Performance Characterization of CR/PU Asphalt for Potential Application in Assembled Fast-Repairing Engineering

Conventional repairing methods for asphalt pavement have some inconveniences,such as insufficient strength,and are typically time-consuming.To address these issues,this study proposes a new technological method to design and prepare a high-performance assembled asphalt concrete block for fast repair of the potholes.A series of composite modified asphalt binders with 10%crumb rubber(CR)and different dosages(0%,1%,3%,5%)of polyurethane(PU)are examined to determine the optimized binder.Subsequently,the corresponding asphalt mixtures are prepared for further comparison and assessment of engineering properties,such as moistureinduced damage,high-temperature deformation,and low-temperature cracking characteristics.The test results show that PU can significantly improve the high-temperature performance and hardness of(crumb rubber modified asphalt)CRMA binder;3%PU contributes allowing the resistance of CRMA mixture to moisture-induced damage at higher levels,particularly under water whole immersion;as 3%PU is added,the high-temperature rutting deformation resistance of the CRMA mixture increases significantly,and the low-temperature anti-cracking properties are also improved slightly.Therefore,the innovatively designed high-quality assembled fast-repairing asphalt concrete block is recommended as an appropriate option for highway maintenance.

Numerical Simulation-Based Analysis of the Impact of Overloading on Segmentally Assembled Bridges

Segmentally assembled bridges are increasinglyfinding engineering applications in recent years due to their unique advantages,especially as urban viaducts.Vehicle loads are one of the most important variable loads acting on bridge structures.Accordingly,the influence of overloaded vehicles on existing assembled bridge structures is an urgent concern at present.This paper establishes thefinite element model of the segmentally assembled bridge based on ABAQUS software and analyzes the influence of vehicle overload on an assembled girder bridge struc-ture.First,afinite element model corresponding to the target bridge is established based on ABAQUS software,and the load is controlled to simulate vehicle movement in each area of the traveling zone at different times.Sec-ond,the key cross-sections of segmental girder bridges are monitored in real time based on the force character-istics of continuous girder bridges,and they are compared with the simulation results.Finally,a material damage ontology model is introduced,and the structural damage caused by different overloading rates is compared and analyzed.Results show that thefinite element modeling method is accurate by comparing with on-site measured data,and it is suitable for the numerical simulation of segmental girder bridges;Dynamic sensors installed at 1/4L,1/2L,and 3/4L of the segmental girder main beams could be used to identify the dynamic response of segmental girder bridges;The bottom plate of the segmental girder bridge is mostly damaged at the position where the length of the precast beam section changes and the midspan position.With the increase in load,damage in the direction of the bridge develops faster than that in the direction of the transverse bridge.Thefindings of this study can guide maintenance departments in the management and maintenance of bridges and vehicles.

Application Strategies of Modular Design in Assembled Teaching Buildings

As an efficient,environmentally friendly,energy-saving construction method,assembled buildings are now widely used in campus building construction.Modular design thinking is system-based design thinking,and its application to the design of an assembled teaching building project will comprehensively improve the rationality of the teaching building and component design.The paper focuses on the application of modular design thinking in assembled teaching building design,aiming to provide references for China’s architectural design units,giving full play to the advantages of modular design thinking in future teaching building design projects,and enhancing the level of design,for the construction of the teaching building and the basis of the technical guarantee.

Electrodeposited 3D hierarchical NiFe microflowers assembled from nanosheets robust for the selective electrooxidation of furfuryl alcohol

A robust and green strategy for the selective upgrading of biomass-derived platform chemicals towards highly valuable products is important for the sustainable development.Herein,the efficient electrocatalytic oxidation of biomass-derived furfuryl alcohol(FFA)into furoic acid(FurAc)catalyzed by the electrodeposited non-precious NiFe microflowers was successfully reached under the low temperature and ambient pressure.The 3D hierarchical NiFe microflowers assembled from ultrathin nanosheets were controllably synthesized by the electrodeposition method and uniformly grown on carbon fiber paper(CFP).Electrochemical analysis confirmed that NiFe nanosheets more preferred in the selective oxidation of FFA(FFAOR)than oxygen evolution reaction(OER).The linear sweep voltammetry(LSV)in FFAOR displayed a clear decrease towards lower potential,resulting in 30 mV reduction of overpotential at 20 mA cm^(-2) compared with that of OER.The optimal catalyst Ni_(1)Fe_(2) nanosheets exhibited the highest selectivity of FurAc(94.0%)and 81.4%conversion of FFA within 3 h.Besides,the influence of various reaction parameters on FFAOR was then explored in details.After that,the reaction pathway was investigated and rationally proposed.The outstanding performance for FFAOR can be ascribed to the unique structure of 3D flower-like NiFe nanosheets and oxygen vacancies,resulting in large exposure of active sites,faster electron transfer and enhanced adsorption of reactants.Our findings highlight a facile and convenient mean with a promising green future,which is promising for processing of various biomass-derived platform chemicals into value-added products.

Ionic Liquid-Enhanced Assembly of Nanomaterials for Highly Stable Flexible Transparent Electrodes

The controlled assembly of nanomaterials has demon-strated significant potential in advancing technological devices.However,achieving highly efficient and low-loss assembly technique for nanomate-rials,enabling the creation of hierarchical structures with distinctive func-tionalities,remains a formidable challenge.Here,we present a method for nanomaterial assembly enhanced by ionic liquids,which enables the fabrication of highly stable,flexible,and transparent electrodes featuring an organized layered structure.The utilization of hydrophobic and non-volatile ionic liquids facilitates the production of stable interfaces with water,effectively preventing the sedimentation of 1D/2D nanomaterials assembled at the interface.Furthermore,the interfacially assembled nanomaterial monolayer exhibits an alternate self-climbing behavior,enabling layer-by-layer transfer and the formation of a well-ordered MXene-wrapped silver nanowire network film.The resulting composite film not only demonstrates exceptional photoelectric performance with a sheet resistance of 9.4Ωsq^(-1) and 93%transmittance,but also showcases remarkable environmental stability and mechanical flexibility.Particularly noteworthy is its application in transparent electromagnetic interference shielding materials and triboelectric nanogenerator devices.This research introduces an innovative approach to manufacture and tailor functional devices based on ordered nanomaterials.

Response Spectrum Analysis of 7-story Assembled Frame Structure with Energy Dissipation System

Viscoelastic damper is an effective passive damping device,which can reduce the seismic response of the structure by increasing the damping and dissipating the vibration energy of structures.It has a wide application prospect in actual structural vibration control because of simple device and economical material.In view of the poor seismic behaviors of assembled frame structure connections,various energy dissipation devices are proposed to improve the seismic performance.The finite element numerical analysis method is adopted to analyze relevant energy dissipation structural parameters.The response spectrum of a 7-story assembled frame structure combined the ordinary steel support,ordinary viscoelastic damper,and viscoelastic damper with displacement amplification device is analyzed.The analysis results show that the mechanical behavior of assembled frame structure with ordinary steel supports are not significantly different from those without energy dissipation devices.The assembled frame structure with viscoelastic damper has better seismic performance and energy dissipation,especially for the viscoelastic damper with displacement amplification devices.The maximum value of inter-story displacement angle decreases by 32.24%;the maximum floor displacement decreases by 31.91%,and the base shear decreases by 13.62%compared with the assembled frame structures without energy dissipation devices.The results show that the seismic fortification ability of the structure is significantly improved,and the overall structure is more uniformly stressed.The damping structure with viscoelastic damper mainly reduces the dynamic response of the structure by increasing the damping coefficient,rather than by changing the natural vibration period of the structure.This paper provides an effective theoretical basis and reference for improving the energy dissipation system and the seismic performance of assembled frame structures.

Self-assembly of tau fragments as a key pathologic event in tauopathies

Tau protein is encoded by the microtubuleassociated protein tau(MAPT)gene and stabilizes microtubules in the neurons.Tau has unique biophysical properties that make it both highly water-soluble and positively charged.Although tau is an intrinsically disordered protein lacking defined secondary structures,it can acquire highly organized-sheet structures and stack into a filamentous inclusion such as a paired helical filament(PHF).

A telomere-to-telomere genome assembly of Zhonghuang 13,a widely-grown soybean variety from the original center of Glycine max

Soybean(Glycine max)stands as a globally significant agricultural crop,and the comprehensive assembly of its genome is of paramount importance for unraveling its biological characteristics and evolutionary history.Nevertheless,previous soybean genome assemblies have harbored gaps and incompleteness,which have constrained in-depth investigations into soybean.Here,we present Telomere-to-Telomere(T2T)assembly of the Chinese soybean cultivar Zhonghuang 13(ZH13)genome,termed ZH13-T2T,utilizing PacBio Hifi and ONT ultralong reads.We employed a multi-assembler approach,integrating Hifiasm,NextDenovo,and Canu,to minimize biases and enhance assembly accuracy.The assembly spans 1,015,024,879 bp,effectively resolving all 393 gaps that previously plagued the reference genome.Our annotation efforts identified 50,564 high-confidence protein-coding genes,707 of which are novel.ZH13-T2T revealed longer chromosomes,421 not-aligned regions(NARs),112 structure variations(SVs),and a substantial expansion of repetitive element compared to earlier assemblies.Specifically,we identified 25.67 Mb of tandem repeats,an enrichment of 5S and 48S rDNAs,and characterized their genotypic diversity.In summary,we deliver the first complete Chinese soybean cultivar T2T genome.The comprehensive annotation,along with precise centromere and telomere characterization,as well as insights into structural variations,further enhance our understanding of soybean genetics and evolution.

An Improved Chromosome-Level Genome Assembly and Annotation of Belted Beard Grunt(Hapalogenys analis)

Hapalogenys analis(order Lobotiformes)is an economically and ecologically significant fish species.It is a typical sedentary rocky reef fish and is primarily found in the northern Pacific Ocean.Here,we used Hi-C and PacBio sequencing technique to assemble a high-quality,chromosome-level genome for this species.The 539 Mb genome had a contig N50 with a size of 3.43 Mb,while 755 contigs clustered into 24 chromosomal groups with an anchoring rate of 99.02%.Of the total genomic sequence,132.74Mb(24.39%)were annotated as repeat elements.A total of 21360 protein-coding genes were identified,of which 20787 genes(97.32%)were successfully annotated to public databases.The BUSCO evaluation indicated that 96.90%of the total orthologous genes were matched.The phylogenetic tree representing H.analis and 14 other bony fish species indicated that the H.analis genome contained 364 expanded gene families related to olfactory receptor activity,compared with the common ancestor of H.analis and Sciaenidae.Comparative genomic analysis further identified 3584 contracted gene families.Branch-site modeling identified 277 genes experiencing positive selection,which may facilitate the adaptation to rocky reef environments.The genome reported here is helpful for ecological and evolutionary studies of H.analis.

Optimization of Fixture Number in Large Thin-Walled Parts Assembly Based on IPSO

There are lots of researches on fixture layout optimization for large thin-walled parts.Current researches focus on the positioning problem,i.e.,optimizing the positions of a constant number of fixtures.However,how to determine the number of fixtures is ignored.In most cases,the number of fixtures located on large thin-walled parts is determined based on engineering experience,which leads to huge fixture number and extra waste.Therefore,this paper constructs an optimization model to minimize the number of fixtures.The constraints are set in the optimization model to ensure that the part deformation is within the surface profile tolerance.In addition,the assembly gap between two parts is also controlled.To conduct the optimization,this paper develops an improved particle swarm optimization(IPSO)algorithm by integrating the shrinkage factor and adaptive inertia weight.In the algorithm,particles are encoded according to the fixture position.Each dimension of the particle is assigned to a sub-region by constraining the optional position range of each fixture to improve the optimization efficiency.Finally,a case study on ship curved panel assembly is provided to prove that our method can optimize the number of fixtures while meeting the assembly quality requirements.This research proposes a method to optimize the number of fixtures,which can reduce the number of fixtures and achieve deformation control at the same time.

Textured Asymmetric Membrane Electrode Assemblies of Piezoelectric Phosphorene and Ti_(3)C_(2)T_(x)MXene Heterostructures for Enhanced Electrochemical Stability and Kinetics in LIBs

Black phosphorus with a superior theoretical capacity(2596 mAh g^(-1))and high conductivity is regarded as one of the powerful candidates for lithium-ion battery(LIB)anode materials,whereas the severe volume expansion and sluggish kinetics still impede its applications in LIBs.By contrast,the exfoliated two-dimensional phosphorene owns negligible volume variation,and its intrinsic piezoelectricity is considered to be beneficial to the Li-ion transfer kinetics,while its positive influence has not been discussed yet.Herein,a phosphorene/MXene heterostructure-textured nanopiezocomposite is proposed with even phosphorene distribution and enhanced piezo-electrochemical coupling as an applicable free-standing asymmetric membrane electrode beyond the skin effect for enhanced Li-ion storage.The experimental and simulation analysis reveals that the embedded phosphorene nanosheets not only provide abundant active sites for Li-ions,but also endow the nanocomposite with favorable piezoelectricity,thus promoting the Li-ion transfer kinetics by generating the piezoelectric field serving as an extra accelerator.By waltzing with the MXene framework,the optimized electrode exhibits enhanced kinetics and stability,achieving stable cycling performances for 1,000 cycles at 2 A g^(-1),and delivering a high reversible capacity of 524 m Ah g^(-1)at-20℃,indicating the positive influence of the structural merits of self-assembled nanopiezocomposites on promoting stability and kinetics.

Gapless Genome Assembly of ZH8015 and Preliminary Multi-Omics Analysis to Investigate ZH8015's Responses Against Brown Planthopper Infestation

Accurate genomic information is essential for advancing genetic breeding research in specific rice varieties.This study presented a gapless genome assembly of the indica rice cultivar Zhonghui 8015(ZH8015)using Pac Bio HiFi,Hi-C,and ONT(Oxford Nanopore Technologies)ultra-long sequencing technologies,annotating 43037 gene structures.Subsequently,utilizing this genome along with transcriptomic and metabolomic techniques,we explored ZH8015's response to brown planthopper(BPH)infestation.Continuous transcriptomic sampling indicated significant changes in gene expression levels around 48 h after BPH feeding.Enrichment analysis revealed particularly significant alterations in genes related to reactive oxygen species scavenging and cell wall formation.Metabolomic results demonstrated marked increases in levels of several monosaccharides,which are components of the cell wall and dramatic changes in flavonoid contents.Omics association analysis identified differentially expressed genes associated with key metabolites,shedding light on ZH8015's response to BPH infestation.In summary,this study constructed a reliable genome sequence resource for ZH8015,and the preliminary multi-omics results will guide future insect-resistant breeding research.

Engineering vascularized organotypic tissues via module assembly

Adequate vascularization is a critical determinant for the successful construction and clinical implementation of complex organotypic tissue models. Currently, low cell and vessel density and insufficient vascular maturation make vascularized organotypic tissue construction difficult,greatly limiting its use in tissue engineering and regenerative medicine. To address these limitations, recent studies have adopted pre-vascularized microtissue assembly for the rapid generation of functional tissue analogs with dense vascular networks and high cell density. In this article, we summarize the development of module assembly-based vascularized organotypic tissue construction and its application in tissue repair and regeneration, organ-scale tissue biomanufacturing, as well as advanced tissue modeling.

Experimental Study on the Electrochemical Performance of PEMFC under Different Assembly Forces

Proton exchange membrane fuel cell(PEMFC)is of paramount significance to the development of clean energy.The components of PEMFC are assembled using many pairs of nuts and bolts.The assembly champing bolt torque is critical to the electrochemical performance and mechanical stability of PEMFC.In this paper,a PEMFC with the threechannel serpentine flow field was used and studied.The different assembly clamping bolt torques were applied to the PEMFC in three uniform assembly bolt torque and six non-uniform assembly bolt torque conditions,respectively.And then,the electrochemical performance experiments were performed to study the effect of the assembly bolt torque on the electrochemical performance.The test results show that the assembly bolt torque significantly affected the electrochemical performance of the PEMFC.In uniform assembly bolt torque conditions,the maximal power density increased initially as the assembly bolt torque increased,and then decreased on further increasing the assembly torque.It existed the optimum assembly torque which was found to be 3.0 N·m in this work.In non-uniform assembly clamping bolt torque conditions,the optimum electrochemical performance appeared in the condition where the assembly torque of each bolt was closer to be 3.0 N·m.This could be due to the change of the contact resistance between the gas diffusion layer and bipolar plate and mass transport resistance for the hydrogen and oxygen towards the catalyst layers.This work could optimize the assembly force conditions and provide useful information for the practical PEMFC stack assembly.

A telomere-to-telomere genome assembly of Hongyingzi,a sorghum cultivar used for Chinese Baijiu production

Sorghum(Sorghum bicolor(L.)Moench)is a world cereal crop used in China for producing Baijiu,a distilled spirit.We report a telomere-to-telomere genome assembly of the Baijiu cultivar Hongyingzi,HYZ-T2T,using ultralong reads.The 10 chromosome pairs contained 33,462 genes,of which 93%were functionally annotated.The 20 telomeres and 10 centromeric regions on the HYZ-T2T chromosomes were predicted and two consecutive large inversions on chromosome 2 were characterized.A 65-gene reconstruction of the metabolic pathway of tannins,the flavor substances in Baijiu,was performed and may advance the breeding of sorghum cultivars for Baijiu production.

Designing Membrane Electrode Assembly for Electrochemical CO_(2)Reduction:a Review

Currently, the electrochemical CO_(2) reduction reaction (CO_(2) RR) can realize the resource conversion of CO_(2) , which is a promising approach to carbon resource use. Important advancements have been made in exploring the CO_(2) RR performance and mechanism because of the rational design of electrolyzer systems, such as H-cells, flow cells, and catalysts. Considering the future development direction of this technology and large-scale application needs, membrane electrode assembly (MEA) systems can improve energy use efficiency and achieve large-scale CO_(2) conversion, which is considered the most promising technology for industrial applications. This review will concentrate on the research progress and present situation of the MEA component structure. This paper begins with the composition and construction of a gas diff usion electrode. Then, the application of ion-exchange membranes in MEA is introduced. Furthermore, the eff ects of pH and the anion and cation of the anolyte on MEA performance are explored. Additionally, we present the anode reaction type in MEA. Finally, the challenges in this field are summarized, and upcoming trends are projected. This review should offer researchers a clearer picture of MEA systems and provide important, timely, and valuable insights into rational electrolyzer design to facilitate further development of CO_(2) electrochemical reduction.

Response and assembly of abundant and rare taxa in Zaopei under different combination patterns of Daqu and pit mud:from microbial ecology to Baijiu brewing microecosystem

The quality and aroma of strong-flavor Baijiu are mainly dependent on Daqu,pit mud(PM),and the interaction of both.However,little is known about how their combination patterns affect the microbiome and metabolome of Zaopei,especially the metabolic function of rare taxa.Here,an experiment on industrial size was designed to assess the effects of 6 combinations(3 kinds of Daqu×2 kinds of PM)on the composition and assembly of different taxa,as well as the flavor profile.The results showed that Zaopei's microbiota was composed of a few abundant taxa and enormous rare taxa,and rare bacterial and abundant fungal subcommunities were significantly affected by combination patterns.The assembly processes of abundant/rare taxa and bacterial/fungal communities were distinct,and environmental changes mediated the balance between stochastic and deterministic processes in rare bacteria assembly.Furthermore,specific combination patterns improved the flavor quality of Zaopei by enhancing the interspecies interaction,which was closely related to rare taxa,especially rare bacteria.These findings highlighted that rare bacteria might be the keystone in involving community interaction and maintaining metabolic function,which provided a scientific foundation for better understanding and regulating the brewing microbiota from the viewpoint of microbial ecology.

Digital Twin Modeling and Simulation Optimization of Transmission Front and Middle Case Assembly Line

As the take-off of China’s macro economy,as well as the rapid development of infrastructure construction,real estate industry,and highway logistics transportation industry,the demand for heavy vehicles is increasing rapidly,the competition is becoming increasingly fierce,and the digital transformation of the production line is imminent.As one of themost important components of heavy vehicles,the transmission front andmiddle case assembly lines have a high degree of automation,which can be used as a pilot for the digital transformation of production.To ensure the visualization of digital twins(DT),consistent control logic,and real-time data interaction,this paper proposes an experimental digital twin modeling method for the transmission front and middle case assembly line.Firstly,theDT-based systemarchitecture is designed,and theDT model is created by constructing the visualization model,logic model,and data model of the assembly line.Then,a simulation experiment is carried out in a virtual space to analyze the existing problems in the current assembly line.Eventually,some improvement strategies are proposed and the effectiveness is verified by a new simulation experiment.

Design and assembly of a nested imaging X-ray telescope for the Hot Universe Baryon Surveyor mission

The Hot Universe Baryon Surveyor (HUBS) mission will carry a nested X-ray telescope capable of observing an energy range from 0.5 keV to 2 keV to study hot baryon evolution. In this paper, we report the latest progress in the design and construction of nested X-ray telescopes which were designed to use a three-stage conic-approximation type assembly to simplify the manufacturing process. The mirror substrate is made using the thermal glass slumping method, with mirrors characterized by a root-mean-square roughness of 0.3 nm, with expected high reflectivity and good thermal stability. We also discuss methods of telescope construction and conduct a deformation analysis of the manufactured mirror. The in situ measurement system program is developed to guide the telescope assembly process.

Evaluating Methods of Visual Assistance for Workers to Improve Quality and Usability in Individualized Kitchen Cabinet Assembly

In times of digitalisation, visual assistance systems in assembly are increasingly important. The design of these assembly systems needs to be highly complex to meet the requirements. Due to the increasing number of variants in production processes, as well as shorter innovation and product life cycles, assistance systems should improve quality and reduce complexity of assembly processes. However, many large kitchen manufacturers still assemble kitchen cabinets manually, due to the high variety of components, such as rails and fittings. This paper focuses on the analysis and evaluation of virtual assistance systems to improve quality and usability in individualised kitchen cabinet assembly processes at a large German manufacturer. A solution is identified and detailed.