We investigated the effect of Al2O3 content on the viscosity of CaO-SiO2-Al2O3-8wt%MgO-1wt%Cr2O3(mass ratio of CaO/SiO2 is 1.0,and Al2O3 content is 17wt%-29wt%)slags.The results show that the viscosity of the slag inc...We investigated the effect of Al2O3 content on the viscosity of CaO-SiO2-Al2O3-8wt%MgO-1wt%Cr2O3(mass ratio of CaO/SiO2 is 1.0,and Al2O3 content is 17wt%-29wt%)slags.The results show that the viscosity of the slag increases gradually with increases in the Al2O3 content in the range of 17wt%to 29wt%due to the role of Al2O3 as a network former in the polymerization of the aluminosilicate structure of the slag.With increases in the Al2O3 content from 17wt%to 29wt%,the apparent activation energy of the slags also increases from 180.85 to 210.23 kJ/mol,which is consistent with the variation in the critical temperature.The Fourier-transform infrared spectra indicate that the degree of polymerization of this slag is increased by the addition of Al2O3.The application of Iida’s model for predicting the slag viscosity in the presence of Cr2O3 indicates that the calculated viscosity values fit well with the measured values when both the temperature and Al2O3 content are at relatively low levels,i.e.,the temperature range of 1673 to 1803 K and the Al2O3 content range of 17wt%-29wt%in CaO-SiO2-Al2O3-8wt%MgO-1wt%Cr2O3 slag.展开更多
In this work, rheological properties of poly (lactic acid) (PLA), low density polyethylene (LDPE) polymer blends were investigated in the molten state. The experiments were carried on a capillary rheometer. The effect...In this work, rheological properties of poly (lactic acid) (PLA), low density polyethylene (LDPE) polymer blends were investigated in the molten state. The experiments were carried on a capillary rheometer. The effect of shear stress, temperature and blending ratio on the flow activation energy at a constant shear stress and melt viscosity of the blends are described. The results showed that the PLA/LDPE polymer blends are pseudo plastic in nature, where there viscosity decreases with increasing shear stress. Also it was found the melt viscosity of the blends decreases with increasing PLA content in the blend.展开更多
Viscosities of uranium solutions in H2O and 3 mol/L HNO3 medium were measured by Ubbelhode flow vis-cometer in the concentration range of 0.5%3.0% from 10 篊 to 30 篊 at 5 篊 interval. Viscosity data were interpreted ...Viscosities of uranium solutions in H2O and 3 mol/L HNO3 medium were measured by Ubbelhode flow vis-cometer in the concentration range of 0.5%3.0% from 10 篊 to 30 篊 at 5 篊 interval. Viscosity data were interpreted in terms of an empirical equation; h =aoexp(boM+coM2). Values of coefficients ao, bo and co were calculated for all the three systems studied. Flow activation energies and thermodynamic parameters were also evaluated.展开更多
以EPDM g MAH为增容剂 ,采用熔融共混技术制备了热塑性聚氨酯弹性体 (TPU)增韧聚丙烯 (PP)材料 ,研究了PP/EPDM g MAH/TPU共混物的流变行为 ,重点讨论了增容剂EPDM g MAH对共混物流变行为的影响。结果表明 :共混物熔体的非牛顿指数n <...以EPDM g MAH为增容剂 ,采用熔融共混技术制备了热塑性聚氨酯弹性体 (TPU)增韧聚丙烯 (PP)材料 ,研究了PP/EPDM g MAH/TPU共混物的流变行为 ,重点讨论了增容剂EPDM g MAH对共混物流变行为的影响。结果表明 :共混物熔体的非牛顿指数n <1,且随EPDM g MAH用量的增加而减小 ,表观粘度随剪切速率和剪切应力的增大而降低 ,熔体符合假塑性流体的流动规律 ;温度升高 ,表观粘度降低 ;随着EPDM g MAH用量的增加 ,共混物的表观粘度升高 。展开更多
基金This work was financially supported by the Fundamental Research Funds for the Central Universities of China(Nos.FRF-TP-20-048A2 and FRF-AT-20-02).
文摘We investigated the effect of Al2O3 content on the viscosity of CaO-SiO2-Al2O3-8wt%MgO-1wt%Cr2O3(mass ratio of CaO/SiO2 is 1.0,and Al2O3 content is 17wt%-29wt%)slags.The results show that the viscosity of the slag increases gradually with increases in the Al2O3 content in the range of 17wt%to 29wt%due to the role of Al2O3 as a network former in the polymerization of the aluminosilicate structure of the slag.With increases in the Al2O3 content from 17wt%to 29wt%,the apparent activation energy of the slags also increases from 180.85 to 210.23 kJ/mol,which is consistent with the variation in the critical temperature.The Fourier-transform infrared spectra indicate that the degree of polymerization of this slag is increased by the addition of Al2O3.The application of Iida’s model for predicting the slag viscosity in the presence of Cr2O3 indicates that the calculated viscosity values fit well with the measured values when both the temperature and Al2O3 content are at relatively low levels,i.e.,the temperature range of 1673 to 1803 K and the Al2O3 content range of 17wt%-29wt%in CaO-SiO2-Al2O3-8wt%MgO-1wt%Cr2O3 slag.
文摘In this work, rheological properties of poly (lactic acid) (PLA), low density polyethylene (LDPE) polymer blends were investigated in the molten state. The experiments were carried on a capillary rheometer. The effect of shear stress, temperature and blending ratio on the flow activation energy at a constant shear stress and melt viscosity of the blends are described. The results showed that the PLA/LDPE polymer blends are pseudo plastic in nature, where there viscosity decreases with increasing shear stress. Also it was found the melt viscosity of the blends decreases with increasing PLA content in the blend.
文摘Viscosities of uranium solutions in H2O and 3 mol/L HNO3 medium were measured by Ubbelhode flow vis-cometer in the concentration range of 0.5%3.0% from 10 篊 to 30 篊 at 5 篊 interval. Viscosity data were interpreted in terms of an empirical equation; h =aoexp(boM+coM2). Values of coefficients ao, bo and co were calculated for all the three systems studied. Flow activation energies and thermodynamic parameters were also evaluated.
文摘以EPDM g MAH为增容剂 ,采用熔融共混技术制备了热塑性聚氨酯弹性体 (TPU)增韧聚丙烯 (PP)材料 ,研究了PP/EPDM g MAH/TPU共混物的流变行为 ,重点讨论了增容剂EPDM g MAH对共混物流变行为的影响。结果表明 :共混物熔体的非牛顿指数n <1,且随EPDM g MAH用量的增加而减小 ,表观粘度随剪切速率和剪切应力的增大而降低 ,熔体符合假塑性流体的流动规律 ;温度升高 ,表观粘度降低 ;随着EPDM g MAH用量的增加 ,共混物的表观粘度升高 。
文摘为了研究橡胶沥青的黏度影响因素以及黏流特性,制备了不同胶粉掺量、不同混合反应温度和时间条件下的橡胶沥青(RA),采用布洛克菲尔德黏度计分别测试180℃旋转黏度,分析胶粉掺量、混合温度以及处理时间对RA黏度的影响,并采用Arrhenius方程计算橡胶沥青的黏流活化能E_η,并分析E_η的变化规律.结果表明,橡胶沥青的黏度与胶粉掺量符合指数增长模型,适当提高处理温度和延长处理时间对橡胶沥青黏度具有一定的等效性,处理温度过高或时间过长都可能引起橡胶分子链的降解而导致橡胶沥青的黏度降低.随着胶粉掺量的增大,原样与老化后的橡胶沥青黏流活化能E_η大致呈先增大后减小趋势,在胶粉掺量10%～15%范围内黏流活化能存在峰值,对于相同的胶粉掺量,老化后黏流活化能有所增大.从黏度影响及黏流特性的角度,推荐橡胶粉掺量为15%～25%,处理温度180℃,处理时间90 min.
