Effects of surface finish and treatment on the fatigue behaviour of vibrating cylinder block using frequency response approach

This paper presents the effects of surface finish and treatment on the high cycle fatigue behaviour of vibrating cylinder block of a new two-stroke free piston engine at complex variable amplitude loading conditions using frequency response approach. Finite element modelling and frequency response analysis was conducted using finite element analysis software Package MSC.PATRAN/MSC.NASTRAN and fatigue life prediction was carded out using MSC.FATIGUE software. Based on the finite element results, different frequency response approach was applied to predict the cylinder block fatigue life. Results for different load histories and material combinations are also discussed. Results indicated great effects for all surface finish and treatment. It is concluded that polished and cast surface finish conditions give the highest and lowest cylinder block lives, respectively; and that Nitrided treatment leads to longest cylinder block life. The results were used to draw contour plots of fatigue life and damage in the worst or most damaging case.

FIRST LANGUAGE ACQUISITION AS A MODEL FOR SECOND LANGUAGE ACQUISITION: THE TOTAL PHYSICAL RESPONSE APPROACH IN SECOND LANGUAGE LEARNING AND TEACHING

L1 and L2 acquisition, in some respects, are similar. Language development in children goes hand in hand with physical and cognitive development. Children learn their first language by imitation, but not always and not only by imitation. There seems to be some "innate capacities" that make children start to speak at the same time they do and in the way they do it. Adults learning a second language usually are controlled more by their motivation. But language input is important for both L1 and L2 acquisition. Though there are differences between CL1 and between CL2 and AL2, the way in which these learners acquire some of the grammatical morphemes is similar. This, together with some other evidence, shows that it is not only children who can acquire language. Adults can also acquire a language. But when adults acquire a language, they should also learn it. Some of the ways in which children acquire their language can be used as a model for L2 acquisition, even for Chinese students whose language is unrelated to English and whose culture is different. Learning the culture of the English-speaking countries will benefit the learning of the language. Like children, listening should also be well in advance of speaking in L2 acquisition. To train listening comprehension skills, Asher’s TPR approach proves more effective. TPR approach is at the moment limited to the beginning stage only. In order for students to gain all the five skills in a second language learning, namely, listening, speaking, reading, writing, and interpreting/translating, other methods should be used at the same time, or at later stages.

Parameter identification and global sensitivity analysis of Xin'anjiang model using meta-modeling approach

Parameter identification, model calibration, and uncertainty quantification are important steps in the model-building process, and are necessary for obtaining credible results and valuable information. Sensitivity analysis of hydrological model is a key step in model uncertainty quantification, which can identify the dominant parameters, reduce the model calibration uncertainty, and enhance the model optimization efficiency. There are, however, some shortcomings in classical approaches, including the long duration of time and high computation cost required to quantitatively assess the sensitivity of a multiple-parameter hydrological model. For this reason, a two-step statistical evaluation framework using global techniques is presented. It is based on （1） a screening method （Morris） for qualitative ranking of parameters, and （2） a variance-based method integrated with a meta-model for quantitative sensitivity analysis, i.e., the Sobol method integrated with the response surface model （RSMSobol）. First, the Morris screening method was used to qualitatively identify the parameters＇ sensitivity, and then ten parameters were selected to quantify the sensitivity indices. Subsequently, the RSMSobol method was used to quantify the sensitivity, i.e., the first-order and total sensitivity indices based on the response surface model （RSM） were calculated. The RSMSobol method can not only quantify the sensitivity, but also reduce the computational cost, with good accuracy compared to the classical approaches. This approach will be effective and reliable in the global sensitivity analysis of a complex large-scale distributed hydrological model.

Breed and adaptive response modulate bovine peripheral blood cells＇ transcriptome

Background： Adaptive response includes a variety of physiological modifications to face changes in external or internal conditions and adapt to a new situation. The acute phase proteins（APPs） are reactants synthesized against environmental stimuli like stress, infection, inflammation.Methods： To delineate the differences in molecular constituents of adaptive response to the environment we performed the whole-blood transcriptome analysis in Italian Holstein（IH） and Italian Simmental（IS） breeds. For this, 663 IH and IS cows from six commercial farms were clustered according to the blood level of APPs. Ten extreme individuals（five APP＋ and APP-variants） from each farm were selected for the RNA-seq using the Illumina sequencing technology. Differentially expressed（DE） genes were analyzed using dynamic impact approach（DIA）and DAVID annotation clustering. Milk production data were statistically elaborated to assess the association of APP＋ and APP-gene expression patterns with variations in milk parameters.Results： The overall de novo assembly of cDNA sequence data generated 13,665 genes expressed in bovine blood cells. Comparative genomic analysis revealed 1,152 DE genes in the comparison of all APP＋ vs. all APP-variants; 531 and 217 DE genes specific for IH and IS comparison respectively. In all comparisons overexpressed genes were more represented than underexpressed ones. DAVID analysis revealed 369 DE genes across breeds, 173 and 73 DE genes in IH and IS comparison respectively. Among the most impacted pathways for both breeds were vitamin B6 metabolism, folate biosynthesis, nitrogen metabolism and linoleic acid metabolism.Conclusions： Both DIA and DAVID approaches produced a high number of significantly impacted genes and pathways with a narrow connection to adaptive response in cows with high level of blood APPs. A similar variation in gene expression and impacted pathways between APP＋ and APP-variants was found between two studied breeds. Such similarity was also confirmed by annotation clustering of the DE genes. However, IH breed showed higher and more differentiated impacts compared to IS breed and such particular features in the IH adaptive response could be explained by its higher metabolic activity. Variations of milk production data were significantly associated with APP＋ and APP-gene expression patterns.

Understanding Plant Development and Stress Responses through Integrative Approaches

As the name reflects, integrative plant biology is the core topic of JIPB. In the past few years JIPB has been pursuing the development of this area, to assist the scientific community to bring together all possible research tools to understand plant growth, development and stress responses in micro- and macro-scales. As part of these efforts, JIPB and Yantai University organized the 1st International Symposium on Integrative Plant Biology in the seaside town of Yantai during August 10-12, 2009 （Figure 1） The symposium was co-sponsored by Botanical Society of China, Chinese Society for Cell Biology, Genetics Society of China, and Chinese Society for Plant Physiology.

Digital imaging approaches for phenotyping whole plant nitrogen and phosphorus response in Brachypodium distachyon

This work evaluates the phenotypic response of the model grass （Brachypodium distacbyon （L.） P. Beauv.） to nitrogen and phosphorus nutrition using a combination of imaging techniques and destructive harvest of shoots and roots. Reference line Bd21-3 was grown in pots using 11 phosphorus and 11 nitrogen concentrations to establish a dose-response curve. Shoot biovolume and biomass, root length and biomass, and tissue phosphorus and nitrogen concentrations increased with nutrient concentration. Shoot biovolume, estimated by imaging, was highly correlated with dry weight （R2 〉 0.92） and both biovolume and growth rate responded strongly to nutrient availability. Higher nutrient supply increased nodal root length more than other root types. Photochemical efficiency was strongly reduced by low phosphorus concentrations as early as 1 week after germination, suggesting that this measurement may be suitable for high throughput screening of phosphorus response. In contrast, nitrogen concentration had little effect on photochemical efficiency. Changes in biovolume over time were used to compare growth rates of four accessions in response tonitrogen and phosphorus supply. We demonstrate that a time series image-based approach coupled with mathematical modeling provides higher resolution of genotypic response to nutrient supply than traditional destructive techniques and shows promise for high throughput screening and determina- tion of genomic regions associated with superior nutrient use efficiency.

Detailed parametric design methodology for hydrodynamics of liquid-solid circulating fluidized bed using design of experiments

A design-of-experiments methodology is used to develop a statistical model for the prediction of the hydrodynamics of a liquid–solid circulating fluidized bed. To illustrate the multilevel factorial design approach, a step by step methodology is taken to study the effects of the interactions among the independent factors considered on the performance variables. A multilevel full factorial design with three levels of the two factors and five levels of the third factor has been studied. Various statistical models such as the linear, two-factor interaction, quadratic, and cubic models are tested. The model has been developed to predict responses, viz., average solids holdup and solids circulation rate. The validity of the developed regression model is verified using the analysis of variance. Furthermore, the model developed was compared with an experimental dataset to assess its adequacy and reliability. This detailed statistical design methodology for non-linear systems considered here provides a very important tool for design and optimization in a cost-effective approach