Effect of pipe characteristics in umbrella arch method on controlling tunneling-induced settlements in soft grounds

Recent developments in tunneling have stimulated design practitioners to more effectively utilize the underground spaces.However,tunneling at shallow depth in soft grounds gives rise to concerns associated with tunnel instability.Umbrella arch method(UAM),as a pre-reinforcement approach of tunnels in complex geological conditions,is widely used to maintain the tunnel stability.Quantitative assessment of the impacts of the entire approach and forepoling pipe features on tunnel stability remains challenging due to the complex nature of the UAM application.This study aimed to assess the effect of pipe design parameters on reinforcing the tunnels excavated in soft grounds.This practical investigation considered the actual field conditions attributed to the tunneling procedure and UAM deployment.Then,the tunneling process was modeled and the tunnel excavation-induced settlements were calculated.The post-processed results confirmed that deploying the UAM substantially reduced the tunnel crown and ground surface settlements by 76%and 42%,respectively.Investigation of various design parameters of pipes underscored the significance of incorporating the optimum value for each individual parameter into design schemes to more effectively control the settlements.Additionally,contrasting the settlement reduction rates(SRRs)for pipe design variables showed that the tunnel stability is more sensitive to the changes in the values of diameter and length,compared to values of the installation angle and center-tocenter distance of the pipes.

The Types of Tunnels Maintenance in Umbrella Arch Method

During tunneling in loose grounds, the ground deformation caused by drillings around the tunnel, leads to land subsidence and the adjacent tunnel which would affect tunnel structure and surrounding structures. In such situations it is necessary to improve the properties of the ground prior to drilling operations. In order to acquire tunnel face stability during excavation operations in areas with loose soil fault or areas with lack of adhesion, there are various methods such as split cross drilling, frame holder or auxiliary pre-holding methods such as umbrella arch method;pre-holding methods must provide safety when drilling and must be affordable, economically. In this study, we assessed the previous studies on methods and behaviors of umbrella arch strategy in reinforcing the concrete tunnels, reached the purpose with experimental and numerical methods and offered the latest design achievements, implementation progresses and analysis in relation with this method.

Three-dimensional lattice Boltzmann method for simulating blood flow in aortic arch

The three-dimensional （3D） lattice Boltzmann models, 3DQ15, 3DQ19 and 3DQ27, under different wall boundary conditions and lattice resolutions have been investigated by simulating Poiseuille flow in a circular cylinder for a wide range of Reynolds numbers. The 3DQ19 model with improved Fillippova and Hanel （FH） curved boundary condition represents a good compromise between computational efficiency and reliability. Blood flow in an aortic arch is then simulated as a typical haemodynamic application. Axial and secondary fluid velocity and effective wall shear stress profiles in a 180° bend are obtained, and the results also demonstrate that the lattice Boltzmann method is suitable for simulating the flow in 3D large-curved vessels.

General displacement arch-cantilever element method for stress analysis of arch dam

Based on the general displacement method and the basic hypothesis of the trial load method, a new advanced trial load method, the general displacement arch-cantilever element method, was proposed to derive the transformation relation of displacements and loads between the surface nodes and middle plane nodes. This method considers the nodes on upstream and downstream surfaces of the arch dam to be exit nodes （master nodes）, and the middle plane nodes to be slave nodes. According to the derived displacement and load transformation matrices, the equilibrium equation treating the displacement of middle plane nodes as a basic unknown variable is transformed into one that treats the displacement of upstream and downstream nodes as a basic unknown variable. Because the surface nodes have only three degrees of freedom （DOF）, this method can be directly coupled with the finite element method （FEM）, which is used for foundation simulation to analyze the stress of the arch dam with consideration of dam-foundation interaction. Moreover, using the FEM, the nodal load of the arch dam can be easily obtained. Case studies of a typical cylindrical arch dam and the Wudongde arch dam demonstrate the robustness and feasibility of the proposed method.

洞桩法地铁车站边桩结构受力机制的模型试验设计

为了方便学生更形象地理解洞桩法地铁车站边桩结构的受力机制,该文以广州地区某洞桩法地铁车站工程为依托,设计了一种简化的洞桩法车站边桩结构模型试验。基于该试验方法,演示分析了边桩结构在洞桩法车站开挖过程中的施工力学行为规律,并对比研究了不同桩型布置参数下的桩后土压力、边桩结构的力学和变形规律。通过该试验,为学生展示了洞桩法边桩结构模型的设计、制作、试验具体操作及数据监测的全过程,从而让学生更好地掌握洞桩法车站边桩结构力学行为演变规律,以及采用不同边桩布置型式的力学行为差异。

Seismic damage analysis of the outlet piers of arch dams using the finite element sub-model method

This study aims to analyze seismic damage of reinforced outlet piers of arch dams by the nonlinear finite element （FE） sub-model method. First, the dam-foundation system is modeled and analyzed, in which the effects of infinite foundation, contraction joints, and nonlinear concrete are taken into account. The detailed structures of the outlet pier are then simulated with a refined FE model in the sub-model analysis. In this way the damage mechanism of the plain （unreinforced） outlet pier is analyzed, and the effects of two reinforcement measures （i.e., post-tensioned anchor cables and reinforcing bar） on the dynamic damage to the outlet pier are investigated comprehensively. Results show that the plain pier is damaged severely by strong earthquakes while implementation of post-tensioned anchor cables strengthens the pier effectively. In addition, radiation damping strongly alleviates seismic damage to the piers.

Nonlinear simulation of arch dam cracking with mixed finite element method

This paper proposes a new, simple and efficient method for nonlinear simulation of arch dam cracking from the construction period to the operation period, which takes into account the arch dam construction process and temperature loads. In the calculation mesh, the contact surface of pair nodes is located at places on the arch dam where cracking is possible. A new effective iterative method, the mixed finite element method for friction-contact problems, is improved and used for nonlinear simulation of the cracking process. The forces acting on the structure are divided into two parts： external forces and contact forces. The displacement of the structure is chosen as the basic variable and the nodal contact force in the possible contact region of the local coordinate system is chosen as the iterative variable, so that the nonlinear iterative process is only limited within the possible contact surface and is much more economical. This method was used to simulate the cracking process of the Shuanghe Arch Dam in Southwest China. In order to prove the validity and accuracy of this method and to study the effect of thermal stress on arch dam cracking, three schemes were designed for calculation. Numerical results agree with actual measured data, proving that it is feasible to use this method to simulate the entire process of nonlinear arch dam cracking.

粉煤灰堆积体大断面连拱隧道失稳破坏模式及施工力学研究

国内目前并无在粉煤灰堆积体中采用暗挖法修建大断面连拱隧道的先例,给隧道的设计和施工带来了巨大挑战。依托盐坪坝隧道工程,开展了室内相似模型试验,探讨了该地层下大断面连拱隧道塌落拱演化规律及开挖施工力学行为。研究结果表明:连拱隧道在粉煤灰堆积体中开挖极易发生失稳,将失稳过程划分为4个演化阶段,破坏模式具有突发性、剧烈性、对称性、同步性特征;塌落拱高度约为隧道开挖跨度的40%。采用单侧壁导坑法开挖时粉煤灰堆积体承载力严重不足,根据相似换算关系左、右洞拱顶沉降分别为16.86,14.91cm,需对地层实施注浆加固;地层沉降呈对称“双峰状”,先行洞相较于后行洞受开挖影响较大,中隔墙的承载作用能够有效降低地层位移,单洞压力拱向双洞压力拱转换过程中,中隔墙受到偏压作用容易向先行洞侧偏转,建议在先行洞开挖时中隔墙添加支撑物。

FRP筋混凝土短梁抗剪性能试验研究及承载力计算

为分析梁高、剪跨比、腹筋率等参数对纤维增强聚合物(FRP)筋混凝土短梁抗剪承载力的定量影响,并验证前期基于拉杆拱模型提出的抗剪承载力计算方法的科学合理性,对11根玄武岩FRP筋混凝土短梁开展了剪切破坏试验,试验梁最大梁高为1.2 m.试验结果表明,梁高、剪跨比、水平腹筋率、竖向腹筋率均对FRP筋混凝土短梁的抗剪承载力有显著影响.当梁高由300 mm增大到1200 mm,试验梁的无量纲极限抗剪强度下降46.7%.当水平腹筋率由0增大至1.0%,试验梁的无量纲极限抗剪强度提高40.5%.基于拉杆拱模型提出的抗剪承载力计算式可以合理反映梁高、剪跨比、水平腹筋率等因素的影响规律,计算结果与本试验结果及搜集试验数据均吻合良好.

浅埋无中导洞连拱隧道先行洞衬砌承担围岩荷载确定方法

不同于常规隧道衬砌结构,无中导洞连拱隧道先行洞衬砌施作稳定后还要受到邻近后行洞开挖的二次扰动,后行洞开挖对先行洞衬砌受力的影响不可忽视。依托杨家寨公路隧道工程,基于考虑了后行洞开挖影响的隧道围岩压力计算方法,结合现场监测位移数据采用荷载-结构法进行位移反分析,提出了一种确定浅埋无中导洞连拱隧道先行洞衬砌承担围岩荷载的方法,最后和衬砌背后围岩荷载现场监测值进行对比验证。研究结果表明:后行洞开挖对先行洞衬砌承担围岩荷载的影响较为显著,监测点增长幅度均值高达142%;先行洞衬砌受力呈现“拱腰较小,拱顶及拱肩较大”的分布规律,且靠近后行洞一侧拱肩位置受力最大;通过现场监测位移反分析得到的先行洞衬砌受力结果和现场监测结果较为一致,论证了该方法的合理性和实用性,研究成果可为无中导洞连拱隧道结构设计提供参考。

钢筋混凝土拱桥主拱圈加固方式及效果研究

目的 寻求钢筋混凝土拱桥主拱圈最佳加固方式,以改善加固效果,给同类危旧拱桥加固提供参考。方法 基于某实际加固桥例提出3种不同卸载方式的加固改造方案,采用Midas civil软件建立有限元模型,分析不同加固方式的影响规律;对原拱圈初始应力水平、施工阶段内力、成桥状态下应力、内力及挠度进行分析;利用加固层最大应力比、荷载置换率和挠度变化率对加固效果进行评价。结果 方案三的加固层最大应力比分别比方案一、二大45.12%与52.74%,荷载置换效果最显著,最大值达3.82,挠度变化率最大。结论 选择拱上建筑拆除得越多的方式进行加固,加固效果越好;对钢筋混凝土拱桥进行加固时,应基于加固方式制定加固施工方案,同时需考虑施工工期与加固成本。

考虑坝-基-库水相互作用的拱坝底缝开裂模拟

针对拱坝裂纹扩展问题,以某拱坝为例,建立了大坝-地基-库水系统的三维有限元模型.在此基础上,基于全耦合的拱坝-地基-库水模型,利用扩展有限元法(extended finite element methods,XFEM)对地震作用下的底缝开裂进行了模拟分析.研究中,在坝体上游底部设置了不同位置的人工短缝,以探讨拱坝在强震条件下的底缝开裂响应.结果表明:横缝削弱了坝体的整体性,增大了坝体的位移响应,但增设横缝可有效减小坝体的应力响应;在坝体底部设置人工短缝显著降低了坝踵的应力响应;拱坝的横缝对底缝开裂影响显著,能限制底缝的横向扩展,减少坝体的开裂损伤.

基于位移等代法的深部直墙半圆拱形隧洞松动圈厚度预测

【目的】位移等代法是在工程实践中被广泛应用的一种等效圆法。为进一步探索该方法在深部非均匀应力场下预测松动圈厚度的工程效果,并建立具有工程适用性的等效圆半径计算公式,【方法】选取深部隧洞常采用的直墙半圆拱形断面为研究对象,根据位移等代法基本原理,利用FLAC~(3D)数值模拟和理论计算相结合的方式,建立了侧压系数λ为1.1~1.5,跨高比b_0/h为1.3~1.5条件下的等效圆半径函数关系式,并应用到江西曲江某煤矿水仓围岩的松动圈厚度预测。【结果】结果显示:根据等效圆公式计算出的水仓围岩松动圈的纵轴厚度为1.41 m,横轴为1.20 m,呈椭圆形;现场实测的松动圈也呈椭圆形,厚度平均值在1.15~1.45 m,其中最大均值在纵轴1.45 m,最小均值在横轴为1.15 m。理论预测值与实测值相吻合。【结论】结果表明:位移等代法适用于深部软岩松动圈厚度预测;所建等效圆半径公式具有良好的工程适用性,可为评价和预测类似隧洞工程松动圈厚度提供一种简化的、可借鉴的方法和思路。

基于总安全系数法的系统锚杆支护承载能力试验研究

鉴于隧道现行规范缺乏系统锚杆支护的承载能力分析方法,总安全系数法提出了锚−岩承载拱的荷载结构模型与承载力计算方法,在理论上实现了锚杆的量化设计,但缺少试验验证。基于此,从结构试验角度研制了大型隧道结构模型试验系统,开展了毛洞与不同间距系统锚杆支护下的锚−岩承载拱结构承载试验。通过监测围岩内部应力−应变、隧道位移与锚杆应变,分析了围岩与锚杆材料的破坏状态与破坏荷载,研究了锚−岩承载拱变形与受力特征、锚杆轴力分布。对比分析了模型试验的结构承载力与总安全系数法理论下锚−岩承载拱的计算承载力。研究结果表明:锚杆能有效地与围岩协同承载,显著增加围岩的侧限力,提高围岩抗压强度与承载能力;试验得到的锚−岩承载拱承载能力与理论计算结果较为吻合,表明了总安全系数法的锚−岩承载拱计算模型是合理的,并具有合适的安全性。

内外水力交互下浅埋带压盾构隧道水土压力计算模型

针对浅埋有压盾构隧道内外水力交互渗流下引起的松动水土压力变化,基于修正镜像法获得了考虑内水压的地层渗流场分布与水力梯度。随后基于考虑松动区内部应力分布的修正Terzaghi公式给出了考虑隧道内水压下的松动区任意位置的水土压力解,并与数值模拟结果进行了对比验证。主要结论如下:采用圆弧拱和抛物线拱的主应力轨迹线能够有效描述隧顶松动区应力分布情况;当地层渗透系数与衬砌渗透系数比值小于1000时,内压水头大小对水土压力的影响显著;内压水头的增加将减小松动区有效应力,引起上覆土体卸载,同时引起隧顶松动区总应力增大,表明该范围内孔隙水压的增长对水土压力的变化占据主导作用;5参数正交分析结果的线性回归分析结果表明隧道埋深和半径对土压力有显著的正向影响,土体摩擦角和黏聚力均表现为负向影响。在相对低渗透地层条件下,内压水头对隧顶有效应力和总应力分别表现为显著的负向和正向影响。

钻爆法隧道下穿既有双连拱隧道施工技术研究

钻爆法隧道穿越新建既有双连拱隧道结构,下穿隧道为大跨度隧道,高度大、埋深较深,且在穿越既有隧道时,不能影响其安全运营和造成结构破坏,施工难度大、风险高。采用有限元软件Midas GTS NX对钻爆法隧道下穿既有隧道的变形和受力情况进行数值模拟计算,并研究了下穿施工前对上方隧道间地层采用大管棚和锚杆联合加固产生的效果。研究表明:未加固时,施工侧隧道结构的沉降要大于另一侧,呈现出“一峰二谷”变形形状,既有隧道上下部极易发生结构破坏。采用大管棚及锚杆联合加固,有效地转移了应力集中现象,降低了结构破坏风险,并且既有隧道沉降量仅为前者变化量的1/1.83,在控制标准以内。

基于响应面法的钢管混凝土系杆拱桥有限元模型修正

为探讨将钢管混凝土系杆拱桥有限元模型修正方法应用于实际工程性能评估的有效性,以某80 m单拱面钢管混凝土系杆拱桥为工程背景,采用Midas Civil与ANSYS有限元软件分别建立全桥梁格模型与拱脚精细化数值模型,基于径向基函数网络的响应面法对此多尺度模型进行修正。首先根据结构特点和实桥试验选取修正参数与目标函数,以中心复合试验设计构造不同修正水平下的修正参数样本,通过桥梁有限元模型计算得到对应的目标函数样本,并利用F检验法对修正参数的显著性水平进行判断;然后,以修正参数样本与目标函数样本分别作为响应面的输入输出,对径向基函数网络进行拟合训练;最后在修正范围内随机生成修正参数样本,并利用训练好的径向基网络预测对应的目标函数,采用期望度函数D进行优化处理以完成有限元模型的修正。研究结果表明:对于单拱面钢管混凝土系杆拱桥的有限元模型,可以通过径向基函数网络的响应面法进行修正,对比实测数据,修正后的模型误差有明显下降,可作为结构再分析的基准模型;对于使用不同程序建立的多尺度桥梁有限元模型,模型修正方法依旧有效,修正后的参数具有明确的物理意义,其误差可降到工程实践接受范围之内。研究结果为建立与修正钢管混凝土系杆拱桥的有限元模型提供参考。

砂土边坡桩间水平土拱机理与演变规律离散元分析

抗滑桩等非连续支挡结构在边坡工程中依靠土拱效应安全经济地发挥支护功能。鉴于不同类型砂土的力学性质差异较大,为揭示密砂与松砂土质边坡抗滑桩桩间水平土拱机理与演变规律,采用离散元方法(DEM)模拟支挡砂土水平土拱的成拱过程。在传统力链分析的基础上,提出通过筛选高应力颗粒来研究土拱的形成过程,进一步从细观角度对不同工况土拱效应进行分析,以揭示“应力拱”和“位移拱”的演化过程。研究表明:密砂和松砂中的水平土拱的动态演变过程均表现为3个演化阶段,分别对应于密砂和松砂的剪切性状,即应变软化和应变硬化现象,揭示了砂土边坡桩间土拱效应的演变规律。此外,讨论了宏-微观DEM模拟参数对土拱形成过程与土拱效应性能的影响,结果表明拱跨对于荷载传递效率的影响最大。

一次扣拱暗挖逆作法车站结构设计要点分析

随着城市地铁的快速发展,地铁线路通常会穿越人口密集、地面交通繁忙、地面建筑物林立、地下管线密布的市中心繁华地段,全暗挖法施工地铁车站在避免管线迁改、减少交通影响、改善施工环境等方面具有显著优势,但也具有施工条件受限、结构受力转换复杂、变形控制不利等特点。基于北京地铁14号线大望路站工程,分析了由于条件受限而采用全暗挖法施工的必要条件,针对一次扣拱暗挖法施工采用理论分析、数值计算、现场监测等手段对其结构受力体系、施工过程中地层变形控制等关键技术进行了系统分析和总结,揭示了该类型车站施工的受力和变形规律。

基于零位移与无应力状态控制的斜拉扣挂施工扣索力确定方法

大跨度拱桥常采用斜拉扣挂法开展拱肋施工,但在节段拼装过程中扣索索力和拱肋空间位形之间互相影响,索力优化计算以及扣索状态控制问题复杂。提出改进零位移法结合无应力状态控制法的复合扣索力计算方法:基于改进型零位移法快速得到满足成拱线形要求的扣索力大小,基于成拱索力采用无应力状态法反推各施工阶段扣索索力。该复合方法可避免传统零位移法扣索力不准和反复迭代计算的缺陷,施工中扣索可实现一次张拉,后续节段拼装中无需对扣索进行索力调整。以某跨径430 m大跨度钢管混凝土拱桥缆扣合一施工为工程应用背景,采用的零位移法结合无应力状态法对大跨度非对称式钢结构拱肋进行斜拉扣挂拼装的扣索力求解和施工模拟。分析拼装过程中扣索力变化规律,并对比验证实际线形与目标线形偏差,以及拱肋应力与设计应力之间偏差程度。结果表明,所提出的复合算法理论简单且索力求解计算便捷。所求的扣索力可有效保证拱肋拼装完成及松索后拱肋线形和受力均满足要求。