A Study on the Pedagogical Application of Chinese New Year Culture in International Chinese Language Education

Culture teaching is an inseparable part of International Chinese Language Education,and it has great significance in international Chinese language teaching.Students can enhance their interest in Chinese language learning and improve their learning effect through understanding the excellent traditional Chinese culture,at the same time,culture teaching can help to disseminate the Chinese culture and promote the development of a multicultural world.Taking the teaching of Chinese New Year culture as an example,we analyze the current teaching materials involving Chinese New Year culture with high popularity and acceptance,put forward effective teaching methods matching the feasibility of teaching Chinese New Year culture,and then present the specific teaching design of Chinese New Year culture,in order to provide references for the teaching of culture in International Chinese Language Education.

Drilling-based measuring method for the c-φ parameter of rock and its field application

The technology of drilling tests makes it possible to obtain the strength parameter of rock accurately in situ. In this paper, a new rock cutting analysis model that considers the influence of the rock crushing zone(RCZ) is built. The formula for an ultimate cutting force is established based on the limit equilibrium principle. The relationship between digital drilling parameters(DDP) and the c-φ parameter(DDP-cφ formula, where c refers to the cohesion and φ refers to the internal friction angle) is derived, and the response of drilling parameters and cutting ratio to the strength parameters is analyzed. The drillingbased measuring method for the c-φ parameter of rock is constructed. The laboratory verification test is then completed, and the difference in results between the drilling test and the compression test is less than 6%. On this basis, in-situ rock drilling tests in a traffic tunnel and a coal mine roadway are carried out, and the strength parameters of the surrounding rock are effectively tested. The average difference ratio of the results is less than 11%, which verifies the effectiveness of the proposed method for obtaining the strength parameters based on digital drilling. This study provides methodological support for field testing of rock strength parameters.

Photoelectrocatalytic principles for meaningfully studying photocatalyst properties and photocatalysis processes:From fundamental theory to environmental applications

Photocatalysis is critically important for environmental remediation and renewable energy technologies.The ability to objectively characterize photocatalyst properties and photocatalysis processes is paramount for meaningful performance evaluation and fundamental studies to guide the design and development of high-performance photocatalysts and photocatalysis systems.Photocatalysis is essentially an electron transfer process,and photoelectrocatalysis(PEC)principles can be used to directly quantify transferred electrons to determine the intrinsic properties of photocatalysts and photocatalysis processes in isolation,without interference from counter reactions due to physically separated oxidation and reduction half-reactions.In this review,we discuss emphatically the PEC-based principles for characterizing intrinsic properties of photocatalysts and important processes of photocatalysis,with a particular focus on their environmental applications in the degradation of pollutants,disinfection,and detection of chemical oxygen demand(COD).An outlook towards the potential applications of PEC technique is given.

Causal associations between gastroesophageal reflux disease and essential hypertension: A bidirectional Mendelian randomization study

BACKGROUND Clinical studies have reported that patients with gastroesophageal reflux disease(GERD)have a higher prevalence of hypertension.AIM To performed a bidirectional Mendelian randomization(MR)analysis to investi-gate the causal link between GERD and essential hypertension.METHODS Eligible single nucleotide polymorphisms(SNPs)were selected,and weighted median,inverse variance weighted(IVW)as well as MR egger(MR-Egger)re-gression were used to examine the potential causal association between GERD and hypertension.The MR-Pleiotropy RESidual Sum and Outlier analysis was used to detect and attempt to reduce horizontal pleiotropy by removing outliers SNPs.The MR-Egger intercept test,Cochran’s Q test and“leave-one-out”sen-sitivity analysis were performed to evaluate the horizontal pleiotropy,heterogen-eities,and stability of single instrumental variable.RESULTS IVW analysis exhibited an increased risk of hypertension(OR=1.46,95%CI:1.33-1.59,P=2.14E-16)in GERD patients.And the same result was obtained in replication practice(OR=1.002,95%CI:1.0008-1.003,P=0.000498).Meanwhile,the IVW analysis showed an increased risk of systolic blood pressure(β=0.78,95%CI:0.11-1.44,P=0.021)and hypertensive heart disease(OR=1.68,95%CI:1.36-2.08,P=0.0000016)in GERD patients.Moreover,we found an decreased risk of Barrett's esophagus(OR=0.91,95%CI:0.83-0.99,P=0.043)in essential hypertension patients.CONCLUSION We found that GERD would increase the risk of essential hypertension,which provided a novel prevent and therapeutic perspectives of essential hypertension.

Effects of the combined application of organic and chemical nitrogen fertilizer on soil aggregate carbon and nitrogen:A 30-year study

To understand the long-term effects of combined organic and chemical nitrogen fertilization on soil organic C(SOC) and total N(TN), we conducted a 30-year field experiment with a wheat–maize rotation system on the Huang-HuaiHai Plain during 1990–2019. The experimental treatments consisted of five fertilizer regimes: no fertilizer(control), chemical fertilizer only(NPK), chemical fertilizer with straw(NPKS), chemical fertilizer with manure(NPKM), and 1.5 times the rate of NPKM(1.5NPKM). The NPK, NPKS, and NPKM treatments had equal N inputs. The crop yields were measured over the whole experimental duration. Soil samples were collected from the topsoil(0–10 and 10–20 cm) and subsoil(20–40 cm) layers for assessing soil aggregates and taking SOC and TN measurements. Compared with the NPK treatment, the SOC and TN contents increased significantly in both the topsoil(24.1–44.4% for SOC and 22.8–47.7% for TN) and subsoil layers(22.0–47.9% for SOC and 19.8–41.8% for TN) for the organically amended treatments(NPKS, NPKM and 1.5NPKM) after 30 years, while no significant differences were found for the average annual crop yields over the 30 years of the experiment. The 0–10 cm layer of the NPKS treatment and the 20–40 cm layer of the NPKM treatment had significantly higher macroaggregate fraction mass proportions(19.8 and 27.0%) than the NPK treatment. However, the 0–10 and 20–40 cm layers of the 1.5NPKM treatment had significantly lower macroaggregate fraction mass proportions(–19.2 and –29.1%) than the control. The analysis showed that the higher SOC and TN in the soil of organically amended treatments compared to the NPK treatment were related to the increases in SOC and TN protected in the stable fractions(i.e., free microaggregates and microaggregates within macroaggregates), in which the contributions of the stable fractions were 81.1–91.7% of the increase in SOC and 83.3–94.0% of the increase in TN, respectively. The relationships between average C inputs and both stable SOC and TN stocks were significantly positive with R2 values of 0.74 and 0.72(P<0.01) for the whole 40 cm soil profile, which indicates the importance of N for soil C storage. The results of our study provide key evidence that long-term combined organic and chemical nitrogen fertilization, while maintaining reasonable total N inputs, benefited soil C and N storage in both the topsoil and subsoil layers.

Recent progresses in the development of tubular segmented-in-series solid oxide fuel cells:Experimental and numerical study

Solid oxide fuel cells(SOFCs)have attracted a great deal of interest because they have the highest efficiency without using any noble metal as catalysts among all the fuel cell technologies.However,traditional SOFCs suffer from having a higher volume,current leakage,complex connections,and difficulty in gas sealing.To solve these problems,Rolls-Royce has fabricated a simple design by stacking cells in series on an insulating porous support,resulting in the tubular segmented-in-series solid oxide fuel cells(SIS-SOFCs),which achieved higher output voltage.This work systematically reviews recent advances in the structures,preparation methods,perform-ances,and stability of tubular SIS-SOFCs in experimental and numerical studies.Finally,the challenges and future development of tubular SIS-SOFCs are also discussed.The findings of this work can help guide the direction and inspire innovation of future development in this field.

Functionality of Covalent Organic Framework (COF) in Gas Storage Application: First Principal Study

Industrial growth in recent years led to air pollution and an increase in concentration of hazardous gases such as O3 and NO. Developing new materials is important to detect and reduce air pollutants. While catalytic decomposition and zeolites are traditional ways used to reduce the amount of these gases. We need to develop and explore new promising materials. Covalent organic framework (COF) has become an attractive platform for researcher due to its extended robust covalent bonds, porosity, and crystallinity. In this study, first principal calculations were performed for gases adsorption using COFs containing nitrogen and π-bonds. Different building blocks (BBs) and linkers (LINKs/LINK1 & LINK2) were investigated by means of density functional theory (DFT) calculations with B3LYP and 3-21G basis sets to calculate the binding energies of gases @COF systems. Electrostatic potential maps (ESPM), Mulliken charges and non-covalent interaction (NCI) are used to understand the type of interactions between gas and COFs fragments. O3 was found to bind strongly with COF system in comparison with NO which could make COF a useful selective material for mixed gases environment for sensing and removal application.

Pharmacodynamic Study of Parallel Groups Comparing the Effect of Rivaroxaban 20 Mg (Laboratorios Leti, S.A.V.) vs Rivaroxaban 20 Mg (Bayer Laboratories) on Prothrombin Time

Background: The prevalence of both atrial fibrillation (FA) and diabetes mellitus (DM) is increasing and they often occur together and constitute a high risk of thrombosis. Rivaroxaban is a Factor Xa inhibitor with a rapid onset and disappearance of action after oral administration;it acts by inhibiting the active form of the coagulation factor. In order to reflect the effect of the action of Rivaroxaban, we used the prothrombin time (PT);however, it′s not the most accurate, but it is the one available in our community. Methods: This was a prospective, randomized, analyst-blinded, parallel group clinical study to verify the efficacy of Rivaroxaban Leti 20 mg (RL) (12 volunteers vs Rivaroxaban Bayer 20 mg (RB) (13 volunteers). The variables were determination of PT and Partial Thromboplastin Time (aPTT) at baseline and at 24, 48 and 72 hours after administering a daily dose of 20 mg for three days. The determination was carried out with the IDG method (Integrated Diagnostics Group Sanzay Corporation) with an International Sensitivity Index (ISI) of 1.17 PT and aPTT were taken before the first dose, and then, every day during the next 3 days, three hours after the ingestion of their daily dose at 7 am. Results: The 25 healthy volunteers were similar in age, BMI, and SBP/DBP level with a greater number of men in the Bayer group. The efficacy of rivaroxaban was similar in both groups with prolongation of PTT to the 2nd day of treatment with PT, and percentage changes from baseline (14.46 ± 0.97 for RB vs 14.17 ± 0.94 RL p: 0.45), PTT results and percentage changes from the base (RB: 34 ± 4.53 RL: 33.46 ± 2.82). The safety of rivaroxaban was good in both groups with no serious adverse events. The equivalence in the logarithmically transformed PT result (ln) on day two, Mean and CI (90%) 99.2 (94.4-104) and 100 (99.5-100.8);neither the means nor the 90% confidence intervals of the PT variable transformed logarithmically to ensure its normality, were far from the 80%-125% allowed for declaration of similarity. Conclusion: The test formulation Rivaroxaban Asarap? 20 mg, manufactured by Leti Laboratories, is interchangeable or bioequivalent in clinical and laboratory response to the reference formulation Xarelto? manufactured by Bayer Laboratories.

Heating of nanoparticles and their environment by laser radiation and applications

This review considers the fundamental dynamic processes involved in the laser heating of metal nanoparticles and their subsequent cooling.Of particular interest are the absorption of laser energy by nanoparticles,the heating of a single nanoparticle or an ensemble thereof,and the dissipation of the energy of nanoparticles due to heat exchange with the environment.The goal is to consider the dependences and values of the temperatures of the nanoparticles and the environment,their time scales,and other parameters that describe these processes.Experimental results and analytical studies on the heating of single metal nanoparticles by laser pulses are discussed,including the laser thresholds for initiating subsequent photothermal processes,how temperature influences the optical properties,and the heating of gold nanoparticles by laser pulses.Experimental studies of the heating of an ensemble of nanoparticles and the results of an analytical study of the heating of an ensemble of nanoparticles and the environment by laser radiation are considered.Nanothermometry methods for nanoparticles under laser heating are considered,including changes in the refractive indices of metals and spectral thermometry of optical scattering of nanoparticles,Raman spectroscopy,the thermal distortion of the refractive index of an environment heated by a nanoparticle,and thermochemical phase transitions in lipid bilayers surrounding a heated nanoparticle.Understanding the sequence of events after radiation absorption and their time scales underlies many applications of nanoparticles.The applicationfields for the laser heating of nanoparticles are reviewed,including thermochemical reactions and selective nanophotothermolysis initiated in the environment by laser-heated nanoparticles,thermal radiation emission by nanoparticles and laser-induced incandescence,electron and ion emission of heated nanoparticles,and optothermal chemical catalysis.Applications of the laser heating of nanoparticles in laser nanomedicine are of particular interest.Significant emphasis is given to the proposed analytical approaches to modeling and calculating the heating processes under the action of a laser pulse on metal nanoparticles,taking into account the temperature dependences of the parameters.The proposed models can be used to estimate the parameters of lasers and nanoparticles in the various applicationfields for the laser heating of nanoparticles.

Combined application of CIRCLE Software and Topo-LASIK for SMILE enhancement

Dear Editor,We present a case of combined application of CIRCLE software(Carl Zeiss Meditec AG,Germany)and topography-guided laser-assisted in situ keratomileusis(Topo-LASIK)for small-incision lenticule extraction(SMILE)enhancement.SMILE is a safe,minimally invasive corneal laser surgery using a femtosecond laser to create an extractable stromal lenticule.

Dyslipidemia in Adults with Type 2 Diabetes in a Rural Community in Ganadougou, Mali: A Cross-Sectional Study

Dyslipidemia is a disorder where abnormally lipid concentrations circulate in the bloodstream. The disorder is common in type 2 diabetics (T2D) and is linked with T2D comorbidities, particularly cardiovascular disease. Dyslipidemia in T2D is typically characterized by elevated plasma triglyceride and low high-density lipoprotein cholesterol (HDL-C) levels. There is a significant gap in the literature regarding dyslipidemia in rural parts of Africa, where lipid profiles may not be captured through routine surveillance. This study aimed to characterize the prevalence and demo-graphic profile of dyslipidemia in T2D in the rural community of Ganadougou, Mali. We performed a cross-sectional study of 104 subjects with T2D in Ganadougou between November 2021 and March 2022. Demographic and lipid profiles were collected through cross-sectional surveys and serological analyses. The overall prevalence of dyslipidemia in T2D patients was 87.5% (91/104), which did not differ by sex (P = .368). High low-density lipoprotein cholesterol (LDL-C) was the most common lipid abnormality (78.9%, [82/104]). Dyslipidemia was associated with age and hypertension status (P = .013 and.036, respectively). High total and high LDL-C parameters were significantly associated with hypertension (P = .029 and .006, respectively). In low-resource settings such as rural Mali, there is a critical need to improve infrastructure for routine dyslipidemia screening to guide its prevention and intervention approaches. The high rates of dyslipidemia observed in Gandadougou, consistent with concomitant increases in cardiovascular diseases in Africa suggest that lipid profile assessments should be incorporated into routine medical care for T2D patients in African rural settings.

Ganoderma lucidum:a comprehensive review of phytochemistry,efficacy,safety and clinical study

Ganoderma lucidum,one of the most well-known edible fungi,is believed to be very beneficial for longevity and vitality.A long usage history suggests that G.lucidum has various clinical therapeutic effects.And experimental studies have confirmed that G.lucidum has multiple pharmacological effects,including antitumor,anti-microbial,anti-HIV protease,and antidiabetic activity and so on.With the deepening of research,more than 300 compounds have been isolated from G.lucidum.There is an increasing population of G.lucidum-based products,and its international development is expanding.Currently,G.lucidum has drawn much attention to its chemical composition,therapeutic effect,clinical value,and safety.This paper provides a comprehensive review of these aspects to enhance the global promotion of G.lucidum.

Mental health and insomnia problems in healthcare workers after the COVID-19 pandemic:A multicenter cross-sectional study

BACKGROUND Healthcare workers(HCWs)are at increased risk of contracting coronavirus disease 2019(COVID-19)as well as worsening mental health problems and insomnia.These problems can persist for a long period,even after the pandemic.However,less is known about this topic.AIM To analyze mental health,insomnia problems,and their influencing factors in HCWs after the COVID-19 pandemic.METHODS This multicenter cross-sectional,hospital-based study was conducted from June 1,2023 to June 30,2023,which was a half-year after the end of the COVID-19 emergency.Region-stratified population-based cluster sampling was applied at the provincial level for Chinese HCWs.Symptoms such as anxiety,depression,and insomnia were evaluated by the Generalized Anxiety Disorder-7,Patient Health Questionnaire-9,and Insomnia Severity Index.Factors influencing the symptoms were identified by multivariable logistic regression.RESULTS A total of 2000 participants were invited,for a response rate of 70.6%.A total of 1412 HCWs[618(43.8%)doctors,583(41.3%)nurses and 211(14.9%)nonfrontline],254(18.0%),231(16.4%),and 289(20.5%)had symptoms of anxiety,depression,and insomnia,respectively;severe symptoms were found in 58(4.1%),49(3.5%),and 111(7.9%)of the participants.Nurses,female sex,and hospitalization for COVID-19 were risk factors for anxiety,depression,and insomnia symptoms;moreover,death from family or friends was a risk factor for insomnia symptoms.During the COVID-19 outbreak,most[1086(76.9%)]of the participating HCWs received psychological interventions,while nearly all[994(70.4%)]of them had received public psychological education.Only 102(7.2%)of the HCWs received individual counseling from COVID-19.CONCLUSION Although the mental health and sleep problems of HCWs were relieved after the COVID-19 pandemic,they still faced challenges and greater risks than did the general population.Identifying risk factors would help in providing targeted interventions.In addition,although a major proportion of HCWs have received public psychological education,individual interventions are still insufficient.

A Review of Contact Electrification at Diversified Interfaces and Related Applications on Triboelectric Nanogenerator

The triboelectric nanogenerator(TENG)can effectively collect energy based on contact electrification(CE)at diverse interfaces,including solid–solid,liquid–solid,liquid–liquid,gas–solid,and gas–liquid.This enables energy harvesting from sources such as water,wind,and sound.In this review,we provide an overview of the coexistence of electron and ion transfer in the CE process.We elucidate the diverse dominant mechanisms observed at different interfaces and emphasize the interconnectedness and complementary nature of interface studies.The review also offers a comprehensive summary of the factors influencing charge transfer and the advancements in interfacial modification techniques.Additionally,we highlight the wide range of applications stemming from the distinctive characteristics of charge transfer at various interfaces.Finally,this review elucidates the future opportunities and challenges that interface CE may encounter.We anticipate that this review can offer valuable insights for future research on interface CE and facilitate the continued development and industrialization of TENG.

Potential industrial applications of photo/electrocatalysis: Recent progress and future challenges

Nowadays,the rapid development of the social economy inevitably leads to global energy and environmental crisis.For this reason,more and more scholars focus on the development of photocatalysis and/or electrocatalysis technology for the advantage in the sustainable production of high-value-added products,and the high efficiency in pollutants remediation.Although there is plenty of outstanding research has been put forward continuously,most of them focuses on catalysis performance and reaction mechanisms in laboratory conditions.Realizing industrial application of photo/electrocatalytic processes is still a challenge that needs to be overcome by social demand.In this regard,this review comprehensively summarized several explorations in thefield of photo/electrocatalytic reduction towards potential industrial applications in recent years.Special attention is paid to the successful attempts and the current status of photo/electrocatalytic water splitting,carbon dioxide conversion,resource utilization from waste,etc.,by using advanced reactors.The key problems and challenges of photo/electrocatalysis in future industrial practice are also discussed,and the possible development directions are also pointed out from the industry view.

The growth ofβphase in Mg-Gd-Y-Ni alloy by experimental and first-principles study

The paper reports on the atomic investigation aboutβphase in Mg_(96)Gd_(2)Y_(1)Ni_(1) alloy by using the first-principles study and the high-angle annular dark-field scanning transmission electron microscope(HAADF-STEM)corrected by atomic Cs.By using HAADF-STEM,the rectangularβphases were observed in the underage and peak aging stages in Mg_(96)Gd_(2)Y_(1)Ni_(1) alloy.Theβphase could be precipitated from the previously precipitatedβphase,and theβphase grew in steps when it was precipitated.A special transition structure of three atomic layer thicknesses was first observed at the edge of theβphase and the structure of this interface is probably as theβ/Mg_(1) interface for the analysis of thermodynamic characterization and electronic characterization.Theβ'phase and theβ_(H) structure were precipitated only at the edge of the length directions of theβphase.Theβ'phase continues to grow into aβphase directly without the formation ofβ_(1) phase,resulting in an increase in the length of theβphase,which is discovered for the first time.

Pharmacokinetics and Bioequivalence of Dienogest in Healthy Bangladeshi Female Volunteers: An Open-Label, Single-Dose, Randomized, Two-Way Crossover Study

Background: Dienogest is a potential treatment for pelvic pain associated with endometriosis, a condition of significant concern in gynaecology. The current study was conducted as a crossover-randomized bioequivalence assessment of two oral Dienogest 2 mg formulations, aiming to provide valuable insights for healthcare professionals and researchers in this field. Objective: The primary aim of this research was to evaluate and compare the pharmacokinetic characteristics of Dienogest 2 mg tablets. Dinogest (Dienogest 2 mg) tablets, manufactured by Nuvista Pharma Limited in Bangladesh, and Visanne (Dienogest 2 mg) tablets, manufactured by Bayer Pharma in Germany, were the test and reference formulations, respectively. Materials and Method: The study was an open-label, balanced, randomized, two treatments, two sequences, two periods, two-way crossover, laboratory blind, single oral dose bioequivalence study conducted in healthy adult females under fasting conditions. The study was carried out on 13 healthy, non-pregnant female subjects, and all the subjects completed both study periods with a 15-day washout in between. Randomization was used to assign the test and reference formulations to the subjects. Following each oral administration, a series of blood samples were obtained at different time intervals from pre-dose to 72 hours post-dose and analyzed for Dienogest concentrations using a validated bio-analytical method. A standard non-compartmental model was used to analyze the pharmacokinetic parameters. The primary pharmacokinetic parameters were peak plasma drug concentration (Cmax), the area under the plasma concentration-time curve from time zero to time t (AUC0–t), and AUC from t = 0 to infinity (AUC0–∞). The other PK parameters included time to reach Cmax (Tmax), terminal elimination rate constant (Kel), and half-life (t1/2). Result: The ratios and 90% CI for the geometric mean test/reference were 95.53% (86.70% - 105.26%) for Cmax, 101.75% (95.42% - 108.49%) for AUC0−t, and 101.54% (95.59%% - 107.87%) for AUC0−∞. The formulations were bioequivalent since the 90% CIs for the geometric mean test/reference ratios were 80% to 125%, according to the predetermined range of US Food and Drug Administration (FDA) requirements. Conclusion: This single-dose investigation shows that the Dienogest test and reference formulations exhibited a rate and degree of absorption that met the regulatory requirements for bioequivalence.

Spatiotemporal variations of sand hydraulic conductivity by microbial application methods

The spatiotemporal distributions of microbes in soil by different methods could affect the efficacy of the microbes to reduce the soil hydraulic conductivity.In this study,the specimens of bio-mediated sands were prepared using three different methods,i.e.injecting,mixing,and pouring a given microbial so-lution onto compacted sand specimens.The hydraulic conductivity was measured by constant-head tests,while any soil microstructural changes due to addition of the microbes were observed by scan-ning electron microscope(SEM)and mercury intrusion porosimetry(MIP)tests.The amount of dextran concentration produced by microbes in each type of specimen was quantified by a refractometer.Results show that dextran production increased exponentially after 5-7 d of microbial settling with the supply of culture medium.The injection and mixing methods resulted in a similar amount and uniform dis-tribution of dextran in the specimens.The pouring method,however,produced a nonuniform distri-bution,with a higher concentration near the specimen surface.As the supply of culture medium discontinued,the dextran content near the surface produced by the pouring method decreased dramatically due to high competition for nutrients with foreign colonies.Average dextran concentration was negatively and correlated with hydraulic conductivity of bio-mediated soils exponentially,due to the clogging of large soil pores by dextran.The hydraulic conductivity of the injection and mixing cases did not change significantly when the supply of culture medium was absent.

Prevalence of retinal pathologies in people over 60 years:the Tehran Geriatrics Eye Study

AIM:To determine the prevalence of some retinal pathologies in people over 60y and their association with demographic and ocular factors.METHODS:A cross-sectional study was conducted in Tehran using multistage cluster sampling.After selecting subjects aged 60 and over,optometric,and ophthalmic examinations were done.For retinal examination,a 90 D lens was used and indirect ophthalmoscopy was performed after instilling tropicamide drops.Biometry was done using the IOL Master for all participants.RESULTS:Of 3791 people that were invited through cluster sampling,3310 participated in the study(response rate=82%).The prevalence of retinal pigmented epithelium(RPE)change,drusen,geographic atrophy(GA),hypertensive retinopathy(HTR),nonproliferative diabetic retinopathy(NPDR),proliferative diabetic retinopathy(PDR),choroidal neovascularization(CNV),central retinal artery occlusion(CRAO),myopic retinopathy(MR),branch retinal vein occlusion(BRVO),and central retinal vein occlusion(CRVO)was 27.42%,11.08%,4.52%,3.03%,4.05%,0.54%,0.82%,0.39%,0.20%,0.49%,and 0.19%,respectively.After removing the effect of age,the odds of NPDR were 1.68 times higher in women compared to men(P=0.014).After removing the effect of sex,the odds of drusen,RPE change,GA,CNV,BRVO,and CRVO increased with age.CONCLUSION:There is a higher prevalence of RPE change,drusen,GA,CNV and a lower prevalence of MR and CRAO in the elderly population of Tehran aged over 60y compared to global average values.Considering the correlation of most of the diseases with age and their effects on vision,attention should be paid to these diseases and the related screening programs to prevent vision impairment.

MXenes: Versatile 2D materials with tailored surface chemistry and diverse applications

MXenes,the most recent addition to the 2D material family,have attracted significant attention owing to their distinctive characteristics,including high surface area,conductivity,surface characteristics,mechanical strength,etc.This review begins by presenting MXenes,providing insights into their structural characteristics,synthesis methods,and surface functional groups.The review covers a thorough analysis of MXene surface properties,including surface chemistry and termination group impacts.The properties of MXenes are influenced by their synthesis,which can be fluorine-based or fluorinedependent.Fluorine-based synthesis techniques involve etching with fluorine-based reagents,mainly including HF or LiF/HCl,while fluorine-free methods include electrochemical etching,chemical vapor deposition(CVD),alkaline etching,Lewis acid-based etching,etc.These techniques result in the emergence of functional groups such as-F,-O,-OH,-Cl,etc.on the MXenes surface,depending on the synthesis method used.Properties of MXenes,such as electrical conductivity,electronic properties,catalytic activity,magnetic properties,mechanical strength,and chemical and thermal stability,are examined,and the role of functional groups in determining these properties is explored.The review delves into the diverse applications of MXenes,encompassing supercapacitors,battery materials,hydrogen storage,fuel cells,electromagnetic interference(EMI) shielding,pollutant removal,water purification,flexible electronics,sensors,additive manufacturing,catalysis,biomedical and healthcare fields,etc.Finally,this article outlines the challenges and opportunities in the current and future development of MXenes research,addressing various aspects such as synthesis scalability,etching challenges,and multifunctionality,and exploring novel applications.The review concludes with future prospects and conclusions envisioning the impact of MXenes on future technologies and innovation.