Preparation of Durable Antibacterial Polyester Fabrics by Grafting with the Natural Quaternary Ammonium Compound Betaine

Recently, the textile industry has increasingly advocated for natural resource-based healthcare textiles. This research presents a facile and eco-friendly approach to developing durable antibacterial polyester fabrics. Polyester fabric was first subjected to an alkaline hydrolysis to impart hydroxyl groups on the fiber surface. A natural antibacterial agent, betaine, was then covalently bonded to the hydrolyzed polyester fiber surface through esterification. XPS, Raman, SEM, and Wicking measurements were carried out to verify the esterification reaction. Antibacterial tests confirmed that betaine treatment grafted polyester fabrics revealed a remarkable antibacterial effect with inhibition rates > 99.9% against both E. coli and S. aureus and still remained inhibition rates of up to 91.5% against both bacteria after home washing for 20 cycles. Moreover, the modification significantly increased the capillary effect of polyester fabric but did not cause apparent adverse effects on the fabric’s hand or tensile strength. Overall, this grafting strategy for durable, antibacterial polyester fabric represents a significant practicality in the textile industry.

Atmospheric-pressure Air Plasma Treatment of Polyester Fabrics for Inkjet Printing with Pigment Inks

Without any preprocessing,polyester fabric has lower ability to hold on water and inks due to the smooth morphology of polyester fibers. Therefore, patterns directly printed with pigment inks have poor color yields and bleed easily. Pretreatments of polyester fabric were carried out with atmospheric air plasma under different experimental conditions. After plasma treatment the samples were printed with magenta pigment ink. Scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS) analyses indicated that the enhanced color performance was mainly contributed by not only the etching effect but also oxygen-containing polar groups induced onto fiber surfaces through plasma treatment. Thereby the surface modification of polyester fabrics using atmospheric-pressure air plasma offers a potential way to fabric pretreatment for pigment inkjet printing with the advantages of environmental friendly and energy saving over traditional pretreatment methods.

Influence of Polyester Resin Treatment on Jute Fabrics for Geotextile Applications

In this study, jute woven fabrics (1 × 1 plain, twill, zigzag and diamond weave) were manufactured from 100% raw jute yarn. The fabric specimens were treated by 5%, 10%, 15%, 20% and 25% unsaturated polyester resin where styrene monomer used as a solvent and 1% methyl ethyl ketone peroxide (MEKP) was used as initiator. Two bar pressure was applied for complete wetting of the fabric by a Padder and curing was done at 130?C for 10 minutes. The physico-mechanical characteristics of untreated and treated samples were examined and evaluated. It was revealed that moisture content (MC) and water absorbency of the treated specimens were decreased with the increase of resin percentage (%) in the fabrics. MC and water absorbency were maximum decreased up to 50.23% and 60.14% respectively by 25% resin treatment. On the other hand, bending length (BL), flexural rigidity (FR), flexural modulus (FM) and tensile strength (TS) were enhanced with the increase of resin percentage in the fabrics which resulted higher fabric stiffness. The maximum improvement of BL, FR, FM and TS were found to be 6.67%, 56.04%, 10.57% and 18.75% respectively in comparison to untreated sample. Soil degradation tests exhibited that 33.59% TS loss occurred for untreated specimens where only 8.04% loss of TS found for 25% resin treated one. Furthermore, jute based twill, zigzag and diamond fabrics were also treated by 10%, 15%, 20% and 25% resin, then measured their TS and compared with plain fabrics. It was revealed that plain fabrics have superior TS over other fabrics. It was also evident that TS enhanced for all the fabrics after resin treatment and maximum increase found for all the fabrics up to 25% resin treatment.

Recovery of Polyester/Cotton Blended Fabrics by Alkali Dissolution

A new type of alkali-soluble polyester/cotton blended yarns was used to knit a compact knitted fabric on a circular weft knitting machine,treated with 5 g/L NaOH solution for 60 min at a temperature of 100℃,and the polyester was completely dissolved.The dissolved polyester could be polymerized again by a polycondensation reaction.After the cotton fibers were opened and combed,the length and mechanical properties of the cotton fibers were tested.The physical and mechanical properties of the separated cotton fibers were good.The chemical structure and crystallinity were analyzed by Fourier transform infrared(FTIR)spectroscopy and X-ray diffraction(XRD)analysis.It could be seen that the chemical structure of cotton fibers was almost unchanged after treatment,and the crystallinity decreased slightly.It provides some reference for the separation and recycling of waste polyester/cotton fabrics.

TiO_2/Polyester Non-woven Fabrics as a Kind of Photocatalyst for the Degradation of Formaldehyde Gas

The feasibility of photocatalytic degradation of the formaldehyde gas by titanium dioxide （TiO2）/polyester non-woven fabrics was studied. Tbe effects of parameters such as tbe concentration of TiO2 solution, pH value, and drying temperature on the photocatalytic degradation of the formaldehyde gas were also studied. The results showed that the photodegradation efficiency of the formaldehyde gas increased rapidly with the increasing of the concentration of TiO2 solution up to 15g/L, but when the concentration was in excess of 15g/L, the photodegradation efficiency decreased gradually and fluctuated due to light obstruction and disperse state of TiO2. Adjusting the pH value in the solution, the efficiency of photocatalytic degradation of the formaldehyde gas could be improved. The mechanisms of the reaction and the role of the additives were also investigated. After 42hours, TiO2/ polyester non-woven fabric showed no significant loss of the photocatalytic activity.

Studying the Effect of Polyester Fiber Blend Ratio and Pilling Cycle on Blended Knit Fabrics

Pilling is a severe concern for blended fabrics. The aesthetic look and smoothness are the buyers’ prime requirements. The main focus of the study was to see the pilling behavior from various percentages of polyester fiber blend ratio as well as the different pilling cycles on blended fabrics. The cotton, polyester, and elastane prepared the study fabrics. These fabrics are (90% Cotton/5% Polyester/5% Elastane, 90% Cotton/6% Polyester/4% Elastane, 90% Cotton/7% Polyester/3% Elastane, 90% Cotton/8% Polyester/2% Elastane, and 90% Cotton/9% Polyester/1% Elastane, 85% Cotton/10% Polyester/5% Elastane, 85% Cotton/11% Polyester/4% Elastane, 85% Cotton/12% Polyester/3% Elastane, 85% Cotton/13% Polyester/2% Elastane, and 85% Cotton/ 14% Polyester/1% Elastane, 80% Cotton/15% Polyester/5% Elastane, 80% Cotton/16% Polyester/4% Elastane, 80% Cotton/17% Polyester/3% Elastane, 80% Cotton/18% Polyester/2% Elastane, and 80% Cotton/19% Polyester/1% Elastane). The selected polyester blend ratios were 5%, 6%, 7%, 8%, 9%, 10%, 11%, 12%, 13%, 14%, 15%, 16%, 17%, 18% and 19% respectively. The study used the Martindale pilling tester with 2000, 5000, and 7000 cycles, respectively. The evaluation followed the ISO 12945-2:2000. The study findings are that the polyester fiber blend ratio did not influence the pilling grade on blended fabrics for pilling cycles 2000, and the pilling grade remained constant at 4 - 5. The pilling grade started to deteriorate in pilling cycle 5000 for the fabrics 85%C/10%P/5%E, 85%C/11%P/4%E, 85%C/12%P/3%E, 85%C/ 13%P/2%E, 85%C/14%P/1%E showed the pilling grade 4, and the fabrics made from 80%C/15%P/5%E, 80%C/16%P/4%E, 80%C/17%P/3%E, 80%C/ 18%P/2%E, 80%C/19%P/1%E showed the pilling grade 4, 3, 3, 3, and 3 respectively. For the pilling cycles 7000, the pilling grade further deteriorated for the fabrics 80%C/15%P/5%E, 80%C/16%P/4%E, 80%C/17%P/3%E, 80%C/ 18%P/2%E, 80%C/19%P/1%E showed the pilling grade 3, 3, 2, 2, and 2 respectively. The study finds the dominance of polyester fiber throughout the experiment. The author hopes this study’s outcome will help new researchers, advanced researchers, and the textile industry’s sustainable development research and development team.

Predicting Bursting Strength Behavior of Weft Knitted Fabrics Using Various Percentages of Cotton, Polyester, and Spandex Fibers

The bursting strength is an essential quality parameter of knit fabric. The fabric structure, weight, types of fibers, and fiber blend proportion influence the bursting strength parameter. The tenacity of polyester fiber is better than cotton and spandex. The study focused on predicting knit fabric bursting strength test value using different fibers (cotton, polyester, and spandex) with varying percentages of the blend ratio. This study used fifteen categories of blended fabrics. The Pearson Correlation and the hypothetical ANOVA regression analysis were conducted to do the statistical significance test. The experimental result reveals that the bursting strength test result increased with the increased percentage of polyester and suggested a suitable regression equation. The dominance of the polyester fiber was observed throughout the experiment, i.e., the higher the polyester blend proportion, the higher the bursting strength value. The inclusion of polyester in blends can reduce the cost of fabric. The developed prediction model or equation can help the fabric manufacturer make appropriate decisions regarding getting the expected bursting strength. The researcher hopes that the findings from this study will motivate new researchers, advanced researchers, and the textile manufacturing industry.

Research on the Dyeing Properties of Silk-like Knitted Fabric of Ultra-fine Polyester Fiber

In this paper, dyeing processes of silk-like fabric of ultra-fine polyester fiber are studied through orthogonal experiment, dyeing properties (K/S value, L* value, and C* value) of the fabric are tested under different dyeing conditions (pH value, time, and bath ratlo), and optimum dyeing conditions are arrived at through analysis.

Development of Superhydrophobic Polyester (Polyethylene terephthalate) Fabric for Multiple Applications

This study intended to develop a healthy and environmentally friendly super-hydrophobic PET polyester textile fabric using a specific Fluoro Silane finish(SHF).A novel SHF was prepared and applied on a polyester fabric using a pad-dry-cure method.The finished fabric was evaluated for the degree of hydrophobicity,durability and stain repellence.The finished fabric exhibited static water contact angle greater than 170o and received 90 AATCC(4 ISO)rating that is recognized as super-hydrophobicity and this property was maintained even after a 50,000-cycle abrasion test.FTIR analysis identified the characteristic peaks related to Si-O-Si and C-F asymmetric stretching bands of the finish on the fabric indicating a robust attachment on the fabric.Finished fabric did not show any change in appearance or tactile characteristics of the fabric.

Mathematical Index for Evaluating Disperse Dyes Levelness of Superfine Polyester Fabric

The dyeing deference between the superfine and the con-ventional polyester fabric is discussed. The major threefactors affecting the level dyeing property of superfinepolyester-initial adsorption rate, desorption rate andinterface migration rate of dyestuffs at 70℃ are studied.The levelness improves considerably with decreased ini-tial adsorption rate, increased desorption rate and inter-face migration rate. And then a mathematical indexbased on them is established. The evaluation to dispersedyes resulting from it corresponds with their perfor-mance during industrial process. As new definitions, ini-tial adsorption rate and desorption rate of dyestuffs arefirstly introduced.

Development of Longer-Lasting Insect Repellence Cellulosic Based Curtain Fabrics

Long lasting insect repellent curtain fabrics were developed and characterized. Different types of fabrics which are generally used in manufacture of curtain fabrics were functionalized with monochlorotriazenyl β-cyclodextrin (MCT-β-CD) then treated with different concentration from permethrin to impart the fabric insect repellent properties. These fabrics were 100% cotton, cotton/viscose, cotton/linen, polyester/cotton, polyester/linen and polyester/viscose blend fabrics. The treated curtain fabrics were evaluated for insect repellent retention capacity against mosquitoes. The repellent efficacy comprises the determination of percent mosquitoes repelled, knockdown and killed (mortality) resulting from exposed mosquitoes to the treated fabric. Results obtained shows that, the insect repellent retention capacity of curtain fabrics functionalized with R-β-CD then treated with permethrin depends on the amount of β-CD moieties on the curtain fabrics, type of fabric and permethrin concentration. Higher action is obtained when the fabric was functionalized with 100 g/L, MCT-β-CD in alkaline medium followed by treatment with 15 g/L permethrin. The results show also that, curtain fabric made of cotton/linen shows highest mosquitoes repellent retention capacity and highest resistance against washing compared with 100% cotton or cotton/viscose or polyester based curtain fabrics. The insect repellent treatment of curtain fabrics did not adversely affect the tensile strength or drapability index of curtain

Analysis of the Composition and Physical and Mechanical Properties of Raw Materials for Thermal Insulation Fabrics

In this article, winter clothes, bedding, pillows, mattresses are produced in the Republic of Uzbekistan and used in the export products of foreign countries in domestic market shopping centers;existing nonwoven fabric samples were used as toys, children’s clothing as a heat retainer, a space-filler was selected on the basis of marketing survey analysis. Chemical bonding, processing technology, methods, linear density, thickness, air permeability, hygroscopicity, heat storage and heat transfer properties of the samples were analyzed experimentally based on the preparation methods, the fiber content was compared with the standard technology. The advantages and disadvantages of the samples were studied and recommendations for use in sewing according to consumer requirements were given.

Preparation and Characterization of PANI/PET Composite Conductive Fabric

Polyaniline /Polyester( PANI /PET) composite conductive fabric is prepared through in-situ polymerization process using aniline as monomer and PET fabric as matrix,which is treated with alkali deweighting and low temperature plasma. The property of PANI /PET composite conductive fabric is studied and characterized,including scanning electron microscope( SEM), infrared spectroscopy, conductivity, wash fastness and mechanical properties. The results show that the optimal polymerization conditions: the molar ratio of ammonium persulfate and aniline is1∶ 1,the concentration of sulfuric acid is 1 mol /L and reaction time is 90 min. Under optimum conditions,the surface resistivity of PANI /PET composite conductive fabric is about 170 Ω. After washed 5 times, the surface resistivity of PANI /PET composite conductive fabric is stable at 1 450 Ω. The breaking strength and breaking elongation of PANI /PET composite conductive fabric decrease compared with PET fabric.

Flexural Properties of Weft Knitted Fabric Reinforced Composites

Several different kinds of weft knitted fabrics from glass fiber yarns were used as reinforcement to make fabric/polyester composite laminates. Flexural tests were carried out to examine stress- deflection process and compare the mechanical properties in course and wale directions of these composites. The experimental results indicate that the numbers of load-bearing yarn in course and wale direction and the fabric density are the main factors influencing the ultimate tensile strength and initial elastic modulus of specimens.

Study on Shielding Effectiveness of Fabric for Electromagnetic Wave with Different Inlaid Distances of Metal Fibres

The electremagnetic radicalization has become more serious. The shielding effectiveness of polyester fabrics with different inlaid distance of parallel metal fibres to electromagnetic wave was studied in this paper on special instrument made by ourselves. The results of test show that the fabric with different inlaid distances of metal fibres and the testing angle between electric field plane and parallel metal fibres of have obvious effect on the shielding effectiveness of electromagnetic wave.

Preparation and Investigation of Mechanical and Physical Properties of Flax/Glass Fabric Reinforced Polymer Hybrid Composites

Synthetic reinforced composites affect the environment adversely and have become a global concern, causing increased natural composite demand for sustainability and cost effectiveness. Glass is a popular material that is highly consumed in reinforced composites for its superior mechanical strength. As opposed to that, flax obtained from flax stalks can be used as an alternative reinforcing material with synthetic fibers to minimize manmade fiber consumption. Hence, this research work addresses a few flax/glass-reinforced hybrid composites by using a thermoset polyester matrix. Here, six categories of samples are made, like neat flax, neat glass, and flax/glass fabric reinforced hybrid composite, followed by different stacking layer sequences and hand layout techniques during processing. Afterwards, the mechanical behavior, thermal stability, morphological behavior, and water absorption of hybrid samples were investigated. Among the developed samples, neat glass (NG) composite exhibits superior mechanical properties, while neat flax (NF) shows the lowest result. It is apparent that the mechanical properties and thermal stability of hybrid samples are in between NF and NG because, by adding glass with flax fabric, the strength of hybrid samples is increased. Moreover, it is noticeable that, due to multiple stacking layers of flax and glass, hybrid 3 and hybrid 4 show better strength than consecutive single stacking layers in hybrid 1 and hybrid 2. Among all hybrid composites, the H4 shows comparatively better mechanical and thermal properties due to having the glass layers on the outermost surface. In summary, this research work demonstrated the feasibility of flax fabric with glass fabric as a reinforced hybrid composite that can be used in automobile inner bodies, household furnishing, and home interior decoration.

Preparation and Investigation of Mechanical and Physical Properties of Flax/Glass Fabric Reinforced Polymer Hybrid Composites

Synthetic reinforced composites affect the environment adversely and have become a global concern, causing increased natural composite demand for sustainability and cost effectiveness. Glass is a popular material that is highly consumed in reinforced composites for its superior mechanical strength. As opposed to that, flax obtained from flax stalks can be used as an alternative reinforcing material with synthetic fibers to minimize manmade fiber consumption. Hence, this research work addresses a few flax/glass-reinforced hybrid composites by using a thermoset polyester matrix. Here, six categories of samples are made, like neat flax, neat glass, and flax/glass fabric reinforced hybrid composite, followed by different stacking layer sequences and hand layout techniques during processing. Afterwards, the mechanical behavior, thermal stability, morphological behavior, and water absorption of hybrid samples were investigated. Among the developed samples, neat glass (NG) composite exhibits superior mechanical properties, while neat flax (NF) shows the lowest result. It is apparent that the mechanical properties and thermal stability of hybrid samples are in between NF and NG because, by adding glass with flax fabric, the strength of hybrid samples is increased. Moreover, it is noticeable that, due to multiple stacking layers of flax and glass, hybrid 3 and hybrid 4 show better strength than consecutive single stacking layers in hybrid 1 and hybrid 2. Among all hybrid composites, the H4 shows comparatively better mechanical and thermal properties due to having the glass layers on the outermost surface. In summary, this research work demonstrated the feasibility of flax fabric with glass fabric as a reinforced hybrid composite that can be used in automobile inner bodies, household furnishing, and home interior decoration.

丙烯酸酯增深剂的制备及在涤纶织物中的应用

利用乳液聚合法制备丙烯酸酯增深剂,并用于阿拉伯国家专用黑色涤纶织物增深整理。当增深剂质量浓度为40 g/L,焙烘温度为140℃,焙烘时间为3 min时,整理织物的增深比达39.46%,撕裂强力、耐摩擦和耐皂洗色牢度无明显变化,织物表面被一层颗粒状微球组成的膜状物包覆,织物表面C元素质量分数从73.22%减少到70.17%,O元素质量分数从26.78%减少到25.44%,新引入了4.39%N元素。

中国废旧军服面料回收利用的研究现状及发展前景

为促进废旧军服面料的高值化回收利用,总结了国内07式军服的种类及其面料特征,系统分析了目前开纤纺纱法、再生聚酯切片法、涤棉分离技术等废旧军服面料的回收利用方法,并对废旧军服面料回收再利用的发展前景进行展望。分析表明:目前废旧军服面料的回收利用主要聚焦于简单再利用或回收涤纶组分制备高值再生聚酯切片,较少关注军服面料中其余组分的高值回收利用。针对废旧军服面料中含量相对较高的涤棉混纺面料,采用有效的涤棉分离技术高效分离涤纶和棉纤维,并以此作为原料分别制备再生聚酯切片和再生溶解浆,进一步以再生棉浆粕为原料制备再生纤维素产品将非常有前景。因而,开发高效的涤棉分离、废旧涤纶和棉纤维的高值化利用技术是实现废旧军服面料综合利用的重要发展方向。

抗坏血酸对番茄红素染色性能的影响

为研究番茄红素对织物的染色可行性,以抗坏血酸作为色素稳定剂,用番茄红素对涤纶仿真丝织物进行染色试验,并对染色织物的染色牢度进行评价。利用吸光度值讨论抗坏血酸对番茄红素色素稳定性的影响,根据染色织物的K/S值和L^(*)、a^(*)、b^(*)值研究了染色织物的染色性能,并测定染色织物的色牢度。结果表明:抗坏血酸能提高番茄红素色素的稳定性,对番茄红素起到护色作用;在染色过程中,抗坏血酸的加入能提高染色织物的K/S值,但过量的加入并不能起到增深的作用;染色织物具有一定的色牢度。