A new method for the preparation of SBA-15-supported palladium catalyst for Heck reaction in supercritical carbon dioxide was presented.The newly formed SBA-15-supported palladium catalyst（Ph-SBA-15-PPh_3-Pd） exhibi...A new method for the preparation of SBA-15-supported palladium catalyst for Heck reaction in supercritical carbon dioxide was presented.The newly formed SBA-15-supported palladium catalyst（Ph-SBA-15-PPh_3-Pd） exhibited high catalytic activity for the Heck reaction of 4-nitrobromobenzene with methyl acrylate.The catalyst can be reused several times without a loss of activity.展开更多
Fluid catalytic cracking(FCC)is still a key process in the modern refining industry,in which nickel contamination of the FCC catalyst can significantly increase the dry gas and coke yields and thus seriously affect th...Fluid catalytic cracking(FCC)is still a key process in the modern refining industry,in which nickel contamination of the FCC catalyst can significantly increase the dry gas and coke yields and thus seriously affect the stability of the FCC unit.Therefore,in this work,B_(2)O_(3)-modified SBA-15 molecular sieves(B_(2)O_(3)/SBA-15)with different B_(2)O_(3) contents were prepared,characterized,and further used as matrix component in the preparation of Ni-tolerant FCC catalyst.The characterization results indicated that the B_(2)O_(3)/SBA-15 samples possessed excellent Ni passivation ability and kept the characteristic structure of the parent SBA-15 such as highly ordered mesopores,large surface area,and high pore volume,which enabled the B_(2)O_(3)/SBA-15 sample to greatly improve the Ni tolerance of the prepared FCC catalyst.The heavy oil catalytic cracking tests indicated that,under the same Ni contamination conditions,the dry gas,coke,and heavy oil yields of the FCC catalyst containing B_(2)O_(3)/SBA-15 decreased by 0.92%,1.65%,and 1.26%,respectively,compared with those of conventional FCC catalyst,while the total liquid yield increased by 3.83%.展开更多
Dielectric barrier discharge(DBD)plasma excited by a high-frequency alternating-current(AC)power supply is widely employed for the degradation of volatile organic compounds(VOCs).However,the thermal effect generated d...Dielectric barrier discharge(DBD)plasma excited by a high-frequency alternating-current(AC)power supply is widely employed for the degradation of volatile organic compounds(VOCs).However,the thermal effect generated during the discharge process leads to energy waste and low energy utilization efficiency.In this work,an innovative DBD thermally-conducted catalysis(DBD-TCC)system,integrating high-frequency AC-DBD plasma and its generated thermal effects to activate the Co/SBA-15 catalyst,was employed for toluene removal.Specifically,Co/SBA-15 catalysts are closely positioned to the ground electrode of the plasma zone and can be heated and activated by the thermal effect when the voltage exceeds 10 k V.At12.4 k V,the temperature in the catalyst zone reached 261℃ in the DBD-TCC system,resulting in an increase in toluene degradation efficiency of 17%,CO_(2)selectivity of 21.2%,and energy efficiency of 27%,respectively,compared to the DBD system alone.In contrast,the DBD thermally-unconducted catalysis(DBD-TUC)system fails to enhance toluene degradation due to insufficient heat absorption and catalytic activation,highlighting the crucial role of AC-DBD generated heat in the activation of the catalyst.Furthermore,the degradation pathway and mechanism of toluene in the DBD-TCC system were hypothesized.This work is expected to provide an energy-efficient approach for high-frequency AC-DBD plasma removal of VOCs.展开更多
The effect of sintering temperature(1073?1373 K)on the structural and tribological properties of nanostructured ballmilledβ-type Ti?15Mo samples was investigated.The prepared samples were characterized using various ...The effect of sintering temperature(1073?1373 K)on the structural and tribological properties of nanostructured ballmilledβ-type Ti?15Mo samples was investigated.The prepared samples were characterized using various apperatus such as X-ray diffractometer,scanning electron microscope(SEM)and ball-on-plate type oscillating tribometer.Wear tests were conducted under different applied loads(2,8 and 16 N).Structural results showed that the mean pore and crystallite size continuously decreased with increasing sintering temperature to reach the lowest values of 4 nm and 29 nm at 1373 K,respectively.The relative density of the sintered sample at 1373 K was as high as 97.0%.Moreover,a higher sintering temperature resulted in higher relative density,greater hardness and elastic modulus of the sample.It was observed that both the friction coefficient and wear rate were lower in the sample sintered at 1373 K which was attributed to the closed porosity.展开更多
基金National Natural Science Foundation of China(No.20603005)the Specialized Research Fund for the Doctoral Program of Higher Education(No.20090041110012) for their financial support
文摘A new method for the preparation of SBA-15-supported palladium catalyst for Heck reaction in supercritical carbon dioxide was presented.The newly formed SBA-15-supported palladium catalyst（Ph-SBA-15-PPh_3-Pd） exhibited high catalytic activity for the Heck reaction of 4-nitrobromobenzene with methyl acrylate.The catalyst can be reused several times without a loss of activity.
基金National Natural Science Foundation of China(grant number:21902008)Doctor Research Program of Shandong University of Technology(No.4041/420117).
文摘Fluid catalytic cracking(FCC)is still a key process in the modern refining industry,in which nickel contamination of the FCC catalyst can significantly increase the dry gas and coke yields and thus seriously affect the stability of the FCC unit.Therefore,in this work,B_(2)O_(3)-modified SBA-15 molecular sieves(B_(2)O_(3)/SBA-15)with different B_(2)O_(3) contents were prepared,characterized,and further used as matrix component in the preparation of Ni-tolerant FCC catalyst.The characterization results indicated that the B_(2)O_(3)/SBA-15 samples possessed excellent Ni passivation ability and kept the characteristic structure of the parent SBA-15 such as highly ordered mesopores,large surface area,and high pore volume,which enabled the B_(2)O_(3)/SBA-15 sample to greatly improve the Ni tolerance of the prepared FCC catalyst.The heavy oil catalytic cracking tests indicated that,under the same Ni contamination conditions,the dry gas,coke,and heavy oil yields of the FCC catalyst containing B_(2)O_(3)/SBA-15 decreased by 0.92%,1.65%,and 1.26%,respectively,compared with those of conventional FCC catalyst,while the total liquid yield increased by 3.83%.
基金supported by National Natural Science Foundation of China(No.52177130)the Key Projects for Industrial Prospects and Core Technology Research in Suzhou City(No.SYC2022029)。
文摘Dielectric barrier discharge(DBD)plasma excited by a high-frequency alternating-current(AC)power supply is widely employed for the degradation of volatile organic compounds(VOCs).However,the thermal effect generated during the discharge process leads to energy waste and low energy utilization efficiency.In this work,an innovative DBD thermally-conducted catalysis(DBD-TCC)system,integrating high-frequency AC-DBD plasma and its generated thermal effects to activate the Co/SBA-15 catalyst,was employed for toluene removal.Specifically,Co/SBA-15 catalysts are closely positioned to the ground electrode of the plasma zone and can be heated and activated by the thermal effect when the voltage exceeds 10 k V.At12.4 k V,the temperature in the catalyst zone reached 261℃ in the DBD-TCC system,resulting in an increase in toluene degradation efficiency of 17%,CO_(2)selectivity of 21.2%,and energy efficiency of 27%,respectively,compared to the DBD system alone.In contrast,the DBD thermally-unconducted catalysis(DBD-TUC)system fails to enhance toluene degradation due to insufficient heat absorption and catalytic activation,highlighting the crucial role of AC-DBD generated heat in the activation of the catalyst.Furthermore,the degradation pathway and mechanism of toluene in the DBD-TCC system were hypothesized.This work is expected to provide an energy-efficient approach for high-frequency AC-DBD plasma removal of VOCs.
文摘The effect of sintering temperature(1073?1373 K)on the structural and tribological properties of nanostructured ballmilledβ-type Ti?15Mo samples was investigated.The prepared samples were characterized using various apperatus such as X-ray diffractometer,scanning electron microscope(SEM)and ball-on-plate type oscillating tribometer.Wear tests were conducted under different applied loads(2,8 and 16 N).Structural results showed that the mean pore and crystallite size continuously decreased with increasing sintering temperature to reach the lowest values of 4 nm and 29 nm at 1373 K,respectively.The relative density of the sintered sample at 1373 K was as high as 97.0%.Moreover,a higher sintering temperature resulted in higher relative density,greater hardness and elastic modulus of the sample.It was observed that both the friction coefficient and wear rate were lower in the sample sintered at 1373 K which was attributed to the closed porosity.
