Designing of an all-optical time division multiplexing scheme with the help of nonlinear material based tree-net architecture

In the field of optical interconnecting network and in super fast photonic computing system, the tree architecture and optical nonlinear materials can play a significant role. Nonlinear optical material may find important uses in optical switching. Optical switch using nonlinear material makes it possible for one optical signal to control and switch another optical signal through nonlinear interaction in a material. In this communication such materials have been successfully exploited to design an all-optical tree-net architecture, which can be utilized for time division multiplexing scheme in all-optical domain.

Physical-Mechanical Properties of Sympodial Bamboo and Influence on Architecture Material Manufacture

Two kinds of big sympodial bamboo, D.Yunnanicus Hsueh and Whangee (D. Membranaceus Munro) andtheir physical and mechanical properties have been studied in the paper. The results showed that the whangee hasbetter physical properties than that of the Yunnanicus, such as higher density, lower tangential and longitudinal dryshrinkages. That also showed that Whangee has stronger mechanical properties in MOR and MOE, compressivestrength and shear strength parallel to the grain. Compared with some wood species used in architecture, the physicaland mechanical properties of the two kinds have reached the requirement of some wood architecture structurematerials.

Current Status and Prospects of New Architecture Materials from Bamboo

The feasibility of the technologies has been discussed in the paper that bamboo is used for middling and top-grade building construction, architecture decorating, and other major applications. The content includes the current application of bamboo materials in construction field; the bamboo bearing material technological process such as the laminated bamboo board, bamboo mat plywood processes; bamboo ceiling and wall material technologies such as the bamboo particleboard, cement-bonded bamboo particlebo...

Laminated Panel Manufacture of Two Kinds of Bamboo for Architecture Material and Property Comparison

The manufacture technologies of two kinds of bamboo laminated panel and their physical-mechanical properties have been studied in the paper. The species of bamboo are the D. yunnanicus Hsueh et D. Z. Li in Yunnan Province and P. heterocycla var. pubescens Ohwi in Zhejiang Province. The data are offered in order to provide proof to produce architectural panel by bamboo materials. The results show as follows: Laminated bamboo panel can be produced by the reconstruction technology, and the mechanical prope...

Macro-architectured cellular materials： Properties, characteristic modes, and prediction methods

Macro-architectured cellular （MAC） material is defined as a class of engineered materials having configurable cells of relatively large （i.e., visible） size that can be architecturally designed to achieve various desired material properties. Two types of novel MAC materials, negative Poisson＇s ratio material and biomimetic tendon reinforced material, were introduced in this study. To estimate the effective material properties for structural analyses and to optimally design such materials, a set of suitable homogenization methods was developed that provided an effective means for the multiscale modeling of MAC materials. First, a strain-based homogenization method was developed using an approach that separated the strain field into a homogenized strain field and a strain variation field in the local cellular domain superposed on the homogenized strain field. The principle of virtual displacements for the relationship between the strain variation field and the homogenized strain field was then used to condense the strain variation field onto the homogenized strain field. The new method was then extended to a stress-based homogenization process based on the principle of virtual forces and further applied to address the discrete systems represented by the beam or frame structures of the aforementioned MAC materials. The characteristic modes and the stress recovery process used to predict the stress distribution inside the cellular domain and thus determine the material strengths and failures at the local level are also discussed.

All-optical conversion scheme from binary to its MTN form with the help of nonlinear material based tree-net architecture

In the field of optical computing and parallel information processing, several number systems have been used for different arithmetic and algebraic operations. Therefore an efficient conversion scheme from one number system to another is very important. Modified trinary number （MTN） has already taken a significant role towards carry and borrow free arithmetic operations. In this communication, we propose a tree-net architecture based all optical conversion scheme from binary number to its MTN form. Optical switch using nonlinear material （NLM） plays an important role.

SPACE CARGO TRANSPORT BAGS THROUGH MEMBRANE WATER TREATMENT ELEMENTS TO SPACE ARCHITECTURE BUILDING ELEMENT:A TOTAL PRODUCT SUSTAINABILITY AND LIFE CYCLE DESIGN OPTIMIZATION EXPERIMENT

The CTB Water Wall project is a maximal product life cycle utilization concept study by members of the space architecture design community.Its function is to demonstrate a human space activity Cargo Transport Bag(CTB)that becomes a primary water recycling membrane element after delivery of cargo,and then a permanent architectural building block for sustainable space habitation after its use in water treatment is complete.As such,it is intended as an experiment in radical life cycle product optimization in an extremely mass-constrained application environment(human space operations).It also introduces some fundamentally interesting concepts in architectural use of waste materials in extreme environments.Finally,it is in some ways a simple,tactile and visual demonstration of how far sustainable product design can be taken,if the motivation and technical justification are present.