Understandings of the effect of hot deformation parameters close to the practical production line on grain refinement are crucial for enhancing both the strength and toughness of future rail steels.In this work,the au...Understandings of the effect of hot deformation parameters close to the practical production line on grain refinement are crucial for enhancing both the strength and toughness of future rail steels.In this work,the austenite dynamic recrystallization(DRX)behaviors of a eutectoid pearlite rail steel were studied using a thermo-mechanical simulator with hot deformation parameters frequently employed in rail production lines.The single-pass hot deformation results reveal that the prior austenite grain sizes(PAGSs)for samples with different deformation reductions decrease initially with an increase in deformation temperature.However,once the deformation temperature is beyond a certain threshold,the PAGSs start to increase.It can be attributed to the rise in DRX volume fraction and the increase of DRX grain with deformation temperature,respectively.Three-pass hot deformation results show that the accumulated strain generated in the first and second deformation passes can increase the extent of DRX.In the case of complete DRX,PAGS is predominantly determined by the deformation temperature of the final pass.It suggests a strategic approach during industrial production where part of the deformation reduction in low temperature range can be shifted to the medium temperature range to release rolling mill loads.展开更多
First,strip cast samples of high strength microalloyed steel with sub-rapid solidification characteristics were prepared by simulated strip casting technique.Next,the isothermal growth of austenite grain during the re...First,strip cast samples of high strength microalloyed steel with sub-rapid solidification characteristics were prepared by simulated strip casting technique.Next,the isothermal growth of austenite grain during the reheating treatment of strip casts was observed in situ through confocal laser scanning microscope(CLSM).The results indicated that the time exponent of grains growth suddenly rise when the isothermal temperature higher than 1000℃.And the activation energy for austenite grain growth were calculated to be 538.0 kJ/mol in the high temperature region(above 1000℃)and 693.2 kJ/mol in the low temperature region(below 1000℃),respectively.Then,the kinetics model of austenite isothermal growth was established,which can predict the austenite grain size during isothermal hold very well.Besides,high density of second phase particles with small size was found during the isothermal hold at the low temperature region,leading to the refinement of austenite grain.After isothermal hold at different temperature for 1800 s,the bainite transformation in microalloyed steel strip was also observed in situ during the continuous cooling process.And growth rates of bainite plates with different nucleation positions and different prior austenite grain size(PAGS)were calculated.It was indicated that the growth rate of the bainite plate is not only related to the nucleation position but also to the PAGS.展开更多
针对半双工译码转发中继信道,提出了一种可逼近三节点中继信道容量限的空间耦合RA码的设计方法。针对二进制删除信道,源节点分别向中继节点和目的节点发送空间耦合RA码,中继节点先正确恢复出源节点发送的空间耦合RA,然后再次编码产生额...针对半双工译码转发中继信道,提出了一种可逼近三节点中继信道容量限的空间耦合RA码的设计方法。针对二进制删除信道,源节点分别向中继节点和目的节点发送空间耦合RA码,中继节点先正确恢复出源节点发送的空间耦合RA,然后再次编码产生额外的校验比特并转发给目的节点;目的节点结合中继节点发送的额外校验比特和源节点发送的空间耦合RA码进行译码,正确恢复出源节点的信息。为了评估所设计的空间耦合RA码在三节点中继信道下的渐近性能,推导了密度进化算法用于计算阈值。阈值分析结果表明,所提出的空间耦合RA码能够同时逼近源到中继链路和源到目的链路的容量限。同时,基于半双工二进制删除中继信道,仿真了所设计的空间耦合RA码的误码性能,结果表明,其误码性能与所推导的密度进化算法计算的阈值结果一致,呈现出逼近于容量限的优异性能,且优于采用空间耦合低密度奇偶校验(Low Density Parity Check,LDPC)码的性能。展开更多
The synergistic damage effect of irradiation and corrosion of reactor structural materials has been a prominent research focus.This paper provides a comprehensive review of the synergistic effects on the third-and fou...The synergistic damage effect of irradiation and corrosion of reactor structural materials has been a prominent research focus.This paper provides a comprehensive review of the synergistic effects on the third-and fourth-generation fission nuclear energy structural materials used in pressurized water reactors and molten salt reactors.The competitive mechanisms of multiple influencing factors,such as the irradiation dose,corrosion type,and environmental temperature,are summarized in this paper.Conceptual approaches are proposed to alleviate the synergistic damage caused by irradiation and corrosion,thereby promoting in-depth research in the future and solving this key challenge for the structural materials used in reactors.展开更多
The BG110E high-strength expansion pipe was developed using medium manganese steel and subjected to a two-phase zone heat treatment process.Mechanical properties and microstructure analysis results have proven that th...The BG110E high-strength expansion pipe was developed using medium manganese steel and subjected to a two-phase zone heat treatment process.Mechanical properties and microstructure analysis results have proven that the BG110E expansion pipe exhibits uniform elongation of more than 19%.Moreover,after undergoing expan-sion deformation,its strength,toughness,and plasticity are found to meet the stringent requirements of the P110 pipe.The microstructure of this high-strength expansion pipe,which has a strength of 110 ksi(1 ksi=6.895 MPa),consists of tempered martensite,ferrite,retained austenite,and granular bainite.The propotion of retained austenite reaches up to 12%,ensuring high plasticity and the occurrence of the transformation-induced plasticity effect during the deformation process.Consequently,it enhances the coordinated deformation ability between different phases,which significantly improves the internal yield pressure of the BG110E high-strength expansion pipe in turn.展开更多
All tissues in the body are subjected externally to gravity and internally by collagenfibril and cellular retractive forces that create stress and energy equilibrium required for homeostasis.Mechanotransduction involve...All tissues in the body are subjected externally to gravity and internally by collagenfibril and cellular retractive forces that create stress and energy equilibrium required for homeostasis.Mechanotransduction involves mechanical work(force through a distance)and energy storage as kinetic and potential energy.This leads to changes in cell mitosis or apoptosis and the synthesis or loss of tissue components.It involves the application of energy directly to cells through integrin-mediated processes,cell-cell connections,stretching of the cell cytoplasm,and activation of the cell nucleus via yes-associated protein(YAP)and transcriptional coactivator with PDZ-motif(TAZ).These processes involve numerous complexes,intermediate molecules,and multiple pathways.Several pathways have been identified from research studies on vertebrate cell culture and from studies in invertebrates.These pathways involve mechanosensors and other molecules that activate the pathways.This review discusses the mitogen-activated protein kinase(MAPK)family,Hippo,Hedgehog,and Wingless-related integration site(WNT)/βcatenin signaling pathways.The mediators covered includeβcatenin,ion channels,growth factors,hormone receptors,members of the Ras superfamily,and components of the linker of nucleoskeleton and cytoskeleton(LINC)complex.However,the interrelationship among the different pathways remains to be clarified.Integrin-mediated mechanotransduction involves direct tensile loading and energy applied to the cell membrane via collagenfibril stretching.This energy is transferred between cells by stretching the cell-cell connections involving cadherins and the WNT/βcatenin pathway.These alterations induce changes in intracellular events in the cytoskeleton and nuclear skeleton caused by the release of YAP and TAZ.These coactivators then penetrate through the nuclear pores and influence nuclear cell function.Alteration in the balance of forces and energy applied to cells and tissues is hypothesized to shift the cell-extracellular matrix mechanical equilibrium by modifying mechanotransduction.The shift in equilibrium can lead to either tissue synthesis,genetic modifications,or promotefibrotic diseases,including epithelial cell-derived cancers,depending on the local metabolic conditions.展开更多
基金financially supported by the National Natural Science Foundation of China(Nos.52293395 and 52293393)the Xiongan Science and Technology Innovation Talent Project of MOST,China(No.2022XACX0500)。
文摘Understandings of the effect of hot deformation parameters close to the practical production line on grain refinement are crucial for enhancing both the strength and toughness of future rail steels.In this work,the austenite dynamic recrystallization(DRX)behaviors of a eutectoid pearlite rail steel were studied using a thermo-mechanical simulator with hot deformation parameters frequently employed in rail production lines.The single-pass hot deformation results reveal that the prior austenite grain sizes(PAGSs)for samples with different deformation reductions decrease initially with an increase in deformation temperature.However,once the deformation temperature is beyond a certain threshold,the PAGSs start to increase.It can be attributed to the rise in DRX volume fraction and the increase of DRX grain with deformation temperature,respectively.Three-pass hot deformation results show that the accumulated strain generated in the first and second deformation passes can increase the extent of DRX.In the case of complete DRX,PAGS is predominantly determined by the deformation temperature of the final pass.It suggests a strategic approach during industrial production where part of the deformation reduction in low temperature range can be shifted to the medium temperature range to release rolling mill loads.
基金supported from the National Natural Science Foundation of China(No.52130408)the Hunan Scientific Technology Project,China(Nos.2019RS3007,2020WK2003)the Fundamental Research Funds for the Central Universities of Central South University,China。
文摘First,strip cast samples of high strength microalloyed steel with sub-rapid solidification characteristics were prepared by simulated strip casting technique.Next,the isothermal growth of austenite grain during the reheating treatment of strip casts was observed in situ through confocal laser scanning microscope(CLSM).The results indicated that the time exponent of grains growth suddenly rise when the isothermal temperature higher than 1000℃.And the activation energy for austenite grain growth were calculated to be 538.0 kJ/mol in the high temperature region(above 1000℃)and 693.2 kJ/mol in the low temperature region(below 1000℃),respectively.Then,the kinetics model of austenite isothermal growth was established,which can predict the austenite grain size during isothermal hold very well.Besides,high density of second phase particles with small size was found during the isothermal hold at the low temperature region,leading to the refinement of austenite grain.After isothermal hold at different temperature for 1800 s,the bainite transformation in microalloyed steel strip was also observed in situ during the continuous cooling process.And growth rates of bainite plates with different nucleation positions and different prior austenite grain size(PAGS)were calculated.It was indicated that the growth rate of the bainite plate is not only related to the nucleation position but also to the PAGS.
文摘针对半双工译码转发中继信道,提出了一种可逼近三节点中继信道容量限的空间耦合RA码的设计方法。针对二进制删除信道,源节点分别向中继节点和目的节点发送空间耦合RA码,中继节点先正确恢复出源节点发送的空间耦合RA,然后再次编码产生额外的校验比特并转发给目的节点;目的节点结合中继节点发送的额外校验比特和源节点发送的空间耦合RA码进行译码,正确恢复出源节点的信息。为了评估所设计的空间耦合RA码在三节点中继信道下的渐近性能,推导了密度进化算法用于计算阈值。阈值分析结果表明,所提出的空间耦合RA码能够同时逼近源到中继链路和源到目的链路的容量限。同时,基于半双工二进制删除中继信道,仿真了所设计的空间耦合RA码的误码性能,结果表明,其误码性能与所推导的密度进化算法计算的阈值结果一致,呈现出逼近于容量限的优异性能,且优于采用空间耦合低密度奇偶校验(Low Density Parity Check,LDPC)码的性能。
基金supported by the National Natural Science Foundation of China(Nos.12022515 and 11975304)the Youth Innovation Promotion Association,Chinese Academy of Sciences(No.Y202063)。
文摘The synergistic damage effect of irradiation and corrosion of reactor structural materials has been a prominent research focus.This paper provides a comprehensive review of the synergistic effects on the third-and fourth-generation fission nuclear energy structural materials used in pressurized water reactors and molten salt reactors.The competitive mechanisms of multiple influencing factors,such as the irradiation dose,corrosion type,and environmental temperature,are summarized in this paper.Conceptual approaches are proposed to alleviate the synergistic damage caused by irradiation and corrosion,thereby promoting in-depth research in the future and solving this key challenge for the structural materials used in reactors.
文摘The BG110E high-strength expansion pipe was developed using medium manganese steel and subjected to a two-phase zone heat treatment process.Mechanical properties and microstructure analysis results have proven that the BG110E expansion pipe exhibits uniform elongation of more than 19%.Moreover,after undergoing expan-sion deformation,its strength,toughness,and plasticity are found to meet the stringent requirements of the P110 pipe.The microstructure of this high-strength expansion pipe,which has a strength of 110 ksi(1 ksi=6.895 MPa),consists of tempered martensite,ferrite,retained austenite,and granular bainite.The propotion of retained austenite reaches up to 12%,ensuring high plasticity and the occurrence of the transformation-induced plasticity effect during the deformation process.Consequently,it enhances the coordinated deformation ability between different phases,which significantly improves the internal yield pressure of the BG110E high-strength expansion pipe in turn.
文摘All tissues in the body are subjected externally to gravity and internally by collagenfibril and cellular retractive forces that create stress and energy equilibrium required for homeostasis.Mechanotransduction involves mechanical work(force through a distance)and energy storage as kinetic and potential energy.This leads to changes in cell mitosis or apoptosis and the synthesis or loss of tissue components.It involves the application of energy directly to cells through integrin-mediated processes,cell-cell connections,stretching of the cell cytoplasm,and activation of the cell nucleus via yes-associated protein(YAP)and transcriptional coactivator with PDZ-motif(TAZ).These processes involve numerous complexes,intermediate molecules,and multiple pathways.Several pathways have been identified from research studies on vertebrate cell culture and from studies in invertebrates.These pathways involve mechanosensors and other molecules that activate the pathways.This review discusses the mitogen-activated protein kinase(MAPK)family,Hippo,Hedgehog,and Wingless-related integration site(WNT)/βcatenin signaling pathways.The mediators covered includeβcatenin,ion channels,growth factors,hormone receptors,members of the Ras superfamily,and components of the linker of nucleoskeleton and cytoskeleton(LINC)complex.However,the interrelationship among the different pathways remains to be clarified.Integrin-mediated mechanotransduction involves direct tensile loading and energy applied to the cell membrane via collagenfibril stretching.This energy is transferred between cells by stretching the cell-cell connections involving cadherins and the WNT/βcatenin pathway.These alterations induce changes in intracellular events in the cytoskeleton and nuclear skeleton caused by the release of YAP and TAZ.These coactivators then penetrate through the nuclear pores and influence nuclear cell function.Alteration in the balance of forces and energy applied to cells and tissues is hypothesized to shift the cell-extracellular matrix mechanical equilibrium by modifying mechanotransduction.The shift in equilibrium can lead to either tissue synthesis,genetic modifications,or promotefibrotic diseases,including epithelial cell-derived cancers,depending on the local metabolic conditions.