Array processing-a new method to detect and correct errors on array resistivity logging tool measurements

In recent years more and more multi-array logging tools, such as the array induction and the array lateralog, are applied in place of conventional logging tools resulting in increased resolution, better radial and vertical sounding capability and other features. Multi-array logging tools acquire several times more individual measurements than conventional logging tools. In addition to new information contained in these data, there is a certain redundancy among the measurements. The sum of the measurements actually composes a large matrix. Providing the measurements are error-free, the elements of this matrix show certain consistencies. Taking advantage of these consistencies, an innovative method is developed to detect and correct errors in the array resistivity logging tool raw measurements, and evaluate the quality of the data. The method can be described in several steps. First, data consistency patterns are identified based on the physics of the measurements. Second, the measurements are compared against the consistency patterns for error and bad data detection. Third, the erroneous data are eliminated and the measurements are re-constructed according to the consistency patterns. Finally, the data quality is evaluated by comparing the raw measurements with the re-constructed measurements. The method can be applied to all array type logging tools, such as array induction tool and array resistivity tool. This paper describes the method and illustrates its application with the High Definition Lateral Log （HDLL, Baker Atlas） instrument. To demonstrate the efficiency of the method, several field examples are shown and discussed.

Simulation logging experiment and interpretation model of array production logging measurements in a horizontal well

The distributions of local velocity and local phase holdup along the radial direction of pipes are complicated because of gravity differentiation,and the distribution of fluid velocity fi eld changes along the gravity direction in horizontal wells.Therefore,measuring the mixture flow and water holdup is difficult,resulting in poor interpretation accuracy of the production logging output profile.In this paper,oil–water two-phase flow dynamic simulation logging experiments in horizontal oil–water two-phase fl ow simulation wells were conducted using the Multiple Array Production Suite,which comprises a capacitance array tool(CAT)and a spinner array tool(SAT),and then the response characteristics of SAT and CAT in diff erent fl ow rates and water cut production conditions were studied.According to the response characteristics of CAT in diff erent water holdup ranges,interpolation imaging along the wellbore section determines the water holdup distribution,and then,the oil–water two-phase velocity fi eld in the fl ow section was reconstructed on the basis of the fl ow section water holdup distribution and the logging value of SAT and combined with the rheological equation of viscous fl uid,and the calculation method of the oil–water partial phase fl ow rate in the fl ow section was proposed.This new approach was applied in the experiment data calculations,and the results are basically consistent with the experimental data.The total fl ow rate and water holdup from the calculation are in agreement with the set values in the experiment,suggesting that the method has high accuracy.