When the filler-bitumen ratio of asphalt mortar changes, its adhesion and viscoelasticity will also change, as well as its performance at the high and low temperatures, fatigue durability, and ductility. Thus, the app...When the filler-bitumen ratio of asphalt mortar changes, its adhesion and viscoelasticity will also change, as well as its performance at the high and low temperatures, fatigue durability, and ductility. Thus, the appropriate fillerbitumen ratio directly affects the asphalt mortar＇s performance. This paper tested the physical indexes of the No. 70 matrix asphalt mortar modified by additive Sasobit （SB） and Sasowam （SW） through dynamic shear rheometer and bending beam rheometer under different temperature conditions, and comprehensively analyzed the high-temperature anti-rutting and fatigue performance, low-temperature crack resistance performance, and ductility of asphalt mortar. The results show that ore powder not only can increase the antirutting factor but also can increase the aging resistance of asphalt. SB has better performances than SW at high temperatures. As for the filler-bitumen ratio of asphalt mortar with additive SB, the recommended value is between 0.8 and 1.2, and the value may be a little larger for that with SW.展开更多
In this paper we investigate the reinforcement mechanism of high viscosity rubber/SBS modified asphalt mortar mixed with fiber （mineral, lignin or carbon fiber） and deoiled asphalt （DOA）. The softening point, pene...In this paper we investigate the reinforcement mechanism of high viscosity rubber/SBS modified asphalt mortar mixed with fiber （mineral, lignin or carbon fiber） and deoiled asphalt （DOA）. The softening point, penetration and viscosity tests were conducted to characterize the engineering properties of asphalt-fiber mortar. The microstructure of fiber was observed using scanning electron microscopy （SEM）, and the results indicated that fiber can effectively improve the toughness of asphalt matrix through forming a spatial network structure, and then adhesion and stabilization of asphalt binder. The cone penetration test was designed to study the rheological property of fiber modified asphalt. The results indicated that the reinforcement effect increased with fibers and DOA fraction increasing to a certain threshold, and the optimal fiber content was dependent on the fiber type and its length. Fiber content and filler-asphalt ratio had significant effects on the softening point, penetration, viscosity and cone penetration of asphalt mortar.展开更多
In order to analyze the effect of different loading frequencies on the fatigue performance for asphalt mixture,the changing law of asphalt mixture strengths with loading speed was revealed by strength tests under diff...In order to analyze the effect of different loading frequencies on the fatigue performance for asphalt mixture,the changing law of asphalt mixture strengths with loading speed was revealed by strength tests under different loading speeds.Fatigue equations of asphalt mixtures based on the nominal stress ratio and real stress ratio were established using fatigue tests under different loading frequencies.It was revealed that the strength of the asphalt mixture is affected by the loading speed greatly.It was also discovered that the fatigue equation based on the nominal stress ratio will change with the change of the fatigue loading speed.There is no uniqueness.But the fatigue equation based on the real stress ratio doesn't change with the loading frequency.It has the uniqueness.The results indicate the fatigue equation based on the real stress ratio can realize the normalization of the asphalt mixture fatigue equation under different loading frequencies.It can greatly benefit the analysis of the fatigue characteristics under different vehicle speeds for asphalt pavement.展开更多
Different aging levels(RTFOT,PAV-10h,PAV-20h and PAV-30 h) of asphalt binders with various mass ratios of mineral powder to asphalt(0,0.4,0.8,1.2,1.6,2.0) were used to investigate the rheological properties of aged as...Different aging levels(RTFOT,PAV-10h,PAV-20h and PAV-30 h) of asphalt binders with various mass ratios of mineral powder to asphalt(0,0.4,0.8,1.2,1.6,2.0) were used to investigate the rheological properties of aged asphalt binders with respect to their short and long terms aging characteristics.Viscosity test,dynamic shear test and creep test were conducted.The test results indicate that the viscosity of aged asphalt binder increases sharply with the extension of aging period.Complex shear modulus of aged asphalt increases,which indicates that the stiffness of asphalt binders can increase.The phase angle for aged asphalt binders reduces,which indicates that the elastic portion for viscoelastic property of asphalt binders increases.|G*|·sin δ increases after aging procedure which means that the fatigue resistance becomes poor.The creep test results show that creep strain curves varies remarkably for virgin and aged asphalt binders.The total strain during loading period and the permanent strain decreases significantly for aged asphalt binders,which implies that the elastic portion increases and the viscous portion decreases.展开更多
The aim of this study is to investigate the asphalt mixture anisotropy of both the modulus and Poisson＇s ratio due to air voids using a discrete element modeling simulation method. Three three-dimensional cubic digit...The aim of this study is to investigate the asphalt mixture anisotropy of both the modulus and Poisson＇s ratio due to air voids using a discrete element modeling simulation method. Three three-dimensional cubic digital samples of asphalt mixture with different shapes of single air void were built using discrete element software PFC^（3D）. The aggregate gradation, air voids and mastic included in the digital samples were modeled using different contact models, with due consideration of the volumetric fractions of the different phases. Laboratory uniaxial complex modulus test and indirect tensile strength test were conducted to obtain material input parameters for numerical modeling. Simulation of the uniaxial cyclic compressive tests was performed on the three cubic samples loaded in three different directions. Dynamic modulus in three directions and Poisson＇s ratio in six directions were calculated from the compression stress-strain responses. Results show that both the modulus and Poisson＇s ratio are dependent on the preferential orientation of air voids. The anisotropy of the modulus and Poisson＇s ratio increases as the pressure loading on the asphalt mixture increases. Compared to the modulus, Poisson＇s ratio due to air voids has been shown to be more anisotropic. The maximum of Poisson＇s ratio and modulus is shown to be up to 80% and 11% higher than the minimum, respectively.展开更多
文摘When the filler-bitumen ratio of asphalt mortar changes, its adhesion and viscoelasticity will also change, as well as its performance at the high and low temperatures, fatigue durability, and ductility. Thus, the appropriate fillerbitumen ratio directly affects the asphalt mortar＇s performance. This paper tested the physical indexes of the No. 70 matrix asphalt mortar modified by additive Sasobit （SB） and Sasowam （SW） through dynamic shear rheometer and bending beam rheometer under different temperature conditions, and comprehensively analyzed the high-temperature anti-rutting and fatigue performance, low-temperature crack resistance performance, and ductility of asphalt mortar. The results show that ore powder not only can increase the antirutting factor but also can increase the aging resistance of asphalt. SB has better performances than SW at high temperatures. As for the filler-bitumen ratio of asphalt mortar with additive SB, the recommended value is between 0.8 and 1.2, and the value may be a little larger for that with SW.
基金supported by the National Natural Science Foundation of China (51008307)the Fundamental Research Funds for the Central Universities (09CX04039A)the Graduate Student Innovation Project of China University of Petroleum (East China) (12CX06055A)
文摘In this paper we investigate the reinforcement mechanism of high viscosity rubber/SBS modified asphalt mortar mixed with fiber （mineral, lignin or carbon fiber） and deoiled asphalt （DOA）. The softening point, penetration and viscosity tests were conducted to characterize the engineering properties of asphalt-fiber mortar. The microstructure of fiber was observed using scanning electron microscopy （SEM）, and the results indicated that fiber can effectively improve the toughness of asphalt matrix through forming a spatial network structure, and then adhesion and stabilization of asphalt binder. The cone penetration test was designed to study the rheological property of fiber modified asphalt. The results indicated that the reinforcement effect increased with fibers and DOA fraction increasing to a certain threshold, and the optimal fiber content was dependent on the fiber type and its length. Fiber content and filler-asphalt ratio had significant effects on the softening point, penetration, viscosity and cone penetration of asphalt mortar.
基金Projects(51208066,51038002)supported by the National Natural Science Foundation of ChinaProject(20114316120001)supported by Specialized Research Fund for the Doctoral Program of Higher Education,China+5 种基金Project(2012-319-825-150)supported by Application and Basic Research Projects of Ministry of Transport ChinaProject(2013K28)supported by Transportation Science and Technology Plan Projects of Henan Province,ChinaProject(201102)supported by Transportation Science and Technology Plan Projects of Hunan Province,ChinaProject(YB2012B031)supported by Funding Projects of Hunan Provincial Outstanding Doctorate Dissertation,ChinaProject(2014gxjgclkf-002)supported by Open Fund of Key Laboratory of Road Structure and Material of Guangxi Province ChinaProject(kfj120101)supported by Open Fund of the Key Laboratory of Highway Engineering(Changsha University of Science and Technology),China
文摘In order to analyze the effect of different loading frequencies on the fatigue performance for asphalt mixture,the changing law of asphalt mixture strengths with loading speed was revealed by strength tests under different loading speeds.Fatigue equations of asphalt mixtures based on the nominal stress ratio and real stress ratio were established using fatigue tests under different loading frequencies.It was revealed that the strength of the asphalt mixture is affected by the loading speed greatly.It was also discovered that the fatigue equation based on the nominal stress ratio will change with the change of the fatigue loading speed.There is no uniqueness.But the fatigue equation based on the real stress ratio doesn't change with the loading frequency.It has the uniqueness.The results indicate the fatigue equation based on the real stress ratio can realize the normalization of the asphalt mixture fatigue equation under different loading frequencies.It can greatly benefit the analysis of the fatigue characteristics under different vehicle speeds for asphalt pavement.
基金Project(200631800076) supported by 2006 West Science and Technology Project of the Department of Transportation
文摘Different aging levels(RTFOT,PAV-10h,PAV-20h and PAV-30 h) of asphalt binders with various mass ratios of mineral powder to asphalt(0,0.4,0.8,1.2,1.6,2.0) were used to investigate the rheological properties of aged asphalt binders with respect to their short and long terms aging characteristics.Viscosity test,dynamic shear test and creep test were conducted.The test results indicate that the viscosity of aged asphalt binder increases sharply with the extension of aging period.Complex shear modulus of aged asphalt increases,which indicates that the stiffness of asphalt binders can increase.The phase angle for aged asphalt binders reduces,which indicates that the elastic portion for viscoelastic property of asphalt binders increases.|G*|·sin δ increases after aging procedure which means that the fatigue resistance becomes poor.The creep test results show that creep strain curves varies remarkably for virgin and aged asphalt binders.The total strain during loading period and the permanent strain decreases significantly for aged asphalt binders,which implies that the elastic portion increases and the viscous portion decreases.
基金Funded by the National Natural Science Foundation of China(No.51208178)the Fundamental Research Funds for the Central Universities(No.2015B17014)
文摘The aim of this study is to investigate the asphalt mixture anisotropy of both the modulus and Poisson＇s ratio due to air voids using a discrete element modeling simulation method. Three three-dimensional cubic digital samples of asphalt mixture with different shapes of single air void were built using discrete element software PFC^（3D）. The aggregate gradation, air voids and mastic included in the digital samples were modeled using different contact models, with due consideration of the volumetric fractions of the different phases. Laboratory uniaxial complex modulus test and indirect tensile strength test were conducted to obtain material input parameters for numerical modeling. Simulation of the uniaxial cyclic compressive tests was performed on the three cubic samples loaded in three different directions. Dynamic modulus in three directions and Poisson＇s ratio in six directions were calculated from the compression stress-strain responses. Results show that both the modulus and Poisson＇s ratio are dependent on the preferential orientation of air voids. The anisotropy of the modulus and Poisson＇s ratio increases as the pressure loading on the asphalt mixture increases. Compared to the modulus, Poisson＇s ratio due to air voids has been shown to be more anisotropic. The maximum of Poisson＇s ratio and modulus is shown to be up to 80% and 11% higher than the minimum, respectively.
