To find out the high-quality polyacrylonitrile (PAN) fibers, some differences are sought by comparing domestic PAN fibers with the foreign ones. X-ray diffractometer (XRD), transmission electron microscope (TEM), Four...To find out the high-quality polyacrylonitrile (PAN) fibers, some differences are sought by comparing domestic PAN fibers with the foreign ones. X-ray diffractometer (XRD), transmission electron microscope (TEM), Fourier transform infrared (FT-IR) spectrometer, elemental analyzer, tensile-testing machine and high-temperature differential scanning calorimeter (DSC) are used to characterize the individual microstructure, chemical structure, elemental content, mechanical properties and thermal properties. It is found that high-quality PAN fibers have high density, lower titre, higher or adequate tensile strength, and they also have better conglomeration structure, smaller crystal dimension with dispersive distribution, less microvoids and flaws.展开更多
A novel carbon fiber pretreatment was proposed.Polyacrylonitrile(PAN)-based carbon fibers were first anodized in H3PO4 electrolyte to achieve an active surface,and then coated with Mo-B catalysts by immersed the carbo...A novel carbon fiber pretreatment was proposed.Polyacrylonitrile(PAN)-based carbon fibers were first anodized in H3PO4 electrolyte to achieve an active surface,and then coated with Mo-B catalysts by immersed the carbon fibers in a uniformly dispersed Mo-B sol.The as-treated carbon fibers were then graphitized at 2 400 ℃ for 2 h.The structural changes were characterized by X-ray diffractometry(XRD),Raman spectroscopy,scanning electron microscopy(SEM) and high-resolution transmission electronic microscopy(HRTEM).The results show that much better graphitization can be achieved in the presence of Mo-B,with an interlayer spacing(d002) of 0.335 8 nm and a crystalline size(Lc) of 28 nm.展开更多
The evolvement of microstructure and properties of nascent fibers during coagulation process in the polyacrylonitrile （PAN） wet-spinning and the effect of coagulation bath conditions on the structure and properties ...The evolvement of microstructure and properties of nascent fibers during coagulation process in the polyacrylonitrile （PAN） wet-spinning and the effect of coagulation bath conditions on the structure and properties of the nascent fibers were investigated by the means of X-ray diffraction （XRD）, scanning electron microscope （SEM）, fiber fineness machine, fiber tensile strength machine, etc. The experimental results indicate that the nascent fibers become denser and have fewer inner defects, the diameter of nascent fibers shrink and the crystallization degree of nascent fibers gradually increases with the increasing of coagulation time. Too large spinning tension leads to grooves occurring on surface of fibers. To obtain circular cross-section of nascent fibers the optimal coagulation conditions are 50 ℃, 65% （concentration） and 0.9 （draw ratio）.展开更多
A low-cost rout for modification the polyacrylontrile（PAN） precursor fibers was developed.The approach involved pretreatment PAN precursor fibers with UV irradiation for various periods of time before the fibers wer...A low-cost rout for modification the polyacrylontrile（PAN） precursor fibers was developed.The approach involved pretreatment PAN precursor fibers with UV irradiation for various periods of time before the fibers were stabilized.The effect of UV irradiation on the chemical structure,orientation factor,density,crystallite size and morphology of the fibers in the process of stabilization was characterized by use of fourier transform infrared spectroscopy（FTIR）,float-sink procedure,X-ray diffraction（XRD）,scanning electron microscope（SEM）,respectively.The results showed that UV irradiation could increase the density of the fibers in stabilization process.FTIR analysis indicated that the cyclization of nitrile groups was initiated at room temperature by UV irradiation.The transformation of C≡N groups to C=N ones was accelerated in the process of stabilization.The orientation factor of irradiated fibers was also increased.The crystallite size was decreased at first and increased later,and the better irradiation time of UV was 3 min according to the XRD test.SEM analysis indicated that irradiation could decrease the internal and surface defects of the stabilized fibers treated at 300 ℃.展开更多
When the PAN-based stabilized fiber(PAN-SF) was converted to the carbon fiber, the effect of some of the carbonizing parameters on the structure and properties of the resulting carbon fibers, such as the molecular str...When the PAN-based stabilized fiber(PAN-SF) was converted to the carbon fiber, the effect of some of the carbonizing parameters on the structure and properties of the resulting carbon fibers, such as the molecular structure development, element contents, morphology and mechanical properties, was discussed. The results show that the carbonizing temperature, the purity of the inert gas and the de-oil pretreatment of the tiber have a great influence on them.展开更多
The deformation resistance effect of polyacrylonitrile （PAN）-based carbon fibers was investigated, and the variatipn law of electrical resistivity under tensile stress was analyzed. The results show that the gauge f...The deformation resistance effect of polyacrylonitrile （PAN）-based carbon fibers was investigated, and the variatipn law of electrical resistivity under tensile stress was analyzed. The results show that the gauge factor （fractional change in resistance per unit strain） of PAN-based carbon fibers is 1.38, which is lower than that of the commonly-used resistance strain gauge. These may due to that the electrical resistivity of carbon fibers decreases under tensile stress. In addition when the carbon fibers are stretched, the change of its resistance is caused by fiber physical dimension and the change of electric resistivity, and mainly caused by the change of physical dimension. The mechanical properties of carbon fiber monofilament were also measured.展开更多
文摘To find out the high-quality polyacrylonitrile (PAN) fibers, some differences are sought by comparing domestic PAN fibers with the foreign ones. X-ray diffractometer (XRD), transmission electron microscope (TEM), Fourier transform infrared (FT-IR) spectrometer, elemental analyzer, tensile-testing machine and high-temperature differential scanning calorimeter (DSC) are used to characterize the individual microstructure, chemical structure, elemental content, mechanical properties and thermal properties. It is found that high-quality PAN fibers have high density, lower titre, higher or adequate tensile strength, and they also have better conglomeration structure, smaller crystal dimension with dispersive distribution, less microvoids and flaws.
基金Project(2006CB600903) supported by the National Basic Research Program of China
文摘A novel carbon fiber pretreatment was proposed.Polyacrylonitrile(PAN)-based carbon fibers were first anodized in H3PO4 electrolyte to achieve an active surface,and then coated with Mo-B catalysts by immersed the carbon fibers in a uniformly dispersed Mo-B sol.The as-treated carbon fibers were then graphitized at 2 400 ℃ for 2 h.The structural changes were characterized by X-ray diffractometry(XRD),Raman spectroscopy,scanning electron microscopy(SEM) and high-resolution transmission electronic microscopy(HRTEM).The results show that much better graphitization can be achieved in the presence of Mo-B,with an interlayer spacing(d002) of 0.335 8 nm and a crystalline size(Lc) of 28 nm.
基金Funded by the Science and Technology Program of the Higher Education Institutions of Shandong Province (No. J09LD06)the Doctoral Fund of University of Jinan (No. XBS0813)
文摘The evolvement of microstructure and properties of nascent fibers during coagulation process in the polyacrylonitrile （PAN） wet-spinning and the effect of coagulation bath conditions on the structure and properties of the nascent fibers were investigated by the means of X-ray diffraction （XRD）, scanning electron microscope （SEM）, fiber fineness machine, fiber tensile strength machine, etc. The experimental results indicate that the nascent fibers become denser and have fewer inner defects, the diameter of nascent fibers shrink and the crystallization degree of nascent fibers gradually increases with the increasing of coagulation time. Too large spinning tension leads to grooves occurring on surface of fibers. To obtain circular cross-section of nascent fibers the optimal coagulation conditions are 50 ℃, 65% （concentration） and 0.9 （draw ratio）.
基金Funded by the National Natural Science Foundation of China (No. 51073098)the State Key Laboratory of Polymer Material Engineering(Sichuan University) (Nos.KF200901 and 2030925123008)
文摘A low-cost rout for modification the polyacrylontrile（PAN） precursor fibers was developed.The approach involved pretreatment PAN precursor fibers with UV irradiation for various periods of time before the fibers were stabilized.The effect of UV irradiation on the chemical structure,orientation factor,density,crystallite size and morphology of the fibers in the process of stabilization was characterized by use of fourier transform infrared spectroscopy（FTIR）,float-sink procedure,X-ray diffraction（XRD）,scanning electron microscope（SEM）,respectively.The results showed that UV irradiation could increase the density of the fibers in stabilization process.FTIR analysis indicated that the cyclization of nitrile groups was initiated at room temperature by UV irradiation.The transformation of C≡N groups to C=N ones was accelerated in the process of stabilization.The orientation factor of irradiated fibers was also increased.The crystallite size was decreased at first and increased later,and the better irradiation time of UV was 3 min according to the XRD test.SEM analysis indicated that irradiation could decrease the internal and surface defects of the stabilized fibers treated at 300 ℃.
文摘When the PAN-based stabilized fiber(PAN-SF) was converted to the carbon fiber, the effect of some of the carbonizing parameters on the structure and properties of the resulting carbon fibers, such as the molecular structure development, element contents, morphology and mechanical properties, was discussed. The results show that the carbonizing temperature, the purity of the inert gas and the de-oil pretreatment of the tiber have a great influence on them.
基金Funded by the National Natural Science Foundation of China (No.10672128 and 50878170)
文摘The deformation resistance effect of polyacrylonitrile （PAN）-based carbon fibers was investigated, and the variatipn law of electrical resistivity under tensile stress was analyzed. The results show that the gauge factor （fractional change in resistance per unit strain） of PAN-based carbon fibers is 1.38, which is lower than that of the commonly-used resistance strain gauge. These may due to that the electrical resistivity of carbon fibers decreases under tensile stress. In addition when the carbon fibers are stretched, the change of its resistance is caused by fiber physical dimension and the change of electric resistivity, and mainly caused by the change of physical dimension. The mechanical properties of carbon fiber monofilament were also measured.
