Antimony-doped tin oxide(ATO) nanoparticles with an average size of ～ 6 nm were prepared by co-precipitation and subsequent heat treatment. Graphitic carbon nitride(g-CN)/ATO hybrid nanocomposite was designed by the ...Antimony-doped tin oxide(ATO) nanoparticles with an average size of ～ 6 nm were prepared by co-precipitation and subsequent heat treatment. Graphitic carbon nitride(g-CN)/ATO hybrid nanocomposite was designed by the combination of thermally synthesized g-CN and ATO nanoparticles by ultrasonication. The materials were characterized using N2 adsorption/desorption(BET), X-ray diffraction(XRD), scanning electron microscopy(SEM), energy dispersive spectroscopy(EDS), transmission electron microscopy(TEM) and Fourier transform infrared spectroscopy(FTIR). A mixture of five volatile organic compounds(VOCs, chloroform, benzene, toluene, xylene and styrene) was used to compare the adsorption capacity of the samples. The adsorption capacity of ATO nanoparticles was improved by the addition of g-CN. Experimental data showed that, among the five VOCs,chloroform was the least adsorbed, regardless of the samples. The g-CN/ATO showed nearly three times greater adsorption capacity for the VOC mixture than pure ATO. The unchanged efficiency of VOC adsorption during cyclic use demonstrated the completely reversible adsorption and desorption behavior of the nanocomposite at room conditions. This economically and environmentally friendly material can be a practical solution for outdoor and indoor VOC removal.展开更多
This paper reports the preparation of antimony doped tin oxide crystalline powders by chemical coprecipitation method. The influence of sintering temperature and the sintering retention time on the thermal infrared em...This paper reports the preparation of antimony doped tin oxide crystalline powders by chemical coprecipitation method. The influence of sintering temperature and the sintering retention time on the thermal infrared emissivity is analysed. The thermal infrared reflectivity is measured and the optimum doping concentration is proposed.展开更多
Harvesting solar energy to produce clean hydrogen from photoelectrolysis of water presents a valuable opportunity to find alternatives for fossil fuels. Three- dimensional nanoarchitecturing techniques can afford enha...Harvesting solar energy to produce clean hydrogen from photoelectrolysis of water presents a valuable opportunity to find alternatives for fossil fuels. Three- dimensional nanoarchitecturing techniques can afford enhanced photoelectrochemical properties by improving geometrical and structural effects. Here, we report quantum-dot sensitized TiO2-Sb：SnO2 heterostructures as a model electrode to enable the optimization of the structural effects through the creation of a highly conductive pathway using a transparent conducting oxide （TCO）, coupled with a high surface area, by introducing branching and low interfacial resistance via an epitaxial relationship. An examination of various morphologies （dot, rod, and lamella shape） of TiO2 reveals that the rod-shaped TiO2-Sb：SnO2 is a more effective structure than the others. A photoelectrode fabricated using optimized CdS--TiO2-Sb：SnO2 produces a photocurrent density of 7.75 mA/cm2 at 0.4 V versus a reversible hydrogen electrode. These results demonstrate that constructing a branched heterostructure based on TCO can realize highperformance photoelectrochemical devices.展开更多
基金supported by a grant from the Korean Ministry of Education, Science, and Technology (MEST)Republic of Korea through the National Research Foundation (NRF) (No. 2017-R1C1B2011968)
文摘Antimony-doped tin oxide(ATO) nanoparticles with an average size of ～ 6 nm were prepared by co-precipitation and subsequent heat treatment. Graphitic carbon nitride(g-CN)/ATO hybrid nanocomposite was designed by the combination of thermally synthesized g-CN and ATO nanoparticles by ultrasonication. The materials were characterized using N2 adsorption/desorption(BET), X-ray diffraction(XRD), scanning electron microscopy(SEM), energy dispersive spectroscopy(EDS), transmission electron microscopy(TEM) and Fourier transform infrared spectroscopy(FTIR). A mixture of five volatile organic compounds(VOCs, chloroform, benzene, toluene, xylene and styrene) was used to compare the adsorption capacity of the samples. The adsorption capacity of ATO nanoparticles was improved by the addition of g-CN. Experimental data showed that, among the five VOCs,chloroform was the least adsorbed, regardless of the samples. The g-CN/ATO showed nearly three times greater adsorption capacity for the VOC mixture than pure ATO. The unchanged efficiency of VOC adsorption during cyclic use demonstrated the completely reversible adsorption and desorption behavior of the nanocomposite at room conditions. This economically and environmentally friendly material can be a practical solution for outdoor and indoor VOC removal.
文摘This paper reports the preparation of antimony doped tin oxide crystalline powders by chemical coprecipitation method. The influence of sintering temperature and the sintering retention time on the thermal infrared emissivity is analysed. The thermal infrared reflectivity is measured and the optimum doping concentration is proposed.
文摘Harvesting solar energy to produce clean hydrogen from photoelectrolysis of water presents a valuable opportunity to find alternatives for fossil fuels. Three- dimensional nanoarchitecturing techniques can afford enhanced photoelectrochemical properties by improving geometrical and structural effects. Here, we report quantum-dot sensitized TiO2-Sb：SnO2 heterostructures as a model electrode to enable the optimization of the structural effects through the creation of a highly conductive pathway using a transparent conducting oxide （TCO）, coupled with a high surface area, by introducing branching and low interfacial resistance via an epitaxial relationship. An examination of various morphologies （dot, rod, and lamella shape） of TiO2 reveals that the rod-shaped TiO2-Sb：SnO2 is a more effective structure than the others. A photoelectrode fabricated using optimized CdS--TiO2-Sb：SnO2 produces a photocurrent density of 7.75 mA/cm2 at 0.4 V versus a reversible hydrogen electrode. These results demonstrate that constructing a branched heterostructure based on TCO can realize highperformance photoelectrochemical devices.
