The Jiao Tong University Spectroscopic Telescope(JUST)is a 4.4-meter f/6.0 segmented-mirror telescope dedicated to spectroscopic observations.The JUST primary mirror is composed of 18 hexagonal segments,each with a di...The Jiao Tong University Spectroscopic Telescope(JUST)is a 4.4-meter f/6.0 segmented-mirror telescope dedicated to spectroscopic observations.The JUST primary mirror is composed of 18 hexagonal segments,each with a diameter of 1.1 m.JUST provides two Nasmyth platforms for placing science instruments.One Nasmyth focus fits a field of view of 10′and the other has an extended field of view of 1.2°with correction optics.A tertiary mirror is used to switch between the two Nasmyth foci.JUST will be installed at a site at Lenghu in Qinghai Province,China,and will conduct spectroscopic observations with three types of instruments to explore the dark universe,trace the dynamic universe,and search for exoplanets:(1)a multi-fiber(2000 fibers)medium-resolution spectrometer(R=4000-5000)to spectroscopically map galaxies and large-scale structure;(2)an integral field unit(IFU)array of 500 optical fibers and/or a long-slit spectrograph dedicated to fast follow-ups of transient sources for multi-messenger astronomy;(3)a high-resolution spectrometer(R~100000)designed to identify Jupiter analogs and Earth-like planets,with the capability to characterize the atmospheres of hot exoplanets.展开更多
With the growing significance of space weather forecasting,multi-layer magnetic and helioseismic telescopes are emerging as a key area of research.However,owing to the diverse operational processes and sophisticated h...With the growing significance of space weather forecasting,multi-layer magnetic and helioseismic telescopes are emerging as a key area of research.However,owing to the diverse operational processes and sophisticated hardware configurations of these devices,there is an urgent need for efficient autonomous observation capabilities.An autonomous Master Control System(MCS)can ensure efficient performance,data consistency,and stability,and the prototype presented here adopts a microservices architecture,breaking down the hardware into multiple subsystems and converting their functions into individual services.A central decision-making system leads the operations,supported by three auxiliary systems and three device control systems.Through inter-subsystem service calls,it achieves rapid imaging and spectroscopic monitoring.To verify system stability and observation efficiency,the system was tested on the Solar Full-disk Multi-layer Magnetograph.Experimental results verify this system can operate automatically for 4 consecutive months,acquire photospheric vector magnetic and Doppler velocity fields within a 15-minute interval,and measure chromospheric longitudinal magnetic and Doppler velocity fields in under 180 s.This ensures consistent and stable solar monitoring and serves as a practical methodological benchmark for the development of similar devices.展开更多
Dome A,Antarctica,has been thought to be one of the best astronomical sites on the Earth for decades.Since it was first visited by astronomers in 2008,dozens of facilities for astronomical observation and site testing...Dome A,Antarctica,has been thought to be one of the best astronomical sites on the Earth for decades.Since it was first visited by astronomers in 2008,dozens of facilities for astronomical observation and site testing were deployed.Due to its special geographical location,the data and message exchange between Dome A and the domestic control center could only depend on Iridium.Because the link bandwidth of Iridium is extremely limited,the network traffic cost is quite expensive and the network is rather unstable,the commonly used data transfer tools,such as rsync and scp,are not suitable in this case.In this paper,we design and implement a data transfer tool called NBFTP(narrow bandwidth file transfer protocol)for the astronomical observation of Dome A.NBFTP uses a uniform interface to arrange all types of data and matches specific transmission schemes for different data types according to rules.Break-point resuming and extensibility functions are also implemented.Our experimental results show that NBFTP consumes 60%less network traffic than rsync when detecting the data pending to be transferred.When transferring small files of 1 KB,the network traffic consumption of NBFTP is 40%less than rsync.However,as the file size increases,the network traffic consumption of NBFTP tends to approach rsync,but it is still smaller than rsync.展开更多
The transition region is the key region between the lower solar atmosphere and the corona, which has been limitedly understood by human beings. Therefore, the Solar Upper Transition Region Imager(SUTRI) was proposed b...The transition region is the key region between the lower solar atmosphere and the corona, which has been limitedly understood by human beings. Therefore, the Solar Upper Transition Region Imager(SUTRI) was proposed by Chinese scientists and launched in 2022 July. Right now, the first imaging observation of the upper transition region around 46.5 nm has been carried out by SUTRI. To ensure the spectral and temporal resolution of the SUTRI telescope, we have developed a narrowband Sc/Si multilayer. Based on the extreme ultraviolet(EUV)reflectivity measurements, the multilayer structure has been modified for ensuring the peak position of reflectivity was at 46.5 nm. Finally, the narrowband Sc/Si multilayer was successfully deposited on the hyperboloid primary mirror and secondary mirrors. The deviation of multilayer thickness uniformity was below than 1%, and the average EUV reflectivity at 46.1 nm was 27.8% with a near-normal incident angle of 5°. The calculated bandwidth of the reflectivity curve after primary and secondary mirrors was 2.82 nm, which could ensure the requirements of spectral resolution and reflectivity of SUTRI telescope to achieve its scientific goals.展开更多
The Tian-ma Radio Telescope(TMRT) applies an Active Surface System(ASFS), which corrects for large-scale deformations due to gravity and thermal on the primary reflector. The centralized and automated management of th...The Tian-ma Radio Telescope(TMRT) applies an Active Surface System(ASFS), which corrects for large-scale deformations due to gravity and thermal on the primary reflector. The centralized and automated management of the ASFS using software has become a challenge, for which we have developed the TMRT Active Surface System Control Software(TASCS). This paper describes the design and implementation of TASCS for device control,status monitoring, human-computer interaction, and data management functionalities. TASCS adopts the opensource Tango Controls framework and distributes middleware technology to realize real-time automated adjustment of the primary reflector through remote centralized control of a large number of actuators. At present, it has been successfully deployed on the TMRT and has played an important role in Event Horizon Telescope observations.展开更多
Co-phase and co-focus detection is one of the key technologies for large-aperture segmented mirror telescopes.In this paper,a new edge sensor based on fringes of equal thickness is developed,which can detect each segm...Co-phase and co-focus detection is one of the key technologies for large-aperture segmented mirror telescopes.In this paper,a new edge sensor based on fringes of equal thickness is developed,which can detect each segment's relative piston,tilt,and tip errors from the interferograms.Based on the co-focus demand for many ground-based seeing limited segmented mirror telescopes,an edge sensor prototype based on such a principle is built and applied in the indoor segmented mirror experiment system in the lab.According to the co-focus requirement of the Large Sky Area Multi-Object Fiber Spectroscopic Telescope,many simulations and experiments are carried out for cofocus error detection of the segmented mirror system.Experiment results show that the co-focus accuracy is better than 002 rms,which can meet the co-focus requirements of most large or extremely large segmented mirror astronomical telescopes.展开更多
This paper describes a fabrication process for the hyperboloidal concave mirror of a 46.5 nm telescope. The180 mm aperture hyperboloidal concave mirror and 70 mm aperture compensator are machined directly from chemica...This paper describes a fabrication process for the hyperboloidal concave mirror of a 46.5 nm telescope. The180 mm aperture hyperboloidal concave mirror and 70 mm aperture compensator are machined directly from chemical mechanical polishing of a spherical surface to a high-accuracy aspherical surface by ion beam figuring.The aspherical measurement method is the Dall null test. To minimize system errors in the measurement process,the rotational measurement method with six rotations is used in the null test. The results of the analysis for the ME(first solve the machined surface profile, then solve the system errors) and EM(first solve the system errors, then solve the machined surface profile) methods of calculation in the measurement are given. The ME method is a more accurate rotational test method, and the six rotations are appropriate for rotational measurements. After the figuring process, the hyperboloidal concave mirror surface profile reached 8.27 nm rms and the compensator surface profile is approximately 4 nm rms. The roughness of the hyperboloidal concave mirror is smooth to0.160 nm rms.展开更多
Weak gravitational lensing is a powerful tool in modern cosmology.To accurately measure the weak lensing signal,one has to control the systematic bias on a small level.One of the most difficult problems is how to corr...Weak gravitational lensing is a powerful tool in modern cosmology.To accurately measure the weak lensing signal,one has to control the systematic bias on a small level.One of the most difficult problems is how to correct the smearing effect of the Point-Spread Function(PSF)on the shape of the galaxies.The chromaticity of PSF for a broad-band observation can lead to new subtle effects.Since the PSF is wavelength-dependent and the spectrum energy distributions between stars and galaxies are different,the effective PSF measured from the star images will be different from those that smear the galaxies.Such a bias is called color bias.We estimate it in the optical bands of the Chinese Space Station Survey Telescope from simulated PSFs,and show the dependence on the color and redshift of the galaxies.Moreover,due to the spatial variation of spectra over the galaxy image,another higher-order bias exists:color gradient bias.Our results show that both color bias and color gradient bias are generally below 0.1%in CSST.Only for small-size galaxies,one needs to be careful about the color gradient bias in the weak lensing analysis using CSST data.展开更多
On the arrival of the 20 th anniversary of the journal,Research in Astronomy and Astrophysics(RAA),we see rapid progress in the frontiers of astronomy and astrophysics.To celebrate the birth and growth of RAA,a specia...On the arrival of the 20 th anniversary of the journal,Research in Astronomy and Astrophysics(RAA),we see rapid progress in the frontiers of astronomy and astrophysics.To celebrate the birth and growth of RAA,a special issue consisting of 11 invited reviews from more than 30 authors,mainly from China,has been organized.This is the second volume of the special issues entitled Frontiers in Astrophysics published in RAA.The publication aims at evaluating the current status and key progress in some frontier areas of astronomy and astrophysics with a spirit of guiding future studies.展开更多
The Five-hundred-meter Aperture Spherical radio Telescope(FAST)will be fully commissioned later in 2019.Once commissioned,operation and maintenance of FAST will be the most prominent task.The unique working mode of ac...The Five-hundred-meter Aperture Spherical radio Telescope(FAST)will be fully commissioned later in 2019.Once commissioned,operation and maintenance of FAST will be the most prominent task.The unique working mode of active shape-changing of FAST cable-net structure makes the traditional maintenance way,which combines routine inspection with preventive maintenances not only expensive,but also unable to effectively avoid potential risks in operations.Therefore,it is necessary to develop an economical and reliable operation/maintenance technology for FAST cable-net structure.In this paper,a Prognostics and Health Management(PHM)system is proposed based on the advanced Digital Twin(DT)technology.Through the finite element analysis of DT model,the current safety status of FAST cablenet is evaluated,and the fatigue life of components in the cable-net is predicted.Hence Condition-Based Maintenance(CBM)of FAST cable-net structure can be realized.The PHM system described in this paper can effectively guarantee the healthy and safe operation of the FAST cable-net structure,greatly improve the maintenance efficiency and reduce the cost for maintenance works.展开更多
Radio Frequency System on Chip(RFSo C)offers great potential for implementing a complete next generation signal processing system on a single board for radio astronomy.We designed a pulsar digital backend system based...Radio Frequency System on Chip(RFSo C)offers great potential for implementing a complete next generation signal processing system on a single board for radio astronomy.We designed a pulsar digital backend system based on the ZCU111 board.The system uses RFSo C technology to implement digitization,channelization,correlation and high-speed data transmission in the Xilinx ZU28 DR device.We have evaluated the performance of the eight 12-bit RF-ADCs,which are integrated in RFSo C,with the maximum sampling rate of 4.096 GSPS.The RF-ADC sampling frequency,channel bandwidth and time resolution can be configured dynamically in our designed system.To verify the system performance,we deployed the RFSo C board on the Nanshan 26 m radio telescope and observed the pulsar signal with a frequency resolution of 1 MHz and time resolution of 64μs.In the observation test,we obtained pulsar profiles with high signal-to-noise ratio and accurately searched the DM values.The experimental results show that the performance of RF-ADCs,FPGA and CPU cores in RFSo C is sufficient for radio astronomy signal processing applications.展开更多
The reflector system of the Five-hundred-meter Aperture Spherical radio Telescope (FAST) is designed to incorporate 4450 rigid panels supported by a flexible cable-net structure. The shapechanging operation that occ...The reflector system of the Five-hundred-meter Aperture Spherical radio Telescope (FAST) is designed to incorporate 4450 rigid panels supported by a flexible cable-net structure. The shapechanging operation that occurs in the process of observation will lead to a relative displacement between adjacent nodes in the cable-net. In addition, three nodes on a rigid panel are fixed with respect to each other. Thus, adaptive connecting mechanisms between panels and the cable-net are certainly needed. The present work focuses on the following aspects. Firstly, the degrees of freedom of adaptive connecting mechanisms were designed so that we can not only adapt the panel to the deformation of the cable- net, but also restrict the panel to its right place. Secondly, finite element and theoretical analyses were applied to calculate the scope of motion in adaptive connecting mechanisms during the cable-net's shape-changing operation, thus providing input parameters for the design size of the adaptive connecting mechanisms. In addition, the gap size between the panels is also investigated to solve the trade-off between avoiding panel collisions and increasing the observation efficiency of FAST.展开更多
Mirror seeing will be one of the key factors influencing image quality of an extremely large ground-based optical telescope (ELT). Computational fluid dynamics (CFD) can be used to estimate the mirror seeing and t...Mirror seeing will be one of the key factors influencing image quality of an extremely large ground-based optical telescope (ELT). Computational fluid dynamics (CFD) can be used to estimate the mirror seeing and the effects of ventilation. In this paper, we present a simplified approach to simulation of mirror seeing for the Chinese Future Giant Telescope (CFGT, 30 m in diameter) with the CFD software ANSYS Icepak. We get the FWHM of the image and the distribution of refractive index structure function (CN2) above the mirror. We demonstrate that thermal control and ventilation are effective ways to improve the image quality. Our simulation results agree with those of other authors for the ELT. To reduce the mirror seeing to a level of 0.5", the suggested temperature excess of the primary mirror above the ambient air for thermal control of the CFGT is 0 - 2 K according to the present results of weakly forced convection. The limitations of the method are also discussed.展开更多
Most reflector surface holographic measurements of a large radio telescope utilize a geostationary satellite as the signal source. The shortcoming is that those measurements could only be done at a limited elevation a...Most reflector surface holographic measurements of a large radio telescope utilize a geostationary satellite as the signal source. The shortcoming is that those measurements could only be done at a limited elevation angle due to the satellite’s relatively stationary state. This paper proposed a new wideband microwave holographic measurement method based on radio sources to achieve full-elevation-angle measurement with small size reference antenna. In theoretical derivation, the time delay and phase change due to path length and device difference between the antenna under test and reference antenna are compensated first. Then the correct method of wideband holography effect, which is because of antenna pattern differing under different wavelengths when receiving a wideband signal, is presented. To verify the proposed methodology, a wideband microwave holographic measurement system is established, the data processing procedure is illustrated, and the reflector surface measurement experiments on a 40 m radio telescope at different elevation angles are conducted. The result shows that the primary reflector surface root-mean-square at around elevation angles of 28°, 44°, 49°, and 75° are respectively 0.213 mm, 0.170 mm, 0.188 mm, and 0.199 mm. It is basically consistent with the real data, indicating that the proposed wideband microwave holography methodology is feasible.展开更多
The new Wuqing 70 m radio telescope is first used for the downlink data reception in the first Mars exploration mission of China,and will be used for the other deep space communications and radio astronomical observat...The new Wuqing 70 m radio telescope is first used for the downlink data reception in the first Mars exploration mission of China,and will be used for the other deep space communications and radio astronomical observations in the future.The main specifications and measurement results of some properties in the X-band are introduced in this paper,such as pointing calibration,gain and efficiency,system noise temperature,system equivalent flux density,and variations with elevation.The 23 parameters pointing calibration model considering the atmospheric refraction correction in real time is presented in the telescope,and the pointing accuracy reaches 570 in azimuth direction and 607 in elevation direction for different weather conditions.More than 62%efficiencies are achieved at full elevation range,and more than 70%in the mid-elevation.The system equivalent flux density of the X-band in the mid-elevation reaches 26 Jy.展开更多
The CCD photometric observations of open star cluster M37(NGC 2099) were carried out up to a limiting magnitude of V ~ 20 in both B and V filters to search for variable stars using a 2k×4k CCD and the 1.3 m tele...The CCD photometric observations of open star cluster M37(NGC 2099) were carried out up to a limiting magnitude of V ~ 20 in both B and V filters to search for variable stars using a 2k×4k CCD and the 1.3 m telescope at the Vainu Bapu Observatory, Kavalur.A total of 314 stars were in the first observing run, out of which 60 were identified as variables.Eight out of the identified 60 variables are classified as W UMa binary stars.For model fitting, we used PHOEBE based on the W-D code to estimate the physical parameters of these newly detected W UMa binaries that theoretically best match the observed light curves.展开更多
The National Solar Observatory is currently developing the Accurate Infrared Magnetic Field Measurements of the Sun(AIMS). The primary mirror of the AIMS solar telescope is an off-axis parabolic with a diameter of 1 m...The National Solar Observatory is currently developing the Accurate Infrared Magnetic Field Measurements of the Sun(AIMS). The primary mirror of the AIMS solar telescope is an off-axis parabolic with a diameter of 1 m and with a large off-axis amount of 1 m. Due to the surface figure of the primary mirror under the used state is directly related to image quality of the whole system, a computer-generated hologram(CGH) is carried out to test the primary mirror, and the test results are used to polish the mirror to a higher surface accuracy. However, the fact that the distortion exists in the testing results leads to the failure of a further guide to deterministic optical processing. In this paper, a distortion correction method is proposed, which uses an orthogonal set of vector polynomials to mapping the coordinates of the mirror and the pixels of fringes, and then an interpolation method is adopted to obtain the corrected results. The testing accuracy by using CGH is also verified by an auto-collimate test experiment. According to the distorted corrected results, the root-mean-square of the surface figure is about 1/50λ(λ=632.8 nm) after polishing.展开更多
Non-Common Path Error(NCPE) is one of the factors that limit an Adaptive Optics(AO)system from delivering ultra-high performance. To correct the NCPE associated static aberration, we propose a simple but robust and hi...Non-Common Path Error(NCPE) is one of the factors that limit an Adaptive Optics(AO)system from delivering ultra-high performance. To correct the NCPE associated static aberration, we propose a simple but robust and high-performance pupil-plane based wavefront measurement and correction technique, which can copy a single-mode fiber generated perfect wavefront to the AO system via an iteration optimization process, and the NCPE can be effectively corrected by directly commanding the Deformable Mirror(DM) of the AO system. Compared with the previous focal-plane based approach that uses focal plane based Point Spread Function(PSF) for correction evaluation, the pupil-plane based approach can be reliably and rapidly converged to a global optimization result and provides better performance, in particular for an AO system with a large initial static wavefront error. This technique we proposed can be implemented in astronomical AO systems where extremely high performance is required.展开更多
It is widely accepted that mirror seeing is caused by turbulent fluctuations in the index of air refraction in the vicinity of a telescope mirror. Computational Fluid Dynamics(CFD) is a useful tool to evaluate the e...It is widely accepted that mirror seeing is caused by turbulent fluctuations in the index of air refraction in the vicinity of a telescope mirror. Computational Fluid Dynamics(CFD) is a useful tool to evaluate the effects of mirror seeing. In this paper, we present a numerical method to estimate the mirror seeing for a large optical telescope(~ 4 m) in cases of natural convection with the ANSYS ICEPAK software. We get the FWHM of the image for different inclination angles(i) of the mirror and different temperature differences(△T) between the mirror and ambient air. Our results show that the mirror seeing depends very weakly on i, which agrees with observational data from the Canada-FranceHawaii Telescope. The numerical model can be used to estimate mirror seeing in the case of natural convection although with some limitations. We can determine △T for thermal control of the primary mirror according to the simulation, empirical data and site seeing.展开更多
Photometric observations of AH Cnc, a W UMa-type system in the open cluster M67, were car- fled out by using the 50BIN telescope. About 100h of time-series/3- and V-band data were taken, based on which eight new times...Photometric observations of AH Cnc, a W UMa-type system in the open cluster M67, were car- fled out by using the 50BIN telescope. About 100h of time-series/3- and V-band data were taken, based on which eight new times of light minima were determined. By applying the Wilson-Devinney method, the light curves were modeled and a revised photometric solution of the binary system was derived. We con- firmed that AH Cnc is a deep contact (f = 51%), low mass-ratio (q - 0.156) system. Adopting the distance modulus derived from study of the host cluster, we have re-calculated the physical parameters of the binary system, namely the masses and radii. The masses and radii of the two components were estimated to be respectively 1.188(4-0.061) Me, 1.332(4-0.063) RQ for the primary component and 0.185(4-0.032) Me, 0.592(4-0.051) Re for the secondary. By adding the newly derived minimum timings to all the available data, the period variations of AH Cnc were studied. This shows that the orbital period of the binary is con- tinuously increasing at a rate of dp/dt = 4.29 x 10-10 d yr-1. In addition to the long-term period increase, a cyclic variation with a period of 35.26 yr was determined, which could be attributed to an unresolved tertiary component of the system.展开更多
基金This work is supported by“the Fundamental Research Funds for the Central Universities”,111 project No.B20019Shanghai Natural Science Foundation,grant No.19ZR1466800.
文摘The Jiao Tong University Spectroscopic Telescope(JUST)is a 4.4-meter f/6.0 segmented-mirror telescope dedicated to spectroscopic observations.The JUST primary mirror is composed of 18 hexagonal segments,each with a diameter of 1.1 m.JUST provides two Nasmyth platforms for placing science instruments.One Nasmyth focus fits a field of view of 10′and the other has an extended field of view of 1.2°with correction optics.A tertiary mirror is used to switch between the two Nasmyth foci.JUST will be installed at a site at Lenghu in Qinghai Province,China,and will conduct spectroscopic observations with three types of instruments to explore the dark universe,trace the dynamic universe,and search for exoplanets:(1)a multi-fiber(2000 fibers)medium-resolution spectrometer(R=4000-5000)to spectroscopically map galaxies and large-scale structure;(2)an integral field unit(IFU)array of 500 optical fibers and/or a long-slit spectrograph dedicated to fast follow-ups of transient sources for multi-messenger astronomy;(3)a high-resolution spectrometer(R~100000)designed to identify Jupiter analogs and Earth-like planets,with the capability to characterize the atmospheres of hot exoplanets.
基金supported by the National Key R&D Program of China (2022YFF0503800)the Chinese Meridian Project,the National Natural Science Foundation of China (11427901)+1 种基金the Strategic Priority Research Program of the Chinese Academy of Sciences (XDA15320102)the Youth Innovation Promotion Association (2022057).
文摘With the growing significance of space weather forecasting,multi-layer magnetic and helioseismic telescopes are emerging as a key area of research.However,owing to the diverse operational processes and sophisticated hardware configurations of these devices,there is an urgent need for efficient autonomous observation capabilities.An autonomous Master Control System(MCS)can ensure efficient performance,data consistency,and stability,and the prototype presented here adopts a microservices architecture,breaking down the hardware into multiple subsystems and converting their functions into individual services.A central decision-making system leads the operations,supported by three auxiliary systems and three device control systems.Through inter-subsystem service calls,it achieves rapid imaging and spectroscopic monitoring.To verify system stability and observation efficiency,the system was tested on the Solar Full-disk Multi-layer Magnetograph.Experimental results verify this system can operate automatically for 4 consecutive months,acquire photospheric vector magnetic and Doppler velocity fields within a 15-minute interval,and measure chromospheric longitudinal magnetic and Doppler velocity fields in under 180 s.This ensures consistent and stable solar monitoring and serves as a practical methodological benchmark for the development of similar devices.
基金supported by the Joint Research Fund in Astronomy(U1931130)under the cooperative agreement between the National Natural Science Foundation of China(NSFC)and the Chinese Academy of Sciences(CAS)support from NFSC(Grant Nos.11873010and 117330037)the Operation,Maintenance and Upgrading Fund for Astronomical Telescopes,and Facility Instruments,budgeted from the Ministry of Finance of China(MOF)and administrated by the CAS。
文摘Dome A,Antarctica,has been thought to be one of the best astronomical sites on the Earth for decades.Since it was first visited by astronomers in 2008,dozens of facilities for astronomical observation and site testing were deployed.Due to its special geographical location,the data and message exchange between Dome A and the domestic control center could only depend on Iridium.Because the link bandwidth of Iridium is extremely limited,the network traffic cost is quite expensive and the network is rather unstable,the commonly used data transfer tools,such as rsync and scp,are not suitable in this case.In this paper,we design and implement a data transfer tool called NBFTP(narrow bandwidth file transfer protocol)for the astronomical observation of Dome A.NBFTP uses a uniform interface to arrange all types of data and matches specific transmission schemes for different data types according to rules.Break-point resuming and extensibility functions are also implemented.Our experimental results show that NBFTP consumes 60%less network traffic than rsync when detecting the data pending to be transferred.When transferring small files of 1 KB,the network traffic consumption of NBFTP is 40%less than rsync.However,as the file size increases,the network traffic consumption of NBFTP tends to approach rsync,but it is still smaller than rsync.
基金funded by the National Natural Science Foundation of China (NSFC) under Nos. 12003016, 12204353and 62105244。
文摘The transition region is the key region between the lower solar atmosphere and the corona, which has been limitedly understood by human beings. Therefore, the Solar Upper Transition Region Imager(SUTRI) was proposed by Chinese scientists and launched in 2022 July. Right now, the first imaging observation of the upper transition region around 46.5 nm has been carried out by SUTRI. To ensure the spectral and temporal resolution of the SUTRI telescope, we have developed a narrowband Sc/Si multilayer. Based on the extreme ultraviolet(EUV)reflectivity measurements, the multilayer structure has been modified for ensuring the peak position of reflectivity was at 46.5 nm. Finally, the narrowband Sc/Si multilayer was successfully deposited on the hyperboloid primary mirror and secondary mirrors. The deviation of multilayer thickness uniformity was below than 1%, and the average EUV reflectivity at 46.1 nm was 27.8% with a near-normal incident angle of 5°. The calculated bandwidth of the reflectivity curve after primary and secondary mirrors was 2.82 nm, which could ensure the requirements of spectral resolution and reflectivity of SUTRI telescope to achieve its scientific goals.
基金supported by the National SKA Program of China,No. 2020SKA0120104the Natural Science Foundation of Shanghai,No. 20ZR1467600。
文摘The Tian-ma Radio Telescope(TMRT) applies an Active Surface System(ASFS), which corrects for large-scale deformations due to gravity and thermal on the primary reflector. The centralized and automated management of the ASFS using software has become a challenge, for which we have developed the TMRT Active Surface System Control Software(TASCS). This paper describes the design and implementation of TASCS for device control,status monitoring, human-computer interaction, and data management functionalities. TASCS adopts the opensource Tango Controls framework and distributes middleware technology to realize real-time automated adjustment of the primary reflector through remote centralized control of a large number of actuators. At present, it has been successfully deployed on the TMRT and has played an important role in Event Horizon Telescope observations.
基金Guo Shou Jing Telescope(the Large Sky Area Multi-Object Fiber Spectroscopic Telescope)is a National Major Scientific Project built by the Chinese Academy of Sciences.Funding for the project has been provided by the National Development and Reform Commissionsupported by the National Key R&D Program of China(Grant Nos.2022YFA1603002,2022YFA1603001,2021YFC2801402 and SQ2021YFC2800011)the National Natural Science Foundation of China(Grant Nos.U2031207,U1931207,12073053,and 1331204)。
文摘Co-phase and co-focus detection is one of the key technologies for large-aperture segmented mirror telescopes.In this paper,a new edge sensor based on fringes of equal thickness is developed,which can detect each segment's relative piston,tilt,and tip errors from the interferograms.Based on the co-focus demand for many ground-based seeing limited segmented mirror telescopes,an edge sensor prototype based on such a principle is built and applied in the indoor segmented mirror experiment system in the lab.According to the co-focus requirement of the Large Sky Area Multi-Object Fiber Spectroscopic Telescope,many simulations and experiments are carried out for cofocus error detection of the segmented mirror system.Experiment results show that the co-focus accuracy is better than 002 rms,which can meet the co-focus requirements of most large or extremely large segmented mirror astronomical telescopes.
基金funded by the National Key R&D Program of China (2022YFF0709101)the National Natural Science Foundation of China (NSFC) under Nos. 62105244 and 61621001。
文摘This paper describes a fabrication process for the hyperboloidal concave mirror of a 46.5 nm telescope. The180 mm aperture hyperboloidal concave mirror and 70 mm aperture compensator are machined directly from chemical mechanical polishing of a spherical surface to a high-accuracy aspherical surface by ion beam figuring.The aspherical measurement method is the Dall null test. To minimize system errors in the measurement process,the rotational measurement method with six rotations is used in the null test. The results of the analysis for the ME(first solve the machined surface profile, then solve the system errors) and EM(first solve the system errors, then solve the machined surface profile) methods of calculation in the measurement are given. The ME method is a more accurate rotational test method, and the six rotations are appropriate for rotational measurements. After the figuring process, the hyperboloidal concave mirror surface profile reached 8.27 nm rms and the compensator surface profile is approximately 4 nm rms. The roughness of the hyperboloidal concave mirror is smooth to0.160 nm rms.
基金funded by the National Natural Science Foundation of China(NSFC)under Nos.11873006,11933002,11903082,and U1931210the science research grants from the China Manned Space Project with Nos.CMS-CSST-2021-A01,CMS-CSST-2021A12,and CMS-CSST-2021-A07。
文摘Weak gravitational lensing is a powerful tool in modern cosmology.To accurately measure the weak lensing signal,one has to control the systematic bias on a small level.One of the most difficult problems is how to correct the smearing effect of the Point-Spread Function(PSF)on the shape of the galaxies.The chromaticity of PSF for a broad-band observation can lead to new subtle effects.Since the PSF is wavelength-dependent and the spectrum energy distributions between stars and galaxies are different,the effective PSF measured from the star images will be different from those that smear the galaxies.Such a bias is called color bias.We estimate it in the optical bands of the Chinese Space Station Survey Telescope from simulated PSFs,and show the dependence on the color and redshift of the galaxies.Moreover,due to the spatial variation of spectra over the galaxy image,another higher-order bias exists:color gradient bias.Our results show that both color bias and color gradient bias are generally below 0.1%in CSST.Only for small-size galaxies,one needs to be careful about the color gradient bias in the weak lensing analysis using CSST data.
文摘On the arrival of the 20 th anniversary of the journal,Research in Astronomy and Astrophysics(RAA),we see rapid progress in the frontiers of astronomy and astrophysics.To celebrate the birth and growth of RAA,a special issue consisting of 11 invited reviews from more than 30 authors,mainly from China,has been organized.This is the second volume of the special issues entitled Frontiers in Astrophysics published in RAA.The publication aims at evaluating the current status and key progress in some frontier areas of astronomy and astrophysics with a spirit of guiding future studies.
基金supported by the National Natural Science Foundation of China(Grant No.11673039)the Open Project Program of the Key Laboratory of FAST,National Astronomical Observatories,Chinese Academy of Sciences
文摘The Five-hundred-meter Aperture Spherical radio Telescope(FAST)will be fully commissioned later in 2019.Once commissioned,operation and maintenance of FAST will be the most prominent task.The unique working mode of active shape-changing of FAST cable-net structure makes the traditional maintenance way,which combines routine inspection with preventive maintenances not only expensive,but also unable to effectively avoid potential risks in operations.Therefore,it is necessary to develop an economical and reliable operation/maintenance technology for FAST cable-net structure.In this paper,a Prognostics and Health Management(PHM)system is proposed based on the advanced Digital Twin(DT)technology.Through the finite element analysis of DT model,the current safety status of FAST cablenet is evaluated,and the fatigue life of components in the cable-net is predicted.Hence Condition-Based Maintenance(CBM)of FAST cable-net structure can be realized.The PHM system described in this paper can effectively guarantee the healthy and safe operation of the FAST cable-net structure,greatly improve the maintenance efficiency and reduce the cost for maintenance works.
基金supported by the National Natural Science Foundation of China(Grant No.12073067)the program of the Light in China’s Western Region(2019-XBQNXZ-B-018)the Youth Innovation Promotion Association of CAS(2021059)。
文摘Radio Frequency System on Chip(RFSo C)offers great potential for implementing a complete next generation signal processing system on a single board for radio astronomy.We designed a pulsar digital backend system based on the ZCU111 board.The system uses RFSo C technology to implement digitization,channelization,correlation and high-speed data transmission in the Xilinx ZU28 DR device.We have evaluated the performance of the eight 12-bit RF-ADCs,which are integrated in RFSo C,with the maximum sampling rate of 4.096 GSPS.The RF-ADC sampling frequency,channel bandwidth and time resolution can be configured dynamically in our designed system.To verify the system performance,we deployed the RFSo C board on the Nanshan 26 m radio telescope and observed the pulsar signal with a frequency resolution of 1 MHz and time resolution of 64μs.In the observation test,we obtained pulsar profiles with high signal-to-noise ratio and accurately searched the DM values.The experimental results show that the performance of RF-ADCs,FPGA and CPU cores in RFSo C is sufficient for radio astronomy signal processing applications.
基金supported by the National Natural Science Foundation of China(Grant Nos.11303059 and 11673039)the Chinese Academy of Sciences Youth Innovation Promotion Association+1 种基金CAS Key Technology Talent Programthe FAST FELLOWSHIP.The FAST FELLOWSHIP is supported by Special Funding for Advanced Users,budgeted and administrated by the Center for Astronomical MegaScience,Chinese Academy of Sciences(CAMS)
文摘The reflector system of the Five-hundred-meter Aperture Spherical radio Telescope (FAST) is designed to incorporate 4450 rigid panels supported by a flexible cable-net structure. The shapechanging operation that occurs in the process of observation will lead to a relative displacement between adjacent nodes in the cable-net. In addition, three nodes on a rigid panel are fixed with respect to each other. Thus, adaptive connecting mechanisms between panels and the cable-net are certainly needed. The present work focuses on the following aspects. Firstly, the degrees of freedom of adaptive connecting mechanisms were designed so that we can not only adapt the panel to the deformation of the cable- net, but also restrict the panel to its right place. Secondly, finite element and theoretical analyses were applied to calculate the scope of motion in adaptive connecting mechanisms during the cable-net's shape-changing operation, thus providing input parameters for the design size of the adaptive connecting mechanisms. In addition, the gap size between the panels is also investigated to solve the trade-off between avoiding panel collisions and increasing the observation efficiency of FAST.
基金the support of the Large Scientific Equipments Repairing Project of Chinese Academy of Sciences:"Cooling Facility and Monitoring instruments for LAMOST Dome Seeing Improvement"
文摘Mirror seeing will be one of the key factors influencing image quality of an extremely large ground-based optical telescope (ELT). Computational fluid dynamics (CFD) can be used to estimate the mirror seeing and the effects of ventilation. In this paper, we present a simplified approach to simulation of mirror seeing for the Chinese Future Giant Telescope (CFGT, 30 m in diameter) with the CFD software ANSYS Icepak. We get the FWHM of the image and the distribution of refractive index structure function (CN2) above the mirror. We demonstrate that thermal control and ventilation are effective ways to improve the image quality. Our simulation results agree with those of other authors for the ELT. To reduce the mirror seeing to a level of 0.5", the suggested temperature excess of the primary mirror above the ambient air for thermal control of the CFGT is 0 - 2 K according to the present results of weakly forced convection. The limitations of the method are also discussed.
基金funded by the Astronomical Joint Fund of the National Natural Science Foundation of China and Chinese Academy of Sciences (Grant Nos. U1831114, 11941002, and12073048)。
文摘Most reflector surface holographic measurements of a large radio telescope utilize a geostationary satellite as the signal source. The shortcoming is that those measurements could only be done at a limited elevation angle due to the satellite’s relatively stationary state. This paper proposed a new wideband microwave holographic measurement method based on radio sources to achieve full-elevation-angle measurement with small size reference antenna. In theoretical derivation, the time delay and phase change due to path length and device difference between the antenna under test and reference antenna are compensated first. Then the correct method of wideband holography effect, which is because of antenna pattern differing under different wavelengths when receiving a wideband signal, is presented. To verify the proposed methodology, a wideband microwave holographic measurement system is established, the data processing procedure is illustrated, and the reflector surface measurement experiments on a 40 m radio telescope at different elevation angles are conducted. The result shows that the primary reflector surface root-mean-square at around elevation angles of 28°, 44°, 49°, and 75° are respectively 0.213 mm, 0.170 mm, 0.188 mm, and 0.199 mm. It is basically consistent with the real data, indicating that the proposed wideband microwave holography methodology is feasible.
基金funded by the Astronomical Joint Fund of the National Natural Science Foundation of China and Chinese Academy of Sciences(U1831114)。
文摘The new Wuqing 70 m radio telescope is first used for the downlink data reception in the first Mars exploration mission of China,and will be used for the other deep space communications and radio astronomical observations in the future.The main specifications and measurement results of some properties in the X-band are introduced in this paper,such as pointing calibration,gain and efficiency,system noise temperature,system equivalent flux density,and variations with elevation.The 23 parameters pointing calibration model considering the atmospheric refraction correction in real time is presented in the telescope,and the pointing accuracy reaches 570 in azimuth direction and 607 in elevation direction for different weather conditions.More than 62%efficiencies are achieved at full elevation range,and more than 70%in the mid-elevation.The system equivalent flux density of the X-band in the mid-elevation reaches 26 Jy.
文摘The CCD photometric observations of open star cluster M37(NGC 2099) were carried out up to a limiting magnitude of V ~ 20 in both B and V filters to search for variable stars using a 2k×4k CCD and the 1.3 m telescope at the Vainu Bapu Observatory, Kavalur.A total of 314 stars were in the first observing run, out of which 60 were identified as variables.Eight out of the identified 60 variables are classified as W UMa binary stars.For model fitting, we used PHOEBE based on the W-D code to estimate the physical parameters of these newly detected W UMa binaries that theoretically best match the observed light curves.
基金funded by the West Light Foundation of the Chinese Academy of Sciences(Grant No.XAB2017B13)the National Natural Science Foundation of China(Grant No.11703072)。
文摘The National Solar Observatory is currently developing the Accurate Infrared Magnetic Field Measurements of the Sun(AIMS). The primary mirror of the AIMS solar telescope is an off-axis parabolic with a diameter of 1 m and with a large off-axis amount of 1 m. Due to the surface figure of the primary mirror under the used state is directly related to image quality of the whole system, a computer-generated hologram(CGH) is carried out to test the primary mirror, and the test results are used to polish the mirror to a higher surface accuracy. However, the fact that the distortion exists in the testing results leads to the failure of a further guide to deterministic optical processing. In this paper, a distortion correction method is proposed, which uses an orthogonal set of vector polynomials to mapping the coordinates of the mirror and the pixels of fringes, and then an interpolation method is adopted to obtain the corrected results. The testing accuracy by using CGH is also verified by an auto-collimate test experiment. According to the distorted corrected results, the root-mean-square of the surface figure is about 1/50λ(λ=632.8 nm) after polishing.
文摘Non-Common Path Error(NCPE) is one of the factors that limit an Adaptive Optics(AO)system from delivering ultra-high performance. To correct the NCPE associated static aberration, we propose a simple but robust and high-performance pupil-plane based wavefront measurement and correction technique, which can copy a single-mode fiber generated perfect wavefront to the AO system via an iteration optimization process, and the NCPE can be effectively corrected by directly commanding the Deformable Mirror(DM) of the AO system. Compared with the previous focal-plane based approach that uses focal plane based Point Spread Function(PSF) for correction evaluation, the pupil-plane based approach can be reliably and rapidly converged to a global optimization result and provides better performance, in particular for an AO system with a large initial static wavefront error. This technique we proposed can be implemented in astronomical AO systems where extremely high performance is required.
基金support from the Guo Shou Jing Telescope(the Large Sky Area Multi-Object Fiber Spectroscopic Telescope,LAMOST)the Large Scientific Equipments Repairing Project of Chinese Academy of Sciences:"Cooling Facility and Monitoring Instruments for LAMOST Dome Seeing Improvement."supported by National Key Basic Research Program of China Y41J051N01
文摘It is widely accepted that mirror seeing is caused by turbulent fluctuations in the index of air refraction in the vicinity of a telescope mirror. Computational Fluid Dynamics(CFD) is a useful tool to evaluate the effects of mirror seeing. In this paper, we present a numerical method to estimate the mirror seeing for a large optical telescope(~ 4 m) in cases of natural convection with the ANSYS ICEPAK software. We get the FWHM of the image for different inclination angles(i) of the mirror and different temperature differences(△T) between the mirror and ambient air. Our results show that the mirror seeing depends very weakly on i, which agrees with observational data from the Canada-FranceHawaii Telescope. The numerical model can be used to estimate mirror seeing in the case of natural convection although with some limitations. We can determine △T for thermal control of the primary mirror according to the simulation, empirical data and site seeing.
基金supported by the National Natural Science Foundation of China(Nos. U1131121,11303021,U1231202,11473037 and 11373073)
文摘Photometric observations of AH Cnc, a W UMa-type system in the open cluster M67, were car- fled out by using the 50BIN telescope. About 100h of time-series/3- and V-band data were taken, based on which eight new times of light minima were determined. By applying the Wilson-Devinney method, the light curves were modeled and a revised photometric solution of the binary system was derived. We con- firmed that AH Cnc is a deep contact (f = 51%), low mass-ratio (q - 0.156) system. Adopting the distance modulus derived from study of the host cluster, we have re-calculated the physical parameters of the binary system, namely the masses and radii. The masses and radii of the two components were estimated to be respectively 1.188(4-0.061) Me, 1.332(4-0.063) RQ for the primary component and 0.185(4-0.032) Me, 0.592(4-0.051) Re for the secondary. By adding the newly derived minimum timings to all the available data, the period variations of AH Cnc were studied. This shows that the orbital period of the binary is con- tinuously increasing at a rate of dp/dt = 4.29 x 10-10 d yr-1. In addition to the long-term period increase, a cyclic variation with a period of 35.26 yr was determined, which could be attributed to an unresolved tertiary component of the system.