200 ℃ , the penetration depth increases significantly; （2） appropriate TiO2 addition can improve penetration resistance （even better than that of magnesia chrome brick）, the optimum addition is 2 %. But ZrO2 has no remarkable effect on penetration resistance to copper matte of periclase - spinel refractories ; （ 3 ） SEM and EDAX analysis indicates that, Cu2S penetrates much further into the specimens than FeS.展开更多
基金supported by the National Natural Science Foundation of China (10872195)
文摘A theoretical study is presented herein on the pen- etration of a semi-infinite target by a spherical-headed long rod for Yp 〉 S, where Yp is the penetrator strength and S is the static target resistance. For Yp 〉 S, depending upon initial impact velocity, there exist three types of penetration, namely, penetration by a rigid long rod, penetration by a deforming non-erosive long rod and penetration by an erosive long rod. If the impact velocity of the penetrator is higher than the hydrodynamic velocity （VH）, it will penetrate the target in an erosive mode; if the impact velocity lies between the hydrodynamic velocity （VH） and the rigid body velocity （VR）, it will penetrate the target in a deformable mode; if the impact velocity is less than the rigid body velocity （VR）, it will penetrate the target in a rigid mode. The critical conditions for the transition among these three penetration modes are proposed. It is demonstrated that the present model predictions correlate well with the experimental observations in terms of depth of penetration （DOP） and the critical transition conditions.
文摘Effects of TiO2 or ZrO2 addition on corrosion resist; ance of periclase -spinel refractories to copper matte at different temperatures were investigated using static crucible method, and the results were compared with those of fused rebonded magnesite -chrome bricks. The chartges in chemical compositions and microstructure in different zones of the specimens after corrosion tests were studied by means of EDAX and SEM. The results show that ： （ 1 ） the reaction between periclase - spinel refractories and copper matte is very weak with the reaction layer thinner than 1 mm. Penetration is the main cause of copper matte corrosion and the penetration depth increases with temperature rising. When temperature exceeds 1200 ℃ , the penetration depth increases significantly; （2） appropriate TiO2 addition can improve penetration resistance （even better than that of magnesia chrome brick）, the optimum addition is 2 %. But ZrO2 has no remarkable effect on penetration resistance to copper matte of periclase - spinel refractories ; （ 3 ） SEM and EDAX analysis indicates that, Cu2S penetrates much further into the specimens than FeS.
