Analysis of the Properties and Anti-Seepage Mechanism of PBFC Slurry in Landfill

As the landfill leachate has strong pollution on the underground water,surface water and soil.This paper develops the formula of impervious slurry with low permeability,good durability,strong adsorption and retardant based on the bentonite which is modified by polyvinyl alcohol.Through the simulation experiment,the optimum formula of polyvinyl alcohol is 0.2%.Its osmotic coefficient for 28 days is 0.53×10^-8~1.86×10^-8 cm/s and compressive strength is 0.5~1.5 MPa as well.This paper study on the retardant rule of the consolidation of slurry against the pollution in the leachate by self-made percolation instrument.The experiment shows that the retardant rate of the consolidation against inorganic pollutants and organic pollutants is over 85% and the retardant rate against heavy metal ion such as Hg and Pb is above 99%.The slurry has the characteristics of low permeability,high retardant against pollution,good durability and plasticity,no chemical additives,no pollution,wide source of raw materials and good economy which determine it can be used to new landfill or existing landfill,building foundation pit and water conservancy project.

Evaluation of Hydrocarbon Potential Using AVO Analysis in the FORMAT Field, Niger Delta Basin, Nigeria

The study involved the evaluation of the hydrocarbon potential of FORMAT Field, coastal swamp depobelt Niger delta, Nigeria to obtain a more efficient reservoir characterization and fluid properties identification. Despite advances in seismic data interpretation using traditional 3D seismic data interpretation, obtaining adequate reservoir characteristics at the finest level had proved very challenging with often disappointing results. A method that integrates the amplitude variation with offfset (AVO) analysis is hereby proposed to better illuminate the reservoir. The Hampson Russell 10.3 was used to integrate and study the available seismic and well data. The reservoir of interest was delineated using the available suite of petrophysical data. This was marked by low gamma ray, high resistivity, and low acoustic impedance between a true subsea vertical depth (TVDss) range of 10,350 - 10,450 ft. The AVO fluid substitution yielded a decrease in the density values of pure gas (2.3 - 1.6 g/cc), pure oil (2.3 - 1.8 g/cc) while the Poisson pure brine increased (2.3 to 2.8 g/cc). Result from FORMAT 26 plots yielded a negative intercept and negative gradient at the top and a positive intercept and positive gradient at the Base which conforms to Class III AVO anomaly. FORMAT 30 plots yielded a negative intercept and positive gradient at the top and a positive intercept and negative gradient at the Base which conforms to class IV AVO anomaly. AVO attribute volume slices decreased in the Poisson ratio (0.96 to - 1.0) indicating that the reservoir contains hydrocarbon. The s-wave reflectivity and the product of the intercept and gradient further clarified that there was a Class 3 gas sand in the reservoir and the possibility of a Class 4 gas sand anomaly in that same reservoir.

Loading Stress Analysis of Cement Concrete Pavement in Mountainous Areas

The suitable cement concrete pavement for mountainous areas is a form of low-cost cement concrete pavement that uses unconventional graded stones in different proportions in ordinary concrete,allowing the concrete to fully contact the stones and form a stable and well-bonded slab with large particle stones.As large particle stones replace a certain volume of cement concrete,they have good economic performance and are a low-cost form of cement concrete pavement.This study researches the use of ANSYS tools to analyze the influence of geometric dimensions and material properties of rigid pavement structural layers on the mechanical properties of pavement structures.

Application of Principal Component Analysis as Properties and Sensory Assessment Tool for Legume Milk Chocolates

Principal component analysis (PCA) was employed to examine the effect of nutritional and bioactive compounds of legume milk chocolate as well as the sensory to document the extend of variations and their significance with plant sources. PCA identified eight significant principle components, that reduce the size of the variables into one principal component in physiochemical analysis interpreting 73.5% of the total variability with/and 78.6% of total variability explained in sensory evaluation. Score plot indicates that Double Bean milk chocolate in-corporated with MOL and CML in nutritional profile have high positive correlations. In nutritional evaluation, carbohydrates and fat content shows negative/minimal correlations whereas no negative correlations were found in sensory evaluation which implies every sensorial variable had high correlation with each other.

Accuracy analysis of plane-strain bulge test for determining mechanical properties of thin films

The effect of a variety of geometrics, initial conditions and material properties on the deformation behavior of thin films in the plane-strain bulge test was systematically scrutinized by performing the finite element analysis, and then the accuracy of the plane-strain bulge test in determining the mechanical properties of thin films in terms of our finite element results was analyzed. The results indicate that although the determination of the plane-strain modulus in the light of the plane-strain bulge equation is fairly accurate, the calculation of the residual stress is not satisfied as expected, especially for low residual stress. Finally, an approach is proposed for analyzing bulge test data, which will improve the accuracy and reliability of this bulge test technique.

Tribological Properties and Failure Analysis of PTFE Composites used for Seals in the Transmission Unit

The sealing rings are one of the most important components as the sealing devices in the wet clutch unit of a heavy vehicle. The sealing ring, made from PTFE composites, was subjected to serious wear on the sealing surface, but the mating metal surface only had slight abrasion. A specialized test rig was designed for wear research and failure analysis of the sealing ring. The composition analyses of the ring material, working conditions and wear surface characteristics by visual inspection and tribological properties as well as microscopic analysis with scanning electron microscope was performed to determine the wear mechanism and failure causes. Results revealed that the wear of PTFE composites was characterized by abrasion and adhesion after a certain duration testing, and the wear mechanism changed to thermal fatigue and abrasive wear in the stage of intense wear. The thermal deformation and fatigue were primarily responsible for the rapid wear of the PTFE composites for the sealing rings.

Molecular analysis and anticancer properties of two identified isolates,Fusarium solani and Emericella nidulans isolated from Wady El-Natron soil in Egypt against Caco-2(ATCC) cell line

Objective:To characterize,identify and investigate the anticancer properties of two new soil fungal isolates,Emericella nidulansand Fusarium solani isolated from Wady El-Natron in Egypt against colon cancer Caco-2(ATCCj cell line.Methods:Soil sample was cultured and two strains were chosen for morphological and phenotypical characterization.Partial sequences of the 18s rRNA gene and the internal transcribed spacer region ITS of the two isolates were amplified by PCR.Phylogenetic tree construction and analysis of the resulted multiple sequences from the two fugal isolates were also carried out.In vitro anticancer activity of the two strains was done against colon Caco-2 cancer cell line.Reverse transcription — PCR was carried out to detect level of expression of p53 in Caco-2 cell line.Results:HF.I displayed morphological and genotypic characteristics most similar to that of Fusarium solani while HF.2 was most similar to Emericella nidulans with high similarity of 99%and 97%respectively.The multiple sequence alignment of the two fungal isolates showed that,the maximum identical conserved domains in the 18s rRNA genes were identified with the nucleotide regions of Slst to 399th base pairs,88th to 525th base pairs respectively.While those in the ITS genes were identified with the nucleotide regions of 88th to 463rd and Slst to 274th.The two isolates showed IC<sub>50 value with（6.24±5.21） and（9.84±0.36） μ g/mL) concentrations respectively at 28h.Reverse transcription- PCR indicated that these cells showed high level of expression for p53 mRNA.Conclusions:The morphology and molecular analysis identified HF.1 and HF.2 to be Fusarium solani and Emericella nidulans;new isolates of anticancer producing fungi from Wady El-Natroon city in Egypt.Treatment with the two isolates caused P53 expression in Caco-2 cell line.These two isolates can be used as an anticancer agents.

A Novel Dinuclear Copper(Ⅱ)Complex:Synthesis,Crystal Structure,Properties and Hirshfeld Surface Analysis

A novel copper complex [Cu2（L）（DMF）2]（1, H4L =（1 Z,N？Z）-3,5-dibromo-N？-（（3,5-dibromo-2-hydroxyphenyl）（hydroxy）methylene）-2-hydroxybenzohydrazonic acid which was synthesized by in-situ oxidation reaction derived from H2hdb（H2hdb = 6,6′-（（1 E,1？E）-hydrazine-1,2-diylidenebis（methanylylidene）） bis（2,4-dibromophenol）） has been synthesized and characterized by IR, elemental analysis（CHN）, TG and single-crystal X-ray diffraction. The single crystal belongs to monoclinic system, space group P21/c with a = 13.538（1）, b = 3.912（1）, c = 23.778（1）A°, β = 105.232（5）o, Mr = 857.08, V = 1214.9（1） A°^3, Z = 2, Dc = 2.343 g/cm^3, F（000） = 824, μ = 8.375 mm^–1, R = 0.0566, and w R = 0.1610. Compound 1 displays weak anti-ferromagnetic interactions through a η^1：η^1：η^1：η^1：η^1：η^1：μ2-L^4- bridging mode. Hirshfeld surface analysis revealed that complex 1 was supported mainly by Br···H and H···H intermolecular interactions.

Experimental Study and Failure Criterion Analysis of Rubber Fibre Reinforced Concrete under Biaxial Compression-Compression

In order to examine the biaxial compression-compression properties of rubber fibre reinforced concrete(RFRC),an experimental study on RFRC under different lateral compressive stresses was carried out by considering different rubber replacement rates and polypropylene fibre contents.The failure modes and mechanical property parameters of different RFRC working conditions were obtained from the experiment to explore the effects of rubber replacement rate and polypropylene fibre content on the biaxial compression-compression properties of RFRC.The following conclusions were drawn.Under the influence of lateral compressive stress,the biaxial compression-compression failure mode gradually developed from a columnar pattern to a flaky pattern,suggesting that the incorporation of rubber and polypropylene fibres into the concrete resulted in a significant change in the development of cracks.For different rubber replacement rates and polypropylene fibre contents,the vertical compressive stress exhibited the same developing trend under the influence of lateral compressive stress.Specifically,the lateral compressive stress imposed the minimum effect on the vertical compressive stress when the rubber replacement rate and polypropylene fibre content were 20%and 0.4%,respectively,and imposed the maximum effect when the rubber replacement rate and polypropylene fibre content were 20%and 0%,respectively.With the increase of rubber replacement rate,the vertical peak stress was significantly reduced,which implies that an appropriate amount of polypropylene fibres can increase the vertical peak stress to a certain extent.Then,the biaxial compression-compression mechanism of RFRC was analysed from the microscopic level by using scanning electron microscope(SEM).Meanwhile,based on Kupfer’s biaxial compression-compression failure criterion and the octahedral stress space,a biaxial compression-compression failure criterion for RFRC was proposed,which was proven to have good applicability.The research results of this study provide important theoretical basis for the engineering application and development of RFRC.

Multiscale Nonlinear Thermo-Mechanical Coupling Analysis of Composite Structures with Quasi-Periodic Properties

This paper reports a multiscale analysis method to predict the thermomechanical coupling performance of composite structures with quasi-periodic properties.In these material structures,the configurations are periodic,and the material coefficients are quasi-periodic,i.e.,they depend not only on the microscale information but also on the macro location.Also,a mutual interaction between displacement and temperature fields is considered in the problem,which is our particular interest in this study.The multiscale asymptotic expansions of the temperature and displacement fields are constructed and associated error estimation in nearly pointwise sense is presented.Then,a finite element-difference algorithm based on the multiscale analysis method is brought forward in detail.Finally,some numerical examples are given.And the numerical results show that the multiscale method presented in this paper is effective and reliable to study the nonlinear thermo-mechanical coupling problem of composite structures with quasiperiodic properties.

Analysis of the elastic-plastic indentation properties of materials with varying ratio of hardness to Young’s modulus

The elastic-plastic indentation properties of materials with varying ratio of hardness to Young’s modulus(H/E) were analyzed with the finite element method. And the indentation stress fields of materials with varying ratio H/E on the surface were studied by the experiment. The results show that the penetration depth, contact radius, plastic pile-up and the degree of elastic recovery depend strongly on the ratio H/E. Moreover, graphs were established to describe the relationship between the elastic-plastic indentation parameters and H/E. The established graphs can be used to predict the H/E of materials when compared with experimental data.

Analysis of Mechanical Properties of Injection Molded Short Glass Fibre (SGF)/Calcite/ABS Composites

Acrylonitrile-butadiene-Styrene (ABS), with and without calcium carbonate (calcite) particles,was used as the matrix for reinforcement with as-received short-glass fibres (were originallytreated by the manufacturer) and sized short-glass fibres with two amino-silane coupling agents.The calcite particle content is 0, 11.7 and 23.5 vol. pct for the matrices. The glass fiber contentis 0, 10 and 15 vol. pct. The matrix materials and corresponding composites were compoundedusing a twin screw extruder and dumbbell-shaped tensile bars were prepared with an injectionmolding process. The tensile and flexural properties as well as the unnotched and notchedCharpy impact energies of short glass fibre/calcite/ABS composites were studied in this paper.The effects of fibres, fibre surface treatments and particles on these mechanical properties ofthe composites were discussed in detail. An importarit information was obtained, which is thatthe tensile and flexural strengths of hybrid SGF/calcite/ABS composites are the same as thoseof corresponding fibre composites when the ratio of the interfacial adhesion strength betweenparticles and matrix to that between fibres and matrix is higher than certain value. otherwise theformer are lower than the latter.

Property analysis of bistatic forward-looking SAR with arbitrary geometry

Bistatic forward-looking synthetic aperture radar（SAR） has many advantages and applications owing to its twodimensional imaging capability.There could be various imaging configurations because of the geometric flexibility of bistatic platforms,resulting in kinds of models built independently among which there could be some similar even the same motion features.Comprehensive research on such systems in a more comprehensive and general point of view is required to address their difference and consistency.Property analysis of bistatic forwardlooking SAR with arbitrary geometry is achieved including stripmap and spotlight modes on airborne platform,missile-borne platform,and hybrid platform of both.Emphasis is placed on azimuth space variance of some key parameters significantly affecting the subsequent imaging processing,based on which the frequency spectra are further described and compared considering respective features of different platforms for frequency imaging algorithm developing.Simulation results confirm the effectiveness and correctness of our analysis.

Statistical analysis of fracture properties based on particle swarm optimization and Pearson correlation coefficient method

Prediction of reservoir fracture is the key to explore fracture-type reservoir. When a shear-wave propagates in anisotropic media containing fracture,it splits into two polarized shear waves: fast shear wave and slow shear wave. The polarization and time delay of the fast and slow shear wave can be used to predict the azimuth and density of fracture. The current identification method of fracture azimuth and fracture density is cross-correlation method. It is assumed that fast and slow shear waves were symmetrical wavelets after completely separating,and use the most similar characteristics of wavelets to identify fracture azimuth and density,but in the experiment the identification is poor in accuracy. Pearson correlation coefficient method is one of the methods for separating the fast wave and slow wave. This method is faster in calculating speed and better in noise immunity and resolution compared with the traditional cross-correlation method. Pearson correlation coefficient method is a non-linear problem,particle swarm optimization( PSO) is a good nonlinear global optimization method which converges fast and is easy to implement. In this study,PSO is combined with the Pearson correlation coefficient method to achieve identifying fracture property and improve the computational efficiency.

Micromechanical analysis on tensile properties prediction of discontinuous randomized zalacca fibre/high-density polyethylene composites under critical fibre length

In this research,the tensile properties'performance of compression moulded discontinuous randomized zalacca fibre/high-density polyethylene under critical fibre length was analysed by means of experimental method and micromechanical models.These investigations were used to verify the tensile properties models toward the effect of fibre length and volume fraction on the composites.The experimental results showed that the tensile properties of composites had significantly increased due to the enhancement of fibre length.On the contrary,a decline in the tensile properties was observed with the increase of volume fraction.A comparison was made between the available experimental results and the performances of Tsai-Pagano,Christensen and Cox-Krechel models in their prediction of composites elastic modulus.The results showed that the consideration of fibre's elastic anisotropy in the Cox-Krenchel model had yielded a good prediction of the composites modulus,nevertheless the models could not accurately predict the composites modulus for fibre length study.

The difference analysis of physical-mechanical properties of sediments in the central South Yellow Sea and Zhe-Min coastal area in China

The difference analysis of physical-mechanical properties of muddy sediments is made in the central South Yellow Sea and the Zhe-Min（Zhejiang Province to Fujian Province of China） coastal area. The results show that sediments in the two regions are both dominated by mud. There are perfect negative power function correlations between the water content and the density, the compression coefficient and the compression modulus; a good positive power function correlation between the liquid limit and the plastic limit, a perfect positive linear correlation between the water content and the void ratio, and a perfect polynomial function correlation between the miniature vane shear strength and the pocket penetration resistance. In general, compared with sediments in the Zhe-Min coastal area, sediments in the central South Yellow Sea possess high water content, high void ratio,low density, high plasticity, high compressibility, low shear strength. The causes of the differences between physical-mechanical properties of sediments are analyzed from the topographic features, material sources,hydrodynamic conditions, deposition rate, and material composition. Compared with the Zhe-Min coastal area,the central South Yellow Sea is far from the Mainland and low-lying; has poor hydrodynamic condition; the materials diffused to the area are less and dominated by fine clay, have the high content of smectite and organic matters. These factors lead to sediments of the central South Yellow Sea has the higher water content, the higher plasticity, the lower density, and the lower strength than sediments in the Zhe-Min coastal area.

Comparative Analysis of Environment Right and Property Right of Environment Resources

The generation, connotation, property, subject and object, and contents of environment rights and environment resources property were studied. And based on these, the similarities and differences were discussed so as to master the connotation of environment resources property.

Nutritional evaluation,fatty acid analysis and anticancer properties investigation of seeds from kan-zaw,a potential diet oil and medicinal plant

Payenapara lleloneura Kurz.(Kan-zaw),an endemic medicinal plant only found in Tanintharyi Region of Myanmar,is widely used in the treatment of various cancer and different ailments.In the present research,the seeds were phytochemical investigated for their nutritional potential for their use as functional foods or novel diet oil resources.Nutritional evaluation showed that the seeds are rich in fats and carbohydrates(soluble sugars and starch).Fatty acid analyses showed that the seeds accumulate very richα-eleostearic acid(α-ESA,18:3^(Δ9 cis,11-trans),13 trans),an important conjugated fatty acid,up to more than 70% of total fatty acids.The seed oil derived from the Kan-zaw tree contains approximately 3.25% β-eleostearic acid(18:3^(Δ9 trans,11 trans,13 trans)),an unusual conjugated fatty acid that imparts a potent anticancer application and industrially important drying qualities to Kan-zaw oil.Physicochemical properties of the Kan-zaw seeds were examined;petroleum ether(60–90℃)extract of seed oils were also investigated for the saponification value,iodine value and estimation of acid value.Further,the present study investigated cytotoxic potential of ethanol,methanol,acetone,chloroform Kan-zaw seed extracts and commercial Kan-zaw oil against human cervical cancer cell line(HeLa).The Kan-zaw extracts and oil have shown significant anticancer activity on HeLa cells.

Forced vibration analysis of nano-composite rotating pressurized microbeam reinforced by CNTs based on MCST with temperature-variable material properties

In this study, free and forced vibration analysis of nano-composite rotating pressurized microbeam reinforced by carbon nanotubes （CNTs） under magnetic field based on modify couple stress theory （MCST） with temperature-variable material propertiesis presented. Also, the boundary conditions at two ends of nano-composite rotating pressurized microbeam reinforced by CNTs are considered as simply supported. The governing equations are obtained based on the Hamilton＇s principle and then computed these equations by using Navier＇s solution. The magnetic field is inserted in the thickness direction of the nano-composite microbeam. The effects of various parameters such as angular velocity, temperature changes, and pressure between of the inside and outside, the magnetic field, material length scale parameter, and volume fraction of nanocomposite microbeam on the natural frequency and response systemare studied. The results show that with increasing volume fraction of nano-composite microbeam, thickness, material length scale parameter, and magnetic fields, the natural frequency increases. The results of this research can be used for optimization of micro-structures and manufacturing sensors, displacement fluid, and drug delivery.

The effect of reactive plasticizer on viscoelastic and mechanical properties of solid rocket propellants based on different types of HTPB resin

Conventional plasticizers deteriorate mechanical and viscoelastic properties of the propellants due to their migration upon aging and long-term storage,which affects reliability and safety properties during exploitation.To address this issue,conventional plasticizer,dioctyl adipate(DOA),is replaced by reactive one,castor oil(CO).In addition,three different types of HTPB were used to obtain propellants with designed viscoelastic and mechanical properties.The CO increased propellants viscosity,without a significant impact on the propellant processability,regardless to the type of prepolymer.Conversely,mechanical properties were different depending on the type of resin,which were further analyzed by gel permeation chromatography(GPC).Addition of CO formed a denser polymer network and shifted T_(g) to higher values,compared to the compositions with DOA.The tensile strength of CO-containing propellants was lower at +20℃ and +50℃ compared to the reference compositions,while the strain at maximum load and strain at break were significantly increased with pronounced plastic deformation,especially for samples at -30℃.The inclusion of CO in the propellants composition gives more room for adjusting a wide range of mechanical properties.