Modeling Real Objects for Kansei-based Shape Retrieval

A large number of 3D models are created on computers and available for networks. Some content-based retrieval technologies are indispensable to find out particular data from such anonymous datasets. Though several shape retrieval technologies have been developed, little attention has been given to the points on human＇s sense and impression （as known as Kansei） in the conventional techniques, In this paper, the authors propose a novel method of shape retrieval based on shape impression of human＇s Kansei. The key to the method is the Gaussian curvature distribution from 3D models as features for shape retrieval. Then it classifies the 3D models by extracted feature and measures similarity among models in storage.

Human-Object Interaction Recognition Based on Modeling Context

This paper proposes a method to recognize human-object interactions by modeling context between human actions and interacted objects.Human-object interaction recognition is a challenging task due to severe occlusion between human and objects during the interacting process.Since that human actions and interacted objects provide strong context information,i.e.some actions are usually related to some specific objects,the accuracy of recognition is significantly improved for both of them.Through the proposed method,both global and local temporal features from skeleton sequences are extracted to model human actions.In the meantime,kernel features are utilized to describe interacted objects.Finally,all possible solutions from actions and objects are optimized by modeling the context between them.The results of experiments demonstrate the effectiveness of our method.

Review of heterogeneous material objects modeling in additive manufacturing

This review investigates the recent developments of heterogeneous objects modeling in additive manufacturing(AM),as well as general problems and widespread solutions to the modeling methods of heterogeneous objects.Prevalent heterogeneous object representations are generally categorized based on the different expression or data structure employed therein,and the state-of-the-art of process planning procedures for AM is reviewed via different vigorous solutions for part orientation,slicing methods,and path planning strategies.Finally,some evident problems and possible future directions of investigation are discussed.

Three dimensional modeling and developing of tunnel based on objectarx technique

Studied the methods of 3D modeling in tunnel of underground and realized the3D visual expression of tunnel using language Object ARX CAD.

Objective Model Selection in Physics: Exploring the Finite Information Quantity Approach

Traditional methods for selecting models in experimental data analysis are susceptible to researcher bias, hindering exploration of alternative explanations and potentially leading to overfitting. The Finite Information Quantity (FIQ) approach offers a novel solution by acknowledging the inherent limitations in information processing capacity of physical systems. This framework facilitates the development of objective criteria for model selection (comparative uncertainty) and paves the way for a more comprehensive understanding of phenomena through exploring diverse explanations. This work presents a detailed comparison of the FIQ approach with ten established model selection methods, highlighting the advantages and limitations of each. We demonstrate the potential of FIQ to enhance the objectivity and robustness of scientific inquiry through three practical examples: selecting appropriate models for measuring fundamental constants, sound velocity, and underwater electrical discharges. Further research is warranted to explore the full applicability of FIQ across various scientific disciplines.

Modeling Method of Automotive Body CAN/LIN Nets Application Protocol Based on Object-oriented Colored Petri Net

Recently automotive nets are adopted to solve increasing problems in automotive electronic systems.Technologies of automotive local area network from CAN and LIN can solve the problems of the increasing of wire bunch weight and lack in module installation space.However,the multilayer automotive nets software becomes more and more complex,and the development expense is difficult to predict and to keep in check.In this paper,the modeling method of hierarchical automotive nets and the substitution operation based on object-oriented colored Petri net(OOCPN) are proposed.The OOCPN model which analyzes the software structure and validates the collision mechanism of CAN/LIN bus can speed the automobile system development.First,the subsystems are divided and modeled by object-oriented Petri net(OOPN).According to the sets of message sharing relations,the message ports among them are set and the communication gate transitions are defined.Second,the OOPN model is substituted step by step until the inner objects in the automotive body control modules(BCM) are indivisible and colored by colored Petri net(CPN).And the color subsets mark the node messages for the collision mechanism.Third,the OOCPN model of the automotive body CAN/LIN nets is assembled,which keeps the message sets and the system can be expanded.The proposed model is used to analyze features of information sharing among the objects,and it is also used to describe each subsystem real-time behavior of processing messages and implemental device controllers operating,and puts forward a reasonable software framework for the automotive body control subsystem.The research can help to design the communication model in the automotive body system effectively and provide a convenient and rapid way for developing the logical hierarchy software.

STUDY ON JOINING PROCESS FOR LAMINATED OBJECT MANUFACTURING USING METALAS MODELING MATERIALS

In order to solve some key problems associated with the rapid manufacturingof metallic functional part, a new technique using vacuum solid-state pressure diffusion weldingprocess to join the metallic slice sheets is put forward. The following results can be drawn fromthe experiments: only 1 percent shrinkage happened in the stack direction and it came from theregular system error. The atoms diffuse between joint interfaces clearly and new grains formedmeanwhile. The average shear strength of welding zone is more than 100 MPa and micro hardness ofwelding zone is almost the same as that of matrix. It is shown from above results that the vacuumsolid-state pressure diffusion welding process is an available technique to join metal slice sheetsfor the rapid manufacturing of metallic functional parts.

STOCHASTIC OBJECT-ORIENTED PETRI NETS (SOPNS) AND ITS APPLICATION IN MODELING OF MANUFACTURING SYSTEM RELIABILITY

Object-oriented Petri nets (OPNs) is extended into stochastic object-oriented Petri nets (SOPNs) by associating the OPN of an object with stochastic transitions and introducing stochastic places. The stochastic transition of the SOPNs of a production resources can be used to model its reliability, while the SOPN of a production resource can describe its performance with reliability considered. The SOPN model of a case production system is built to illustrate the relationship between the system's performances and the failures of individual production resources.

Modelica-based Object-orient Modeling of Rotor System with Multi-Faults

Modelica-based object-orient method is proved to be rapid, accurate and easy to modify, which is suitable for prototype modeling and simulation of rotor system, whose parameters need to be modified frequently. Classical non-object-orient method appears to be inefficient because the code is difficult to modify and reuse. An adequate library for object-orient modeling of rotor system with multi-faults is established, a comparison with non-object-orient method on Jeffcott rotor system and a case study on turbo expander with multi-faults are implemented. The relative tolerance between object-orient method and non-object-orient is less than 0.03%, which proves that these two methods are as accurate as each other. Object-orient modeling and simulation is implemented on turbo expander with crack, rub-impact, pedestal looseness and multi-faults simultaneously. It can be conclude from the case study that when acting on compress side of turbo expander separately, expand wheel is not influenced greatly by crack fault, the existence of rub-impact fault forces expand wheel into quasi-periodic motion and the orbit of expand wheel is deformed and enhanced almost 1.5 times due to pedestal looseness. When acting simultaneously, multi-faults cannot be totally decomposed but can be diagnosed from the feature of vibration. Object-orient method can enhance the efficiency of modeling and simulation of rotor system with multi-faults, which provides an efficient method on prototype modeling and simulation.

Conversion of Object Oriented System into Software Product Line with Delta Modeling Abstract Behavioral Specification

This article contains a system conversion from object oriented design into Software Product Line (SPL) using delta modeling of Abstract Behavioral Specification (ABS). ABS is a modeling language which targets system with high level of variety and supports SPL development with delta modeling. The case study of this thesis is a digital library system called Library Automation and Digital Archive (LONTAR). Originally, LONTAR only uses SOAP-based web service. With ABS, LONTAR will be converted into SPL and implement another web service called REST. The motivation of this conversion of LONTAR from object oriented into SPL is because it is easier to develop system with ABS than using regular object oriented. Product definition in ABS is relatively easier than creating a new subclass and do customization to make it works well.

Several Strategies on 3D Modeling of Manmade Objects

Several different strategies of 3D modeling are a do pted for different kinds of manmade objects. Firstly, for those manmade objects with regular structure, if 2D information is available and elevation information can be obtained conveniently, then 3D modeling of them can be executed directly . Secondly, for those manmade objects with complicated structure comparatively a nd related stereo images pair can be acquired, in the light of topology-based 3 D model we finish 3D modeling of them by integrating automatic and semi-automat ic object extraction. Thirdly, for the most complicated objects whose geometrica l information cannot be got from stereo images pair completely, we turn to topol ogical 3D model based on CAD.

3D Object Detection with Attention:Shell-Based Modeling

LIDAR point cloud-based 3D object detection aims to sense the surrounding environment by anchoring objects with the Bounding Box(BBox).However,under the three-dimensional space of autonomous driving scenes,the previous object detection methods,due to the pre-processing of the original LIDAR point cloud into voxels or pillars,lose the coordinate information of the original point cloud,slow detection speed,and gain inaccurate bounding box positioning.To address the issues above,this study proposes a new two-stage network structure to extract point cloud features directly by PointNet++,which effectively preserves the original point cloud coordinate information.To improve the detection accuracy,a shell-based modeling method is proposed.It roughly determines which spherical shell the coordinates belong to.Then,the results are refined to ground truth,thereby narrowing the localization range and improving the detection accuracy.To improve the recall of 3D object detection with bounding boxes,this paper designs a self-attention module for 3D object detection with a skip connection structure.Some of these features are highlighted by weighting them on the feature dimensions.After training,it makes the feature weights that are favorable for object detection get larger.Thus,the extracted features are more adapted to the object detection task.Extensive comparison experiments and ablation experiments conducted on the KITTI dataset verify the effectiveness of our proposed method in improving recall and precision.

Study on business process modeling based on object-oriented Petri Net

In the developing course of the information system, the modeling method of information system and model expressing problem are very important. This paper through discussing the facing object of Petri network, expatiates the basic problem of how to set up the business procedure model on the basis of Petri network, and shows the expressing and storing methods of the model in computer way.

The Feature-Based a New Object Coding Approach for Prismatic Parts at the Part Modeling

Use of features in order to achieve the integration of design and manufacture has been considered to be a key factor recent years. Features such as manufacturing properties form the workpiece. Features are structured systematically through object oriented modeling. This article explains an object coding method developed for prismatic workpieces and the use of that method in process planning. Features have been determined and modeled as objects. Features have been coded according to their types and locations on the workpiece in this given method. Feature codings have been seen to be very advantageous in process planning.

Object-Oriented Modeling of the Variation of Acceleration and Deceleration Characteristics in Relation to Speed Bands for Railway Vehicles

Automated operation and artificial intelligence technology have become essential for ensuring the safety, efficiency, and punctuality of railways, with applications such as ATO (Automatic Train Operation). In this study, the authors propose a method to efficiently simulate the kinematic characteristics of railroad vehicles depending on their speed zone. They utilized the function overloading function supported by a programming language and applied the fourth-order Lunge-Kutta method for dynamic simulation. By constructing an object model, the authors calculated vehicle characteristics and TPS and compared them with actual values, verifying that the developed model represents the real-life vehicle characteristics accurately. The study highlights potential improvements in automated driving and energy consumption optimization in the railway industry.

Object-Oriented Modeling of Virtual Assembly Process

Virtual assembly is a Virtual Reality (VR) based engineering application which allows engineers to evaluate, analyze, and plan the assembly of mechanical systems. To model the virtual assembly process, new methodology must be applied. Based on the idea that the virtual assembly system is an event driven system, the interactive behavior and information model is proposed to describe the dynamic process of virtual assembly. Definition of the object-oriented model of virtual assembly is put forward.

LOCALIZATION OF OBJECT (SPINE) IN MEDICAL IMAGE USING ACTIVE SHAPE MODELS

Active shape models (ASM), consisting of a shape model and a local gray-level appearance model, can be used to locate the objects in images. In original ASM scheme, the model of object′s gray-level variations is based on the assumption of one-dimensional sampling and searching method. In this work a new way to model the gray-level appearance of the objects is explored, using a two-dimensional sampling and searching technique in a rectangular area around each landmark of object shape. The ASM based on this improvement is compared with the original ASM on an identical medical image set for task of spine localization. Experiments demonstrate that the method produces significantly fast, effective, accurate results for spine localization in medical images.

OBJECT ORIENTED DATA MODELLING WITH APPLICATIONS TO CAD

An object oriented data modelling in computer aided design (CAD) databases is focused. Starting with the discussion of data modelling requirements for CAD applications, appropriate data modelling features are introduced herewith. A feasible approach to select the “best” data model for an application is to analyze the data which has to be stored in the database. A data model is appropriate for modelling a given task if the information of the application environment can be easily mapped to the data model. Thus, the involved data are analyzed and then object oriented data model appropriate for CAD applications are derived. Based on the reviewed object oriented techniques applied in CAD, object oriented data modelling in CAD is addressed in details. At last 3D geometrical data models and implementation of their data model using the object oriented method are presented.