SYNTHESIS OF BLOCK COPOLYMER FROM 5,6 -BENZO-2-METHYLENE-1,3-DIOXEPANE AND METHYL ACRYLATE VIA ATOM TRANSFER RADICAL POLYMERIZATION

Poly(methyl acrylate)-b-poly(5,6-benzo-2-methylene-1,3-dioxepane) (PMA-b-PBMDO) was synthesized by two-step atom transfer radical polymerization (ATRP). Firstly, ATRP of methyl acrylate (MA) was realized using ethyl alpha-bromobutyrate (EBrB) as initiator in the presence of CuBr/2,2'-bipyridine. After isolation, poly(methyl acrylate) with terminal bromine (PMA-Br) was synthesized. Secondly, the resulting PMA-Br was used as a macromolecular initiator in the ATRP of BMDO. The structure of block copolymer was characterized by H-1-NMR spectroscopy. Molecular weight and molecular weight distribution were determined on a gel permeation chromatograph (GPC).

Synthesis of Dendritic-Linear Block Copolymers by Atom Transfer Radical Polymerization

The dendritic polyarylether 2-bromoisobutyrate as the macromolecular initiator for the controlled free radical polymerization of styrene was investigated. The polymerization was carried out with CuBr/2,2 ' -bipyridine catalyst at 110 degreesC. It is found that the hybrid dendritic-linear block copolymers possess well-defined molecular weights and low polydispersities.

SYNTHESIS OF BLOCK COPOLYMER BY INTEGRATED LIVING ANIONIC POLYMERIZATION-ATOM TRANSFER RADICAL POLYMERIZATION(ATRP)

Alpha-trichloroacetoxy terminated polystyrene oligomer (PS-CH2CH2OCOCCl3) and poly-(styrene-b-butadiene) oligomer [P(S-b-B)-CH2CH2OCOCCl3)] were synthesized by living anionic polymeri-zation using n-butyllithium as initiator. Then the PS-CH2CH2OCOCCl3 (PS-Cl-3) or P(S-b-B)-CH2CH2O-COCCl3 (PSB-Cl-3) was used as the macroinitiator in the polymerization of(meth)acrylates in the presence of CuX/bpy. AB diblock and ABC triblock copolymers were prepared by the integrated living anionic polymerization (LAP)-atom transfer radical polymerization (ATRP). The structures of the PSB-Cl-3 and the P(S-b-MMA) were identified by FTIR and H-1-NMR spectrum, respectively. A new way to design block copolymers (the combination of LAP and ATRP) was developed.

A NOVEL PHOTO-INITIATING SYSTEM FOR ATOM TRANSFER RADICAL POLYMERIZATION OF STYRENE

A novel photo-induced initiating system, 2,2-dimethoxy-2-phenylacetophenone (DMPA)/ferric tri(NN-diethyldithiocarbamate) [Fe(DC)(3)], was developed and used for the atom transfer radical polymerization (ATRP) of styrene in toluene. The polymerization proceeds with DMPA as photo-initiator, Fe(DC)(3) as catalyst and DC as a reversible transfer group, while the halogen and ligands are free. Well-defined PSt was prepared and the polymerization mechanism revealed by end group analysis belongs to a reverse ATRP. Block copolymer was prepared by using thus obtained PSt as macroinitiator and Fe(DC)(2) as catalyst under UV light irradiation via a conventional ATRP process.

SYNTHESIS OF POLY(METHYL METHACRYLATE)-graft-POLYSTYRENE BY ATOM TRANSFER RADICAL POLYMERIZATION

The radical copolymerization of methyl methacrylate and 2-hydroxyethyl methacrylate was carried out via atomtransfer radical polymerization (ATRP) initiated by ethyl 2-bromoisobutyrate and catalyzed by CuBr/2,2'-bipyridinecomplex. This polymerization proceeds in a living fashion with controlled molecular weight and low polydispersity. Theobtained copolymer was esterified with 2-bromoisobutylryl bromide yielding a macroinitiator, poly(methyl methacrylate-co-2-hydroxyethyl methacrylate-co-2-(2-bromoisobutyryloxy)ethyl methacrylate), and its structure was characterized by ~1H-NMR. This macroinitiator was used for ATRP of styrene to synthesize poly(methyl methacrylate)-graft-polystyrene. Themolecular weight of graft copolymer increased with the monomer conversion, and the polydispersity remained relatively low.The individual grafted polystyrene chains were cleaved from the macroinitiator backbone by hydrolysis and the hydrolyzed product was characterized by ~1H-NMR and GPC.

Synthesis of Well-Defined Dendritic-Linear Diblock and Triblock Copolymers by Controlled Free Radical Polymerization

The design and synthesis of novel dendritic-linear block copolymers were described. The copolymers were synthesized by atom transfer radical polymerization (ATRP) using dendritic polyarylether 2-bromoisobutyrate macroinitiator. ATRP carried out in bulk with CuBr/bipy catalyst at 120癈, yielded well-defined block copolymers with polydispersities less than 1.36.

Atom transfer radical polymerization and copolymerization of isoprene catalyzed by copper bromide/2,2＇-bipyridine

ATRP, as one of the most successful controlled/‘‘living＇＇ radical polymerization techniques, has been applied to a large variety of monomers including styrenes,（meth）acrylates,（meth）acrylamides,acrylonitrile, and vinyl acetate. However, ATRP of isoprene still remains a challenge due to poor solubility of copper catalysts in isoprene and low chain propagation rate constant of the monomer. In this work,Cu Br/2,2＇-bipyridine was found to effectively mediate ATRP of isoprene at 100 °C, 130 °C, and 150 °C with ethyl 2-bromopropionate as an initiator. The polymerizations proceeded smoothly and reached 48.1%,53.3%, and 71.0% conversions, respectively, in 72 h, producing polyisoprenes with molecular weights close to theoretical values and relatively narrow distributions. A block copolymer of polystyrene-bpolyisoprene was prepared using Cu Br/2,2＇＇-bipyridine as a catalyst and polystyrene as a macroinitiator.The-1H NMR and-（13）C NMR analysis of polyisoprene indicated that the polymer had 88.8% 1,4-addition structure and 63.9% of the polymer backbone units were in trans-configuration.

Synthesis and characterization of H-type amphiphilic liquid crystalline block copolymers by ATRP

H-type amphiphilic liquid crystalline block copolymers containing azobenzene were synthesized by atom transfer radical polymerization （ATRP）. Macroinitiators prepared by the esterification between poly（ethylene oxide） （PEG） and 2,2-dichloroacetyl chloride were utilized to initiate the polymerization of 6-[4-（4-ethoxyphenylazo）phenoxy]hexyl rnethacrylate （M6C）. The resulting macroinitiators and block copolymers were characterized by ^1H NMR, gel permeation chromatography （GPC）. Polarizing optical microscopy （POM） and differential scanning calorimetry （DSC） preliminarily revealed the liquid crystalline property of these block copolymers. This series of liquid crystalline block copolymers are promising in some areas, such as optical data storage, optical switch, and molecular devices.

Effect of spacer length on the liquid crystalline property of azobenzene-containing ABA-type triblock copolymers via ATRP

The effect of flexible spacer length on the liquid crystalline property of ABA-type triblock copolymers containing azobenzene groups was investigated. For the study, the monomers, n-[4-(4-ethoxyphenylazo)phenoxy]alkyl methacrylates with varying methylene groups (n = 0, 2, 6) were used to synthesize a series of azobenzene-containing amphiphilic triblock copolymers PAnC–PEG–PAnC by atom transfer radical polymerization (ATRP). Differential scanning calorimetry (DSC), polarizing optical microscopy (POM), and one-dimensional X-ray diffraction (1D WAXD) have shown that the glass transition temperatures of these copolymers decreased with increasing n, PA0C–PEG–PA0C has no mesophase, while both PA2C–PEG–PA2C and PA6C–PEG–PA6C have a nematic mesophase. These differences derive from the length of spacer groups between the polymer backbone and side-chain LC monomers.

Y-shaped block copolymers of poly(ethylene glycol) and poly(N-isopropylacrylamide) synthesized by ATRP

Novel Y-shaped block copolymers of poly（ethylene glycol） and poly（N-isopropylacrylamide）, PEG-b-（PNIPAM）2, were successfully synthesized through atom transfer radical polymerization （ATRP）. A difunctional macroinitiator was prepared by esterification of 2,2-dichloroacetyl chloride with poly（ethylene glycol） monomethyl ether （PEG）. The copolymers were obtained via the ATRP ofN-isopropylacrylamide （NIPAM） at 30℃ with CuCl/Me6TREN as a catalyst system and DMF/H2O （v/v = 3：1） mixture as solvent. The resulting copolymers were characterized by gel permeation chromatography （GPC） and ^1H NMR. These block copolymers show controllable molecular weights and narrow molecular weight distributions （PDI 〈 1.15）. Their phase transition temperatures and the corresponding enthalpy changes in aqueous solution were measured by differential scanning calorimetry （DSC）. As a result, the phase transition temperature of PEG45-b-（PNIPAM55）2 is higher than that of PNIPAM, however, the corresponding enthalpy change is much lower, indicating the significant influence of the macromolecular composition and architecture on the phase transition.

An Observation on the Microphase Separation of Poly(methyl methacrylate)-block-Polystyrene Copolymer

The phase behavior of a well-defined poly(methyl methacrylate)- b- polystyrene block copolymer was studied by transmission electron microscope. The results show that a microphase transition may have occurred in the copolymer film. A kind of lamellae and an ordered bicontinuous double-diamond morphology are observed clearly. The lamellar morphology reveals a larger period of about 400 nm.

Synthesis of α-Bromine-Terminated Polystyrene Macroinitiator and Its Initiation of MMA Polymerization by ATRP

In the present paper the synthesis of block copolymers via the transformation from living anionic polymerization (LAP) to atom transfer radical polymerization (ATRP) was described. α-Bromine-terminated polystyrenes(PStBr) in the LAP step was prepared by using n-BuLi as initiator, tetrahydrofuran (THF) as the activator, α-methylstyrene (α-MeSt) as the capping group and liquid bromine (Br_2) as the bromating agent. The effects of reaction conditions such as the amounts of α-MeSt, THF, and Br_2 as well as molecular weight of polystyrene on the bromating efficiency (BE) and coupling extent (CE) were examined. The present results show that the yield of PStBr obtained was more than 93. 8% and the coupling reaction was substantially absent. PStBr was further used as the macroinitiator in the polymerization of methyl-methacrylate (MMA) in the presence of copper (I ) halogen and 2, 2' -bipyridine (bpy) complexes. It was found that the molecular weight of the resulted PSt-b-PMMA increased linearly with the increase of the conversion of MMA and the polydispersity was 1. 2-1.6. The structures of PStBr and P(St-b-MMA) were characterized by ~1H NMR spectra.

Synthesis,Structure and Properties of a Novel Copolymer with Photochromic and Photoluminescence Functions

Photochromic and photoluminescence materials show bright colors under different excitation conditions,and thus,these functional materials have been applied in many fields.Based on the photochromic and photoluminescence theories,a block copolymer,which could be directly processed into nanofibers by electrospinning,was successfully prepared through atom transfer radical polymerization(ATRP).To synthesize the block copolymer,a vinyl monomer containing a spiropyran unit was employed to prepare the photochromic chain segment,and a polymethyl methacrylate(PMMA)chain segment was introduced to improve the processability of the block copolymer.Acting as the photoluminescence unit,the rare earth complex was linked to the side chain through coordination bonding between the rare earth ions and the ester groups of PMMA.When the photochromic and photoluminescence block copolymer was exposed to different wavelengths of ultraviolet(UV)light and visible(Vis)light,it could show white,red,green,yellow,and blue-purple.These results provide the potential of the as-prepared photochromic and photoluminescence block copolymer for application in fibers and fabrics.

SYNTHESIS OF AN AMPHIPHILIC PPESK-g-P(PEGMA)GRAFT COPOLYMER VIA ATRP AND ITS USE IN BLEND MODIFICATION OF PPESK MEMBRANES

Preparation of an amphiphilic graft copolymer having poly(phthalazinone ether sulfone ketone)(PPESK) as main chains was carried out by atom transfer radical polymerization(ATRP).The precursor,chloromethylated PPESK (CMPPESK),was prepared by using chioromethylether as chloromethylation agent.Then,poly(ethylene glycol) methyl ether methacrylate(PEGMA) was used as monomer to synthesize PPESK-g-P(PEGMA) by ATRP method under the catalysis of a cuprous chloride/2,2'-bipyridyl system.PPESK/PPESK-g-P(PEGMA) blend m...

窄分布两亲性嵌段共聚物的合成及其胶束化行为研究

利用原子转移自由基聚合合成了具有两亲性的嵌段聚合物聚苯乙烯 -b-聚丙烯酸 ( PS-b-PAA) ,用FTIR,1 H NMR,SEC对其进行了表征 ,并利用荧光探针技术研究了其在水溶液中的胶束化行为 .进一步的研究表明 。

ABA型两亲嵌段共聚物的合成及表征

以α ,α′ 二溴代二甲苯为引发剂 ,CuBr/2 ,2′ 联吡啶为催化体系 ,制备了双溴端基的分子量分布窄的聚苯乙烯 (MWD =1 18) .再以此作为大分子引发剂 ,实现了甲基丙烯酸对硝基苯酯的原子转移自由基聚合 ,制得了分子量可控且分子量分布窄的ABA型嵌段共聚物 ,再经水解、酸化 ,得到了聚甲基丙烯酸 b 聚苯乙烯 b

丙烯酸全氟烷基乙基酯嵌段共聚物的组成结构表征

The diblock copolymers of methyl acrylate and perfluoroalkyl ethyl acrylate(FAEA) were synthesized by atom transfer radical polymerization (ATRP).GPC, 1H-NMR and fluorine-elementary analysis (F-EA) were used to study the structure of the block copolymers.To combine GPC with NMR and to combine GPC with F-EA were used to calculate the block length.It was found interestingly that the results of 1H-NMR showed a “temperature-dependent" feature.It means the relative ratios of MA block to FAEA block calculated from NMR were changed with measuring temperature.It might be caused by the formation of molecular association.Temperature and solvents can affect the degree of association.Therefore, 1H-NMR and GPC can’t be used in quantitative analysis of the fluorinated diblock copolymer.To combine GPC with F-EA is suitable for the characterization of fluorinated diblock copolymers.

光学活性三嵌段刚柔共聚物的合成和在二氧六环/水中的自组装

An optically active rod coil rod triblock copolymer containing poly(ethylene oxide)(PEO) as the flexible segment and poly{(+) 2,5 bis[4′ ((s) 2 methyl butoxy) phenyl]styrene} (PMBPS) as the rigid segment,PMBPS b PEO b PMBPS,was synthesized via atom transfer radical polymerization.The PMBPS block had a stable helical conformation with an excess of screw sense in solution.The self assembly behavior of the triblock copolymer in dioxane/water mixed solvents was examined by means of TEM and turbidity measurements.The triblock copolymer molecules aggregated when water content in the system was about 2wt%. The higher the initial polymer concentrations,the lower the critical water content.They formed vesicles with highly dispersed outside diameters,but they had a relatively uniform wall thickness of (27±3) nm.

新型线状-树枝状两亲嵌段共聚物的合成

<正>结构规整的两亲嵌段共聚物的不寻常化学性质，已引起人们的广泛关注~[1,2]，树枝体（dendrimer）是一类架构密集、结构对称和具有多功能的新型特殊大分子。

两亲性聚乳酸嵌段共聚物的制备及性能研究

以端羟基聚乳酸和α-溴代丙酰溴为原料,制备了溴端基的聚乳酸;再以其为大分子引发剂,以溴化亚铜/2,2’-联吡啶为催化体系进行N-乙烯基吡咯烷酮的原子转移自由基聚合,制得了两亲性聚乳酸嵌段共聚物。用IR、GPC对聚合物进行了表征,用接触角测定仪测定了聚合物薄膜的水接触角,并考察了不同反应时间对共聚物的特性黏度和吸水率的影响。结果表明,该聚乳酸共聚物的亲水性较聚乳酸均聚物明显增大,TEM证实共聚物在水相中可形成一壳多核球状胶束,进一步佐证了该共聚物具有明显的两亲性。