Application and development of friction stir welding technology in high speed EMU manufacturing

The application status of friction stir welding technology is introduced,and the application research of advanced FSW technology in the manufacture of high-speed electric multiple unit aluminum alloy body is analyzed,including the application of traditional friction stir welding technology to a combination of a lap joint and butt joint,and butt joint of large thick plate by both sides process,also introduces bobbin-tool friction stir welding to a butt joint and three-dimensional space curved friction stir welding to T-joint. At the same time the future development trend of new FSW technology derived from traditional FSW technology in rail vehicle manufacturing industry is put forward. As the fast developing of critical technology used on railway vehicles,quick applying advanced welding technology will affect products quality,manufacturing cost and production cycle time directly,and it certainly will be one of the approaches to develop markets by all the railway vehicles manufacturing enterprises.

Application and development in railway vehicles trend of new welding technologies manufacturing industry

This paper introduces the application of new automatic welding technologies in railway vehicles manufacturing industry, and presents the state of art of advanced friction stir welding technology, semi-penetration laser welding technology and laser-arc hybrid welding technology in manufacturing aluminum alloy body shell, stainless steel body shell and bogie. This paper also analyzes the application and development trend of three welding technologies in the future.

A survey on future research about electron beam welding for aerospace applications

Electron beam welding plays an important role in the aerospace industry where components like sensors,gears,actuators and air frames used in aircraft and rocket engines were welded using this technique.Welding is normally performed in a vacuum to avoid the scatter of electron due to the presence of gas molecules in the atmosphere and hence electron beam welding process provides the greater results.But still joining of dissimilar metals is challenging.This paper represents review of process,generation and distribution of heat source various input parameters,materials,microstructure,mechanical strength and the possibilities of joining dissimilar metals using electron beam welding.

BASIC THEORY AND APPLICATIONS OF WELDING ARC SPECTRAL INFORMATION

Welding arc spectral information is a rising welding information source. In some occasion, it can reflect many physical phenomena of welding process and solve many problems that cannot be done with arc electric information, acoustic information and other arc information. It is of important significance in developing automatic control technique of welding process and other similar process. Many years study work on welding arc spectral information of the anthor are discussed from three aspects of theory, method and application. Basic theory, view and testing methods of welding arc spectral information has been put forward. In application aspects, many applied examples, for example, monitoring of harmful gases in arc （such as hydrogen and nitrogen） with the method of welding arc spectral information; welding arc spectral imaging of the welding pool which is used in automatic seam tracking; controlling of welding droplet transfer with welding arc spectral information and so on, are introduced. Especially, the successful application in real time controlling of welding droplet transfer in pulsed GMAW is introduced too. These application examples show that the welding arc spectral information has great applied significance and development potentialities. These .content will play an important role in applying and spreading welding arc spectral informarion technology.

Research and engineering application of the arc welding pulsed controller technology

The tenacity of heat-affected zone （HAZ） will decline and the size of grains will increase, because of the overheating on HAZ when submerged are welding （SAW） is ased to thick plate with high heat input. The shaping will worsen when SAW is used to thin plate with high current at high speed. A new SAW technology, the pulsed direct current （DC） automatic SAW, will be put forward in this paper in order to overcome the above shortcomings. And a pulsed controller with micro-controller unit （MCU） as the core, nixie tube （NT） and keyboard as the man-machine conversation interface is developed. The main functions of the pulsed controller include the output of pulsed welding current and the working with twinwire. The research has widely prospects in application with significant meanings in theory and practical engineering.

DEVELOPMENT AND APPLICATION OF ADAPTIVE MESH TECHNIQUE IN THREE DIMENSIONAL NUMERICAL SIMULATION OF WELDING PROCESS

The adaptive mesh mesh technique is developed and applied in three dimensional numerical simulation of welding process on the base of the commercial software. Special user subroutine is worked out to accom- plish this function.This technique can make the dense mesh moving simultaneously with the heat source while the other area of the structure with much coarser mesh, greatly reducing the number of nodes and elements in the analysis.Temperature field,displacement and stress distributions during welding pro- cess me analyzed by FEM method with adaptive mesh and the analysis is also conducted with normal FEM method. The temperature field,displacement and stress distributions obtained with both methods are shown in contrast. The results show that the temperature fields and the displacement distributions of simulation on adaptive mesh correspond wery well with that of without adaptive mesh. Though the stress distributions have some difference,but the trends of the stress distribution are corresponding.The com- parison of the computing time of the two meshes indicates that the adaptive that the adaptive mesh can greatly reduce the calculation time when used for welding process.

Application of the wavelet packet and its energy spectrum to identify nugget splash during the aluminum alloys spot welding

Nugget splash during aluminum alloys spot welding has a detrimental effect on weld nugget integrity, strength and durability of the welded joints. This investigation is performed to identify nugget splash from voltage signals because these are easily accessible on-line. In the present work, we propose a novel method based on the wavelet packet transform and its energy spectrum for pattern recognition of splash signal. The result demonstrates that this novel method is more accuracy and a useful way of monitoring the spot welding quality.

Principles and application of RES welding technology

Friction element welding technology is rich of flow drill screws combined with friction welding technology and is developed for the hot-forming steel plate and aluminum alloy welding of car body-in-white.In this paper,the principle of RES welding technology,equipment,technical characteristics,application condition and welding parameters are analyzed systematically.Moreover,the changing laws of welding parameters and welded joint quality control standards are described,which provides the necessary technical support for safety and light-weight car body design requirements.This study has high practical application value,and enriches the automobile body joining technology.

An application of ultrasonic phased array imaging in electron beam welding inspection

The basic principle and features of ultrasonic phased array imaging are discussed in this paper. Through the ultrasonic phased array technology, the electron beam welding defects and frozen keyholes characterization and imaging were realized. The ultrasonic phased array technology can detect kinds of defects in electron beam welding (EBW) quickly and easily.

Application of response surface methodology to optimize process parameters in friction welding of Ti-6Al-4V and SS304L rods

A method to decide near optimal settings of the process parameters in friction welding was proposed.The success of the friction welding process is based on various input parameters like friction pressure,friction time,upset pressure and upset time and output parameters like tensile strength,hardness and material loss.Ti-6Al-4V and SS304L(SS) materials were joined by friction welding process using interlayer techniques.The Box-Behnken design and response surface methodology(RSM) were applied to deciding the number of experiments to be performed and identify the optimum process parameters for obtaining better joint strength.The results were highly encouraging.Join strength of 523 MPa was obtained at a friction pressure of 12 N/mm^2,upset pressure of40 N/mm^2,friction time of 1.2 s and upset time of 7 s.

Dynamic and control system analysis of two-wheeled robot for welding application

Aiming at the welding condition of space complex seam is uncertain and the intelligence of welding robot is unideal, a two-wheeled mobile robot is developed. It not only has the capacity of autonomous decision and avoiding obstacles, but also can flexibly move and strongly adapt variable environment. The composition of the welding robot is described and the dynamic model is established. The feasible control strategy and control algorithm is put forward. The simulation experiments of real world are conducted, the results are satisfying.

Application of Nd:YAG Laser Welding to Implantable Neuro-Stimulator

It is difficult to weld the material and structure of implantable neuro-stimulator such as pure medical titanium and irregular outside shield by conventional arc welding methods.Currently there are few reports on the neuro stimulator sealing technology,and none of them have simultaneously considered the quality control methods.In order to develop the sealing procedure and quality control methods,an investigation of applying Nd：YAG laser welding to implantable neuro-stimulator components is carried out.Firstly,the automatic Nd：YAG laser welding system equipped with proper fixture configuration is introduced.A special fixture structure is illustrated and the key point for the device is to reduce the fit-up gap between the two shields.Then,a novel welding process technique is proposed to satisfy the engineering requirements.The optimized process parameters for titanium shell,feedthrough and fastener are provided and concluded by an orthogonal experiment.Finally,different quality control measures such as visual inspection,X-ray detecting and leakage testing,are presented on the final products.The results show that the Nd：YAG laser welding applied on the implanted neuro-stimulator under optimized parameters can prevent welding defects and improve the weld joints quality.Combination of various quality control methods will guarantee the sealing performance and mechanical properties of the products.It is confirmed that the processing procedure and quality methods can not only resolve the process technology on welding ultra-thin structure of medical device,but also provide the reference for other implantable device.

Analysis and application of partial least square regression in arc welding process

Because of the relativity among the parameters, partial least square regression(PLSR)was applied to build the model and get the regression equation. The improved algorithm simplified the calculating process greatly because of the reduction of calculation. The orthogonal design was adopted in this experiment. Every sample had strong representation, which could reduce the experimental time and obtain the overall test data. Combined with the formation problem of gas metal arc weld with big current, the auxiliary analysis technique of PLSR was discussed and the regression equation of form factors (i.e. surface width, weld penetration and weld reinforcement) to process parameters(i.e. wire feed rate, wire extension, welding speed, gas flow, welding voltage and welding current)was given. The correlativity structure among variables was analyzed and there was certain correlation between independent variables matrix X and dependent variables matrix Y. The regression analysis shows that the welding speed mainly influences the weld formation while the variation of gas flow in certain range has little influence on formation of weld. The fitting plot of regression accuracy is given. The fitting quality of regression equation is basically satisfactory.

Study on non-electric welding and its application in emergency maintenance

Non-electric welding is a novel efficient technique for emergency maintenance, which utilizes the heat released by self-propagating combustion to join metals without needing arty power supply or gas sources. Non-electric welding material, named non-electric welding pen, was prepared by utilizing highly-exothermic thermit （ Cud ＋ Al） with other additive powders. The effects of reactant particle size and mixing uniformity on the combustion characteristic of the welding pen were investigated. The results show that the particle size of reactant powder has a significant effect on combustion velocity. With increasing the particle size of reactant powder, the combustion velocity decreases obviously. Moreover, mixing uniformity and particle size are shown to be main factors influencing heat produced in single time, and accordingly affect the combustion temperature. Welding experiments were performed with 45 steel as the base material, and results show that the joint is of a metallurgie bonding with the tensile strength above 280 MPa, which proves non-electric welding a fusion welding technique.

Dissimilar Welding of Superduplex Stainless Steel/HSLA Steel for Offshore Applications Joined by GTAW

The dissimilar metal weld is demanding as well as the similar weld, however, dissimilar weld is more complex than similar weld due to the necessity of being applied in zones where a requirement is to improve some properties. In this work the main purpose is to know the mechanical behavior of a dissimilar weld between HSLA Steel and Superduplex Stainless Steel (SDSS) to establish if the joint is feasible or not. The alloys were welded with GTAW process using a 60-deg and 90-deg single-V groove test specimens in order to observe the effect of the weld pass. The filler metal was chosen with the aid of Schaeffler diagram. It was found that the ER 25.10.4L filler metal provided the best equilibrium between ferrite and austenite phase in the Superduplex Stainless Steel final microstructure and a band of martensite in the HSLA steel final microstructure. The dissimilar joint presented acceptable mechanical properties which are superior to the HSLA in the as-received condition, but lower than the SDSS in the as-received condition, proving that the filler metal was the adequate.

Analysis of High-Power Diode Laser Heating Effects on HY-80 Steel for Laser Assisted Friction Stir Welding Applications

In this research, several conditions of high power diode laser heated HY-80 steel were characterized to determine the viability of using such lasers as a preheating source before friction stir welding in order to reduce frictional forces thereby reducing tool wear and increasing welding speeds. Differences in microstructures within heat affected zones were identified at specific laser powers and traverse speeds. Vickers hardness values were recorded and analyzed to validate the formation of additional martensite in diode laser heated regions of HY-80 steel. Conditions that produced little to no additional martensite were identified and relationships among high power diode laser power, traverse speed, and martensite formation were determined. The development of heat affected zones, change in grain structure, and creation of additional martensite in HY-80 can be prevented through the optimization of laser amperage and transverse speed.

Artificial Neural Network Application to the Friction Stir Welding of Al 6061 Alloy to Stainless Steel 304

The joining of a 6-mm thickness Al 6061 to Stainless steel 304 has been performed by solid state welding. A selection method of optimum friction welding condition using neural networks is proposed. The data used for analyses are the friction stir welding condition, the input parameters of the model consist of welding speed and tool rotation speed. The outputs of the ANN (Artificial Neural Network)model includes resulting parameters, namely, maximum reached temperature,and heating rate for both aluminum alloy 6061 and stainless steel 304 during friction stir welding process.The results of analysis suggest that the proposed method is an effective one to select an optimum welding condition.Good performance of the ANN model was achieved. The combined influence of welding speed and tool rotation speed on the maximum reached temperature and heating rate for both aluminum alloy 6061and stainless steel 304 friction stir welding was simulated. A comparison was made between the output of the ANN program and finite element model. The calculated results were in good agreement with that of finite element model.

Application and prospect of computer technology in welding materials field

This paper summarizes the application status of computer technology in welding materials field from three aspects: the CAD of welding materials, the date base system for welding materials and the expert system for welding materials .Besides, this paper explores and discusses the existing problems and the developing trend in the future.

A new simulation model and its application in CO_2 short-circuiting transfer welding

A new simulation model of CO 2 short circuiting transfer welding may be employed to develop a new pattern of welding machine and to predict welding process parameters to obtain the optimum welding technology properties. In this paper, a new simulating model is developed according to the AWP (adapting welding physics process) waveform control method. Good agreement is shown between the predicted and experimentally determined results. The model will make an important promotion in the development of CO 2 arc welding technique.

Application of neural networks and fuzzy control to the welding robot

Intelligent control is applied in welding robot. The neural network was used for detecting the deviation of the torch from the center of the gap. The robot tracing the welding line with the fuzzy controller. The proposed method was successfully used to seam tracking in V groove weld configuration .