Air quality models are tools capable to predict the physical and chemical processes that affect air pollutants as they disperse and reacts in the atmosphere. These models need input containing meteorological data, ter...Air quality models are tools capable to predict the physical and chemical processes that affect air pollutants as they disperse and reacts in the atmosphere. These models need input containing meteorological data, terrestrial data and emissions. Meteorological and terrestrial data comes from different sources such as meteorological stations and satellite images which are important to represent the current state of the atmosphere and are available at least on a daily frequency. On the other hand, the emission data comes from pollution inventories generated mainly from governmental reports, this data needs to be processed by various reasons such as the correction of outdated emissions, for combining inventories or to speciate the emitted pollutants to different chemical mechanisms. EmissV is a code written into a high-level programming language to create emissions input for these atmospheric models. The emissions from EmissV are coherent with the total and the spatial distribution of emissions obtained from other preprocessors.展开更多
The design of a 2. 488 Gbit/s clock and data recovery （CDR） If for synchronous digital hierarchy （SDH） STM-16 receiver is described. Based on the injected phase-locked loop （IPLL） and D-flip flop architectures, ...The design of a 2. 488 Gbit/s clock and data recovery （CDR） If for synchronous digital hierarchy （SDH） STM-16 receiver is described. Based on the injected phase-locked loop （IPLL） and D-flip flop architectures, the CDR IC was implemented in a standard 0. 35 μan complementary metal-oxide-semiconductor （CMOS） technology. With 2^31 -1 pseudorandom bit sequences （PRBS） input, the sensitivity of data recovery circuit is less than 20 mV with 10^-12 bit error rate （BER）. The recovered clock shows a root mean square （rms） jitter of 2. 8 ps and a phase noise of - 110 dBc/Hz at 100 kHz offset. The capture range of the circuit is larger than 40 MHz. With a 5 V supply, the circuit consumes 680 mW and the chip area is 1.49 mm × 1 mm.展开更多
文摘Air quality models are tools capable to predict the physical and chemical processes that affect air pollutants as they disperse and reacts in the atmosphere. These models need input containing meteorological data, terrestrial data and emissions. Meteorological and terrestrial data comes from different sources such as meteorological stations and satellite images which are important to represent the current state of the atmosphere and are available at least on a daily frequency. On the other hand, the emission data comes from pollution inventories generated mainly from governmental reports, this data needs to be processed by various reasons such as the correction of outdated emissions, for combining inventories or to speciate the emitted pollutants to different chemical mechanisms. EmissV is a code written into a high-level programming language to create emissions input for these atmospheric models. The emissions from EmissV are coherent with the total and the spatial distribution of emissions obtained from other preprocessors.
文摘The design of a 2. 488 Gbit/s clock and data recovery （CDR） If for synchronous digital hierarchy （SDH） STM-16 receiver is described. Based on the injected phase-locked loop （IPLL） and D-flip flop architectures, the CDR IC was implemented in a standard 0. 35 μan complementary metal-oxide-semiconductor （CMOS） technology. With 2^31 -1 pseudorandom bit sequences （PRBS） input, the sensitivity of data recovery circuit is less than 20 mV with 10^-12 bit error rate （BER）. The recovered clock shows a root mean square （rms） jitter of 2. 8 ps and a phase noise of - 110 dBc/Hz at 100 kHz offset. The capture range of the circuit is larger than 40 MHz. With a 5 V supply, the circuit consumes 680 mW and the chip area is 1.49 mm × 1 mm.
