Numerical simulations of rip currents off arc-shaped coastlines

The rip currents induced by waves off arc-shaped coastlines are seriously harmful to humans, but understanding of their characteristics is lacking. In this study, the FUNWAVE model was used to calculate the wave-induced currents in the Haller experiment and the ideal arc-shaped coast similar to Sanya Dadonghai, Hainan Province,China. The results showed that the FUNWAVE model has considerable ability to simulate the rip currents, and it was used to further simulate rip currents off arc-shaped coastlines to investigate their characteristics. The rip currents were found to be stronger as the curvature of arc-shaped coastline increased. Coastal beach slope exerts a significant influence on rip currents; in particular, an overly steep or overly mild slope is not conducive to creating rip currents. Furthermore, the rip currents were found to become weaker as the size of arc-shaped coast decreased. When the height and period of waves increase, the strength of rip currents also increases, and, in some cases, wave heights of 0.4 m may produce dangerous rip currents.

The Origins of the Arc-Shaped Langshan Uplift and Linhe Trench

In the northern part of the Ordos Basin, there is a 325 km long arc-shaped Langshan uplift and a 15 km-deep Linhe Trench in front of Langshan, which are rare geological phenomena for which origins no one has explained. This article comprehensively analyzes the research achievements over the past 40 years of geology, geomorphology, seismic exploration, paleogeography, and oil and gas exploration in the Ordos Basin and Langshan. It recognizes that the northern part of the Ordos Basin experienced a meteorite impact in the Late Cretaceous period. The impact pushed the block northwest ward, subducting after colliding with igneous rocks in the north. This sudden event formed a clear arc-shaped mountain zone in the north and a wedge-shaped trench in front of the mountain. The chaotic layers, prolonged and continuous faults, and numerous thrust layers in the Langshan, a negative anomaly area in the center of the northern Ordos, abnormal orientation of crystalline basement structures in the north of Ordos, Moho uplift, and distribution of meteorite fragments in the northwest of Langshan, all of these geological phenomena support the occurrence of the meteorite impact event, forming the arc-shaped Langshan and the Trench.

Response characteristics of beach morphologies in an arc-shaped coast to typhoon waves

High waves and storm surges caused by typhoon(or storm)are the disaster eventsfor the serious erosion in coasts,to which scientists have paid close attention.However,there have been little report on the response processes of the beach morphologiesin different sections of the arc-shaped coast to such calamities.A sequence of beachchanges that were measured in the field during the Typhoon 8616 at the arc-shaped coastof the Shuidong in Guangdong Province,South China is analyzed in this note.

Contribution of GIS to Soil Landscape Mapping by Multi-Criteria Analysis Using Weighting: The Case of the Square Degrees of M’Bahiakro (Centre) and Daloa (Centre-West) in Ivory Coast

As part of the drive to improve coffee and cocoa production in Ivory Coast, studies are carried out to identify soils that are favourable for these crops. It is therefore necessary to orientate soil investigations based on reliable criteria that best discriminate soil cover. With this in mind, this study is being carried out to help improve survey methods by mapping soil landscapes. It uses GIS and weighted multicriteria analysis. To do this, satellite images were processed and the geological map of the square degrees of M’Bahiakro and Daloa was reclassified. The results show that relief is the main factor in soil landscape differentiation, with respective weights of 0.58 and 0.67 for the forest and pre-forest zones. In contrast, the weight of geological formation in soil landscape differentiation remains low (0.05 for the forest zone and 0.07 for the pre-forest zone). The criteria used on the base of aggregation sum methods have made it possible to formulate soil landscape mapping prediction functions according to agro-ecological environments in the humid intertropical zone. This is essential for the orientation of soil survey work. Nevertheless, other comparative methods, such as the coding mapping method, could provide elements for discussion to validate the models.

Micropenis Associated or Not with Cryptorchidism in the Endocrinology Department of Yopougon University Hospital in Ivory Coast: Epidemiological, Clinical, Paraclinical and Therapeutic Aspects

Background: Congenital malformations such as micropenis and cryptorchidism do not have immediate dramatic consequences. However, the diagnosis is often unknown at birth, and therefore late. In Ivory Coast, there are few studies on cryptorchidism and micropenis. We conducted this study to identify the epidemiological, clinical, etiological and therapeutic characteristics of the micropenis associated or not with cryptorchidism at Yopougon University Hospital. Methods: We conducted a retrospective descriptive study in the Department of Endocrinology-Diabetology of the Yopougon University Hospital carried out over 13 years from January 2005 to December 2018. All patients were included regardless of the presence of a micropenis associated or not with cryptorchidism in the clinical or paraclinical examination. Results: A total of 14 micropenis were reported associated in 6 cases with cryptorchidism. It was unilateral cryptorchidism in 4 patients or 66.66% of cases. The average age of affected patients was 21.32 years with extremes ranging from 10 months to 48 years. The reason for consultation was micropenis in 12 out of 14 cases or 85.75%. The associated signs apart from cryptorchidism were obesity in 42.86% of cases, gynecomastia in 35.71% of cases. The aetiology was dominated by idiopathic causes. Treatment with testosterone enanthate was more effective in pre-pubertal children than in adults. Conclusion: The diagnosis of micropenis associated or not with cryptorchidism is late because of the frustrations, taboos and psycho-social states that it causes. However, drug treatment is effective when treatment is started early.

Response of the Maize Variety EV87-28 to a Fertilization Strategy Involving Indorama Granular Urea on Ferralsol in the Central Ivory Coast

In Côte d’Ivoire, the decline in soil fertility strongly impacts the productivity of maize (Zea mays L.) on heavily leached ferralitic soil. In this study, the general objective was therefore to improve the productivity of maize EV87-28 on the Ferralsols in pre-forested areas during different cropping seasons. Eight (8) micro-plots were set up according to a total randomization device with three repetitions. Two factors were studied: nitrogen fertilizer modalities (main factor) and crop season (secondary factor). Growth, flowering and yield parameters were measured and analyzed. The results showed that there was no interaction between the nitrogen fertilizer factor and the cropping season factor. In addition, this study showed the short rainy season had the most positive impact on growth, flowering and yield parameters than the long rainy season. The results also showed that the different nitrogen fertilizer modalities had no statistically different effects on growth, flowering and yield parameters. However, quantitative differences were reported, highlighting one nitrogen fertilizer modality, which is the combination of urea granule + farm manure (75% urea indorama granules and 25% farm manure). The combination of urea granule + farm manure (75% urea indorama granules and 25% farm manure) had the best effect on corn grain yield. So, the combination of urea (75%) and manure (25%), that resulted in yield gain, could be recommended for corn fertilization during the small rainy season.

Technical-Economic Performance, Carcass and Meat Quality of COBB500 Broilers Fed Rations Incorporating Mango By-Product Feeds in Ivory Coast (West Africa)

The study evaluated the growth performance and carcass quality of COBB500 broilers fed two experimental rations incorporating feed and mango fine ED10 for a batch of 83 birds, ED20 (batch of 83 birds) in comparison with a commercial control ration CCD (84 birds). For this purpose, 250 day-old chicks of this breed were purchased in Korhogo and transported to Tengréla in Ivory Coast for rearing. The results show that substituting mango provender ans and mango seed flour for maize resulted in rations with costs per kgMS of 215.35FCFA, 2016.93FCFA and 320FCFA for the ED10, ED20 and CCD rations respectively. The production costs per kg of chicken (FCPkgLW) of the CCD ration were significantly higher than those of the ED10 and ED20 (p 0.05). ADGs were significantly different and decreasing from CCD, ED20 to ED10 (p 0.05). Average weights at 42nd day for ED20 and CCD were homogeneous (p > 0.05) and significantly higher than for ED10 (p 0.05). By day 49th the average weight of ED20 had reached and exceeded that of CCD by day 42nd. PSLW, HCW and CCW were significantly different and decreasing from CCW, ED20 to ED10 (p 0.05). Average hot (HCY) and cooled (CCY) carcass yields of ED20 and CCD rations were comparable (p > 0.05) and significantly higher than those of ED10 ration (p = 0.009) and 0.003). Average drumstick and neck weights were significantly higher and lower for CCD, ED20 and ED10 (p 0.05). For all other parts of the cut, the average weights of the CCD ration were significantly higher (p 0.05) than those of the ED20 and ED10 rations, which were homogeneous (p 0.05). The incorporation of mango provender and mango seed flour in broiler rations offers the prospect of reduced production costs, less competition between man and animals over cereals, and lean meat production that is more appreciated than that of chickens fed conventional feed. As it stands, the ED20 ration can be recommended as a growth diet for broilers. It would be necessary to determine the levels of anti-nutritional substances in mango feeds and to assess the in vivo digestibility of mango ingredients and the diets incorporating them.

Analysis of the Quality of Physical and Chemical Parameters of Groundwater in Three Localities in the Sub-Prefecture of Zanzra (Ivory Coast)

The availability of groundwater of acceptable quality has become a difficult challenge to meet in many countries, particularly Côte d’Ivoire. The State of Côte d’Ivoire and rural populations are building hydraulic infrastructure for this purpose. However, the quality of water coming from these infrastructures remains to be determined. This study therefore aims to analyze certain physicochemical parameters of the groundwater of Gloazra, Kouezra and Trahonfla. These are temperature, pH, electrical conductivity, TDS, salinity level, hardness, alkalinity, chloride content and bicarbonate. To determine the pH, electrical conductivity, temperature, TDS, and salinity rate, an electrochemical analysis was carried out. The titrimetric analysis made it possible to determine the chloride and bicarbonate content, alkalinity, and hardness. The results indicate that the studied groundwater is soft and acidic with good mineralization. This water does not present a health hazard to consumers but can affect hydraulic equipment and household containers.

Calcium-Magnesium Ca/Mg Ratios and Their Agronomic Implications for the Optimization of Phosphate Fertilization in Rainfed Rice Farming on Acidic Ferralsol in the Forest Zone of Ivory Coast

This study is a contribution to improving rice productivity on acidic plateau soils of the tropical rainforest zone. It is based on taking into account the cationic balances of the soil in order to optimize the phosphorus (P) nutrition of rice on these acidic soils, where this nutrient constitutes a limiting factor for agricultural production. Three (3) pot trials were conducted in Adiopodoumé in the forested south of Côte d’Ivoire. The interactive effects of calcium carbonate (0, 25, 50 and 75 kg Ca ha−1) and magnesium sulfate (0, 25, 50 and 75 kg Mg ha−1) were evaluated on the response of NERICA 5 rice at doses 0, 25, 50 and 75 kg P ha−1 of natural phosphate from Togo, applied only once at the start of the experiment. Additional fertilizers of nitrogen (N) (100 kg N ha−1) and potassium (K) (50 kg KCl ha−1) were added to each of the tests in a split-plot device. The test results revealed a paddy production potential of approximately 3 to 5 t⋅ha−1 for NERICA 5 on an acidic soil, under the effect of the interaction of P, Ca and Mg. The quadratic response of rice yield to the doses of these fertilizers would be more dependent on their balance, itself influenced by Ca nutrition. For the sustainability and maintenance of rice production in agro-ecology studied, it was recommended doses of 38 kg Ca ha−1, 34 kg Mg ha−1 in a Ca/Mg ratio (1/1) with intakes of 41 kg P ha−1, overall in a ratio 1/1/1 (P/Ca/Mg) more favorable to the availability of free iron considered a guiding element of mineral nutrition. Thus, these promising results should be confirmed in a real environment for better management of the fertilization of rice cultivated on acidic plateau soils in Côte d’Ivoire.

Wave Diffraction on Arc-Shaped Floating Perforated Breakwaters

An analytical method is developed to study the sheltering effects on arc-shaped floating perforated breakwaters. In the process of analysis, the tloating breakwater is assumed to be rigid, thin, vertical, and immovable and located in water with constant depth. The fluid domain is divided into two regions by imaginary interface. The velocity potential in each region is expanded by eigenfunction in the context of linear theory. By satisfying continuity of pressure and normal velocity across the imaginary fluid interface, a set of linear algebraic equations can be obtained to determine the unknown coefficients for eigenfunction expansions. The accuracy of the present model was verified by a comparison with existing results for the case of arc-shaped floating breakwater. Numerical results, in the form of contour maps of the non-dimensional wave amplitude around the breakwater and diffracted wave amplitude at typical sections, are presented for a range of wave and breakwater parameters. Results show that the sheltering effects on the arc-shaped floating perforated breakwater are closely related to the incident wavelength, the draft and the porosity of the breakwater.

Plastic Mechanism of Multi-pass Double-roller Clamping Spinning for Arc-shaped Surface Flange

Compared with the conventional single-roller spinning process, the double-roller clamping spinning（DRCS） process can effectively prevent the sheet metal surface wrinkling and improve the the production efficiency and the shape precision of final spun part. Based on ABAQUS/Explicit nonlinear finite element software, the finite element model of the multi-pass DRCS for the sheet metal is established, and the material model, the contact definition, the mesh generation, the loading trajectory and other key technical problems are solved. The simulations on the multi-pass DRCS of the ordinary Q235A steel cylindrical part with the arc-shaped surface flange are carried out. The effects of number of spinning passes on the production efficiency, the spinning moment, the shape error of the workpiece, and the wall thickness distribution of the final part are obtained. It is indicated definitely that with the increase of the number of spinning passes the geometrical precision of the spun part increases while the production efficiency reduces. Moreover, the variations of the spinning forces and the distributions of the stresses, strains, wall thickness during the multi-pass DRCS process are revealed. It is indicated that during the DRCS process the radical force is the largest, and the whole deformation area shows the tangential tensile strain and the radial compressive strain, while the thickness strain changes along the generatrix directions from the compressive strain on the outer edge of the flange to the tensile strain on the inner edge of the flange. Based on the G-CNC6135 NC lathe, the three-axis linkage computer-controlled experimental device for DRCS which is driven by the AC servo motor is developed. And then using the experimental device, the Q235A cylindrical parts with the arc-shape surface flange are formed by the DRCS. The simulation results of spun parts have good consistency with the experimental results, which verifies the feasibility of DRCS process and the reliability of the finite element model for DRCS.

Study on Submerged Upper Arc-Shaped Plate Type Breakwater

Based on the wave radiation and diffraction theory, this paper investigates a new type breakwater with upper arcshaped plate by using the boundary element method(BEM). By comparing with other three designs of plate type breakwater(lower arc-shaped plate, single horizontal plate and double horizontal plate), this new type breakwater has been proved more effective. The wave exiting force, transmission and reflection coefficients are analyzed and discussed. In order to reveal the wave elimination mechanism of this type of breakwater, the velocity field around the breakwater is obtained. It is shown that:(1) The sway exciting force is minimal.(2) When the ratio of the submergence and wave amplitude is 0.05, the wave elimination effect will increase by 50% compared with other three types of breakwater.(3) The obvious backflow is found above the plate in the velocity field analysis.

Numerical simulations of stress wave propagation and attenuation at arc-shaped interface inlayered SiC/Al composite

The effects of interface shape on stress wave distribution and attenuation were investiga- ted using finite element method （ FEM ）. The simulation results indicate that when the stress wave propagates from SiC ceramic to A1 alloy, the tensile stress decreases and the attenuation coefficient of the stress wave increases with increasing central angle of the concave interface between SiC and A1. But for the convex interface, the tensile stress increases and attenuation coefficient decreases with increasing central angle. As the stress wave propagates from A1 alloy to SiC ceramic, the atten- uation coefficient of stress wave decreases with increasing the central angle of the concave interface. For the convex interface, the attenuation coefficient increases with increasing central angle.

Hydrodynamic Performance of the Arc-Shaped Bottom-Mounted Breakwater

The problem of the hydrodynamic interaction with the arc-shaped bottom-mounted breakwaters is investigated theoretically. The breakwater is assumed to be rigid, thin, impermeable and vertically located in a finite water depth. The fluid domain is divided into two sub-regions of inner and outer by an auxiliary circular interface. Linear theory is assumed and the eigenfunction expansion approach is used to determine the wave field. In order to examine the validity of the theoretical model, the analytical solutions are compared to agree well with published results with the same parameters. Numerical results including wave amplitude, surge pressure, and wave force are presented with different model parameters. The major factors including wave parameters, structure configuration, and water depth that affect the surge pressure, wave forces, and wave amplitudes are discussed and illustrated by some graphs and cloud maps.

Assessment of the Vulnerability of the Southwestern Coast of Benin to the Risk of Coastal Erosion and Flooding

The coastal zone of Benin is inherited from the last marine oscillations of the Quaternary. A rich and very fragile environment, it presented until the 1960s, a shoreline in dynamic equilibrium over the entire 125 km of coastal line. Since the 1960s, with the construction of important development infrastructures (ports, dams, groins), the Beninese coast is now subject to risks of coastal erosion and seasonal flooding due to the overflow of lagoon water bodies. The present study, based on socio-economic surveys in the communes of Ouidah, Comè and Grand Popo, exposes the extent of coastal risks and socio-economic and environmental damage in the southwestern coastal zone of Benin. The results show that in terms of land, 2.9 ha and 5.7 ha of land have been permanently lost to coastal erosion in the communes of Ouidah and Grand Popo respectively. Similarly, 212 ha of crops of all types were affected by the flooding, including 35 ha destroyed, i.e. 6.67 ha, 11.3 ha in Comè, 4.67 ha Ouidah and 14 ha Grand Popo. Also, 6435 buildings were affected, and 4235 huts were damaged. In addition, working tools, food stocks and other items are counted among the losses recorded by coastal hazards with their corollaries of diseases. The cost of losses and damages in the 08 districts amount to 418,000,000f cfa of which 266,000,000f cfa of damage and 152,000,000f cfa of loss.

A DECAGONAL QUASICRYSTAL WITH AN ARC-SHAPED CRACK

A decagonal quasicrystal, which is weakened by an arc-shaped crackpenetrating through the solid in the period direction, and which is subjected to remote uniformphonon stresses, is investigated by applying the complex variable method which is just developed bythe authors. It is found that the phonon and phason stresses near the crack tips exhibit inversesquare root singularities. The four complex stress functions characterizing the phonon and phasonfields are derived. Explicit expressions for the phonon and phason stress intensity factors, crackopening displacements and energy release rate are also presented.

Clay mineral compositions in the surface sediment of the Chanthaburi coast(northeastern Gulf of Thailand)and their implications on sediment provenance

Clay mineral composition represents an important tracer of sediment source area,migration processes,and paleoclimatic conditions.Clay mineral analysis was performed on 15 surface sediment samples collected from the coast of Chanthaburi,Thailand.Results show that the composition of clay minerals in the study area differs substantially from that in surrounding regions of the Gulf of Thailand.The clay minerals of the Chanthaburi coast are dominated by kaolinite(~56%),followed by smectite(~21%),illite(~14%),and low concentrations of chlorite(~8%).The average illite chemistry index and crystallinity are 0.93 and 0.32,respectively.Comparative analysis of the clay mineral composition of surface sediments in several typical areas around the Gulf of Thailand indicated that the clays of the Chanthaburi coast are mainly derived from parent rock weathering in the small watersheds of the Chanthaburi and Welu rivers and the surrounding islands.Terrestrial input from the northern coast of the Gulf of Thailand(excluding the Mekong River)was previously considered negligible;however,the present results indicate that such input has impact on the eastern Gulf of Thailand.The warm humid climatic conditions in Southeast Asia are the primary factors that affect the strong chemical weathering in the study area,followed by the nature of the parent rock.

One Case of Acute Fluid Pericarditis and Hyperthyroidism at Teaching Hospital of Bouake (Ivory Coast): Cause-Effect Relationship or Accidental Association?

Cardiovascular complications during hyperthyroidism are dominated by arrhythmias, heart failure and coronary heart disease. Pericardial effusion which is a common complication of hypothyroidism is extremely rare in hyperthyroidism. We report the case of a 45-year-old woman admitted for management of pleuro-pericarditis associated with atrial fibrillation in the context of cardiothyreosis. The treatment consisted of a pericardial puncture associated with synthetic anti-thyroid drugs and anti-tuberculosis drugs with positive clinical and echocardiographic outcomes.

Inventory, Systematic and Biogeography of Brachyuran Crabs (Crustacea: Decapoda: Brachyura) on the Tunisian Coast

Several prospects on the northern, central and southern Tunisian coasts were carried out for the sake of a better interpretation of Brachyuran species distribution. Animals were either, captured by hand, caught with a fine mesh net or brought back by fishermen in nets or dredges. A total of 21 species belonging to twelve families and inhabiting different substrates were collected and divided into littoral species and species of depth. Five species were reported for the first time, in Tunisia. The littoral species are Carcinus aestuarii, Liocarcinus corrugatus, Liocarcinus vernalis, Pachygrapsus marmoratus, Pachygrapsus maurus, Brachynotus sexdentatus, Eriphia verrucosa, Maja squinado, Maja crispata, Acanthonyx lunulatus and Pisa tetraodon. The species of depths are Portunus hastatus, Euchirograpsus liguricus, Xantho granulicarpus, Ilia nucleus, Inachus dorsettensis, Lissa chiragra, Pisa corallina, Pisa armata, Calappa granulata and Dromia personata. All these species are reported in the Mediterranean. Some are reported for the first time in Tunisia: P. maurus, A. lunulatus, P. hastatus, E. liguricus, L. chiragra and P. corallina. In order to know the frequency of each species, the presence index was calculated. Carcinus aestuarii present in 91% of prospected stations is the most frequent and wide-distributed brachyuran species along Tunisian coasts.

Analysis of wave shoaling and shore-breakers on a low tide terrace beach based on in-situ measurements at Xisha Bay on South China coast

Low tide terrace beach is a main beach type along South China coasts with strong tidal actions.How strong tides affect wave transformations on low tide terrace beach still remains unclear.In this study,in-situ measurements are conducted on the low terrace beach at Xisha Bay to provide quantitative descriptions of wave shoaling and shore-breaker phenomena under the tidal effects.It is found that wave breaking is unsaturated on the low tide terrace beach at Xisha Bay.Magnitudes of wave skewness and asymmetry increase as wave shoals and achieve the maximum value at the shore-breaker,and then decrease rapidly.Mean energy dissipation rates of shore-breakers are tide-modulated since the bottom slope changes at the shoreward boundary of wave propagation in a tidal cycle.The remaining wave energy flux at the initialization of the shore-breaker is 1%–12%of offshore wave energy flux,and the energy flux ratio decreases with increasing offshore wave heights.Wave attenuation at shore-breakers can be estimated directly from offshore wave conditions based on findings in this study,favoring designs of seawalls or beach nourishment projects.Field datasets on wave transformations can also be used for verifications of wave numerical models.