The chlorinated polypropylene (PPC1)-polypyrrole (PPy) conducting films were successfully synthesized by a novel method for the first time. The mechanical properties of PPC1-PPy conducting films were investigated by m...The chlorinated polypropylene (PPC1)-polypyrrole (PPy) conducting films were successfully synthesized by a novel method for the first time. The mechanical properties of PPC1-PPy conducting films were investigated by means of stress-strain test and DMA. It was shown that the rupture strength and initial modulus increase with the increase of polypyrrole content , but the elongation at rupture decrease. Besides, the glass transition temperature (Tg) is increasing to a plateau when polypyrrole content attains 6%. Moreover, a new mechanical model to describe the mechanical properties of PPC1-PPy blend system is established by changing the correction factor in Mooney model. It was found that the theoretic value of the model is well coincident with the experimental results.展开更多
Effects of both electron beam irradiation on the properties of polypropylene （PP） films and the irradiation on the different layers of a multilayer PP film are studied. A Fourier transform infrared spectroscope was ...Effects of both electron beam irradiation on the properties of polypropylene （PP） films and the irradiation on the different layers of a multilayer PP film are studied. A Fourier transform infrared spectroscope was used to investigate the chemical structure of the films. The results showed that the chemical properties of the first layer were improved, that is, more functional groups responsible for dye ability and hydrophilicity of the film were produced on its surface, while noticeable improvement was not detected on the surface of other layers. This was also confirmed by testing the dye ability of the layers. However, the results obtained by atomic force microscopy showed that the electron irradiation caused some topographical changes, not only on the surface of the first layer but also on the others.展开更多
The chlorinated polypropylene-polypyrrole composite film was synthesized by means of a newmethod for the first time. The effects of various conditions on polymerization and the electric con-ductivity of PPCl-PPy compo...The chlorinated polypropylene-polypyrrole composite film was synthesized by means of a newmethod for the first time. The effects of various conditions on polymerization and the electric con-ductivity of PPCl-PPy composite film were investigated. It was found that PPCl-FeCl<sub>3</sub> mixturehad an excellent film-forming ability and PPCl-PPy composite film could attain high conductivityat low content of polypyrrole and was stable for heat and atmosphere.展开更多
The radiofrequency plasma (13.56 MHz) was employed to polymerize trimethyl borate (TMB) monomer/N2 gas mixture on the surface of biaxially oriented polypropylene (BOPP) films. Plasma polymer coated polypropylene films...The radiofrequency plasma (13.56 MHz) was employed to polymerize trimethyl borate (TMB) monomer/N2 gas mixture on the surface of biaxially oriented polypropylene (BOPP) films. Plasma polymer coated polypropylene films were examined by flame retardancy test (limiting oxygen index, LOI). The highest LOI value calculated for the untreated BOPP sample was 18.4 (v/v O2%) and 24.2 (v/v O2%) for the 55 W 30 minutes treated sample. The plasma polymers were characterized by FTIR spectroscopy and AFM. According to the FTIR results, the -OH, B-CH3, B-O, and BH2 functional groups were detected. It was found that the highest surface roughness belonged to 40 W 30 min treated BOPP sample which was calculated as 9.78 nm (10 μm × 10 μm). Moreover, the wettability of the modified BOPP film surfaces was characterized via contact angle measurements. The water contact angle values have decreased from 109.6? to the lowest value of 68.2? after the plasma treatment. The results showed that TMB/N2 plasma modification could be used as an alternative method for the enhancement of flame retardancy and hydrophilicity of BOPP film.展开更多
文摘The chlorinated polypropylene (PPC1)-polypyrrole (PPy) conducting films were successfully synthesized by a novel method for the first time. The mechanical properties of PPC1-PPy conducting films were investigated by means of stress-strain test and DMA. It was shown that the rupture strength and initial modulus increase with the increase of polypyrrole content , but the elongation at rupture decrease. Besides, the glass transition temperature (Tg) is increasing to a plateau when polypyrrole content attains 6%. Moreover, a new mechanical model to describe the mechanical properties of PPC1-PPy blend system is established by changing the correction factor in Mooney model. It was found that the theoretic value of the model is well coincident with the experimental results.
文摘Effects of both electron beam irradiation on the properties of polypropylene （PP） films and the irradiation on the different layers of a multilayer PP film are studied. A Fourier transform infrared spectroscope was used to investigate the chemical structure of the films. The results showed that the chemical properties of the first layer were improved, that is, more functional groups responsible for dye ability and hydrophilicity of the film were produced on its surface, while noticeable improvement was not detected on the surface of other layers. This was also confirmed by testing the dye ability of the layers. However, the results obtained by atomic force microscopy showed that the electron irradiation caused some topographical changes, not only on the surface of the first layer but also on the others.
文摘The chlorinated polypropylene-polypyrrole composite film was synthesized by means of a newmethod for the first time. The effects of various conditions on polymerization and the electric con-ductivity of PPCl-PPy composite film were investigated. It was found that PPCl-FeCl<sub>3</sub> mixturehad an excellent film-forming ability and PPCl-PPy composite film could attain high conductivityat low content of polypyrrole and was stable for heat and atmosphere.
基金supported by National Boron Research Institute(BOREN)contact grant number BOREN-2006-C-02The State Planning Organization(DPT)contact grant number 2001K-120590.
文摘The radiofrequency plasma (13.56 MHz) was employed to polymerize trimethyl borate (TMB) monomer/N2 gas mixture on the surface of biaxially oriented polypropylene (BOPP) films. Plasma polymer coated polypropylene films were examined by flame retardancy test (limiting oxygen index, LOI). The highest LOI value calculated for the untreated BOPP sample was 18.4 (v/v O2%) and 24.2 (v/v O2%) for the 55 W 30 minutes treated sample. The plasma polymers were characterized by FTIR spectroscopy and AFM. According to the FTIR results, the -OH, B-CH3, B-O, and BH2 functional groups were detected. It was found that the highest surface roughness belonged to 40 W 30 min treated BOPP sample which was calculated as 9.78 nm (10 μm × 10 μm). Moreover, the wettability of the modified BOPP film surfaces was characterized via contact angle measurements. The water contact angle values have decreased from 109.6? to the lowest value of 68.2? after the plasma treatment. The results showed that TMB/N2 plasma modification could be used as an alternative method for the enhancement of flame retardancy and hydrophilicity of BOPP film.
