A heterocyclic derivative of (2 sulphurone benzothiazole) 3 methyl dodecanoate was synthesized. Its tribological performance when added to liquid paraffin was evaluated on a four ball tester and a ring on block machin...A heterocyclic derivative of (2 sulphurone benzothiazole) 3 methyl dodecanoate was synthesized. Its tribological performance when added to liquid paraffin was evaluated on a four ball tester and a ring on block machine. Results indicate that compared with the base oil the wear resistance and load carrying capacities of the oil with novel additive are improved, and the friction coefficient is decreased. There is an optimal content of the novel compound, at which the corresponding oil gives the highest maximum non seizure load. Above the content, the load carrying capacity of the oil is not increased but decreased. The nature of the film formed on the rubbed surface was investigated by X ray photoelectron spectroscopy (XPS) analysis, and the action mechanism of the novel compound was discussed. [展开更多
Different contents of biodiesel and petrodiesel were incorporated into diesel engine oils. The oxidative stability, detergency and antiwear performance of the formulated diesel oils were evaluated. The results indicat...Different contents of biodiesel and petrodiesel were incorporated into diesel engine oils. The oxidative stability, detergency and antiwear performance of the formulated diesel oils were evaluated. The results indicated that, compared with petrodiesel, biodiesel was more liable to promote oxidation degradation of diesel oils, leading to worse oxidative stability, detergency and antiwear ability of the oils.展开更多
Simulated adsorptive experiments using the axletree and lubricating oil containing anticorrosion additive were conducted,and the UV absorbance of the lubricating oil before and after the adsorptive experiments was mea...Simulated adsorptive experiments using the axletree and lubricating oil containing anticorrosion additive were conducted,and the UV absorbance of the lubricating oil before and after the adsorptive experiments was measured.Through the UV spectral measurements the difference in UV absorbance of the lubricating oil before and after the adsorptive experiments was identified,the adsorbed quantity of anticorrosion additive in the interfacial film between lubricating oil and bearing was calculated using the Lambert-Bell principle to verify the adsorption of corrosion inhibitor on the surface of friction pairs.Adsorption experiments on lubricating oil containing both antiwear and anticorrosion additives were carried out and the UV absorbance of lubricating oil samples before and after the experiments was measured to determine the difference in the UV absorbance among lubricating oil samples with the same mass fraction of anticorrosion additive and different mass fractions of antiwear additive.By measuring the ultraviolet spectral absorbance of lubricating oil samples and calculating the adsorbed quantity of anticorrosion additive in the interfacial film it was possible to determine the influence of antiwear additive on the quantity of adsorbed anticorrosion additive on the surface of friction pairs and verify the competitive adsorption relationship between the antiwear additive and the anticorrosion additive.展开更多
Comparative molecular field analysis and comparative molecular similarity indices analysis were employed to analyze the antiwear properties of a series of 57 esters as potential lubricant-based oils. Predictive 3D-qua...Comparative molecular field analysis and comparative molecular similarity indices analysis were employed to analyze the antiwear properties of a series of 57 esters as potential lubricant-based oils. Predictive 3D-quantitative structure tribo-ability relationship models were established using the SYBYL multifit molecular alignment rule with a training set and a test set. The optimum models were all shown to be statistically significant with cross-validated coefficients q^2 > 0.5 and conventional coefficients r^2 > 0.9, indicating that the models are sufficiently reliable for activity prediction, and may be useful in the design of novel ester-based oils.展开更多
文摘A heterocyclic derivative of (2 sulphurone benzothiazole) 3 methyl dodecanoate was synthesized. Its tribological performance when added to liquid paraffin was evaluated on a four ball tester and a ring on block machine. Results indicate that compared with the base oil the wear resistance and load carrying capacities of the oil with novel additive are improved, and the friction coefficient is decreased. There is an optimal content of the novel compound, at which the corresponding oil gives the highest maximum non seizure load. Above the content, the load carrying capacity of the oil is not increased but decreased. The nature of the film formed on the rubbed surface was investigated by X ray photoelectron spectroscopy (XPS) analysis, and the action mechanism of the novel compound was discussed. [
基金the financial support from the Natural Science Foundation of Chongqing(Project NO. CSTC, 2011JJA90020)the Science Foundation for Young Teachers of Logistical Engineering University
文摘Different contents of biodiesel and petrodiesel were incorporated into diesel engine oils. The oxidative stability, detergency and antiwear performance of the formulated diesel oils were evaluated. The results indicated that, compared with petrodiesel, biodiesel was more liable to promote oxidation degradation of diesel oils, leading to worse oxidative stability, detergency and antiwear ability of the oils.
文摘Simulated adsorptive experiments using the axletree and lubricating oil containing anticorrosion additive were conducted,and the UV absorbance of the lubricating oil before and after the adsorptive experiments was measured.Through the UV spectral measurements the difference in UV absorbance of the lubricating oil before and after the adsorptive experiments was identified,the adsorbed quantity of anticorrosion additive in the interfacial film between lubricating oil and bearing was calculated using the Lambert-Bell principle to verify the adsorption of corrosion inhibitor on the surface of friction pairs.Adsorption experiments on lubricating oil containing both antiwear and anticorrosion additives were carried out and the UV absorbance of lubricating oil samples before and after the experiments was measured to determine the difference in the UV absorbance among lubricating oil samples with the same mass fraction of anticorrosion additive and different mass fractions of antiwear additive.By measuring the ultraviolet spectral absorbance of lubricating oil samples and calculating the adsorbed quantity of anticorrosion additive in the interfacial film it was possible to determine the influence of antiwear additive on the quantity of adsorbed anticorrosion additive on the surface of friction pairs and verify the competitive adsorption relationship between the antiwear additive and the anticorrosion additive.
基金supported by the National Nature Science Foundation of China (NSFC, No. 51675395)
文摘Comparative molecular field analysis and comparative molecular similarity indices analysis were employed to analyze the antiwear properties of a series of 57 esters as potential lubricant-based oils. Predictive 3D-quantitative structure tribo-ability relationship models were established using the SYBYL multifit molecular alignment rule with a training set and a test set. The optimum models were all shown to be statistically significant with cross-validated coefficients q^2 > 0.5 and conventional coefficients r^2 > 0.9, indicating that the models are sufficiently reliable for activity prediction, and may be useful in the design of novel ester-based oils.
