The atmospheric CH\-4 in Beijing is still increasing, even though its increasing rate has significantly decreased from 1.76%/a during 1985—1989 to 0.50%/a during 1990—1997. The seasonal variation of CH\-4 concen...The atmospheric CH\-4 in Beijing is still increasing, even though its increasing rate has significantly decreased from 1.76%/a during 1985—1989 to 0.50%/a during 1990—1997. The seasonal variation of CH\-4 concentration showed a double\|peak pattern, one peak appearing in winter and the other in summer. It is evident that the annually seasonal variations of atmospheric CH\-4 in Beijing are different. From 1986 to 1997, the atmospheric CH\-4 increased by 185 ppbv, 37% and 21% of which were due to the increase in winter and in summer, respectively. After 1993, the annually seasonal increasing rate of CH\-4 concentration in summer (due to emission from biogenic sources) is negative while the increasing rate in winter (due to emission from non\|biogenic sources) is positive about 25 ppbv/a. As a result, the increase of CH\-4 emission from non\|biogenic sources in winter is the major reason that caused the annually seasonal increasing rate from 1993 to 1997. The biogenic sources in Beijing are shrinking while the non\|biogenic ones (such as fossil fuel combustion) are enlarging.展开更多
The high observation efficiency,scanning speed and observation frequency of the Fengyun-4A(FY-4A)satellite indicates the progress of Chinese geostationary meteorological satellites.The characteristics of FY-4A atmosph...The high observation efficiency,scanning speed and observation frequency of the Fengyun-4A(FY-4A)satellite indicates the progress of Chinese geostationary meteorological satellites.The characteristics of FY-4A atmospheric motion vectors(AMVs)derived from the high-level water vapor(WV-High)channel,mid-level water vapor(WV-Mid)channel,and infrared(IR)channel of FY-4A are analyzed,and their corresponding observation errors estimated.Then,the impacts of single-channel and multi-channel FY-4A AMVs on RMAPS-ST(the Rapid-refresh Multi-scale Analysis and Prediction System-Short Term)are evaluated based on one-month data assimilation cycling and forecasting experiments.Results show that the observation errors of FY-4A AMVs from the three channels have an explicit vertical structure.Results from the cycling experiments indicate that the assimilation of AMVs from WV-High produces more apparent improvement of the wind in the upper layer,while a more positive effect in the lower layer is achieved by the assimilation of AMVs from IR.Furthermore,the assimilation of AMVs from IR is more skillful for medium and moderate precipitation than from other channels owing to the good quality of data in the lower layer in the AMVs from IR.Assimilation of FY-4A AMVs from the three channels could combine the advantages of assimilation from each individual channel to improve the wind in the upper,middle and lower layers simultaneously.展开更多
Influence of NH_4 Cl on the initial atmospheric corrosion of zinc was investigated viaquartz crystal microbalance (QCM) in laboratory at 80%RH and 25℃. The resultsshow that NH_4 Cl can accelerate the initial corrosio...Influence of NH_4 Cl on the initial atmospheric corrosion of zinc was investigated viaquartz crystal microbalance (QCM) in laboratory at 80%RH and 25℃. The resultsshow that NH_4 Cl can accelerate the initial corrosion of zinc. Mass gain increase withthe exposure time, but mass gain in the later doesn't change obviously due to theformation of the insoluble simonkolleite on zinc surface in the presence of NH_4 Cl.Fourier transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD) wasused to characterize the corrosion products. Zn_5Cl_2(OH)_8·H_2O,(NH_4)_2ZnCl_4 andZnO are the corrosion products on zinc. Brief discussion on the mechanisms of at-mospheric corrosion of zinc in the presence of NH_4 Cl was introduced.展开更多
Reactions between CH_4 and CO_2 under the action of continuous microwave discharge at atmospheric pressure were studied in a special homemade reactor. The main products were CO and H2, while acetylene and ethylene wer...Reactions between CH_4 and CO_2 under the action of continuous microwave discharge at atmospheric pressure were studied in a special homemade reactor. The main products were CO and H2, while acetylene and ethylene were also found in the products. Experimental results show that conversions of CH4 and CO2 could be higher than 90% without the presence of any catalyst. Effects of CO2/CH4 molar ratio and total flow rate of the feed gas on the reaction were also investigated.展开更多
We analyze sea ice changes from eight different earth system models that have conducted experiment abrupt4xCO2 of the Coupled Model Intercomparison Project Phase 5 （CMIP5）. In response to abrupt quadrupling of CO2 f...We analyze sea ice changes from eight different earth system models that have conducted experiment abrupt4xCO2 of the Coupled Model Intercomparison Project Phase 5 （CMIP5）. In response to abrupt quadrupling of CO2 from preindustrial levels, Arctic temperatures dramatically rise by about 10℃--16℃ in winter and the seasonal sea ice cycle and sea ice concentration are significantly changed compared with the pre-industrial control simulations （piControl）. Changes of Arctic sea ice concentration are spatially correlated with temperature patterns in all seasons and highest in autumn. Changes in sea ice are associated with changes in atmospheric circulation patterns at heights up to the jet stream. While the pattern of sea level pressure changes is generally similar to the surface air temperature change pattern, the wintertime 500 hPa circulation displays a positive Pacific North America （PNA） anomaly under abrupt4xCO2-piControl. This large scale teleconnection may contribute to, or feedback on, the simulated sea ice cover change and is associated with an intensification of the jet stream over East Asia and the north Pacific in winter.展开更多
Deposition of TiO2 film from atmospheric pressure non- equilibrium Ar/O2/TiCl4 plasma was done to study the effect of discharge power during the film deposition process in this paper. TiO2 films with kinds of morpholo...Deposition of TiO2 film from atmospheric pressure non- equilibrium Ar/O2/TiCl4 plasma was done to study the effect of discharge power during the film deposition process in this paper. TiO2 films with kinds of morphologies and controlled crystallization were deposited from mixtures of TiCl4 and O2 on quartz substrate by one step process. Scanning electron microscope （SEM） and transmission electron microscope （TEM） were used to analyze the morphology and crystallization of the deposited TiO2 films. It was found that the discharge power played a key role in the morphology and crystallization of the deposited TiO2 film whether the flow of TiCl4was large or small. When the flow of TiCl4 was large, the deposited TiO2 film was amorphous particles at low discharge power and was multi-crystalline at high discharge power. When the flow of TiCl4 was small, the deposited TiO2 film became more compact and the crystallization was enhanced as the discharge power increased. The dependence of the discharge current and the applied voltage with the discharge power indicated that it was a glow discharge. The gas temperature which increases with the discharge power is one of the main causes that affect the morphology and crystallization of the deposited film.展开更多
A comparative study on the corrosion resistance of 17Ni/（NiFe2O4-10NiO） cermet inert anode prepared in differentsintering atmospheres was conducted in Na3AlF6-Al2O3 melt. The results indicate that the corrosion rate...A comparative study on the corrosion resistance of 17Ni/（NiFe2O4-10NiO） cermet inert anode prepared in differentsintering atmospheres was conducted in Na3AlF6-Al2O3 melt. The results indicate that the corrosion rates of NiFe2O4-based cermetanodes prepared in the vacuum and the atmosphere with oxygen content of 2×10^-3 （volume fraction） are 6.46 and 2.71 cm/a,respectively. Though there is a transition layer with lots of holes or pores, a densified layer is formed on the surface of anode due tosome reactions producing aluminates. For the anode prepared in the atmosphere with oxygen content of 2×10^-3, the thickness of thedensification layer （about 50 μm） is thicker than that （about 30 μm） formed on the surface of anode prepared in the vacuum. Thecontents of NiO and Fe（II） in NiFe2xO4-y-z increase with the decrease of oxygen content in sintering atmosphere, which reduces thecorrosion resistance of the material.展开更多
A two-year study in a typical red soil region of Southern China was conductedto determine 1) the dry deposition velocity (V_d) for SO_2 and particulate SO_4^(2-) above abroadleaf forest, and 2) atmospheric sulfur flux...A two-year study in a typical red soil region of Southern China was conductedto determine 1) the dry deposition velocity (V_d) for SO_2 and particulate SO_4^(2-) above abroadleaf forest, and 2) atmospheric sulfur fluxes so as to estimate the contribution of variousfractions in the total. Using a resistance model based on continuous hourly meteorological data,atmospheric dry sulfur deposition in a forest was estimated according to V_d and concentrations ofboth atmospheric SO_2 and particulate SO_4^(2-). Meanwhile, wet S deposition was estimated based onrainfall and sulfate concentrations in the rainwater. Results showed that about 99% of the drysulfur deposition flux in the forest resulted from SO_2 dry deposition. In addition, the observeddry S deposition was greater in 2002 than in 2000 because of a higher average concentration of SO_2in 2002 than in 2000 and not because of the average dry deposition velocity which was lower for SO_2in 2002. Also, dry SO_2 deposition was the dominant fraction of deposited atmospheric sulfur inforests, contributing over 69% of the total annual sulfur deposition. Thus, dry SO_2 depositionshould be considered when estimating sulfur balance in forest ecological systems.展开更多
Ni Fe2O4 ceramics were prepared in different sintering atmospheres. The phase compositions, microstructures and mechanical properties were studied. The results show that the stoichiometric compound Ni Fe2O4 cannot be ...Ni Fe2O4 ceramics were prepared in different sintering atmospheres. The phase compositions, microstructures and mechanical properties were studied. The results show that the stoichiometric compound Ni Fe2O4 cannot be obtained in vacuum or atmospheres with oxygen contents of 2×10-5, 2×10-4 and 2×10-3, respectively. All the samples sintered in above-mentioned atmospheres contain phases of Ni Fe2O4 and Ni O. With increasing oxygen content, Ni Fe2O4 content in the ceramic increases, while Ni O content appears a contrary trend. In vacuum, Ni Fe2O4 ceramic has average grain size of 3.94 μm, and bending strength of85.12 MPa. The changes of the phase composition and mechanical properties of Ni Fe2O4 based cermets are mainly caused by the alteration of their properties of Ni Fe2O4 ceramic.展开更多
In this work, the surface modification of poly （1, 4-phenylene-cis-benzobisoxazole） （PBO） fibers by O 2 /Ar coaxial atmospheric dielectric barrier discharge was investigated, as well as the interfacial adhesion pr...In this work, the surface modification of poly （1, 4-phenylene-cis-benzobisoxazole） （PBO） fibers by O 2 /Ar coaxial atmospheric dielectric barrier discharge was investigated, as well as the interfacial adhesion properties of modified PBO fibers/epoxy composites. The results indicated that the contact angle decreased remarkably from 84.7 to 63.5 after 3 min O 2 /Ar plasma treatment. SEM and AFM images showed that the surface of the treated PBO fibers became rather rough. In addition, XPS results suggested that the polar functional group （O=C- O） was introduced on the surface of the treated PBO fiber. The interfacial adhesion test showed that the interfacial shear strength （IFSS） and the interlaminar shear strength （ILSS） increased significantly by 63.54% and 130%, respectively. Moreover, the excellent tensile property of the PBO fibres was well preserved.展开更多
文摘The atmospheric CH\-4 in Beijing is still increasing, even though its increasing rate has significantly decreased from 1.76%/a during 1985—1989 to 0.50%/a during 1990—1997. The seasonal variation of CH\-4 concentration showed a double\|peak pattern, one peak appearing in winter and the other in summer. It is evident that the annually seasonal variations of atmospheric CH\-4 in Beijing are different. From 1986 to 1997, the atmospheric CH\-4 increased by 185 ppbv, 37% and 21% of which were due to the increase in winter and in summer, respectively. After 1993, the annually seasonal increasing rate of CH\-4 concentration in summer (due to emission from biogenic sources) is negative while the increasing rate in winter (due to emission from non\|biogenic sources) is positive about 25 ppbv/a. As a result, the increase of CH\-4 emission from non\|biogenic sources in winter is the major reason that caused the annually seasonal increasing rate from 1993 to 1997. The biogenic sources in Beijing are shrinking while the non\|biogenic ones (such as fossil fuel combustion) are enlarging.
基金the National Key Research and Development Plan(Grant No.2018YFC1507105).
文摘The high observation efficiency,scanning speed and observation frequency of the Fengyun-4A(FY-4A)satellite indicates the progress of Chinese geostationary meteorological satellites.The characteristics of FY-4A atmospheric motion vectors(AMVs)derived from the high-level water vapor(WV-High)channel,mid-level water vapor(WV-Mid)channel,and infrared(IR)channel of FY-4A are analyzed,and their corresponding observation errors estimated.Then,the impacts of single-channel and multi-channel FY-4A AMVs on RMAPS-ST(the Rapid-refresh Multi-scale Analysis and Prediction System-Short Term)are evaluated based on one-month data assimilation cycling and forecasting experiments.Results show that the observation errors of FY-4A AMVs from the three channels have an explicit vertical structure.Results from the cycling experiments indicate that the assimilation of AMVs from WV-High produces more apparent improvement of the wind in the upper layer,while a more positive effect in the lower layer is achieved by the assimilation of AMVs from IR.Furthermore,the assimilation of AMVs from IR is more skillful for medium and moderate precipitation than from other channels owing to the good quality of data in the lower layer in the AMVs from IR.Assimilation of FY-4A AMVs from the three channels could combine the advantages of assimilation from each individual channel to improve the wind in the upper,middle and lower layers simultaneously.
文摘Influence of NH_4 Cl on the initial atmospheric corrosion of zinc was investigated viaquartz crystal microbalance (QCM) in laboratory at 80%RH and 25℃. The resultsshow that NH_4 Cl can accelerate the initial corrosion of zinc. Mass gain increase withthe exposure time, but mass gain in the later doesn't change obviously due to theformation of the insoluble simonkolleite on zinc surface in the presence of NH_4 Cl.Fourier transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD) wasused to characterize the corrosion products. Zn_5Cl_2(OH)_8·H_2O,(NH_4)_2ZnCl_4 andZnO are the corrosion products on zinc. Brief discussion on the mechanisms of at-mospheric corrosion of zinc in the presence of NH_4 Cl was introduced.
文摘Reactions between CH_4 and CO_2 under the action of continuous microwave discharge at atmospheric pressure were studied in a special homemade reactor. The main products were CO and H2, while acetylene and ethylene were also found in the products. Experimental results show that conversions of CH4 and CO2 could be higher than 90% without the presence of any catalyst. Effects of CO2/CH4 molar ratio and total flow rate of the feed gas on the reaction were also investigated.
基金supported by the National Basic Research Development Program of China (Grant no.2011CB952001)
文摘We analyze sea ice changes from eight different earth system models that have conducted experiment abrupt4xCO2 of the Coupled Model Intercomparison Project Phase 5 （CMIP5）. In response to abrupt quadrupling of CO2 from preindustrial levels, Arctic temperatures dramatically rise by about 10℃--16℃ in winter and the seasonal sea ice cycle and sea ice concentration are significantly changed compared with the pre-industrial control simulations （piControl）. Changes of Arctic sea ice concentration are spatially correlated with temperature patterns in all seasons and highest in autumn. Changes in sea ice are associated with changes in atmospheric circulation patterns at heights up to the jet stream. While the pattern of sea level pressure changes is generally similar to the surface air temperature change pattern, the wintertime 500 hPa circulation displays a positive Pacific North America （PNA） anomaly under abrupt4xCO2-piControl. This large scale teleconnection may contribute to, or feedback on, the simulated sea ice cover change and is associated with an intensification of the jet stream over East Asia and the north Pacific in winter.
基金National Natural Science Foundations of China (No.10835004,No.10775031)Science and Technology Commission of Shanghai Municipality,China (No.10XD1400100)
文摘Deposition of TiO2 film from atmospheric pressure non- equilibrium Ar/O2/TiCl4 plasma was done to study the effect of discharge power during the film deposition process in this paper. TiO2 films with kinds of morphologies and controlled crystallization were deposited from mixtures of TiCl4 and O2 on quartz substrate by one step process. Scanning electron microscope （SEM） and transmission electron microscope （TEM） were used to analyze the morphology and crystallization of the deposited TiO2 films. It was found that the discharge power played a key role in the morphology and crystallization of the deposited TiO2 film whether the flow of TiCl4was large or small. When the flow of TiCl4 was large, the deposited TiO2 film was amorphous particles at low discharge power and was multi-crystalline at high discharge power. When the flow of TiCl4 was small, the deposited TiO2 film became more compact and the crystallization was enhanced as the discharge power increased. The dependence of the discharge current and the applied voltage with the discharge power indicated that it was a glow discharge. The gas temperature which increases with the discharge power is one of the main causes that affect the morphology and crystallization of the deposited film.
基金Project(51474238)supported by the National Natural Science Foundation of China
文摘A comparative study on the corrosion resistance of 17Ni/（NiFe2O4-10NiO） cermet inert anode prepared in differentsintering atmospheres was conducted in Na3AlF6-Al2O3 melt. The results indicate that the corrosion rates of NiFe2O4-based cermetanodes prepared in the vacuum and the atmosphere with oxygen content of 2×10^-3 （volume fraction） are 6.46 and 2.71 cm/a,respectively. Though there is a transition layer with lots of holes or pores, a densified layer is formed on the surface of anode due tosome reactions producing aluminates. For the anode prepared in the atmosphere with oxygen content of 2×10^-3, the thickness of thedensification layer （about 50 μm） is thicker than that （about 30 μm） formed on the surface of anode prepared in the vacuum. Thecontents of NiO and Fe（II） in NiFe2xO4-y-z increase with the decrease of oxygen content in sintering atmosphere, which reduces thecorrosion resistance of the material.
基金Project supported by the National Key Basic Research Support Foundation (NKBRSF) of China (No. 1999011805)the Knowledge Innovation Program of Chinese Academy of Sciences (No.ISSASIP0205) the State Key Laboratory of Soil and Sustainable Agriculture, C
文摘A two-year study in a typical red soil region of Southern China was conductedto determine 1) the dry deposition velocity (V_d) for SO_2 and particulate SO_4^(2-) above abroadleaf forest, and 2) atmospheric sulfur fluxes so as to estimate the contribution of variousfractions in the total. Using a resistance model based on continuous hourly meteorological data,atmospheric dry sulfur deposition in a forest was estimated according to V_d and concentrations ofboth atmospheric SO_2 and particulate SO_4^(2-). Meanwhile, wet S deposition was estimated based onrainfall and sulfate concentrations in the rainwater. Results showed that about 99% of the drysulfur deposition flux in the forest resulted from SO_2 dry deposition. In addition, the observeddry S deposition was greater in 2002 than in 2000 because of a higher average concentration of SO_2in 2002 than in 2000 and not because of the average dry deposition velocity which was lower for SO_2in 2002. Also, dry SO_2 deposition was the dominant fraction of deposited atmospheric sulfur inforests, contributing over 69% of the total annual sulfur deposition. Thus, dry SO_2 depositionshould be considered when estimating sulfur balance in forest ecological systems.
基金Project(2008AA030503)supported by the National High Technology Research and Development Program of ChinaProject(51474238)supported by the National Natural Science Foundation of China
文摘Ni Fe2O4 ceramics were prepared in different sintering atmospheres. The phase compositions, microstructures and mechanical properties were studied. The results show that the stoichiometric compound Ni Fe2O4 cannot be obtained in vacuum or atmospheres with oxygen contents of 2×10-5, 2×10-4 and 2×10-3, respectively. All the samples sintered in above-mentioned atmospheres contain phases of Ni Fe2O4 and Ni O. With increasing oxygen content, Ni Fe2O4 content in the ceramic increases, while Ni O content appears a contrary trend. In vacuum, Ni Fe2O4 ceramic has average grain size of 3.94 μm, and bending strength of85.12 MPa. The changes of the phase composition and mechanical properties of Ni Fe2O4 based cermets are mainly caused by the alteration of their properties of Ni Fe2O4 ceramic.
基金supported by Shanghai Composite Company and partially by National Natural Science Foundation of China (No.10875146)
文摘In this work, the surface modification of poly （1, 4-phenylene-cis-benzobisoxazole） （PBO） fibers by O 2 /Ar coaxial atmospheric dielectric barrier discharge was investigated, as well as the interfacial adhesion properties of modified PBO fibers/epoxy composites. The results indicated that the contact angle decreased remarkably from 84.7 to 63.5 after 3 min O 2 /Ar plasma treatment. SEM and AFM images showed that the surface of the treated PBO fibers became rather rough. In addition, XPS results suggested that the polar functional group （O=C- O） was introduced on the surface of the treated PBO fiber. The interfacial adhesion test showed that the interfacial shear strength （IFSS） and the interlaminar shear strength （ILSS） increased significantly by 63.54% and 130%, respectively. Moreover, the excellent tensile property of the PBO fibres was well preserved.
