Enriching Iodine and Regulating Grain Aroma,Appearance Quality,and Yield in Aromatic Rice by Foliar Application of Sodium Iodide

Applying iodine fertilizers to cultivate iodine-rich crops for daily intake is an effective approach for iodine supplementation,especially for aromatic rice.Field experiments were conducted during the early growing seasons of 2021 and 2022 to evaluate the impacts of foliar application of iodine fertilizer on aromatic rice and to explore the optimal iodine fertilizer concentration.At the full heading stage,six different concentrations of sodium iodide solutions of 0%(CK),0.010%(T1),0.025%(T2),0.050%(T3),0.075%(T4),and 0.100%(T5)were applied to indica aromatic rice cultivars Meixiangzhan 2 and Xiangyaxiangzhan.The results showed that sodium iodide treatments significantly increased the iodine and sodium contents in both leaves and grains.Compared with the CK,the T1 and T2 treatments increased the 2-acetyl-1-pyrroline(2-AP)content in mature grains by 8.41%-101.66%and 13.58%-74.60%,respectively.Improvements in the contents of 1-pyrroline-5-carboxylic acid,proline,1-pyrroline,and methylglyoxal,as well as the activity of proline dehydrogenase were also detected.Additionally,sodium iodide treatments remarkably decreased the chalky grain rate,chalkiness area,and chalkiness degree of aromatic rice,with the T2 treatment exhibiting a 17.79%-47.42%decrease in chalkiness degree compared with the CK.Meanwhile,T1 and T2 treatments showed beneficial impacts on chlorophyll content,photosynthetic characteristics,and yield components,while T3,T4,and T5 treatments exhibited adverse effects on leaf and grain yields.The linear discriminant analysis revealed significant differences between treatments.The correlation analysis and piecewise structural equation modeling showed that the iodine and sodium influenced the photosynthetic characteristics and chlorophyll content of the leaves,thereby regulating the 2-AP biosynthesis and yield components,ultimately affecting the 2-AP content and yield.Overall,this study suggests that foliar application of 0.025%sodium iodide is an effective method to enrich the iodine content in rice grains,improve the grain aroma and appearance quality of aromatic rice,without detrimental effects on grain yield.

Effects of Curing Systems on Properties of High Volume Fine Mineral Powder RPC and Appearance of Hydrates

The effects of different curing systems on the properties of high volume fine mineral powder RPC （reactive powder concrete） and the appearances of hydrates were studied. The experimental results show that dry-heating curing promotes the development of pozzolanic reactivity of fine mineral powder; due to low cement content, 0.20 water-bind ratio and high reactive fine mineral powder content, the strength of RPC increases by around 200% after steam curing and subsequent dry-heating curing. Scanning electron microscopy and energy spectrum diagram showed that： after the high volume fine mineral powder RPC with 0.16 water-bind ratio underwent steam curing and dry-heating curing, there was no significant change in the appearance of hydrates; after the RPC with 0.20 water-bind ratio, the cement content of 150 kg/m3 and more steel slag powder underwent dry-heating curing, there was a certain change in the appearance of C-S-H, the structure of gel was more compact and was uniformly distributed, and the Ca/Si of C-S-H gel decreased from 1.41 to around 1.20.

Multi-Objective Image Optimization of Product Appearance Based on Improved NSGA-II

A second-generation fast Non-dominated Sorting Genetic Algorithm product shape multi-objective imagery optimization model based on degradation(DNSGA-II)strategy is proposed to make the product appearance optimization scheme meet the complex emotional needs of users for the product.First,the semantic differential method and K-Means cluster analysis are applied to extract the multi-objective imagery of users;then,the product multidimensional scale analysis is applied to classify the research objects,and again the reference samples are screened by the semantic differentialmethod,and the samples are parametrized in two dimensions by using elliptic Fourier analysis;finally,the fuzzy dynamic evaluation function is used as the objective function of the algorithm,and the coordinates of key points of product contours Finally,with the fuzzy dynamic evaluation function as the objective function of the algorithm and the coordinates of key points of the product profile as the decision variables,the optimal product profile solution set is solved by DNSGA-II.The validity of the model is verified by taking the optimization of the shape scheme of the hospital connection site as an example.For comparison with DNSGA-II,other multi-objective optimization algorithms are also presented.To evaluate the performance of each algorithm,the performance evaluation index values of the five multi-objective optimization algorithms are calculated in this paper.The results show that DNSGA-II is superior in improving individual diversity and has better overall performance.

YOLO-Banana:An Effective Grading Method for Banana Appearance Quality

The increasing trend towards independent fruit packaging demands a high appearance quality of individually packed fruits.In this paper,we propose an improved YOLOv5-based model,YOLO-Banana,to effectively grade banana appearance quality based on the number of banana defect points.Due to the minor and dense defects on the surface of bananas,existing detection algorithms have poor detection results and high missing rates.To address this,we propose a densitybased spatial clustering of applications with noise(DBSCAN)and K-means fusion clustering method that utilizes refined anchor points to obtain better initial anchor values,thereby enhancing the network’s recognition accuracy.Moreover,the optimized progressive aggregated network(PANet)enables better multi-level feature fusion.Additionally,the non-maximum suppression function is replaced with a weighted non-maximum suppression(weighted NMS)function based on distance intersection over union(DIoU).Experimental results show that the model’s accuracy is improved by 2.3%compared to the original YOLOv5 network model,thereby effectively grading the banana appearance quality.

View interpolation networks for reproducing the material appearance of specular objects

Background In this study, we propose view interpolation networks to reproduce changes in the brightness of an object′s surface depending on the viewing direction, which is important for reproducing the material appearance of a real object. Method We used an original and modified version of U-Net for image transformation. The networks were trained to generate images from the intermediate viewpoints of four cameras placed at the corners of a square. We conducted an experiment using with three different combinations of methods and training data formats. Result We determined that inputting the coordinates of the viewpoints together with the four camera images and using images from random viewpoints as the training data produces the best results.

Epiphanic Revival: Exploring Metallic Finishes on Batik Fabrics in Ghana

Batik fabric is an integral part of the traditional cloth culture of the Ghanaian traditional setting. However, the batik fabric has marginal usage due to its casual visual appearance. This studio practice seeks to explore the epiphanic revival in the use of metallic finishes on batik substrate to create an enhanced visual appearance with embellished aesthetic sensibilities and diversified use. The researchers adopted the studio-based approach of the qualitative design to manipulate handmade tools, techniques (collagraph) and the batik fabrics through experimentation to produce a glittering mercurial batik fabric which is typically an industrial practice. The studio practice took place at the Textile Design and Technology studio, Takoradi Technical University, Ghana. The traditional batik fabric was manipulated through fabric decoration techniques in accordance with studio-based practices. The Addie model was adopted as a methodological approach in the analysis, design, development, implementation, and evaluation processes of the experimentation processes of the study. Findings revealed that the hand techniques used in the production process for the metallic prints produced interesting accidentals finishes and effects that machine work cannot achieve, producing new discoveries of visual enhancements of traditional batik fabric. Traditional batiks became mercurial with glittery effects. The metallic prints on the fabric also changed its consumption pattern from mere casual fabric to classic and cosmopolitan fabric for varied uses suitable for wearable to non-wearable.

Genetic dissection of rice appearance quality and cooked rice elongation by genome-wide association study

Appearance and cooked rice elongation are key quality traits of rice. Although some QTL for these traits have been identified, understanding of the genetic relationship between them remains limited. In the present study, large phenotypic variation was observed in 760 accessions from the 3 K Rice Genomes Project for both appearance quality and cooked rice elongation. Most component traits of appearance quality and cooked rice elongation showed significant pairwise correlations, but a low correlation was found between appearance quality and cooked rice elongation. A genome-wide association study identified 74 QTL distributed on all 12 chromosomes for grain length, grain width, length to width ratio, degree of endosperm with chalkiness, rice elongation difference, and elongation index. Thirteen regions containing QTL stably expressed in multiple environments and/or exerting pleiotropic effects on multiple traits were detected. By gene-based association analysis and haplotype analysis, 46 candidate genes, including five cloned genes, and 49 favorable alleles were identified for these 13 QTL. The effect of the candidate gene Wx on rice elongation difference was validated by a transgenic strategy. These results shed light on the genetic bases of appearance quality and cooked rice elongation and provide gene resources for improving rice quality by molecular breeding.

Endoscopic appearance of AIDS-related gastrointestinal lymphoma with c-MYC rearrangements: Case report and literature review

Acquired immune deficiency syndrome (AIDS)-related lymphoma (ARL) remains the main cause of AIDS-related deaths in the highly active anti-retroviral therapy (HAART) era. Recently, rearrangement of MYC is associated with poor prognosis in patients with diffuse large B-cell lymphoma. Here, we report a rare case of gastrointestinal (GI)-ARL with MYC rearrangements and coinfected with Epstein-Barr virus (EBV) infection presenting with various endoscopic findings. A 38-yearold homosexual man who presented with anemia and was diagnosed with an human immunodeficiency virus infection for the first time. GI endoscopy revealed multiple dish-like lesions, ulcerations, bloody spots, nodular masses with active bleeding in the stomach, erythematous flat lesions in the duodenum, and multiple nodular masses in the colon and rectum. Magnified endoscopy with narrow band imaging showed a honeycomb-like pattern without irregular microvessels in the dish-like lesions of the stomach. Biopsy specimens from the stomach, duodenum, colon, and rectum revealed diffuse large B-cell lymphoma concomitant with EBV infection that was detected by high tissue EBV-polymerase chain reaction levels and Epstein-Barr virus small RNAs in situ hybridization. Fluorescence in situ hybridization analysis revealed a fusion between the immunoglobulin heavy chain (IgH) and c-MYC genes, but not between the IgH and BCL2 loci. After 1-mo of treatment with HAART and R-CHOP, endoscopic appearance improved remarkably, and the histological features of the biopsy specimens revealed no evidence of lymphoma. However, he died from multiple organ failure on the 139 th day after diagnosis. The cause of his poor outcome may be related to MYC rearrangement. The GI tract involvement in ARL is rarely reported, and its endoscopic findings are various and may be different from those in non-AIDS GI lymphoma; thus, we also conducted a literature review of GI-ARL cases.

Preparation of ceria with large particle size and high appearance density

Cerium is one of the most abundant rare earth elements in both bastnasite and monazite. Ceria has been widely used in optical, catalytic, electrolyte, and sensor materials, with unique performances. With the development of functional materials, great interest has been focused on the synthesis and characterization of specific fine/mesoporous ceria powder. In this study, the modified precipitation and recrystallization processes combined with a controlled calcination process for fabricating the ceria with large particle size and high appearance density was reported. During precipitation, a certain amount of mineral acid such as nitric acid served as an additive, to adjust the precipitation and crystallization processes of cerium oxalates. An appropriate acidic condition could lead the process into the Oswald ripening stage and made the particles become bigger. Thus, the appearance density of powder was increased. The optimized conditions, such as the temperature, feeding speed, type and concentration of mineral acids, and the concentration of cerium-contained stock solution, were investigated and evaluated.

Spontaneous pneumomediastinum and Macklin effect:Overview and appearance on computed tomography

Spontaneous pneumomediastinum(SPM) is described as free air or gas located within the mediastinum that is not associated with any noticeable cause such as chest trauma.SPM has been associated with many conditions and triggers,including bronchial asthma,diabetic ketoacidosis,forceful straining during exercise,inhalation of drugs,as well as other activities associated with the Valsalva maneuver.The Macklin effect appears on thoracic computed tomography(CT) as linear collections of air contiguous to the bronchovascular sheaths.With the recent availability of multidetector-row CT,the Macklin effect has been seen in the clinical setting more frequently than expected.The aim of this review article is to describe the CT imaging spectrum of the Macklin effect in patients with SPM,focusing on the common appearance of the Macklin effect,pneumorrhachis,and persistent SPM with pneumatocele.

Genetic and Genotype × Environment Interaction Effects for Appearance Quality of Rice

This study was conducted to generate genetic information in rice varieties based on a complete diallel crosses over two years. The results indicated that genotype effect was significant for all traits. Genotype × environment interaction effects were significant only for cooked grain length （CGL） and cooked grain shape （CGSH）. General combining ability （GCA） and specific combining ability （SCA） effects were significant for entire traits, which indicated the important roles of both additive and non-additive gene actions. GCA x environment interaction effects were significant for CGL, CGSH and grain elongation index （GEI）. In the controlling of the inheritance of milled grain shape （GSH）, milled grain width （MGW）, GEI, milled grain length （MGL）, CGSH and cooked grain width （CGW）, the additive gene effects were more important than non-additive one. The average degree of dominance was within the range of partial dominance for all of the traits. The narrow-sense heritability was ranged from 0.65 （GSH） to 0.36 （CGL）. GCA effects were significant for all of the parents in milled grain length and it was significant for some of the parents in other traits. The crosses of Deilmani × IRFAON-215 exhibited significant SCA for GEI. The positive mean of heterosis was observed for CGW. The highest maximum values of heterosis were revealed in GEI, flowed by GSH, MGW and CGW. GCA and MPV were significantly and positively correlated together for all traits.

Characterization of the sequence spectrum of DNA based on the appearance frequency of the nucleotide sequences of the genome——A new method for analysis of genome structure

The nucleotide (base) sequence of the genome might reflect biological information beyond the coding sequences. The appearance frequencies of successive base sequences (key sequences) were calculated for entire genomes. Based on the appearance frequency of the key sequences of the genome, any DNA sequences on the genome could be expressed as a sequence spectrum with the adjoining base sequences, which could be used to study the corresponding biological phenomena. In this paper, we used 64 successive three- base sequences (triplets) as the key sequences, and determined and compared the spectra of specific genes to the chromosome, or specific genes to tRNA genes in Saccharomyces cerevisiae, Schizosaccharomyces pombe and Escherichia coli. Based on these analyses, a gene and its corresponding position on the chromosome showed highly similar spectra with the same fold enlargement (approximately 400-fold) in the S. cerevisiae, S. pombe and E. coli genomes. In addition, the homologous structure of genes that encode proteins was also observed with appropriate tRNA gene(s) in the genome. This analytical method might faithfully reflect the encoded biological information, that is, the conservation of the base sequences was to make sense the conservation of the translated amino acids sequence in the coding region, and might be universally applicable to other genomes, even those that consisted of multiple chromosomes.

QTL mapping of grain appearance quality traits and grain weight using a recombinant inbred population in rice(Oryza sativa L.)

supported by a grant from the National High-Tech R＆D Program of China （2014AA10A603, 2014AA10A604）;a grant from the Youth Foundation in Sichuan, China （2011JTD0022）;the special fund for China Agricultural Research System （CARS-01-08）;the Provincial Specialized Funds for Innovation Ability Promotion in Sichuan, China （2013GXJS005）

Water Management for Improvement of Rice Yield,Appearance Quality and Palatability with High Temperature During Ripening Period

To clarify the optimal water management in large-scale fields under high temperatures at the ripening period,effective water managements during this period for improvement of yield,appearance quality and palatability were investigated.Compared with intermittent irrigation and flooded irrigation,the soil temperature with saturated irrigation remained low throughout the day,and the decrease rate of the bleeding rate of hills was the lowest.These results suggested that the saturated irrigation maintained root activity.For the three irrigation types,the number of spikelets per m2 and 1000-grain weight were similar,however,saturated irrigation resulted in significantly higher rice yield due to improvement in the percentage of ripened grains.The saturated irrigation produced a high percentage of perfect rice grains and thicker brown rice grain,furthermore,the palatability of cooked rice was excellent because protein content and hardness/adhesion ratio were both low.Thus,under high-temperature ripening conditions,soil temperature was lowered and root activity was maintained when applying saturated irrigation after heading time.The results indicated that saturated irrigation is an effective countermeasure against high-temperature ripening damage.

Water,Nitrogen and Plant Density Affect the Response of Leaf Appearance of Direct Seeded Rice to Thermal Time

Field experiments were conducted in the Ebro Delta area （Spain）, from 2007 to 2009 with two rice varieties： Gleva and Tebre. The experimental treatments included a series of seed rates, two different water management systems and two different nitrogen fertilization times. The number of leaves on the main stems and their emergence time were periodically tagged. The results indicated that the final leaf number on the main stems in the two rice varieties was quite stable over a three-year period despite of the differences in their respective growth cycles. Interaction between nitrogen fertilization and water management influenced the final leaf number on the main stems. Plant density also had a significant influence on the rate of leaf appearance by extending the phyllochron and postponing the onset of intraspecific competition after the emergence of the 7th leaf on the main stems. Final leaf number on the main stems was negatively related to plant density. A relationship between leaf appearance and thermal time was established with a strong nonlinear function. In direct-seeded rice, the length of the phyllochron increases exponentially in line with the advance of plant development. A general model, derived from 2-year experimental data, was developed and satisfactorily validated; it had a root mean square error of 0.3 leaf. An exponential model can be used to predict leaf emergence in direct-seeded rice.

Relationships of Ethylene Evolution Rate and 1-Aminocylopropane-1-Carboxylic Acid Concentration in Grains during Filling Period with Appearance Quality of Rice

To elucidate the relationship between ethylene evolution from the grains and the appearance quality of rice, ten different rice genotypes were used to determine the ethylene evolution rate, 1-aminocylopropane-1-carboxylic acid （ACC） concentration in grains during grain filling and the appearance quality of rice, and the effects of chemical regulators on concentrations of ethylene and ACC in the grains during grain filling were also investigated to verify the roles of ethylene in the rice quality formation. The ethylene evolution rates and ACC concentrations in grains during the mid and late grain filling stages were very significantly and positively correlated with chalky kernel percentage and chalkiness. The cultivars with a low ACC concentration in grains exhibited a close amyloplast arrangement and small space between starch granules, whereas those with a high ACC concentration in grains showed a loose arrangement and wide space between the granules. Application of 1 μmol/L ACC to panicles at mid and late grain filling stages significantly loosened amyloplast arrangement and increased chalky kernel percentage, chalky area and chalkiness, and the results were reversed when 1 μmol/L amino-ethoxyvinylglycine, an inhibitor of ACC synthesis enzyme, was applied to panicles. A practice of moderate dry-wet alternate irrigation reduced ethylene evolution and ACC concentration in grains and thereby reduced chalkiness. The results suggested that ethylene and ACC in grains play an important role in the endosperm structure and appearance quality of rice, and the appearance quality would be improved by reducing ethylene evolution and ACC in grains through either variety breeding and selection, or chemical regulations or cultivation techniques.

Genetic mechanism of heterosis for rice milling and appearance quality in an elite rice hybrid

Development of hybrid rice with high yield and grain quality is a goal of rice breeding.To investigate the genetic mechanism of heterosis for rice milling and appearance quality in indica/xian rice,QTL mapping was conducted using 1061 recombinant inbred lines(RILs)derived from a cross of the xian rice cultivars Quan 9311B(Q9311B)and Wu-shan-si-miao(WSSM),and a backcross F_(1)(BC_(1)F_(1)) population developed by crossing the RILs with Quan 9311A(Q9311A),combined with phenotyping in two environments.The F_(1) hybrid(Q9311A×WSSM)showed various degrees of heterosis for milling and appearance quality.A total of 142 main-effect QTL(M-QTL)and 407 pairs of epistatic QTL(E-QTL)were identified for five milling and appearance quality traits and grain yield per plant(GYP)in the RIL,BC_(1)F_(1) and mid-parental heterosis(H_(MP)) populations.Differential detection of QTL in three populations revealed that most additive loci detected in the RILs did not show heterotic effects,but some of them did contribute to BC_(1)F_(1) trait performance.Unlike heterosis of GYP,single-locus overdominance and epistasis were the main contributors to heterosis for milling and appearance quality.Epistasis contributed more to the heterosis for milling quality than to that for appearance quality.Three(four)QTL regions harboring opposite(consistent)directions of favorable allele effects for GYP and grain quality were identified,indicating the presence of partial genetic overlaps between GYP and grain quality.Three strategies are proposed to develop hybrid rice with high yield and good grain quality:1)pyramiding favorable alleles with consistent directions of gene effects for GYP and grain quality at the M-QTL on different chromosomes;2)introgressing favorable alleles for GYP and grain quality into the parents and then pyramiding and fixing these additive effects in hybrids;and 3)pyramiding overdominant and dominant loci and minimizing or eliminating underdominant loci from the parents.

The Creative Design Research of Product Appearance Based on Human-machine Interaction and Interface

Today’s product creative design has rendered many fe atures and has brought a great change in our everyday life, there are many new c hallenges in its traditional theory and principle. According to the traditional design theory, the FBS design model pays more attention to the function and stru cture of the product. But this model still couldn’t strengthen the relation bet ween product appearance design and human-machine design effectively. This paper adopt converse design thinking and presents an improved design thinking methodo logy based on C: FBS for product appearance design and give a general summarizat ion for the features, methods and technology based on human-machine interaction and interface. Meanwhile it also combines with the behavior design of product r elated IT fields and constructs a new outline to improve the design of product a ppearance supported by the technology of computer aided design. So the new metho d about design thinking for computer aided design, the new abstract product design model and the key problem of design thinking based on human-machine inte raction and interface are addressed in this paper. This kind of creative design theory that is driven by human-machine interaction and interface will help the development of CAD software system and the research of product design and manufa cture. Additionally, this paper gives some beneficial characters to address the theory based on human-machine interaction and interface. Meanwhile, combining with the developing of computer technology, the trends of design thinking based on t he technology of human-machine interaction and interface are also analyzed and discussed at the end of this paper.

Effects of Plastic Film Mulching on Quality and Appearance of Statuma Mandarin Fruit

Six-year Statuma mandarin (Citrus unshiu Marc. Cv. Miyagawa Wase) trees were used as materials to investigate the effects of plastic film mulching on quality and appearance of Statuma mandarin fruit during three periods of cell division, cell enlargement and mature stages. The results showed that mulching during the cell division and early-mature stages increased total sugar and reduced sugar content of fruit as well as the Vc content, compared to the control. However, the titratable acid content, fruit size, peel weight and single fruit weight were all lower than the control. Film mulching during the cell division phage resulted in higher edible fruit rate, while the fruit shape index was similar to the control. Mulching during the early-mature stage didn’t affect the edible rate of fruit, but caused lower fruit shape index. Compared to the control, film mulching during the cell enlargement period caused lower total and reducing sugar content, titratable acid content and edible rate, while the Vc content was a little bit higher than the control. In addition, the fruit size, peel weight, single fruit weight and fruit shape index were all lower than the control. Mulching during the early-mature period effectively enhanced the content of total and reduced sugar and Vc and decreased the titratable acid content. Hence, it increased fruit quality but had negative effect on fruit appearance.

Translation and Validation of the Nepalese Version of Derriford Appearance Scale (DAS59)

Objectives: To establish a valid and reliable translated version of Derriford Appearance Scale (DAS59) for Nepali population. Methods: A standard translation-back-translation procedure was used followed by evaluation of semantic, conceptual and society equivalence by the committee and changes were made according to recommendations. This corrected version was pretested and a final version was developed. A validation study was performed using the final version on 424 patients including 212 patients with clinical appearance problems and similar number of young adults who had no concern for facial appearance. Reliability was assessed by Cronbach’s alpha value and test-retest correlation coefficient. Discriminate and convergent validity were assessed by comparison between clinical and normal population and correlation with Beck’s Anxiety Inventory (BAI), Beck’s Depression Inventory (BDI) and General Health questionnaire (GHQ). Results: The results indicated excellent internal consistency (Cronbach’s alpha = 0.98) and good test-retest reliability (0.91 for clinical population, 0.86 for normal population). The Discriminate validity was good with statistically significant differences between clinical and normal population. The convergent validity was confirmed by good correlation with other related psychometric tools. Conclusion: A valid and reliable Nepali DAS59 version was developed which can be used for research and clinical assessment of patients with appearance problems and concerns.