Room temperature sputtered inorganic nickel oxide(NiO_(x))is one of the most promising hole transport layers(HTL)for perovskite-sillion 2-terminal tandem solar cells with the aid of ultrathin and compact organic layer...Room temperature sputtered inorganic nickel oxide(NiO_(x))is one of the most promising hole transport layers(HTL)for perovskite-sillion 2-terminal tandem solar cells with the aid of ultrathin and compact organic layers to passivate the surface defects.In this study,the aromatic solvent with different substituent groups was used to regulate the conformation of poly[bis(4-phenyl)(2,4,6-trimethylphenyl)am ine](PTAA)layer.As a result,the single-junction perovskite solar cell(PSC)gained a power conversion efficiency(PCE)of 20.63%,contributing to a 27.21%efficiency for monolithic perovskite/silicon(double-side polished)2-terminal tandem solar cell,by applying the alkyl aromatic solvent to enhance theπ-πstacking of PTAA molecular chains.The tandem solar cell can maintain 95%initial efficiency after aging over 1000 h.This study provides a universal approach for improving the photovoltaic performance of NiO_(x)/polymer-based perovskite/silicon tandem solar cells and other single junction inverted PSCs.展开更多
Most of the recent organic solar cells(OSCs)with top-of-the-line efficiencies are processed from organic solvents with a high vapor pressure such as CF in nitrogen-filled glovebox,which is not feasible for large-area ...Most of the recent organic solar cells(OSCs)with top-of-the-line efficiencies are processed from organic solvents with a high vapor pressure such as CF in nitrogen-filled glovebox,which is not feasible for large-area manufacturing.Herein,we cast active layers with both aromatic hydrocarbon solvents and halogenated solvents without any solvent additive or post-treatment,as well as interlayers with water and methanol in air(35%relative humidity)for efficient OSCs,except cathode electrode's evaporation is in vacuum.Compared to the PM6:Y6 system that is processed from CF,the PM6:BTP-ClBr2 system demonstrates good efficiency of 16.28%processed from CB and the device based on PM6:BTP-4Cl achieves 16.33%using TMB as its solvent for the active layer.These are among the highest efficiencies for CB-and TMB-processed binary OSCs to date.The molecular packing and phase separation length scales of each combination depend strongly on the solvent,and the overall morphology is the result of the interplay between solvent evaporation(kinetics)and materials miscibility(thermodynamics).Different solvents are required to realize the optimal morphology due to the different miscibility between the donor and acceptor.Finally,17.36%efficiency was achieved by incorporating PC71BM for TMB-processed devices.Our result provides insights into the effect of processing solvent and shows the potential of realizing high-performance OSCs in conditions relevant for industrial fabrication.展开更多
基金supported by the National Key R&D Program of China(2018YFB1500103)the National Natural Science Foundation of China(62104082)+1 种基金the Guangdong Basic and Applied Basic Research Foundation(2022A1515010746,2022A1515011228)the Science and Technology Program of Guangzhou(202201010458)。
文摘Room temperature sputtered inorganic nickel oxide(NiO_(x))is one of the most promising hole transport layers(HTL)for perovskite-sillion 2-terminal tandem solar cells with the aid of ultrathin and compact organic layers to passivate the surface defects.In this study,the aromatic solvent with different substituent groups was used to regulate the conformation of poly[bis(4-phenyl)(2,4,6-trimethylphenyl)am ine](PTAA)layer.As a result,the single-junction perovskite solar cell(PSC)gained a power conversion efficiency(PCE)of 20.63%,contributing to a 27.21%efficiency for monolithic perovskite/silicon(double-side polished)2-terminal tandem solar cell,by applying the alkyl aromatic solvent to enhance theπ-πstacking of PTAA molecular chains.The tandem solar cell can maintain 95%initial efficiency after aging over 1000 h.This study provides a universal approach for improving the photovoltaic performance of NiO_(x)/polymer-based perovskite/silicon tandem solar cells and other single junction inverted PSCs.
基金financial support from National Natural Science Foundation of China 21927811support from the National Key Research and Development Program of China(No.2019YFA0705900)funded by MOST+7 种基金the Basic and Applied Basic Research Major Program of Guangdong Province(No.2019B030302007)Guangdong-Hong Kong-Macao Joint Laboratory of Optoelectronic and Magnetic Functional Materials(project number 2019B121205002)the Shen Zhen Technology and Innovation Commission(project number JCYJ20170413173814007,JCYJ20170818113905024)the Hong Kong Research Grants Council(Research Impact Fund R6021-18,collaborative research fund C6023-19G,project numbers 16309218,16310019,and 16303917)Hong Kong Innovation and Technology Commission for the support through projects ITC-CNERC14SC01 and ITS/471/18National Natural Science Foundation of China(NSFC,No.91433202)support from Natural Science Foundation of Top Talent of SZTU(grant number:20200205)support from Hong Kong Ph D Fel owship Scheme PF17-03929。
文摘Most of the recent organic solar cells(OSCs)with top-of-the-line efficiencies are processed from organic solvents with a high vapor pressure such as CF in nitrogen-filled glovebox,which is not feasible for large-area manufacturing.Herein,we cast active layers with both aromatic hydrocarbon solvents and halogenated solvents without any solvent additive or post-treatment,as well as interlayers with water and methanol in air(35%relative humidity)for efficient OSCs,except cathode electrode's evaporation is in vacuum.Compared to the PM6:Y6 system that is processed from CF,the PM6:BTP-ClBr2 system demonstrates good efficiency of 16.28%processed from CB and the device based on PM6:BTP-4Cl achieves 16.33%using TMB as its solvent for the active layer.These are among the highest efficiencies for CB-and TMB-processed binary OSCs to date.The molecular packing and phase separation length scales of each combination depend strongly on the solvent,and the overall morphology is the result of the interplay between solvent evaporation(kinetics)and materials miscibility(thermodynamics).Different solvents are required to realize the optimal morphology due to the different miscibility between the donor and acceptor.Finally,17.36%efficiency was achieved by incorporating PC71BM for TMB-processed devices.Our result provides insights into the effect of processing solvent and shows the potential of realizing high-performance OSCs in conditions relevant for industrial fabrication.