Replacing micro-reinforcing fibers with carbon nanotubes(CNTs)is beneficial for improving the impact properties of ultra-high performance concrete(UHPC);however,the weak wettability and dispersibility of CNTs and the ...Replacing micro-reinforcing fibers with carbon nanotubes(CNTs)is beneficial for improving the impact properties of ultra-high performance concrete(UHPC);however,the weak wettability and dispersibility of CNTs and the weakly bonded interface between CNTs and UHPC limit their effectiveness as composites.Therefore,this study aims to enhance the reinforcement effect of CNTs on the impact properties of UHPC via functionalization.Unlike ordinary CNTs,functionalized CNTs with carboxyl or hydroxyl groups can break the Si-O-Ca-O-Si coordination bond in the C-S-H gel and form a new network in the UHPC matrix,effectively inhibiting the dislocation slip inside UHPC matrix.Furthermore,functionalized CNTs,particularly carboxyl-fu nctionalized CNTs,co ntrol the crystallization process and microscopic morphology of the hydration products,significantly decreasing and even eliminating the width of the aggregate-matrix interface transition zone of the UHPC.Moreover,the functionalized CNTs further decrease the attraction of the negatively charged silicate tetrahedron to Ca2+in the C-S-H gel,while modifying the pore structure(particularly the nanoscale pore structure)of UHPC,leading to the expansion of the intermediate CS-H layer.The changes in the microstructures of UHPC brought about by the functionalized CNTs significantly enhance its dynamic compressive strength,peak strain,impact toughness,and impact dissipation energy at strain rates of 200-800 s^(-1).Impact performance of UHPC containing a small amount of carboxyl-functionalized CNTs(especially the short ones)is generally better than that of UHPC containing hydroxyl-functionalized and ordinary CNTs;it is even superior to that of UHPC with a high steel fiber content.展开更多
A recycled aggregate(RA)was prepared by crushing and sieving demolished discarded concrete pavements and was subsequently tested and analyzed to determine its various physical properties.On this basis,pervious concre...A recycled aggregate(RA)was prepared by crushing and sieving demolished discarded concrete pavements and was subsequently tested and analyzed to determine its various physical properties.On this basis,pervious concrete(PC)mix proportions were designed.Coarse RA particles with sizes of 5–10 and 10–20 mm were selected.Concrete specimens were prepared with a water–cement ratio of 0.3,an aggregate–cement ratio of 4.5,the substitute rates of RA with 0,25%,50%,75%and a single-/double-gap-graded RA mix(mass ratio of particles with sizes of 5–10 mm to particles with sizes of 10–20 mm:1:1,1:2,2:1,2:3 and 3:2).Various properties of the RA-containing PC(RPC)were determined by analyzing the compressive strength,splitting tensile strength,effective porosity,permeation coefficient and impact and abrasion resistance of the specimens.The results showed the following:The density of the RPC decreased with an increasing RA replacement ratio.The density of the RPC prepared with a double-gapgraded RA mix was lower than that prepared with a single-gap-graded RA(particle size:10–20 mm)mix.The permeation coefficient of the RPC increased with increasing porosity.The splitting tensile strength of the RPC was positively correlated with its compressive strength.The compressive strength of the RPC decreased with increasing porosity.The regression analysis showed that the impact and abrasion resistance of the RPC increased with increasing compressive strength.In addition,all of the RPC specimens met the strength and permeation requirements.This study can provide theoretical support for the application of RPC.展开更多
基金the National Natural Science Foundation of China(51978127 and 51908103)the Fundamental Research Funds for the Central Universities(DUT21RC(3)039)the China Scholarship Council Foundation(202006060103)for providing funding to carry out this investigation。
文摘Replacing micro-reinforcing fibers with carbon nanotubes(CNTs)is beneficial for improving the impact properties of ultra-high performance concrete(UHPC);however,the weak wettability and dispersibility of CNTs and the weakly bonded interface between CNTs and UHPC limit their effectiveness as composites.Therefore,this study aims to enhance the reinforcement effect of CNTs on the impact properties of UHPC via functionalization.Unlike ordinary CNTs,functionalized CNTs with carboxyl or hydroxyl groups can break the Si-O-Ca-O-Si coordination bond in the C-S-H gel and form a new network in the UHPC matrix,effectively inhibiting the dislocation slip inside UHPC matrix.Furthermore,functionalized CNTs,particularly carboxyl-fu nctionalized CNTs,co ntrol the crystallization process and microscopic morphology of the hydration products,significantly decreasing and even eliminating the width of the aggregate-matrix interface transition zone of the UHPC.Moreover,the functionalized CNTs further decrease the attraction of the negatively charged silicate tetrahedron to Ca2+in the C-S-H gel,while modifying the pore structure(particularly the nanoscale pore structure)of UHPC,leading to the expansion of the intermediate CS-H layer.The changes in the microstructures of UHPC brought about by the functionalized CNTs significantly enhance its dynamic compressive strength,peak strain,impact toughness,and impact dissipation energy at strain rates of 200-800 s^(-1).Impact performance of UHPC containing a small amount of carboxyl-functionalized CNTs(especially the short ones)is generally better than that of UHPC containing hydroxyl-functionalized and ordinary CNTs;it is even superior to that of UHPC with a high steel fiber content.
基金This study was funded by the National key research and development program fund project(No.2018YFC0406803).
文摘A recycled aggregate(RA)was prepared by crushing and sieving demolished discarded concrete pavements and was subsequently tested and analyzed to determine its various physical properties.On this basis,pervious concrete(PC)mix proportions were designed.Coarse RA particles with sizes of 5–10 and 10–20 mm were selected.Concrete specimens were prepared with a water–cement ratio of 0.3,an aggregate–cement ratio of 4.5,the substitute rates of RA with 0,25%,50%,75%and a single-/double-gap-graded RA mix(mass ratio of particles with sizes of 5–10 mm to particles with sizes of 10–20 mm:1:1,1:2,2:1,2:3 and 3:2).Various properties of the RA-containing PC(RPC)were determined by analyzing the compressive strength,splitting tensile strength,effective porosity,permeation coefficient and impact and abrasion resistance of the specimens.The results showed the following:The density of the RPC decreased with an increasing RA replacement ratio.The density of the RPC prepared with a double-gapgraded RA mix was lower than that prepared with a single-gap-graded RA(particle size:10–20 mm)mix.The permeation coefficient of the RPC increased with increasing porosity.The splitting tensile strength of the RPC was positively correlated with its compressive strength.The compressive strength of the RPC decreased with increasing porosity.The regression analysis showed that the impact and abrasion resistance of the RPC increased with increasing compressive strength.In addition,all of the RPC specimens met the strength and permeation requirements.This study can provide theoretical support for the application of RPC.
