This research aimed to investigate the effect of pulping conditions and refining intensities of wheat straw to be recommended for fluff pulp production.For this purpose,mono ethanol amine(MEA)was selected as a de-lign...This research aimed to investigate the effect of pulping conditions and refining intensities of wheat straw to be recommended for fluff pulp production.For this purpose,mono ethanol amine(MEA)was selected as a de-lignification agent at three levels of 50:50,25:75,and 15:85(MEA/water,W/V%),and soda-AQ 14 W/V%was used as a reference pulping.To investigate the optimal refining intensity,the obtained pulp was passed through a single disk laboratory refiner from 0 to 6 times and in two different consistencies(1.5 and 2.5 W/V%).Total yield,kappa number,ash content,and the Schopper-Riegler(SR°)freeness of the prepared pulps were investigated.Finally,hand sheets with a targeted basic weight of 70 g/m^(2) were made according to the related standards.The hand sheets were characterized using Fourier transform infrared(FTIR)spectroscopy and a field emission scanning electron microscope(FE-SEM).Sheet density,brightness,and mechanical properties such as burst,tensile,and tear indices were also investigated.The FE-SEM photographs showed that the texture of the hand sheet became denser as the refining intensity increased.External fibrillation on the surface of the fibers was also observed,especially on those refined with 2.5%consistency.The results of the chemical composition of wheat straw indicated that wheat straw containing a high percentage of holocellulose is an excellent candidate for the production of fluff pulp.The total yield and kappa number of MEA pulps increased with the decrease in MEA concentration.FTIR results indicated the presence of a peak related to amino groups in the pulp related to MEA pulp.The results also indicated that the mechanical properties of the papers,except for the tear index,were enhanced as the intensity of refining and the pulp consistency during refining increased.展开更多
Morphological characteristics and proximate chemical analysis of E. binata showed it as a suitable raw material for writing and printing grade paper. Maximum pulp yield (43.58%) of kappa number 17.38 with 0.9% screeni...Morphological characteristics and proximate chemical analysis of E. binata showed it as a suitable raw material for writing and printing grade paper. Maximum pulp yield (43.58%) of kappa number 17.38 with 0.9% screening rejects was obtained at 12% of active alkali (as Na2O) pulping temperature 130°C, cooking time 120 min and solid to liquor ratio 1:4. During bio-soda pulping of E. binata, pulp yield decreased slightly while pulp brightness, tensile index, burst index and double fold numbers were improved by 4.1%, 24.94%, 14.03% and 48.45% respectively compared to soda pulping. During ethanol-soda pulping of E. binata, pulp yield, pulp brightness, tensile index, burst index and double fold numbers were improved by 3.9%, 6.6%, 32.18%, 35.40% and 77.31% respectively compared to soda pulping.展开更多
On the conditions of different ethanol concentration, acids and catalyzers, the effects of ethanol pulping on the cellulose length of bamboo were studied. The results indicates that ethanol pulping has remarkable effe...On the conditions of different ethanol concentration, acids and catalyzers, the effects of ethanol pulping on the cellulose length of bamboo were studied. The results indicates that ethanol pulping has remarkable effects on the length of cellulose, which is clearly reduced with adding ethanol and acid. The margin of length of cellulose become smaller with the increase of the catalyzer. When the ethanol concentration was 70%, the concentration of acid was 0.3% and some NaOH was used as catalyzer, the length of cellulose was the longest.展开更多
The effect of washing temperature, washing stages and the cooking operation on the ethanol pulp had been investigated, and the reason for higher kappa number of the ethanol pulp was discussed. The results preliminaril...The effect of washing temperature, washing stages and the cooking operation on the ethanol pulp had been investigated, and the reason for higher kappa number of the ethanol pulp was discussed. The results preliminarily showed that the dissolved lignin could re-adsorb to fiber surface by means of fiber classification technology and explained the questions found during the study. Some measures were taken to reduce the kappa number, the results had shown that there was obvious absorption in the ethanol pulping; lignin remained in the pulp could easily be dissolved and the pulp with lower kappa number could be obtained at a higher temperature; the kappa number could reduce by increasing washing time; it could enable dissolved lignin to separate out from the ethanol pulp and restrain the lignin absorption by blowing cooking liquid at high temperature.展开更多
Amylolytic enzymes are currently investigated to improve industrial processes of starch degradation. Saccharomyces diastaticus 2047 isolated from cassava waste showed amylase and glucoamylase production, using starch ...Amylolytic enzymes are currently investigated to improve industrial processes of starch degradation. Saccharomyces diastaticus 2047 isolated from cassava waste showed amylase and glucoamylase production, using starch medium, and the highest rate was obtained in the initial growth phase, after incubation for 24 h at pH 5.5. Maximum amylase and glucoamylase activities （483.62 U mg^-1 protein and 290.85 U mg^-1 protein） were obtained at pH 5.5. The isolated enzymes exhibited thermostable properties as indicated by retention of 100% of residual activity at 55 ℃ for 45 min with total inhibition at 100 ℃. Extracellular enzyme from S diastaticus 2047 was partially purified by fractionated precipitation with ammonium sulphate. After 40% saturation produced 2,197.00 and 1,192.83 U/mg protein, and yield was 40% with purification 4.54 and 4.1 fold, respectively. This study presents feasibility on ethanol production from cassava pulps pretreated with diluted sulfuric acid by simultaneous saccharification and fermentation （SSF） with S. diastaticus 2047. The results indicated that the culture was able to produce ethanol with high yield without amylolytic enzyme adding by using cassava pulps pretreated with distilled water at 135 ℃ under pressure of 15 lb/inch^2 to produce ethanol yield as high as the cassava pulps pretreated with diluted sulfuric acid under the same condition. This suggests that S diastaticus with enzyme produced has potential for industrial applications.展开更多
基金This study was financially supported by Iranian National Science Foundation(project number of 4020345).
文摘This research aimed to investigate the effect of pulping conditions and refining intensities of wheat straw to be recommended for fluff pulp production.For this purpose,mono ethanol amine(MEA)was selected as a de-lignification agent at three levels of 50:50,25:75,and 15:85(MEA/water,W/V%),and soda-AQ 14 W/V%was used as a reference pulping.To investigate the optimal refining intensity,the obtained pulp was passed through a single disk laboratory refiner from 0 to 6 times and in two different consistencies(1.5 and 2.5 W/V%).Total yield,kappa number,ash content,and the Schopper-Riegler(SR°)freeness of the prepared pulps were investigated.Finally,hand sheets with a targeted basic weight of 70 g/m^(2) were made according to the related standards.The hand sheets were characterized using Fourier transform infrared(FTIR)spectroscopy and a field emission scanning electron microscope(FE-SEM).Sheet density,brightness,and mechanical properties such as burst,tensile,and tear indices were also investigated.The FE-SEM photographs showed that the texture of the hand sheet became denser as the refining intensity increased.External fibrillation on the surface of the fibers was also observed,especially on those refined with 2.5%consistency.The results of the chemical composition of wheat straw indicated that wheat straw containing a high percentage of holocellulose is an excellent candidate for the production of fluff pulp.The total yield and kappa number of MEA pulps increased with the decrease in MEA concentration.FTIR results indicated the presence of a peak related to amino groups in the pulp related to MEA pulp.The results also indicated that the mechanical properties of the papers,except for the tear index,were enhanced as the intensity of refining and the pulp consistency during refining increased.
文摘Morphological characteristics and proximate chemical analysis of E. binata showed it as a suitable raw material for writing and printing grade paper. Maximum pulp yield (43.58%) of kappa number 17.38 with 0.9% screening rejects was obtained at 12% of active alkali (as Na2O) pulping temperature 130°C, cooking time 120 min and solid to liquor ratio 1:4. During bio-soda pulping of E. binata, pulp yield decreased slightly while pulp brightness, tensile index, burst index and double fold numbers were improved by 4.1%, 24.94%, 14.03% and 48.45% respectively compared to soda pulping. During ethanol-soda pulping of E. binata, pulp yield, pulp brightness, tensile index, burst index and double fold numbers were improved by 3.9%, 6.6%, 32.18%, 35.40% and 77.31% respectively compared to soda pulping.
基金The National High-Tech Development863 Program of China (No.2002AA322050)
文摘On the conditions of different ethanol concentration, acids and catalyzers, the effects of ethanol pulping on the cellulose length of bamboo were studied. The results indicates that ethanol pulping has remarkable effects on the length of cellulose, which is clearly reduced with adding ethanol and acid. The margin of length of cellulose become smaller with the increase of the catalyzer. When the ethanol concentration was 70%, the concentration of acid was 0.3% and some NaOH was used as catalyzer, the length of cellulose was the longest.
文摘The effect of washing temperature, washing stages and the cooking operation on the ethanol pulp had been investigated, and the reason for higher kappa number of the ethanol pulp was discussed. The results preliminarily showed that the dissolved lignin could re-adsorb to fiber surface by means of fiber classification technology and explained the questions found during the study. Some measures were taken to reduce the kappa number, the results had shown that there was obvious absorption in the ethanol pulping; lignin remained in the pulp could easily be dissolved and the pulp with lower kappa number could be obtained at a higher temperature; the kappa number could reduce by increasing washing time; it could enable dissolved lignin to separate out from the ethanol pulp and restrain the lignin absorption by blowing cooking liquid at high temperature.
文摘Amylolytic enzymes are currently investigated to improve industrial processes of starch degradation. Saccharomyces diastaticus 2047 isolated from cassava waste showed amylase and glucoamylase production, using starch medium, and the highest rate was obtained in the initial growth phase, after incubation for 24 h at pH 5.5. Maximum amylase and glucoamylase activities （483.62 U mg^-1 protein and 290.85 U mg^-1 protein） were obtained at pH 5.5. The isolated enzymes exhibited thermostable properties as indicated by retention of 100% of residual activity at 55 ℃ for 45 min with total inhibition at 100 ℃. Extracellular enzyme from S diastaticus 2047 was partially purified by fractionated precipitation with ammonium sulphate. After 40% saturation produced 2,197.00 and 1,192.83 U/mg protein, and yield was 40% with purification 4.54 and 4.1 fold, respectively. This study presents feasibility on ethanol production from cassava pulps pretreated with diluted sulfuric acid by simultaneous saccharification and fermentation （SSF） with S. diastaticus 2047. The results indicated that the culture was able to produce ethanol with high yield without amylolytic enzyme adding by using cassava pulps pretreated with distilled water at 135 ℃ under pressure of 15 lb/inch^2 to produce ethanol yield as high as the cassava pulps pretreated with diluted sulfuric acid under the same condition. This suggests that S diastaticus with enzyme produced has potential for industrial applications.
