Although multifunctional aerogels are expected to be used in applications such as portable electronic devices,it is still a great challenge to confer multifunctionality to aerogels while maintaining their inherent mic...Although multifunctional aerogels are expected to be used in applications such as portable electronic devices,it is still a great challenge to confer multifunctionality to aerogels while maintaining their inherent microstructure.Herein,a simple method is proposed to prepare multifunctional NiCo/C aerogels with excellent electromagnetic wave absorption properties,superhydrophobicity,and self-cleaning by water-induced NiCo-MOF self-assembly.Specifically,the impedance matching of the three-dimensional(3D)structure and the interfacial polarization provided by CoNi/C as well as the defect-induced dipole polarization are the primary contributors to the broadband absorption.As a result,the prepared NiCo/C aerogels have a broadband width of 6.22 GHz at 1.9 mm.Due to the presence of hydrophobic functional groups,CoNi/C aerogels improve the stability in humid environments and obtain hydrophobicity with large contact angles>140°.This multifunctional aerogel has promising applications in electromagnetic wave absorption,resistance to water or humid environments.展开更多
In this study,a green and pollution-free multifunctional superhydrophobic paper-based material was prepared using a simple and efficient dipping method.The superhydrophobic paper with a water contact angle(WCA)of 160&...In this study,a green and pollution-free multifunctional superhydrophobic paper-based material was prepared using a simple and efficient dipping method.The superhydrophobic paper with a water contact angle(WCA)of 160°was prepared by attaching micro-and nanocomposite particles,made of stearic acid-modified chitosan and two kinds of titanium dioxide(TiO_(2))nanoparticles of different sizes,to a paper substrate.The surface morphology,elemental composition,and wetting properties of the coatings were examined using scanning electron microscopy(SEM),X-ray photoelectron spectroscopy(XPS),Fourier transform infrared spectroscopy(FT-IR),and contact angle measurements.Additionally,superhydrophobic coatings exhibited good self-cleaning properties,liquid repellency,ease of repair,and antifouling properties in organic solutions.展开更多
In the wake of ever-increasing environmental pollution, human skin in the modern urban world is exposed to increased levels of harmful environmental pollutants. Many studies have shown that these pollutants can weaken...In the wake of ever-increasing environmental pollution, human skin in the modern urban world is exposed to increased levels of harmful environmental pollutants. Many studies have shown that these pollutants can weaken the epidermal skin barrier and thus facilitate the penetration of these substances into the skin. An important goal of modern skin care against harmful environmental influences should therefore be to protect and strengthen the epidermal barrier and to repair occurring damage quickly and efficiently. With this in mind, in the present study we investigated what damage cigarette smoke causes to the epidermal barrier and 1) whether the regular application of a O/W emulsion (Day Cream) can protectively strengthen the epidermal barrier against environmental damage and 2) whether a cigarette smoke-induced disruption of the epidermal barrier is restored faster and better by the regular application of a another O/W emulsion (Night Cream) than in product-untreated skin. The two products are slightly different in plant-oil, active ingredient composition and texture. Firstly, the study has shown that the Lipbarvis<sup>?</sup> method is suitable for measuring the effect of cigarette smoke, in contrast to conventional biophysical measurement methods (transepidermal water loss, skin hydration). Secondly, both products were able to improve skin barrier function in the corresponding test scenario. This was demonstrated for both test products by a significantly reduced TEWL, significantly increased skin hydration and significantly improved length of the lipid lamellae in the intercellular space, as well as the protective effect of the day cream on the epidermal skin barrier and the regenerative properties of the tested night cream. .展开更多
Magnesium alloys with superhydrophobicity are constructed by controlling rough surface structure and grafting long hydrophobic alkyl chains. Changes of morphology, phase structure, chemical composition as well as wett...Magnesium alloys with superhydrophobicity are constructed by controlling rough surface structure and grafting long hydrophobic alkyl chains. Changes of morphology, phase structure, chemical composition as well as wettability, corrosion resistance of superhydrophobic magnesium alloy upon immersing in corrosive media are investigated comparatively. Meanwhile, the contaminating particles on as-prepared superhydrophobic surfaces can be taken away easily by rolling water droplets. Therefore, the results show that as-prepared superhydrophobic magnesium alloys exhibit enhanced corrosion resistance and self-healing performance. Finally, anti-corrosion and self-cleaning mechanisms are deduced. It can be concluded that it is an effective strategy of preparing superhydrophobic surfaces for improving the corrosion resistance and selfcleaning performance of magnesium alloys.展开更多
The self-cleaning glass coated with Fe3+-TiO2 photocatalytic thin film was prepared by sol-gel process from the system Ti(OC4H9)4-NH(C2H4OH)2-C2H5OH-H2O containing FeCl3. The microstructure and properties of the f...The self-cleaning glass coated with Fe3+-TiO2 photocatalytic thin film was prepared by sol-gel process from the system Ti(OC4H9)4-NH(C2H4OH)2-C2H5OH-H2O containing FeCl3. The microstructure and properties of the film were studied using differential thermal analysis-thermogravimetry(DTA-TG), X-ray diffration(XRD) and scanning electron microscope(SEM). The transmittance of the self-cleaning glass was measured by using UV-Vis spectrometer. The effects of content of Fe3+ and the thickness of Fe3+-TiO2 thin film on the photocatalytic activity were examined. The results show that the photocatalytic thin films are mainly composed of Fe3O4 and TiO2 particles within 10100 nm. The appropriate amount of Fe3+ is effective for improving the photocatalytic activities of TiO2. The best photocatalytic activity is obtained when the molar ratio of Fe3+ to TiO2 is 0.005 and the glass is coated with 9 layers.展开更多
In this work, a simple method was carried out to successfully fabricate superoleophilic and superhydrophobic N-dodecyltrimethoxysilane@tungsten trioxide coated copper mesh. The as-fabricated copper mesh displayed prom...In this work, a simple method was carried out to successfully fabricate superoleophilic and superhydrophobic N-dodecyltrimethoxysilane@tungsten trioxide coated copper mesh. The as-fabricated copper mesh displayed prominent superoleophilicity and superhydrophobicity with a huge water contact angle about 154.39° and oil contact angle near 0° Moreover, the coated copper mesh showed high separation efficiency approximately 99.3%, and huge water flux about 9962.3 L·h^-1·m-2, which could be used to separate various organic solvents/ water mixtures. Furthermore, the coated copper mesh showed favorable stability that the separation efficiency remained above 90% after 10 separation cycles. Benefiting from the excellent photocatalytic degradation ability of tungsten trioxide, the coated copper mesh possessed the self-cleaning capacity. Therefore, the mesh contaminated with lubricating oil could regain superhydrophobic property, and this property of self-cleaning permitted that the fabricated copper mesh could be repeatedly used for oil and water separation.展开更多
In this study, vanadium doped TiO2 thin films were deposited on glass substrates using a sol-gel dip-coating process. X-Ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR) and UV-Vis spectrophotomete...In this study, vanadium doped TiO2 thin films were deposited on glass substrates using a sol-gel dip-coating process. X-Ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR) and UV-Vis spectrophotometer were used to characterize the structural, chemical and the optical properties of the thin films. The photo-catalytic activities of films were investigated by methylene blue degradation. Water contact angle on the film surfaces was measured by a water contact angle analyzer. The results indicated that vanadium doping had a significant effect on the self-cleaning properties of TiO2 thin films.展开更多
Based on the literature review of environmental anti-pollution researches, this paper analyzes the administra- tive mechanism of Huaihe River anti-pollution with game theory. Based on the quantitative analysis on thre...Based on the literature review of environmental anti-pollution researches, this paper analyzes the administra- tive mechanism of Huaihe River anti-pollution with game theory. Based on the quantitative analysis on three correspond- ing game models with four players including local residents, enterprises, local governments and competent authorities at higher levels, this paper demonstrates four main shortcomings of current administrative mechanism of Huaihe River anti-pollution system, including low emission cost, low connivance cost, overemphasis on heavy fine of the enterprises, neglect of the punishment on the local departments and intersected administrative mechanism. This paper sets up anti- pollution administrative mechanism, combining economic method with noneconomic method, government control with market mechanism, and introducing public participation. At last, this paper proposes policies, such as implementing emissions trading system, reforming public participation system, and reforming government’s environmental protection mechanism to promote law enforcement.展开更多
A superhydrophobic aluminum sheet is fabricated via a hot water immersing process and subsequently surface modification with heptadecafluorodecyltrimethoxy-silane (HTMS). As revealed by the scan electron microscopy ...A superhydrophobic aluminum sheet is fabricated via a hot water immersing process and subsequently surface modification with heptadecafluorodecyltrimethoxy-silane (HTMS). As revealed by the scan electron microscopy (SEM), X-ray diffraction (XRD), and Fourier-transform infrared spectrophotometer (FTIR) results, a rough pseudoboehmite film is formed on the aluminum sheet, and HTMS molecules are grafted on the film surface successfully. These two factors make the treated aluminum sheet present superhydrophobicity with a water contact angle larger than 160° and sliding angle less than 5°, and possess a self-cleaning property. Furthermore, the flexible superhydrophobic aluminum sheet could be pasted to a cylinder surface without destroying its superhydrophobicity. At the end, the effect of hot water treatment time on superhydrophobicity is investigated.展开更多
Self-cleaning surfaces have received a great deal of attention recently,both in theoretical studies and commercial applications.The self-cleaning surface of lotus leaf is hydrophobic and rough,showing a micro-and nano...Self-cleaning surfaces have received a great deal of attention recently,both in theoretical studies and commercial applications.The self-cleaning surface of lotus leaf is hydrophobic and rough,showing a micro-and nano-scale morphology.The micro-reliefs of lotus leaf were mimicked using polyvinylidene fluoride(PVDF)film and nano-scale peaks on the top of the micro-reliefs were implemented by the reaction between methyltrichlorosilane and the reactive groups of PVDF film treated by oxygen plasma.A lotus-leaf-like surface of the PVDF film was clearly observed by scanning electronic microscopy(SEM)and atomic force microscope(AFM).Elemental composition analysis by X-ray photoelectron spectroscopy(XPS)revealed that the material of the nanostructure of PVDF film was polymethylsiloxane.The superhydrophobic property of the mimicked self-cleaning surface was validated by the water contact angle and sliding angle on the lotus-leaf-like PVDF film,which were 156.6° and 4°,respectively.In this case,water droplets can easily move across the PVDF film surface,carrying dirt particles away,leaving no contamination.展开更多
A type of self-cleaning pre-coated steel sheet with excellent self-cleaning performance was developed using hydrophilic surface treatment technology. To understand the self-cleaning properties of this pre-coated steel...A type of self-cleaning pre-coated steel sheet with excellent self-cleaning performance was developed using hydrophilic surface treatment technology. To understand the self-cleaning properties of this pre-coated steel sheet in an industrial environment, the Jiangjin natural environmental test station was chosen as the outdoor exposure test to be conducted, and the self-cleaning performance of the steel sheet was studied by measuring the water contact angle, stain resistance factor, color difference, and gloss of the steel sheet during the outdoor exposure test. The water contact angle of the self-cleaning steel sheet quickly decreased from 84° to 29° during the outdoor exposure test, and the steel sheet showed excellent hydrophilic properties, which were beneficial to the spread of rain drops and detrimental to the accumulation of the surface pollutants. After an outdoor exposure of 12 months,the self-cleaning steel sheet had a higher stain resistance and cleaner surface than the comparison sample sheet, demonstrating its excellent self-cleaning properties. Moreover, the color difference and gloss rate of the self-cleaning steel 'sheet were similar to those of the pre-coated steel sheet without hydrophilic surface treatment. Therefore, the hydrophilic surface treatment technology used in this study did not affect the anti-aging property of the self-cleaning steel sheet.展开更多
Finishing using TiO2-nanosol treatment of cellulose acetate (CA) fabrics before and after the latter were pretreated with H2O2was undertaken with a view to impart unique properties to CA fabrics, notably, self-cleanin...Finishing using TiO2-nanosol treatment of cellulose acetate (CA) fabrics before and after the latter were pretreated with H2O2was undertaken with a view to impart unique properties to CA fabrics, notably, self-cleaning. Finishing was performed as per the pad-dry-cure method. The finishing treatment involved dispersing the nano-sized TiO2particles in a mixture of water and ethylene glycol (1:1) and application of the dispersions to CA fabrics was made under a variety of conditions. Self cleaning ability of the fabrics is favored by 1) increasing the concentration of TiO2-nanosol to certain limit;2) prolongation of curing time up to 15 second;3) raising the microwave power from 80% to 100% but with the certainty that power of 90% is the most proper. Besides, exposure time-to UV radiation-up to 90 minutes is essential to have remarkable self cleaning properties while keeping other technical properties, namely, strength, roughness and wettability practically unaltered. Incorporation of binder in the finishing pad-bath helps stabilizing the deposition of TiO2 with excellent self-cleaning. Pretreatment of CA fabrics with H2O2 is a pre requisite to guarantee excellent self-cleaning ability. Thermofixation and microwave fixation produces fabrics with very comparable technical properties.展开更多
Self-cleaning coatings for tunnels can effectively remove dust and stains accumulated over the surface of tunnel linings and their appurtenances due to the closed environment and poor ventilation.This paper systematic...Self-cleaning coatings for tunnels can effectively remove dust and stains accumulated over the surface of tunnel linings and their appurtenances due to the closed environment and poor ventilation.This paper systematically introduces the current research status of self-cleaning coatings for tunnels,focusing on the development of super-hydrophobic self-cleaning coatings,superamphiphobic self-cleaning coatings,exhaust gas degradation coatings,fire retardant coatings,and tunnel de-icing coatings.The advantages and disadvantages of the five functional coatings are then briefly described,and the problems of self-cleaning coatings for tunnels at the present stage are pointed out.Finally,the development direction of self-cleaning coatings for tunnels is proposed to provide a reference for the research and application of self-cleaning coatings for tunnels.展开更多
WHILE some Chinese people hailed the news that an informal economic leaders' meeting at the 2014 Asia-Pacific Economic Cooperation (APEC) fo- rum would be held near Beijing's Yanqi Lake. many others worried whethe...WHILE some Chinese people hailed the news that an informal economic leaders' meeting at the 2014 Asia-Pacific Economic Cooperation (APEC) fo- rum would be held near Beijing's Yanqi Lake. many others worried whether or not these state leaders would have the courage to come to Beijing in autumn, when seri- ous air pollution might engulf the city and its surrounding regions.展开更多
To adapt the practical demand,designing and constructing the multifunctional microwave absorbers(MAs)is the key future direction of research and development.However,effective integrating the multiple functions into a ...To adapt the practical demand,designing and constructing the multifunctional microwave absorbers(MAs)is the key future direction of research and development.However,effective integrating the multiple functions into a single material remains a huge challenge.Herein,cellular carbon foams(CCFs)with different porous structures were elaborately designed and fabricated in high efficiency through a facile continuous freeze-drying and carbonization processes using a sustainable biomass chitosan as the precursor.The obtained results revealed that the thermal treated temperature and g-C_(3)N_(4) amount played a great impact on the carbonization degrees,pore sizes,and morphologies of CCFs,which led to their tunable electromagnetic(EM)parameters,improved conduction loss,and polarization loss abilities.Owing to the special cellular structure,the designed CCFs samples simultaneously displayed the strong absorption capabilities,broad absorption bandwidths,and thin matching thicknesses.Meanwhile,the as-prepared CCFs exhibited the strong hydrophobicity and good thermal insulation,endowing its attractive functions of self-cleaning and thermal insulation.Therefore,our findings not only presented a facile approach to produce different porous structures of CCFs,but also provided an effective strategy to develop multifunctional high-performance MAs on basis of three-dimensional CCFs.展开更多
In order to suppressing the particle deposition on vortex finder,a series of gas cyclones with the secondary swirling clean gas were developed inspired by the gas purge effect.Effects of the width and extension length...In order to suppressing the particle deposition on vortex finder,a series of gas cyclones with the secondary swirling clean gas were developed inspired by the gas purge effect.Effects of the width and extension length of the flow channel as well as the secondary inlet velocity and running time on the particle deposition pattern,the deposited particle mass and the cyclones'performance were experimentally investigated,respectively.The results show that the ultrafine particles(Stokes number Stk<0.0358)are mainly loose deposited on the walls under the secondary gas.Compare to the conventional cyclone with single tangential inlet,the total deposited particle mass of the improved cyclone has a maximum reduction more than 60%,and the collecting efficiency is increased up to 97.5%under the basically same pressure drop.The corresponding no-deposition area is increased by about 13%,and remains constant in spite of extending the running time.Moreover,an interesting phenomenon named"self-cleaning effect"of the vortex finder was captured for the gas cyclones,and mechanism of the secondary clean gas on the particle deposition is preliminarily analyzed.The results can deepen the understanding of the particle deposition on the vortex finder and guide the design of the anti-coking gas cyclones.展开更多
The occurrence of ultrafiltration(UF)membrane fouling frequently hampers the sustainable advancement of UF technology.Reactive self-cleaning UF membranes can effectively alleviate the problem of membrane fouling.Never...The occurrence of ultrafiltration(UF)membrane fouling frequently hampers the sustainable advancement of UF technology.Reactive self-cleaning UF membranes can effectively alleviate the problem of membrane fouling.Nevertheless,the self-cleaning process may accelerate membrane aging.Addressing these concerns,we present an innovative design concept for composite self-healing materials based on self-cleaning UF membranes.To begin,TiO_(2)nanoparticles were incorporated into the polymer molecular structure via molecular design,resulting in the synthesis of TiO_(2)/carboxyl-polyether sulfone(PES)hybrid materials.Subsequently,the nonsolvent-induced phase inversion technique was employed to prepare a novel of UF membrane.Lastly,a polyvinyl alcohol(PVA)hydrogel coating was applied to the hybrid UF membrane surface to create PVA@TiO_(2)/carboxyl-PES self-healing reactive UF membranes.By establishing a covalent bond,the TiO_(2)nanoparticles were effectively and uniformly dispersed within the UF membrane,leading to exceptional self-cleaning properties.Furthermore,the water-absorbing and swelling properties of PVA hydrogel,along with its capacity to form hydrogen bonds with water molecules,resulted in UF membranes with improved hydrophilicity and active self-healing abilities.The results demonstrated that the water contact angle of PVA@5%TiO_(2)/carboxyl-PES UF membrane was 43.1°.Following a 1-h exposure to simulated solar exposure,the water flux recovery ratio increased from 48.16%to 81.03%.Moreover,even after undergoing five cycles of 12-h simulated sunlight exposure,the UF membranes exhibited a consistent retention rate of over 97%,thus fully demonstrating their exceptional self-cleaning,antifouling,and selfhealing capabilities.We anticipate that the self-healing reactive UF membrane system will serve as a pioneering and comprehensive solution for the self-cleaning antifouling challenges encountered in UF membranes while also effectively mitigating the aging effects of reactive UF membranes.展开更多
It is urgent to develop low-reflection electromagnetic interference shielding material to shield electromagnetic waves(EMW)and reduce their secondary radiation pollution.Herein,an electromagnetic interference shieldin...It is urgent to develop low-reflection electromagnetic interference shielding material to shield electromagnetic waves(EMW)and reduce their secondary radiation pollution.Herein,an electromagnetic interference shielding nanofiber film is composed of ZnO and carbon nanofiber(CNF)via electrospinning and carbonization approachs,and subsequently coating perfuorooctyltriethoxysilane as a protective layer.On the one hand,ZnO coated by porous carbon,which is derived from ZIF-8,endows the nanofiber film low reflection property through optimizing impedance matching between free space and the nanofiber film.On the other hand,the nanofiber film possesses high electromagnetic interference shielding efficiency,which is beneficial by excellent electrical conductivity of CNF derived from waste leather scraps.Furthermore,the nanofiber film involves abundant interface,which contributes to high interfacial polarization loss.Thus,the nanofiber film with a thickness of 250 pm has electrical conductivity of 53 S/m and shielding efficiency of 50 dB.The reflection coefficient of the nanofiber film is inferior to 0.4 indicates that most of EMW are absorbed inside the materials and the nanofiber film is effective in reducing secondary radiation contamination of electromagnetic waves.Fortunately,the nanofiber film exhibits outstanding solar harvesting performance(106℃at 1 sun density)and good self-cleaning performance,which ensure that the nanofiber film can work in harsh environments.This work supplies a credible reference for fabricating low-reflection electromagnetic shielding nanofiber film to reduce secondary radiation pollution and facilitates the upcycling of waste leather scraps.展开更多
This paper concentrates on the development of glasses with self-cleaning surfaces exhibiting high water contact angles. In this study, we prepared super-hydrophobic nano-ceramic coated glass based on titania & sil...This paper concentrates on the development of glasses with self-cleaning surfaces exhibiting high water contact angles. In this study, we prepared super-hydrophobic nano-ceramic coated glass based on titania & silica using simple sol-gel & dip coating methods and studied the best composition of the coatings by altering ratios of titanium tetraisopropoxide (TTIP)/tetraethyl orthosilicate (TEOS) with different homogenizing agents. We characterized the coatings by surface roughness measurement, percentage of optical transmission, static contact angle, near-infrared (NIR) transmission, and diffuse reflectance. The fabrication of coatings on glass substrates played an important role in increasing the water contact angle of about 95° and visible & NIR transmission of about 90%. We compared our modified glass substrate with commercial low emissivity (Low E) glass using X-ray diffraction (XRD) analysis, which showed pure amorphous surface claiming excellent wettability and thus the prepared glass substrate could have a variety of applications in different fields.展开更多
基金financially supported by the National Natural Science Foundation of China (No.51407134, No.52002196)Natural Science Foundation of Shandong Province (No.ZR2019YQ24, No.ZR2020QF084)+2 种基金Taishan Scholars and Young Experts Program of Shandong Province (No.tsqn202103057)the Qingchuang Talents Induction Program of Shandong Higher Education Institution (Research and Innovation Team of Structural-Functional Polymer Composites)Special Financial of Shandong Province (Structural Design of Highefficiency Electromagnetic Wave-absorbing Composite Materials and Construction of Shandong Provincial Talent Teams (No. 37000022P990304116449))
文摘Although multifunctional aerogels are expected to be used in applications such as portable electronic devices,it is still a great challenge to confer multifunctionality to aerogels while maintaining their inherent microstructure.Herein,a simple method is proposed to prepare multifunctional NiCo/C aerogels with excellent electromagnetic wave absorption properties,superhydrophobicity,and self-cleaning by water-induced NiCo-MOF self-assembly.Specifically,the impedance matching of the three-dimensional(3D)structure and the interfacial polarization provided by CoNi/C as well as the defect-induced dipole polarization are the primary contributors to the broadband absorption.As a result,the prepared NiCo/C aerogels have a broadband width of 6.22 GHz at 1.9 mm.Due to the presence of hydrophobic functional groups,CoNi/C aerogels improve the stability in humid environments and obtain hydrophobicity with large contact angles>140°.This multifunctional aerogel has promising applications in electromagnetic wave absorption,resistance to water or humid environments.
基金the financial support from the Key Research and Development Project of Shandong Province (2019GHY112040)National Natural Science Foundation of China (22078167)+4 种基金Youth Innovative Team Development Plan of Colleges and Universities in Shandong Province (2019KJC008)Shandong Province Major Innovation Project (2018CXGC1001)Foundation (No. XWZR201901) of the State Key Laboratory of Bio-based Material and Green Papermaking, Qilu University of TechnologyMajor Innovation Project of Qingdao West Coast (2019-27)Shandong Province Key Supporting Areas for Introducing Urgently Needed and Shortage of Talents Project-Key Technology Research and Development and Industrialization of Highly Water-Resistant Biomass-Based Materials。
文摘In this study,a green and pollution-free multifunctional superhydrophobic paper-based material was prepared using a simple and efficient dipping method.The superhydrophobic paper with a water contact angle(WCA)of 160°was prepared by attaching micro-and nanocomposite particles,made of stearic acid-modified chitosan and two kinds of titanium dioxide(TiO_(2))nanoparticles of different sizes,to a paper substrate.The surface morphology,elemental composition,and wetting properties of the coatings were examined using scanning electron microscopy(SEM),X-ray photoelectron spectroscopy(XPS),Fourier transform infrared spectroscopy(FT-IR),and contact angle measurements.Additionally,superhydrophobic coatings exhibited good self-cleaning properties,liquid repellency,ease of repair,and antifouling properties in organic solutions.
文摘In the wake of ever-increasing environmental pollution, human skin in the modern urban world is exposed to increased levels of harmful environmental pollutants. Many studies have shown that these pollutants can weaken the epidermal skin barrier and thus facilitate the penetration of these substances into the skin. An important goal of modern skin care against harmful environmental influences should therefore be to protect and strengthen the epidermal barrier and to repair occurring damage quickly and efficiently. With this in mind, in the present study we investigated what damage cigarette smoke causes to the epidermal barrier and 1) whether the regular application of a O/W emulsion (Day Cream) can protectively strengthen the epidermal barrier against environmental damage and 2) whether a cigarette smoke-induced disruption of the epidermal barrier is restored faster and better by the regular application of a another O/W emulsion (Night Cream) than in product-untreated skin. The two products are slightly different in plant-oil, active ingredient composition and texture. Firstly, the study has shown that the Lipbarvis<sup>?</sup> method is suitable for measuring the effect of cigarette smoke, in contrast to conventional biophysical measurement methods (transepidermal water loss, skin hydration). Secondly, both products were able to improve skin barrier function in the corresponding test scenario. This was demonstrated for both test products by a significantly reduced TEWL, significantly increased skin hydration and significantly improved length of the lipid lamellae in the intercellular space, as well as the protective effect of the day cream on the epidermal skin barrier and the regenerative properties of the tested night cream. .
基金Funded by the National Natural Science Foundation of China(No.21161012)
文摘Magnesium alloys with superhydrophobicity are constructed by controlling rough surface structure and grafting long hydrophobic alkyl chains. Changes of morphology, phase structure, chemical composition as well as wettability, corrosion resistance of superhydrophobic magnesium alloy upon immersing in corrosive media are investigated comparatively. Meanwhile, the contaminating particles on as-prepared superhydrophobic surfaces can be taken away easily by rolling water droplets. Therefore, the results show that as-prepared superhydrophobic magnesium alloys exhibit enhanced corrosion resistance and self-healing performance. Finally, anti-corrosion and self-cleaning mechanisms are deduced. It can be concluded that it is an effective strategy of preparing superhydrophobic surfaces for improving the corrosion resistance and selfcleaning performance of magnesium alloys.
文摘The self-cleaning glass coated with Fe3+-TiO2 photocatalytic thin film was prepared by sol-gel process from the system Ti(OC4H9)4-NH(C2H4OH)2-C2H5OH-H2O containing FeCl3. The microstructure and properties of the film were studied using differential thermal analysis-thermogravimetry(DTA-TG), X-ray diffration(XRD) and scanning electron microscope(SEM). The transmittance of the self-cleaning glass was measured by using UV-Vis spectrometer. The effects of content of Fe3+ and the thickness of Fe3+-TiO2 thin film on the photocatalytic activity were examined. The results show that the photocatalytic thin films are mainly composed of Fe3O4 and TiO2 particles within 10100 nm. The appropriate amount of Fe3+ is effective for improving the photocatalytic activities of TiO2. The best photocatalytic activity is obtained when the molar ratio of Fe3+ to TiO2 is 0.005 and the glass is coated with 9 layers.
基金the National Natural Science Foundation of China(No.21776319 and No.21476269).
文摘In this work, a simple method was carried out to successfully fabricate superoleophilic and superhydrophobic N-dodecyltrimethoxysilane@tungsten trioxide coated copper mesh. The as-fabricated copper mesh displayed prominent superoleophilicity and superhydrophobicity with a huge water contact angle about 154.39° and oil contact angle near 0° Moreover, the coated copper mesh showed high separation efficiency approximately 99.3%, and huge water flux about 9962.3 L·h^-1·m-2, which could be used to separate various organic solvents/ water mixtures. Furthermore, the coated copper mesh showed favorable stability that the separation efficiency remained above 90% after 10 separation cycles. Benefiting from the excellent photocatalytic degradation ability of tungsten trioxide, the coated copper mesh possessed the self-cleaning capacity. Therefore, the mesh contaminated with lubricating oil could regain superhydrophobic property, and this property of self-cleaning permitted that the fabricated copper mesh could be repeatedly used for oil and water separation.
文摘In this study, vanadium doped TiO2 thin films were deposited on glass substrates using a sol-gel dip-coating process. X-Ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR) and UV-Vis spectrophotometer were used to characterize the structural, chemical and the optical properties of the thin films. The photo-catalytic activities of films were investigated by methylene blue degradation. Water contact angle on the film surfaces was measured by a water contact angle analyzer. The results indicated that vanadium doping had a significant effect on the self-cleaning properties of TiO2 thin films.
文摘Based on the literature review of environmental anti-pollution researches, this paper analyzes the administra- tive mechanism of Huaihe River anti-pollution with game theory. Based on the quantitative analysis on three correspond- ing game models with four players including local residents, enterprises, local governments and competent authorities at higher levels, this paper demonstrates four main shortcomings of current administrative mechanism of Huaihe River anti-pollution system, including low emission cost, low connivance cost, overemphasis on heavy fine of the enterprises, neglect of the punishment on the local departments and intersected administrative mechanism. This paper sets up anti- pollution administrative mechanism, combining economic method with noneconomic method, government control with market mechanism, and introducing public participation. At last, this paper proposes policies, such as implementing emissions trading system, reforming public participation system, and reforming government’s environmental protection mechanism to promote law enforcement.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.78872129 and 81172082)
文摘A superhydrophobic aluminum sheet is fabricated via a hot water immersing process and subsequently surface modification with heptadecafluorodecyltrimethoxy-silane (HTMS). As revealed by the scan electron microscopy (SEM), X-ray diffraction (XRD), and Fourier-transform infrared spectrophotometer (FTIR) results, a rough pseudoboehmite film is formed on the aluminum sheet, and HTMS molecules are grafted on the film surface successfully. These two factors make the treated aluminum sheet present superhydrophobicity with a water contact angle larger than 160° and sliding angle less than 5°, and possess a self-cleaning property. Furthermore, the flexible superhydrophobic aluminum sheet could be pasted to a cylinder surface without destroying its superhydrophobicity. At the end, the effect of hot water treatment time on superhydrophobicity is investigated.
基金Tianjin Municipal Science and Technology Commission,China(No.06YFJZJC14802)
文摘Self-cleaning surfaces have received a great deal of attention recently,both in theoretical studies and commercial applications.The self-cleaning surface of lotus leaf is hydrophobic and rough,showing a micro-and nano-scale morphology.The micro-reliefs of lotus leaf were mimicked using polyvinylidene fluoride(PVDF)film and nano-scale peaks on the top of the micro-reliefs were implemented by the reaction between methyltrichlorosilane and the reactive groups of PVDF film treated by oxygen plasma.A lotus-leaf-like surface of the PVDF film was clearly observed by scanning electronic microscopy(SEM)and atomic force microscope(AFM).Elemental composition analysis by X-ray photoelectron spectroscopy(XPS)revealed that the material of the nanostructure of PVDF film was polymethylsiloxane.The superhydrophobic property of the mimicked self-cleaning surface was validated by the water contact angle and sliding angle on the lotus-leaf-like PVDF film,which were 156.6° and 4°,respectively.In this case,water droplets can easily move across the PVDF film surface,carrying dirt particles away,leaving no contamination.
文摘A type of self-cleaning pre-coated steel sheet with excellent self-cleaning performance was developed using hydrophilic surface treatment technology. To understand the self-cleaning properties of this pre-coated steel sheet in an industrial environment, the Jiangjin natural environmental test station was chosen as the outdoor exposure test to be conducted, and the self-cleaning performance of the steel sheet was studied by measuring the water contact angle, stain resistance factor, color difference, and gloss of the steel sheet during the outdoor exposure test. The water contact angle of the self-cleaning steel sheet quickly decreased from 84° to 29° during the outdoor exposure test, and the steel sheet showed excellent hydrophilic properties, which were beneficial to the spread of rain drops and detrimental to the accumulation of the surface pollutants. After an outdoor exposure of 12 months,the self-cleaning steel sheet had a higher stain resistance and cleaner surface than the comparison sample sheet, demonstrating its excellent self-cleaning properties. Moreover, the color difference and gloss rate of the self-cleaning steel 'sheet were similar to those of the pre-coated steel sheet without hydrophilic surface treatment. Therefore, the hydrophilic surface treatment technology used in this study did not affect the anti-aging property of the self-cleaning steel sheet.
文摘Finishing using TiO2-nanosol treatment of cellulose acetate (CA) fabrics before and after the latter were pretreated with H2O2was undertaken with a view to impart unique properties to CA fabrics, notably, self-cleaning. Finishing was performed as per the pad-dry-cure method. The finishing treatment involved dispersing the nano-sized TiO2particles in a mixture of water and ethylene glycol (1:1) and application of the dispersions to CA fabrics was made under a variety of conditions. Self cleaning ability of the fabrics is favored by 1) increasing the concentration of TiO2-nanosol to certain limit;2) prolongation of curing time up to 15 second;3) raising the microwave power from 80% to 100% but with the certainty that power of 90% is the most proper. Besides, exposure time-to UV radiation-up to 90 minutes is essential to have remarkable self cleaning properties while keeping other technical properties, namely, strength, roughness and wettability practically unaltered. Incorporation of binder in the finishing pad-bath helps stabilizing the deposition of TiO2 with excellent self-cleaning. Pretreatment of CA fabrics with H2O2 is a pre requisite to guarantee excellent self-cleaning ability. Thermofixation and microwave fixation produces fabrics with very comparable technical properties.
基金financially supported by National Key R&D Program of China(2018YFB1600101).
文摘Self-cleaning coatings for tunnels can effectively remove dust and stains accumulated over the surface of tunnel linings and their appurtenances due to the closed environment and poor ventilation.This paper systematically introduces the current research status of self-cleaning coatings for tunnels,focusing on the development of super-hydrophobic self-cleaning coatings,superamphiphobic self-cleaning coatings,exhaust gas degradation coatings,fire retardant coatings,and tunnel de-icing coatings.The advantages and disadvantages of the five functional coatings are then briefly described,and the problems of self-cleaning coatings for tunnels at the present stage are pointed out.Finally,the development direction of self-cleaning coatings for tunnels is proposed to provide a reference for the research and application of self-cleaning coatings for tunnels.
文摘WHILE some Chinese people hailed the news that an informal economic leaders' meeting at the 2014 Asia-Pacific Economic Cooperation (APEC) fo- rum would be held near Beijing's Yanqi Lake. many others worried whether or not these state leaders would have the courage to come to Beijing in autumn, when seri- ous air pollution might engulf the city and its surrounding regions.
基金supported by the Platform of Science and Technology and Talent Team Plan of Guizhou province(No.GCC[2023]007)the Doctorial Start-up Fund of Guizhou University(No.2011-05)+3 种基金the Fok Ying Tung Education Foundation(No.171095)the Talent Project of Guizhou Provincial Education Department(No.2022-094)the Guizhou Provincial Science and Technology Projects(No.ZK 2022-General 044)the National Natural Science Foundation of China(No.11964006).
文摘To adapt the practical demand,designing and constructing the multifunctional microwave absorbers(MAs)is the key future direction of research and development.However,effective integrating the multiple functions into a single material remains a huge challenge.Herein,cellular carbon foams(CCFs)with different porous structures were elaborately designed and fabricated in high efficiency through a facile continuous freeze-drying and carbonization processes using a sustainable biomass chitosan as the precursor.The obtained results revealed that the thermal treated temperature and g-C_(3)N_(4) amount played a great impact on the carbonization degrees,pore sizes,and morphologies of CCFs,which led to their tunable electromagnetic(EM)parameters,improved conduction loss,and polarization loss abilities.Owing to the special cellular structure,the designed CCFs samples simultaneously displayed the strong absorption capabilities,broad absorption bandwidths,and thin matching thicknesses.Meanwhile,the as-prepared CCFs exhibited the strong hydrophobicity and good thermal insulation,endowing its attractive functions of self-cleaning and thermal insulation.Therefore,our findings not only presented a facile approach to produce different porous structures of CCFs,but also provided an effective strategy to develop multifunctional high-performance MAs on basis of three-dimensional CCFs.
基金the National Natural Science Foundation of China(grant No.51904088)Scientific Research Project of Colleges and Universities in Hebei Province(grant No.BJ2020042).
文摘In order to suppressing the particle deposition on vortex finder,a series of gas cyclones with the secondary swirling clean gas were developed inspired by the gas purge effect.Effects of the width and extension length of the flow channel as well as the secondary inlet velocity and running time on the particle deposition pattern,the deposited particle mass and the cyclones'performance were experimentally investigated,respectively.The results show that the ultrafine particles(Stokes number Stk<0.0358)are mainly loose deposited on the walls under the secondary gas.Compare to the conventional cyclone with single tangential inlet,the total deposited particle mass of the improved cyclone has a maximum reduction more than 60%,and the collecting efficiency is increased up to 97.5%under the basically same pressure drop.The corresponding no-deposition area is increased by about 13%,and remains constant in spite of extending the running time.Moreover,an interesting phenomenon named"self-cleaning effect"of the vortex finder was captured for the gas cyclones,and mechanism of the secondary clean gas on the particle deposition is preliminarily analyzed.The results can deepen the understanding of the particle deposition on the vortex finder and guide the design of the anti-coking gas cyclones.
基金supported by the National Natural Science Foundation of China(51978133,52100026,U20A20322,52170151,51978132)the Fundamental Research Funds for the Central Universities of China(2412021QD022)+1 种基金the Key Research and Development Project of Hainan Province(ZDYF2022SHFZ298)the Industrialization Cultivation Project of Jilin Provincial Department of Education(JJKH20221174CY)。
文摘The occurrence of ultrafiltration(UF)membrane fouling frequently hampers the sustainable advancement of UF technology.Reactive self-cleaning UF membranes can effectively alleviate the problem of membrane fouling.Nevertheless,the self-cleaning process may accelerate membrane aging.Addressing these concerns,we present an innovative design concept for composite self-healing materials based on self-cleaning UF membranes.To begin,TiO_(2)nanoparticles were incorporated into the polymer molecular structure via molecular design,resulting in the synthesis of TiO_(2)/carboxyl-polyether sulfone(PES)hybrid materials.Subsequently,the nonsolvent-induced phase inversion technique was employed to prepare a novel of UF membrane.Lastly,a polyvinyl alcohol(PVA)hydrogel coating was applied to the hybrid UF membrane surface to create PVA@TiO_(2)/carboxyl-PES self-healing reactive UF membranes.By establishing a covalent bond,the TiO_(2)nanoparticles were effectively and uniformly dispersed within the UF membrane,leading to exceptional self-cleaning properties.Furthermore,the water-absorbing and swelling properties of PVA hydrogel,along with its capacity to form hydrogen bonds with water molecules,resulted in UF membranes with improved hydrophilicity and active self-healing abilities.The results demonstrated that the water contact angle of PVA@5%TiO_(2)/carboxyl-PES UF membrane was 43.1°.Following a 1-h exposure to simulated solar exposure,the water flux recovery ratio increased from 48.16%to 81.03%.Moreover,even after undergoing five cycles of 12-h simulated sunlight exposure,the UF membranes exhibited a consistent retention rate of over 97%,thus fully demonstrating their exceptional self-cleaning,antifouling,and selfhealing capabilities.We anticipate that the self-healing reactive UF membrane system will serve as a pioneering and comprehensive solution for the self-cleaning antifouling challenges encountered in UF membranes while also effectively mitigating the aging effects of reactive UF membranes.
基金funded by the Shaanxi Provincial“Special Support Plan for High-level Talents”the Key Project of Natural Science Basic Research Program of Shaanxi Province(Special Support)(Program No.2023JC-XJ-12)the Innovation Capability Support Program of Shaanxi(Program No.2021TD-16).
文摘It is urgent to develop low-reflection electromagnetic interference shielding material to shield electromagnetic waves(EMW)and reduce their secondary radiation pollution.Herein,an electromagnetic interference shielding nanofiber film is composed of ZnO and carbon nanofiber(CNF)via electrospinning and carbonization approachs,and subsequently coating perfuorooctyltriethoxysilane as a protective layer.On the one hand,ZnO coated by porous carbon,which is derived from ZIF-8,endows the nanofiber film low reflection property through optimizing impedance matching between free space and the nanofiber film.On the other hand,the nanofiber film possesses high electromagnetic interference shielding efficiency,which is beneficial by excellent electrical conductivity of CNF derived from waste leather scraps.Furthermore,the nanofiber film involves abundant interface,which contributes to high interfacial polarization loss.Thus,the nanofiber film with a thickness of 250 pm has electrical conductivity of 53 S/m and shielding efficiency of 50 dB.The reflection coefficient of the nanofiber film is inferior to 0.4 indicates that most of EMW are absorbed inside the materials and the nanofiber film is effective in reducing secondary radiation contamination of electromagnetic waves.Fortunately,the nanofiber film exhibits outstanding solar harvesting performance(106℃at 1 sun density)and good self-cleaning performance,which ensure that the nanofiber film can work in harsh environments.This work supplies a credible reference for fabricating low-reflection electromagnetic shielding nanofiber film to reduce secondary radiation pollution and facilitates the upcycling of waste leather scraps.
文摘This paper concentrates on the development of glasses with self-cleaning surfaces exhibiting high water contact angles. In this study, we prepared super-hydrophobic nano-ceramic coated glass based on titania & silica using simple sol-gel & dip coating methods and studied the best composition of the coatings by altering ratios of titanium tetraisopropoxide (TTIP)/tetraethyl orthosilicate (TEOS) with different homogenizing agents. We characterized the coatings by surface roughness measurement, percentage of optical transmission, static contact angle, near-infrared (NIR) transmission, and diffuse reflectance. The fabrication of coatings on glass substrates played an important role in increasing the water contact angle of about 95° and visible & NIR transmission of about 90%. We compared our modified glass substrate with commercial low emissivity (Low E) glass using X-ray diffraction (XRD) analysis, which showed pure amorphous surface claiming excellent wettability and thus the prepared glass substrate could have a variety of applications in different fields.