Spatial sensitivity to absorption changes for various near-infrared spectroscopy methods:A compendium review

This compendium review focuses on the spatial distribution of sensitivity to localized absorption changes in optically diffuse media,particularly for measurements relevant to near-infrared spectroscopy.The three temporal domains,continuous wave,frequency domain,and time domain,each obtain different optical data types whose changes may be related to effective homogeneous changes in the absorption coefficient.Sensitivity is the relationship between a localized perturbation and the recovered effective homogeneous absorption change.Therefore,spatial sensitivity maps representing the perturbation location can be generated for the numerous optical data types in the three temporal domains.The review first presents a history of the past 30 years of work investigating this sensitivity in optically diffuse media.These works are experimental and theoretical,presenting one-,two-,and three-dimensional sensitivity maps for different Near-Infrared Spectroscopy methods,domains,and data types.Following this history,we present a compendium of sensitivity maps organized by temporal domain and then data type.This compendium provides a valuable tool to compare the spatial sensitivity of various measurement methods and parameters in one document.Methods for one to generate these maps are provided in Appendix A,including the code.This historical review and comprehensive sensitivity map compendium provides a single source researchers may use to visualize,investigate,compare,and generate sensitivity to localized absorption change maps.

Determination of Lead in Lime-preserved Egg by Microwave Digestion and Flame Atomic Absorption Spectroscopy

[Objectives] To establish a method for determining the lead content in lime-preserved eggs, to provide a theoretical basis for the quality control of production enterprises and the sampling and testing of supervision departments. [Methods] The lead content in lime-preserved eggs was measured by the microwave digestion and flame atomic absorption spectroscopy. [Results] The method had a correlation coefficient of r2=0.998 in the injection concentration range of 0-4 mg/L. The detection limit of the method was 0.008 2 mg/kg. In the range of 0.2 to 1.0 mg/kg addition concentration, the recovery rate of the method was 92.5%-108.0%, and the relative standard deviation(RSD) was <5%. [Conclusions] This method is accurate and reliable, simple and efficient, and is suitable for the detection of lead in lime-preserved eggs.

Determination of vanadium in food and traditional Chinese medicine by graphite furnace atomic absorption spectroscopy

Various experimental conditions were described for the vanadium determinationby graphite furnace atomic absorption spectroscopy (GFAAS). The experiments showed that whenatomization took place under the conditions where the combination of a pyrolytic coating graphitetube and fast raising temperature were used and the temperature was stable, the signal peak shapescould be improved, the sensitivity was enhanced, and the memory effect was removed. The vanadium infood and traditional Chinese medicinal herbs can be accurately determined using the standard curvemethod.

Investigation of the sodium storage mechanism of iron fluoride hydrate cathodes using X-ray absorption spectroscopy and mossbauer spectroscopy

Elucidation of a reaction mechanism is the most critical aspect for designing electrodes for highperformance secondary batteries.Herein,we investigate the sodium insertion/extraction into an iron fluoride hydrate(FeF_(3)·0.5H_(2)O)electrode for sodium-ion batteries(SIBs).The electrode material is prepared by employing an ionic liquid 1-butyl-3-methylimidazolium-tetrafluoroborate,which serves as a reaction medium and precursor for F^(-)ions.The crystal structure of FeF_(3)·0.5H_(2)O is observed as pyrochlore type with large open 3-D tunnels and a unit cell volume of 1129A^(3).The morphology of FeF_(3)·0.5H_(2)O is spherical shape with a mesoporous structure.The microstructure analysis reveals primary particle size of around 10 nm.The FeF_(3)·0.5H_(2)O cathode exhibits stable discharge capacities of 158,210,and 284 mA h g^(-1) in three different potential ranges of 1.5-4.5,1.2-4.5,and 1.0-4.5 V,respectively at 0.05 C rate.The specific capacities remained stable in over 50 cycles in all three potential ranges,while the rate capability was best in the potential range of 1.5-4.5 V.The electrochemical sodium storage mechanism is studied using X-ray absorption spectroscopy,indicating higher conversion at a more discharged state.Ex-situ M?ssbauer spectroscopy strengthens the results for reversible reduction/oxidation of Fe.These results will be favorable to establish high-performance cathode materials with selective voltage window for SIBs.

Energy Transfer Dynamics between Carbon Quantum Dots and Molybdenum Disulfide Revealed by Transient Absorption Spectroscopy

Zero-dimensional environmentally friendly carbon quantum dots(CQDs)combined with two-di-mensional materials have a wide range of applications in optoelec-tronic devices.We combined steady-state and transient absorp-tion spectroscopies to study the energy transfer dynamics between CQDs and molybdenum disulfide(MoS_(2)).Transient absorption plots showed photoinduced absorption and stimulated emission features,which involved the intrinsic and defect states of CQDs.Adding MoS_(2)to CQDs solution,the lowest unoccupied molecular orbital of CQDs transferred energy to MoS_(2),which quenched the intrinsic emission at 390 nm.With addition of MoS_(2),CQD-MoS_(2)composites quenched defect emission at 490 nm and upward absorption,which originated from another energy transfer from the defect state.Two energy transfer paths between CQDs and MoS_(2)were efficiently manipulated by changing the concentration of MoS_(2),which laid a foundation for improving device performance.

Use of Flame Atomic Absorption Spectroscopy and Multivariate Analysis for the Determination of Trace Elements in Human Scalp

The analysis of trace elements in human hair for use as biomarkers continues to generate considerable interest in environmental and bioanalytical studies, medical diagnostics, and forensic science. This study investigated the concentrations of essential and toxic elements (Fe, Mg, Ca, Cu, Zn, Cr, Cd, and Pb) using flame atomic absorption spectroscopy (FAAS) in human scalp hair obtained from subjects living in Forsyth County, North Carolina, USA. The influence of age, sex, race, and smoking habits on the levels of trace elements in the hair samples were also investigated. Additionally, analyses were subjected to a statistical, regression, and principal component analysis to evaluate inter-elemental association and possible pattern recognition in hair samples. Furthermore, Ca/Mg and Zn/Cu ratios, which are often used to evaluate the degree of Ca and Cu utilization in humans and as markers for various health related issues including, atherosclerosis, hypertension, insulin sensitivity, and pancreatic cancer, were calculated. The overall mean concentrations of Fe (25 μg/g), Ca (710 μg/g), Mg (120 μg/g), Zn (190 μg/g), Cu (12 μg/g), and Cr (0.20 μg/g) were found in hair samples. The trace element concentrations varied widely in hair samples as demonstrated by large range of concentrations obtained for each element. However, levels of Cd and Pb elements of <0.030 μg/g were detected in hair sample. In general, the levels of the trace elements in hair samples were poorly correlated. However, significant correlations were found between Ca and Mg (r = 0.840, p = 0.05). The levels of Fe, Ca, Mg, Zn, Cu, and Cr in hair samples and the calculated Ca/Mg and Zn/Cu ratios were found to be largely correlated with age, race, sex, and smoking habits.

In situ infrared, Raman and X-ray spectroscopy for the mechanistic understanding of hydrogen evolution reaction

Hydrogen production by water reduction reactions has received considerable attention because hydrogen is considered a clean-energy carrier,key for a sustainable energy future.Computational methods have been widely used to study the reaction mechanism of the hydrogen evolution reaction(HER),but the calculation results need to be supported by experimental results and direct evidence to confirm the mechanistic insights.In this review,we discuss the fundamental principles of the in situ spectroscopic strategy and a theoretical model for a mechanistic understanding of the HER.In addition,we investigate recent studies by in situ Fourier transform infrared(FTIR),Raman spectroscopy,and X-ray absorption spectroscopy(XAS) and cover new findings that occur at the catalyst-electrolyte interface during HER.These spectroscopic strategies provide practical ways to elucidate catalyst phase,reaction intermediate,catalyst-electrolyte interface,intermediate binding energy,metal valency state,and coordination environment during HER.

Core-level spectroscopy of the photodissociation process of BrCN molecule

Fewest-switches surfacing hopping(FSSH) simulations have been performed with the high-level multi-reference electronic structure method to explore the coupled electronic and nuclear dynamics upon photoexcitation of cyanogen bromide(BrCN). The potential energy surfaces(PES) of BrCN are charted as functions of the Jacobi coordinates(R, θ). An indepth examination of the FSSH trajectories reveals the temporal dynamics of the molecule and the population changes of the lowest twelve states during BrCN's photodissociation process, which presents a rich tapestry of dynamical information.Furthermore, the carbon K-edge x-ray absorption spectroscopy(XAS) is calculated with multi-reference inner-shell spectral simulations. The rotation of the CN fragment and the elongation of the C–Br bond are found to be the reason for the peak shifting in the XAS. Our findings offer a nuanced interpretation for inner-shell probe investigations of BrCN, setting the stage for a deeper understanding of the photodissociation process of cyanogen halides molecules.

Theoretical characterization of the adsorption configuration of pyrrole on Si(100)surface by x-ray spectroscopy

The possible configurations of pyrrole absorbed on a Si(100)surface have been investigated by x-ray photoelectron spectroscopy(XPS)and near-edge x-ray absorption fine structure(NEXAFS)spectra.The C-1s XPS and NEXAFS spectra of these adsorption configurations have been calculated by using the density functional theory(DFT)method and fullcore hole(FCH)approximation to investigate the relationship between the adsorption configurations and the spectra.The result shows that the XPS and NEXAFS spectra are structurally dependent on the configurations of pyrrole absorbed on the Si(100)surface.Compared with the XPS,the NEXAFS spectra are relatively sensitive to the adsorption configurations and can accurately identify them.The NEXAFS decomposition spectra produced by non-equivalent carbon atoms have also been calculated and show that the spectral features vary with the diverse types of carbon atoms and their structural environments.

Trace Elements Assessment in Human Nails in Eastern Sudan Using Atomic Absorption Spectroscopy

In the present work, elements concentration in fingernails samples of volunteers of different ages (males, females) were determined using atomic absorption spectroscopy (AAS) Perkin-Elmer, spectrophotometer. Fingernails samples of different groups were analyzed to determine the trace elements Ca, Mg, Mn, Fe, Ni, Cu, Co, Zn and Pb. Standards materials were prepared for concentration assessment that adjacent to samples from two cities in different location in eastern province of Sudan for elements concentrations finding. In addition, samples of hands fingernails and toenails were analyzed for comparison and method validation. Consequently, the significant levels of elements concentration in nails samples of Jabiat residents compared to Port Sudan resident’s area due to soil dispersion are supporting the possibility of external contamination. The data of component matrix and rotated component matrix of varimax normalization using principal component analysis revealed important predictors of nails elements Mg, Mn, Fe, Cu and Zn concentrations in soil of both areas under study. However, the Pb, Ni, Ca, and Co are possible to be indication of different sources associated with environmental contamination. The significant correlation and principal component analysis of the elements of nails concentrations in the two categories supported the probability of different expose environmental contamination.

Measurements of Absolute Atomic Nitrogen Density by Two-Photon Absorption Laser-Induced Fluorescence Spectroscopy in Hot Air Plasma Generated by Microwave Resonant Cavity

For the first time, absolute densities of atomic nitrogen in its ground state (N4S) have been measured in hot dry and humid air plasma columns under post-discharge regime. The determination of space-resolved absolute densities leads to obtain the dissociation degrees of molecular nitrogen in the plasma. The hot plasmas are generated inside an upstream gas-conditioning cell at 600 mbar when the air gas flow is directly injected at 10 slm in a microwave resonant cavity (2.45 GHz, 1 kW) placed in the downstream side. Density measurements based on laser induced fluorescence spectroscopy with two-photon excitation (TALIF), are more particularly performed along the radial and axial positions of the plasma column. Calibration of TALIF signals is performed in situ (i.e. in the same gas-conditioning cell but without plasma) using an air gas mixture containing krypton. Optical emission spectroscopy is considered to estimate the rotational gas temperature by adding a small amount of H2 in dry air to better detect OH (A-X) spectra. The rotational temperatures in humid air plasma column (50% of humidity) are larger than those of dry air plasma column by practically 30% near the nozzle of resonant cavity on the axis of the plasma column. This is partly due to attachment heating processes initiated by water vapor. A maximum of the measured absolute nitrogen density is also observed near the nozzle which is also larger for humid air plasma column. The obtained dissociation degrees of molecular nitrogen in both dry and humid air plasma along the air plasma column are lower than the cases where only thermodynamic equilibrium is assumed. This is characteristic of the absence of chemical and energetic equilibria not yet reached in the air plasma column dominated by recombination processes.

Determination of Chromium and Zinc in Soil by Microwave Digestion and Flame Atomic Absorption Spectrometry

[Objective] The aim was to develop a rapid, simple method for determination of chromium and zinc in soil samples by flame atomic absorption spectrometry.[Method] The method for determination of Cr and Zn in soil by combined flame atomic absorption spectrometry and microwave digestion was used. [Result] The concentration curve was linear within the range of 0-0.8 mg/L for Cr and 0-0.8 mg/L for Zn, the detection limits of Cr and Zn was 0.0025 mg/L and 0.002 3 mg/L, respectively. Recoveries of 102.4%-103.2% for Cr and 97.7%-98.3% for Zn were obtained for there soil samples. [Conclusion] The proposed method has the advantages of simple operation, high sensitivity, and high efficiency; it was successfully used for determination of Cr and Zn in soil samples.

The Use of Multiwalled Carbon Nanotubes Mini Column for Preconcentration of Trace Metal Ions in Tap Water of Khartoum City and Their Determination by Flame Atomic Absorption Spectrometry （FAAS）

The adsorption behavior of multiwalled carbon nanotubes （MWNTs） toward heavy elements has been investigated systemically, and a new method has been developed for the determination of trace elements in water samples based on preconcentration with mini-column packed with MWNTs prior to its determination by flame atomic absorption spectrometry （FAAS） The recommended parameters of proposed method influencing the preconcentration of the analytes, such as pH of the sample, sample flow rate and volume, elute solution and interfering ions, have been used. Under the optimized conditions, the calibration graphs were linear with the correlation coefficient range 0.9981-0.9995. According to the results, the metals were found 0.019-0.051, 0.011-0.031, 0.00-0.081, 0.00-0.0002, 0.007-0.0925, 0.00-0.0104 μg/L in water samples for Pb, Mn, Zn, Cd, Fe, Cu respectively. The percentage relative standard deviation （%RSD） for five replicate samples were 〈 5% in all cases. The method has been successfully applied to the determination of trace elements in some environmental samples with satisfactory results.

Determination of Five Metallic Elements in Guoshangye from Guizhou by Microwave Digestion-flame Atomic Absorption Spectrometry

In the study, the contents of 5 trace elements including Fe, Cu, Mg, Mn and Ca were directly analyzed by flame atomic absorption spectroscopy in Gu- oshangye. The sample was subjected to microwave digestion with HNO3 and H2O2, and detected by the standard curve method. The results showed that Guoshangye contained abundant trace elements which rates of these trace elements were in the curacy and satisfactory. were necessary for human. The recovery range of 96%-103%. The method is ac-

Rapid Determination of Cd in Squilla by Mixed Acid Leaching-flame Atomic Absorption Method

[Objective] This study was conducted to find a method for rapid determi-nation of Cd in squil a. [Method] Cd in squil a was determined by mixed acid leach-ing-flame atomic absorption method by digesting samples with HNO3-HSO4 （5：1） and determining Cd in the samples by a flame atomic absorption spectrophotometer. [Results] The Cd contents in squil a were 1.0-2.0 mg/kg, and the recoveries of Cd were 86%-109%, and the relative standard deviations were 0-6%. [Conclusion] The method is simple and rapid with strong operability, good reproducibility and high ac-curacy.

Determination of Trace Elements in Potatoes by Flame Atomic Absorption Spectrometry

[Objective] This study aimed to analyze the contents of trace elements in potatoes from different production areas in Qinghai Province. [Method] By flame atomic absorption spectrometry （FAAS）, the contents of various trace elements in potatoes were determined. [Result] Potatoes contain abundant trace elements such as Cu, Zn, Fe, Mn, Ca, K and Mg. To be specific, the contents of Ca, K and Mg were relatively high. [Conclusion] By using FAAS, the relative standard deviation was 1.17%-2.75% and the recovery rate was 97%-99.5%, indicating accurate and reli-able results with high precision.

Near-ultraviolet Incoherent Broadband Cavity Enhanced Absorption Spectroscopy for OCIO and CH20 in Cl-initiated Photooxidation Experiment

Chlorine dioxide （OC10） is an important indicator for Cl-activation. The monitoring of OC10 appears to be crucial for understanding the chemistry of Cl-initialed oxidation and its impact on air quality in polluted coastal regions and industrialized areas. We report the development of a Xe arc lamp based near-ultraviolet （335-375 nm） incoherent broad- band cavity enhanced absorption spectroscopy （IBBCEAS） spectrometer for quantitative assessment of OC10 in an atmospheric simulation chamber. The important intermediate compound CH20, and other key atmospheric trace species （NO2） were also simultaneously measured. The instrumental performance shows a strong potential of this kind of IBBCEAS instrument for field and laboratory studies of atmospheric halogen chemistry.

In Situ X-ray Absorption Spectroscopy Studies of Nanoscale Electrocatalysts

Nanoscale electrocatalysts have exhibited promising activity and stability,improving the kinetics of numerous electrochemical reactions in renewable energy systems such as electrolyzers,fuel cells,and metal-air batteries.Due to the size effect,nano particles with extreme small size have high surface areas,complicated morphology,and various surface terminations,which make them different from their bulk phases and often undergo restructuring during the reactions.These restructured materials are hard to probe by conventional ex-situ characterizations,thus leaving the true reaction centers and/or active sites difficult to determine.Nowadays,in situ techniques,particularly X-ray absorption spectroscopy(XAS),have become an important tool to obtain oxidation states,electronic structure,and local bonding environments,which are critical to investigate the electrocatalysts under real reaction conditions.In this review,we go over the basic principles of XAS and highlight recent applications of in situ XAS in studies of nanoscale electrocatalysts.

Use of Atomic Absorption Spectrometry in Assessment of Biomonitor Plants for Lead,Cadmium and Copper Pollution

Eleven plant species were collected from the vicinity of lead-battery plant in the city of Gaziantep,Turkey.Lead,cadmium and copper concentrations in the soil and leaves of plants were determined by atomic absorption spectrometry.Lead,Cd and Cu concentrations in the soil samples taken from battery area were found to be in the ranges of 304～602,0.4～0.44 and 31～37 mg·kg-1,respectively.Significantly increased lead concentration up to 2 750 mg·kg-1 was found in the leaves of Eleagnus angustifolia L.plant.The lead concentrations in the other plant leaves taken from 50 m around battery factory followed the order Ailanthus altissima>Morus sp.>Juglans regia L.>Ficus carica L.>Cydonia oblonga Miller>Prunus x domestica L.The plants,Populus nigra L.,Eleagnus angustifolia L.and Salix sp.were found useful for Cd,and the plant,Eleagnus angustifolia L.for Pb,to be considered as potential biomonitor.Especially,leaves of trees and plants taken from the distance of 50 m from battery plant have relatively higher Pb concentrations.Therefore,people who and animals which live in this area and benefit from these soil and plants have vital risks.

Determination of Ultratrace Amounts of Copper(Ⅱ) in Water Samples by Electrothermal Atomic Absorption Spectrometry After Cloud Point Extraction

A novel approach was developed for the determination of ultratrace amounts of copper in water samples by using electrothermal atomic absorption spectrometry （ETAAS） after cloud point extraction （ CPE ）. 1-（ 2-Pyridylazo ） -2- naphthol was used as the chelating reagent and Triton X-114 as the mieellar-forming surfactant. CPE was conducted in a pH 8. 0 medium at 40 ℃ for 10 rain. After the separation of the phases by contrifugafion, the surfactant-rieh phase was diluted with 1 mL of a methanol solution of 0. 1 mol/L HNO3. Then 20μL of the diluted surfactant-rieh phase was injected into the graphite furnace for atomization in the absence of any matrix modifier. Various experimental conditions that affect the extraction and atomization processes were optimized. A detection limit of 5 ng/L was obtained after preconeentration. The linear dynamic range of the copper mass concentration was found to be 0-2.0 ng/mL, and the relative standard deviation was found to be less than 3. 1% for a sample containing 1.0 ng/mL Cu （ Ⅱ ）. This developed method was successfully applied to the determination of uhratraee amounts of Cu in drinking water, tap water, and seawater samples.