Polarization-Insensitive Silica on Silicon Arrayed Waveguide Grating Design

A new technology for fabrication of silica on silicon arrayed waveguide grating (AWG) based on deep etching and thermal oxidation is presented.Using this method,a silicon layer is remained at the side of waveguide.The stress distribution and effective refractive index of waveguide fabricated by this approach are calculated using finite element and finite difference beam propagation method,respectively.The results of these studies indicate that the stress of silica on silicon optical waveguide can be matched in parallel and vertical direction and AWG polarization dependent wavelength (PDλ) can be reduced effectively due to side-silicon layer.

Array Waveguide Grating Based Fiber Lasers

Two array waveguide grating (AWGs) based fiber ring lasers are experimentally demonstrated. Either of them achieves wavelength discrete tuning of 32 nm, or yields simultaneously lasing up to four channels with -7 dBm output power for each channel.

A 32-channel 100 GHz wavelength division multiplexer by interleaving two silicon arrayed waveguide gratings

A 32-channel wavelength division multiplexer with 100 GHz spacing is designed and fabricated by interleaving two silicon arrayed waveguide gratings(AWGs).It has a parallel structure consisting of two silicon 16-channel AWGs with200 GHz spacing and a Mach-Zehnder interferometer(MZI)with 200 GHz free spectral range.The 16 channels of one silicon AWG are interleaved with those of the other AWG in spectrum,but with an identical spacing of 200 GHz.For the composed wavelength division multiplexer,the experiment results reveal 32 wavelength channels in C-band,a wavelength spacing of 100 GHz,and a channel crosstalk lower than-15 dB.

Design and fabrication of multi-channel photodetector array monolithic with arrayed waveguide grating

We have provided optical simulations of the evanescently coupled waveguide photodiodes integrated with a 13- channels AWGs. The photodiode could exhibit high internal efficiency by appropriate choice of layers geometry and refrac- tive index. Aseamless joint structure has been designed and fabricated for integrating the output waveguides of AWGs with the evanescently coupled waveguide photodiode array. The highest simulation quantum efficiency could achieve 92% when the matching layer thickfiess of the PD is 120 nm and the insertion length is 2 μm. The fabricated PD with 320-nm-thick match.ing layer and 2-μm-length insertion matching layer present a responsivity of 0.87 A/W.

Design and Analysis of 4×4 Arrayed Waveguide Grating Multiplexer

The operation principle of an arrayed waveguide grating(AWG) multiplexer is introduced and the 4×4 AWG with following design parameters is discussed in detail, such as the choice of wavelength, the neighboring arrayed waveguide distance ΔL, the channel frequency interval Δf, and the free spectral range. The structure of 4×4 AWG is designed and the result of stimulated test is also given. Analysis shows that the 4×4 AWG is characterized by a wide dynamic range, low crosstalk, better spectrum properties, and a compact structure.

Ultra-wideband low radar cross-section metasurface and its application on waveguide slot antenna array

A novel approach devoted to achieving ultra-wideband radar cross section reduction（RCSR） of a waveguide slot antenna array（WGSAA） while maintaining its radiation performance is proposed. Three kinds of artificial magnetic conductors（AMCs） tiles consisting of three types of basic units resonant at different frequencies are designed and arranged in a novel quadruple-triangle-type configuration to create a composite planar metasurface. The proposed metasurface is characterized by low radar feature over an ultra-wideband based on the principle of phase cancellation. Both simulated and measured results demonstrate that after the composite metasurface is used to cover part of the antenna array, an ultrawideband RCSR involving in-band and out-of-band is achieved for co-and cross-polarized incident waves based on energy cancellation, while the radiation performance is well retained. The proposed method is simple, low-cost, and easy-tofabricate, providing a new method for ultra-wideband RCSR of an antenna array. Moreover, the method proposed in this paper can easily be applied to other antenna architectures.

Novel wavelength-accurate InP-based arrayed waveguide grating

A 13-channel, InP-based arrayed waveguide grating （AWG） is designed and fabricated in which the on-chip loss of the central channel is about -5 dB and the crosstalk is less than -23 dB in the center of the spectrum response. However, the central wavelength and channel spacing are deviated from the design values. To improve their accuracy, an optimized design is adopted to compensate the process error. As a result, the central wavelength 1549.9 nm and channel spacing 1.59 nm are obtained in the experiment, while their design values are 1549.32 nm and 1.6 nm, respectively. The route capability and thermo-optic characteristic of the AWG are also discussed in detail.

Design and Fabrication of a 400 GHz InP-Based Arrayed Waveguide Grating with Flattened Spectral Response

A four-channel 400 GHz channel spacing InP-based arrayed waveguide grating with a flattened wavelength re- sponse by employing a multimode interference coupler at the input waveguide of the filter is prepared. The fabricated devices show a flattened spectral response with a broadened 3-dB bandwidth up to 3.5 nm, interchan- nel non-uniformity of 〈0. 7dB and excellent match to the simulation results.

Fluorinated polymer with high thermal stability for fabrication of 32-channel arrayed waveguide grating multiplexer on silicon

A cross-linkable fluorinated poly (ether ether ketone) (FPEEK) was synthesized for the fabrication of arrayed waveguide grating (AWG) multiplexer. The results of thermal gravimetric analysis (TGA) and near-infrared absorption spectrum show that the materials have high thermal stability and high optical transparency in the infrared communication region. The refractive index of FPEEK can be controlled easily by changing the fluorine content of the materials. The 32-channel AWG multiplexer is fabricated using the FPEEK and oxygen reactive ion etching technology. The AWG multiplexer exhibits that the insertion loss is from 12.8 to 17.8 dB and the channel crosstalk is less than-20 dB. The wavelength channel spacing and the center wavelength are 0.8nm and 1548nm, respectively.

Output mode characteristics of an in-phase locked gain waveguide array CO_2 laser

In this paper, experimental and theoretical studies of the output mode characteristics of an in-phase locked gain waveguide array CO2 laser are reported. The experimental results of the optical oscillation mode frequency, the far-field intensity distribution and the burnt pattern of the sliced waveguide array laser are obtained. A revised mode expression of the rectangle waveguide, which is suited for this waveguide array CO2 laser, is proposed. The theoretical simulation results based on the revised mode expression are shown to be in good agreement with the experimental results.

Influence of Crosstalk on Signal Power Based on Arrayed-waveguide Grating as N × N Optical Router

The fact that the signal results in signal―crosstalk is confirmed forarrayed―waveguide grating as NXN optical router, and the relation between the crosstalk and powerpenalty is obtained. The method reveals the random distributions of optical path phase errors in twomultiplexers with channel numbers of 10 and 160. It is shown that the crosstalk must be less than―28 dB for a power penalty below 1 dB at a bit error rate of 1X10^(-9). It is found that when N =100, crosstalk power value is ? 20 dB with compensation power of 2―3 dB, so the compensation poweris not ignored.

An Array Consisting of 10 High-Speed Side-Illuminated Evanescently Coupled Waveguide Photodetectors Each with a Bandwidth of 20 GHz

We design and fabricate a parallel system with 10 high speed side-illuminated evanescently coupled waveguide photodetectors （ECPDs）. The 10 ECPDs exhibit a uniform 3dB bandwidth of 20 GHz and low dark current of about i nA at 2 V reverse bias. The 10 ECPDs also exhibit uniform photo-responsivity of about 0.23A/W with an active region of 5 × 25μmS. The photodetector array has a total bandwidth of more than 200 GHz and can be integrated with other optoelectronic devices.

Electromagnetic coupling reduction in dual-band microstrip antenna array using ultra-compact single-negative electric metamaterials for MIMO application

In this paper, an ultra-compact single negative（SNG） electric waveguided metamaterial（WG-MTM） is first investigated and used to reduce the mutual coupling in E ＆ H planes of a dual-band microstrip antenna array. The proposed SNG electric WG-MTM unit cell is designed by etching two different symmetrical spiral lines on the ground, and has two stopbands operating at 1.86 GHz and 2.40 GHz. The circuit size is very compact, which is only λ_0/33.6 ×λ_0/15.1（where λ_0 is the wavelength at 1.86 GHz in free space）. Taking advantage of the dual-stopband property of the proposed SNG electric WG-MTM, a dual-band microstrip antenna array operating at 1.86 GHz and 2.40 GHz with very low mutual coupling is designed by embedding a cross shaped array of the proposed SNG electric WG-MTM. The measured and simulated results of the designed dual-band antenna array are in good agreement with each other, indicating that the mutual coupling of the fabricated dual-band antenna array realizes 9.8/11.1 d B reductions in the H plane, 8.5/7.9 d B reductions in the E plane at1.86 GHz and 2.40 GHz, respectively. Besides, the distance of the antenna elements in the array is only 0.35 λ_0（where λ_0 is the wavelength at 1.86 GHz in free space）. The proposed strategy is used for the first time to reduce the mutual coupling in E ＆ H planes of the dual-band microstrip antenna array by using ultra-compact SNG electric WG-MTM.

Ultralow cross talk arrayed waveguide grating integrated with tunable microring filter array

The silicon-based arrayed waveguide grating(AWG)is widely used due to its compact footprint and its compatibility with the mature CMOS process.However,except for AWGs with ridged waveguides of a few micrometers of cross section,any small process error will cause a large phase deviation in other AWGs,resulting in an increasing cross talk.In this paper,an ultralow cross talk AWG via a tunable microring resonator(MRR)filter is demonstrated on the SOI platform.The measured insertion loss and minimum adjacent cross talk of the designed AWG are approximately 3.2 and-45.1 d B,respectively.Compared with conventional AWG,its cross talk is greatly reduced.

Progress and realization platforms of dynamic topological photonics

Dynamic topological photonics is a novel research field, combining the time-domain optics and topological physics.In this review, the recent progress and realization platforms of dynamic topological photonics have been well introduced.The definition, measurement methods and the evolution process of the dynamic topological photonics are demonstrated to better understand the physical diagram. This review is meant to bring the readers a different perspective on topological photonics, grasp the advanced progress of dynamic topology, and inspire ideas about future prospects.

Triplexers Based on SOI Flattop AWGs

Triplexers are designed based on SOl flattop arrayed waveguide gratings （AWGs）. Three wavelengths （1310, 1490,and 1550nm） operate at three diffraction orders of AWGs. Simulation shows that the 3dB bandwidth,crosstalk, and loss are 6nm,less than -40dB, and 5dB, respectively. The output optical fields of the device fabricated in our laboratory are clear and show a good triplexing function.

Polymer Arrayed Waveguide Grating with Box-Like Spectral Response

An efficient technique is used to flatten the spectral response of an arrayed waveguide grating （AWG） multiplexer. By subtracting an increment from the core width of odd arrayed waveguides and by adding the same increment to that of even arrayed waveguides,a box-like spectral response can be obtained. A 17 × 17 polymer AWG multiplexer with box- like spectral response has been made using FPE polymer materials. Measured result for the AWG shows that the box-like spectral response has a 3dB bandwidth of 0. 476nm, the crosstalk is about or less than - 21dB for every output channel,and the insertion loss is 13-15dB.

Design and Fabrication of Polymer Arrayed Waveguide Grating

In this paper, based on the principle of Arrayed Waveguide Grating (AWG)theory, some important parameters are optimized for polymer AWG around the central wavelength of1.55μm with the wavelength spacing of 1.6 nm. Then, a 9 X 9 polymer AWG is designed and thefabricating process are described . The cladding material is poly-methyl-methacrylate-co-glyciclylmethacrylate (PMMA-GMA) and the core material is the mixture of PMMA-GMA and bis-phonel-A epoxy. Inorder to obtain a better shape of the waveguide after the Reactive Ion Etching (RIE) using oxygen,an aluminum mask is used on polymer instead of conventional photoresist as mask in the fabricationprocess. The measuring results indicate that the fabricated optical waveguide achieves single-modetransmission.

Subwavelength self-imaging in cascaded waveguide arrays

Self-imaging is an important function for signal transport,distribution,and processing in integrated optics,which is usually implemented by multimode interference or diffractive imaging process.However,these processes suffer from the resolution limit due to classical wave propagation dynamics.We propose and demonstrate subwavelength optical imaging in one-dimensional silicon waveguide arrays,which is implemented by cascading straight and curved waveguides in sequence.The coupling coefficient between the curved waveguides is tuned to be negative to reach a negative dispersion,which is an analog to a hyperbolic metamaterial with a negative refractive index.Therefore,it endows the waveguide array with a superlens function as it is connected with a traditional straight waveguide array with positive dispersion.With a judiciously engineered cascading silicon waveguide array,we successfully show the subwavelength self-imaging process of each input port of the waveguide array as the single point source.Our approach provides a strategy for dealing with optical signals at the subwavelength scale and indicates functional designs in high-density waveguide integrations.

Characterization of Birefringence and Dispersion Properties in an Arrayed Waveguide Grating

We have characterized polarization dependent loss(PDL), differential group delay(DGD), and chromatic dispersion of an AWG and a simple method was proposed to estimate the chromatic dispersion from the measured DGD of the device.