A risk assessment method considering risk attributes and work safety informational needs and its application

The technological revolution has spawned a new generation of industrial systems,but it has also put forward higher requirements for safety management accuracy,timeliness,and systematicness.Risk assessment needs to evolve to address the existing and future challenges by considering the new demands and advancements in safety management.The study aims to propose a systematic and comprehensive risk assessment method to meet the needs of process system safety management.The methodology first incorporates possibility,severity,and dynamicity(PSD)to structure the“51X”evaluation indicator system,including the inherent,management,and disturbance risk factors.Subsequently,the four-tier(risk point-unit-enterprise-region)risk assessment(RA)mathematical model has been established to consider supervision needs.And in conclusion,the application of the PSD-RA method in ammonia refrigeration workshop cases and safety risk monitoring systems is presented to illustrate the feasibility and effectiveness of the proposed PSD-RA method in safety management.The findings show that the PSD-RA method can be well integrated with the needs of safety work informatization,which is also helpful for implementing the enterprise's safety work responsibility and the government's safety supervision responsibility.

Modelling of Active and Latent Attributes Based on Traveler Perspectives: Case of Port City of Douala

A growing stream of study stresses the relevance of subjective elements in understanding the hierarchy of preferences that underpin individual travel behavior. The purpose of this study is to evaluate the impact of various factors on mode choice. To achieve this, a multinomial logit model (MNL) was used to analyze the relationships between mode choice and three classes of attributes;Combined Active and Latent, Active only and Latent only attributes. The data used are derived from surveys in the port city of Douala, Cameroon as a case study. Results stipulated that, the combined attributes model performed better than both active only attributes and latent only attributes models. Likewise, latent only attributes model performed better than active only attributes model. The advantage of modelling all three groups is for better selection of the most relevant attributes, and this is very relevant in understanding travel behavior of individuals and mode choice decisions.

A New Growth Model of Fault Attributes in a Strike-Slip Fault System in the Tarim Basin

Fault attributes generally display a consistent power–law-scaling relationship.Based on new 3 D seismic data,however,we found some exceptional fault attribute relationships of lengths(L)–throw(T)(vertical component of displacement),overlap zone length(Lo)–width(Wo)from a strike-slip fault system of the Ordovician carbonates in the Tarim Basin.The L–T relationship shows two linear segments with breakup at^40 km in fault length.This presents an exceptional throw increase in the second stage,which is attributed to a localization of vertical displacement and deformation in overlapping zones other than the different fault scales in a mature fault zone.The Lo–Wo relationship in the overlapping zones shows multiply stepped-shape patterns,suggesting multiple fault differential growth and periodic increase in fault size.Therefore,we propose a new alternative growth model of fault attributes in strike-slip fault zones,in which the overlapping zones accumulated localized displacement and deformation in the intracratonic strike-slip fault zone.

Hierarchy-Based Team Software Process Simulation Model

According to the characteristic of Team Software Process （TSP）, it adopts a hierarchy-based model combined discrete event model with system dynamics model. This model represents TSP as form of two levels, the inner level embodies the continuity of the software process, the outer embodies the software development process by phases, and the structure and principle of the model is explained in detail, then formalization description of the model is offered. At last, an example is presented to demonstrate the simulation process and result. This model can simulate team software process from various angles, supervise and predict the software process. Also it can make the management of software development become more scientific and improve the quality of software.

Comprehensive Assessment of Seawater Quality Based on an Improved Attribute Recognition Model

The attribute recognition model (ARM) has been widely used to make comprehensive assessment in many engineering fields, such as environment, ecology, and economy. However, large numbers of experiments indicate that the value of weight vector has no relativity to its initial value but depends on the data of Quality Standard and actual samples. In the present study, the ARM is enhanced with the technique of data driving, which means some more groups of data from the Quality Standard are selected with the uniform random method to make the calculation of weight values more rational and more scientific. This improved attribute recognition model (IARM) is applied to a real case of assessment on seawater quality. The given example shows that the IARM has the merits of being simple in principle, easy to operate, and capable of producing objective results, and is therefore of use in evaluation problems in marine environment science.

An attribute recognition model based on entropy weight for evaluating the quality of groundwater sources

In our study, entropy weight coefficients, based on Shannon entropy, were determined for an attribute recognition model to model the quality of groundwater sources. The model follows the theory previously proposed by Chen Q S. In the model, firstly, the author establishes the attribute space matrix and determines the weight based on Shannon entropy theory; secondly, calculates attribute measure; thirdly, evaluates that with confidence criterion and score criterion; finally, an application example is given. The results show that the water quality of the groundwater sources for the city comes up to the grade II or III standard. There is no pollution that obviously exceeds the standard and the water can meet people’s needs .The results from an evaluation of this model are in basic agreement with the observed situation and with a set pair analysis (SPA) model.

DEVELOPMENT OF A GIS DATA MODEL WITH SPATIAL,TEMPORAL AND ATTRIBUTE COMPONENTS BASED ON OBJECT-ORIENTED APPROACH

This paper presents a conceptual data model, the STA-model, for handling spatial, temporal and attribute aspects of objects in GIS. The model is developed on the basis of object-oriented modeling approach. This model includes two major parts: (a) modeling the signal objects by STA-object elements, and (b) modeling relationships between STA-objects. As an example, the STA-model is applied for modeling land cover change data with spatial, temporal and attribute components.

Attribute-Based Re-Encryption Scheme in the Standard Model

In this paper, we propose a new attribute-based proxy re-encryption scheme, where a semi-trusted proxy, with some additional information, can transform a ciphertext under a set of attributes into a new ciphertext under another set of attributes on the same message, but not vice versa, furthermore, its security was proved in the standard model based on decisional bilinear Diffie-Hellman assumption. This scheme can be used to realize fine-grained selectively sharing of encrypted data, but the general proxy rencryption scheme severely can not do it, so the proposed schemecan be thought as an improvement of general traditional proxy re-encryption scheme.

The Sensitivity of Model Results to Specification of Network-Based Level of Service Attributes: An Application of a Mixed Logit Model to Trave Mode Choice

The need for travel demand models is growing worldwide. Obtaining reasonably accurate level of service (LOS) attributes of different travel modes such as travel time and cost representing the performance of transportation system is not a trivial task, especially in growing cities of developing countries. This study investigates the sensitivity of results of a travel mode choice model to different specifications of network-based LOS attributes using a mixed logit model. The study also looks at the possibilities of correcting some of the inaccuracies in network-based LOS attributes. Further, the study also explores the effects of different specifications of LOS data on implied values of time and aggregation forecasting. The findings indicate that the implied values of time are very sensitive to specification of data and model implying that utmost care must be taken if the purpose of the model is to estimate values of time. Models estimated on all specifications of LOS-data perform well in prediction, likely suggesting that the extra expense on developing a more detailed and accurate network models so as to derive more precise LOS attributes is unnecessary for impact analyses of some policies.

Forward modeling of fracture prediction based on seismic attribute modeling

Fractured reservoirs have always been a big favorable area for oil and gas reservoirs,so prediction of fractures is also a research hotspot in recent years.Due to the diversity of fracture development and the unclear development mechanism,fracture prediction has always been a major problem.Simple numerical simulation In this paper,seismic attribute is combined with numerical simulation,logging data and actual seismic profile are used as constraints,inversion impedance value and coherent attribute are combined,and finally a property model more in line with the actual geological conditions is established.The wave equation calculation and migration processing were used to obtain the numerical simulation profile,and the actual seismic profile,fracture detection profile and numerical simulation profile were combined for analysis:①The numerical simulation section under this modeling method can greatly correspond to the actual seismic section,and the reflected results can better reflect the changes of response characteristics.②The reliability and applicability of the fracture detection technology can be determined by comparing the forward simulation profile with the fracture detection profile.

Time-domain compressive dictionary of attributed scattering center model for sparse representation

Parameter estimation of the attributed scattering center(ASC) model is significant for automatic target recognition(ATR). Sparse representation based parameter estimation methods have developed rapidly. Construction of the separable dictionary is a key issue for sparse representation technology. A compressive time-domain dictionary(TD) for ASC model is presented. Two-dimensional frequency domain responses of the ASC are produced and transformed into the time domain. Then these time domain responses are cutoff and stacked into vectors. These vectored time-domain responses are amalgamated to form the TD. Compared with the traditional frequency-domain dictionary(FD), the TD is a matrix that is quite spare and can markedly reduce the data size of the dictionary. Based on the basic TD construction method, we present four extended TD construction methods, which are available for different applications. In the experiments, the performance of the TD, including the basic model and the extended models, has been firstly analyzed in comparison with the FD. Secondly, an example of parameter estimation from SAR synthetic aperture radar(SAR) measurements of a target collected in an anechoic room is exhibited. Finally, a sparse image reconstruction example is from two apart apertures. Experimental results demonstrate the effectiveness and efficiency of the proposed TD.

Multiple-Attribute and Multilevel Synthetic Evaluation Model and Its Application

On the basis of analyzing the flaws of present multiple-attribute and multilevel evaluation methods, concerning the problem of characteristics of the multiple-attribute and multilevel system s appraisal and the particular emphasis on the respective attributes in the evaluation process, as well as its relevance to the environment, an optimal attribute system is proposed, and the multiplicative analytic hierarchy process (MAHP) is used to obtain subjective weight coefficients and the objective weight coefficient evaluating method is given. The deviation between the index value of each level and the values of the same index of other levels are formulated, and an optimal model is gained, thus establishing the weight coefficients of the whole optimal attribute system. Furthermore, the detailed implementation procedure of this method is introduced. Besides, favorable results have been gained by applying the model to the practical problems of economic evaluation.

Synthetic aperture radar imaging based on attributed scatter model using sparse recovery techniques

The sparse recovery algorithms formulate synthetic aperture radar(SAR) imaging problem in terms of sparse representation(SR) of a small number of strong scatters' positions among a much large number of potential scatters' positions,and provide an effective approach to improve the SAR image resolution.Based on the attributed scatter center model,several experiments were performed with different practical considerations to evaluate the performance of five representative SR techniques,namely,sparse Bayesian learning(SBL),fast Bayesian matching pursuit(FBMP),smoothed l0 norm method(SL0),sparse reconstruction by separable approximation(SpaRSA),fast iterative shrinkage-thresholding algorithm(FISTA),and the parameter settings in five SR algorithms were discussed.In different situations,the performances of these algorithms were also discussed.Through the comparison of MSE and failure rate in each algorithm simulation,FBMP and SpaRSA are found suitable for dealing with problems in the SAR imaging based on attributed scattering center model.Although the SBL is time-consuming,it always get better performance when related to failure rate and high SNR.

New approach to multiple attribute decision making with interval numbers

In an ambiguous decision domain, the evaluation values of alternatives against attributes would be interval numbers because of the inherent, uncertain property of the problems. By using a number of linear programming models, Bryson and Mobolurin propose an approach to compute attribute weights and overall values of the alternatives in the form of interval numbers. The intervals of the overall values of alternatives are then transformed into points or crisp values for comparisons among the alternatives. However, the attribute weights are different because of the use of linear programming models in Bryson and Mobolurin＇s approach. Thus, the alternatives are not comparable because different attribute weights are employed to calculate the overall values of the alternatives. A new approach is proposed to overcome the drawbacks of Bryson and Mobolurin＇s approach. By transforming the decision matrix with intervals into the one with crisp values, a new linear programming model is proposed, to calculate the attribute weights for conducting alternative ranking.

Attributing Analysis on the Model Bias in Surface Temperature in the Climate System Model FGOALS-s2 through a Process-Based Decomposition Method

This study uses the coupled atmosphere–surface climate feedback–response analysis method（CFRAM） to analyze the surface temperature biases in the Flexible Global Ocean–Atmosphere–Land System model, spectral version 2（FGOALS-s2）in January and July. The process-based decomposition of the surface temperature biases, defined as the difference between the model and ERA-Interim during 1979–2005, enables us to attribute the model surface temperature biases to individual radiative processes including ozone, water vapor, cloud, and surface albedo; and non-radiative processes including surface sensible and latent heat fluxes, and dynamic processes at the surface and in the atmosphere. The results show that significant model surface temperature biases are almost globally present, are generally larger over land than over oceans, and are relatively larger in summer than in winter. Relative to the model biases in non-radiative processes, which tend to dominate the surface temperature biases in most parts of the world, biases in radiative processes are much smaller, except in the sub-polar Antarctic region where the cold biases from the much overestimated surface albedo are compensated for by the warm biases from nonradiative processes. The larger biases in non-radiative processes mainly lie in surface heat fluxes and in surface dynamics,which are twice as large in the Southern Hemisphere as in the Northern Hemisphere and always tend to compensate for each other. In particular, the upward/downward heat fluxes are systematically underestimated/overestimated in most parts of the world, and are mainly compensated for by surface dynamic processes including the increased heat storage in deep oceans across the globe.

Method for multiple attribute decision making based on incomplete linguistic judgment matrix

With respect to the multiple attribute decision making problems with linguistic preference relations on alternatives in the form of incomplete linguistic judgment matrix, a method is proposed to analyze the decision problem. The incomplete linguistic judgment matrix is transformed into incomplete fuzzy judgment matrix and an optimization model is developed on the basis of incomplete fuzzy judgment matrix provided by the decision maker and the decision matrix to determine attribute weights by Lagrange multiplier method. Then the overall values of all alternatives are calculated to rank them. A numerical example is given to illustrate the feasibility and practicality of the proposed method.

Relationships between Soil Depth and Terrain Attributes in a Semi Arid Hilly Region in Western Iran

Soil depth generally varies in mountainous regions in rather complex ways.Conventional soil survey methods for evaluating the soil depth in mountainous and hilly regions require a lot of time,effort and consequently relatively large budget to perform.This study was conducted to explore the relationships between soil depth and topographic attributes in a hilly region in western Iran.For this,one hundred sampling points were selected using randomly stratified methodology,and considering all geomorphic surfaces including summit,shoulder,backslope,footslope and toeslope;and soil depth was actually measured.Eleven primary and secondary topographic attributes were derived from the digital elevation model(DEM) at the study area.The result of multiple linear regression indicated that slope,wetness index,catchment area and sediment transport index,which were included in the model,could explain about 76 % of total variability in soil depth at the selected site.This proposed approach may be applicable to other hilly regions in the semi-arid areas at a larger scale.

Integrating the geology, seismic attributes, and production of reservoirs to adjust interwell areas: A case from the Mangyshlak Basin of West Kazakhstan

Dynamic models of the seismic,geological,and flow characteristics of a reservoir are the main tool used to evaluate the potential of drilling new infill wells.Static geological models are mainly based on borehole data combined with dynamic analyses of production dynamics.They are used to determine the redevelopment of and adjustments to new drilling locations;however,such models rarely incorporate seismic data.Consequently,it is difficult to control the changes in geological models between wells,which results in the configuration of well positions and predicted results being less than ideal.To improve the development of adjusted areas in terms of their remaining oil contents,we developed a new integrated analysis that combines static sediment modelling,including microfacies analysis(among other reservoir and seismic properties),with production behaviours.Here,we illustrate this new process by(1)establishing favourable areas for static geological analysis;(2)studying well recompletion potential and the condition of non-producing wells;(3)conducting interwell analyses with seismic and sedimentary data;(4)identifying potential sites constrained by seismic and geological studies,as well as initial oilfield production;(5)providing suggestions in a new well development plan.

Software Coupling and Cohesion Model for Measuring the Quality of Software Components

Measuring software quality requires software engineers to understand the system’s quality attributes and their measurements.The quality attribute is a qualitative property;however,the quantitative feature is needed for software measurement,which is not considered during the development of most software systems.Many research studies have investigated different approaches for measuring software quality,but with no practical approaches to quantify and measure quality attributes.This paper proposes a software quality measurement model,based on a software interconnection model,to measure the quality of software components and the overall quality of the software system.Unlike most of the existing approaches,the proposed approach can be applied at the early stages of software development,to different architectural design models,and at different levels of system decomposition.This article introduces a software measurement model that uses a heuristic normalization of the software’s internal quality attributes,i.e.,coupling and cohesion,for software quality measurement.In this model,the quality of a software component is measured based on its internal strength and the coupling it exhibits with other component(s).The proposed model has been experimented with nine software engineering teams that have agreed to participate in the experiment during the development of their different software systems.The experiments have shown that coupling reduces the internal strength of the coupled components by the amount of coupling they exhibit,which degrades their quality and the overall quality of the software system.The introduced model can help in understanding the quality of software design.In addition,it identifies the locations in software design that exhibit unnecessary couplings that degrade the quality of the software systems,which can be eliminated.

Development Model and Quantitative Prediction of Igneous Rock in S Oilfield, the Bohai Sea Area

The structure of S Oilfield of Bohai sea area in China is located in the low uplift slope zone of the Dongwa Laibei area in the Huanghekou depression. The target interval of the oilfield belongs to the Paleogene layered structural oil reservoir under the influence of igneous rocks. Due to the widespread development of igneous rocks, and the diversity of igneous rock types, the structure is complex, and the lateral changes are intense. The differences in volcanic eruption intensity and volcanic materials made the igneous rock masses overlap each other, with rapid changes in lithofacies, and complex seismic reflection structures. Therefore, it was difficult to carry out fine characterization of igneous rocks. Based on the lithofacies model, lithofacies combination types, and seismic response characteristics of volcanic mechanisms, this paper summarized three types of development models of volcanic mechanisms in the study area. At the same time, through technical means such as stratigraphic slicing, seismic attribute extraction, and attribute optimization analysis, the spatial distribution characteristics of various facies zones of igneous rocks at different stages were described in detail, achieving precise prediction of igneous rocks in Bozhong S Oilfield. During the development process of the oilfield, the technical research results guided the optimization of well locations and provided technical support for the efficient development of the oilfield.