期刊文献+
共找到17篇文章
< 1 >
每页显示 20 50 100
Optimal zero-crossing group selection method of the absolute gravimeter based on improved auto-regressive moving average model
1
作者 牟宗磊 韩笑 胡若 《Chinese Physics B》 SCIE EI CAS CSCD 2023年第11期347-354,共8页
An absolute gravimeter is a precision instrument for measuring gravitational acceleration, which plays an important role in earthquake monitoring, crustal deformation, national defense construction, etc. The frequency... An absolute gravimeter is a precision instrument for measuring gravitational acceleration, which plays an important role in earthquake monitoring, crustal deformation, national defense construction, etc. The frequency of laser interference fringes of an absolute gravimeter gradually increases with the fall time. Data are sparse in the early stage and dense in the late stage. The fitting accuracy of gravitational acceleration will be affected by least-squares fitting according to the fixed number of zero-crossing groups. In response to this problem, a method based on Fourier series fitting is proposed in this paper to calculate the zero-crossing point. The whole falling process is divided into five frequency bands using the Hilbert transformation. The multiplicative auto-regressive moving average model is then trained according to the number of optimal zero-crossing groups obtained by the honey badger algorithm. Through this model, the number of optimal zero-crossing groups determined in each segment is predicted by the least-squares fitting. The mean value of gravitational acceleration in each segment is then obtained. The method can improve the accuracy of gravitational measurement by more than 25% compared to the fixed zero-crossing groups method. It provides a new way to improve the measuring accuracy of an absolute gravimeter. 展开更多
关键词 absolute gravimeter laser interference fringe Fourier series fitting honey badger algorithm mul-tiplicative auto-regressive moving average(MARMA)model
下载PDF
Application of Seasonal Auto-regressive Integrated Moving Average Model in Forecasting the Incidence of Hand-foot-mouth Disease in Wuhan,China 被引量:16
2
作者 彭颖 余滨 +3 位作者 汪鹏 孔德广 陈邦华 杨小兵 《Journal of Huazhong University of Science and Technology(Medical Sciences)》 SCIE CAS 2017年第6期842-848,共7页
Outbreaks of hand-foot-mouth disease(HFMD) have occurred many times and caused serious health burden in China since 2008. Application of modern information technology to prediction and early response can be helpful ... Outbreaks of hand-foot-mouth disease(HFMD) have occurred many times and caused serious health burden in China since 2008. Application of modern information technology to prediction and early response can be helpful for efficient HFMD prevention and control. A seasonal auto-regressive integrated moving average(ARIMA) model for time series analysis was designed in this study. Eighty-four-month(from January 2009 to December 2015) retrospective data obtained from the Chinese Information System for Disease Prevention and Control were subjected to ARIMA modeling. The coefficient of determination(R^2), normalized Bayesian Information Criterion(BIC) and Q-test P value were used to evaluate the goodness-of-fit of constructed models. Subsequently, the best-fitted ARIMA model was applied to predict the expected incidence of HFMD from January 2016 to December 2016. The best-fitted seasonal ARIMA model was identified as(1,0,1)(0,1,1)12, with the largest coefficient of determination(R^2=0.743) and lowest normalized BIC(BIC=3.645) value. The residuals of the model also showed non-significant autocorrelations(P_(Box-Ljung(Q))=0.299). The predictions by the optimum ARIMA model adequately captured the pattern in the data and exhibited two peaks of activity over the forecast interval, including a major peak during April to June, and again a light peak for September to November. The ARIMA model proposed in this study can forecast HFMD incidence trend effectively, which could provide useful support for future HFMD prevention and control in the study area. Besides, further observations should be added continually into the modeling data set, and parameters of the models should be adjusted accordingly. 展开更多
关键词 hand-foot-mouth disease forecast surveillance modeling auto-regressive integrated moving average(ARIMA)
下载PDF
ARMA-GM combined forewarning model for the quality control
3
作者 WangXingyuan YangXu 《Journal of Systems Engineering and Electronics》 SCIE EI CSCD 2005年第1期224-227,共4页
Three forecasting models are set up: the auto\|regressive moving average model, the grey forecasting model for the rate of qualified products P t, and the grey forecasting model for time intervals of the quality cata... Three forecasting models are set up: the auto\|regressive moving average model, the grey forecasting model for the rate of qualified products P t, and the grey forecasting model for time intervals of the quality catastrophes. Then a combined forewarning system for the quality of products is established, which contains three models, judgment rules and forewarning state illustration. Finally with an example of the practical production, this modeling system is proved fairly effective. 展开更多
关键词 auto-regressive moving average model (ARMA) grey system model (GM) combined forewarning model quality control.
下载PDF
山东省中医类医院卫生人力资源需求预测 被引量:5
4
作者 楚美金 徐文 马漫遥 《中国卫生资源》 CSCD 北大核心 2023年第4期404-409,416,共7页
目的了解山东省中医类医院卫生人力资源的现状,预测卫生人力资源未来的需求量并提出合理建议,以期为相关部门制定中医药人力资源规划提供依据和数据支持。方法运用差分自回归移动平均(auto-regressive moving average,ARIMA)模型、灰色... 目的了解山东省中医类医院卫生人力资源的现状,预测卫生人力资源未来的需求量并提出合理建议,以期为相关部门制定中医药人力资源规划提供依据和数据支持。方法运用差分自回归移动平均(auto-regressive moving average,ARIMA)模型、灰色系统预测模型(grey system forecasting model,GM)中的GM(1,1)模型以及两者的线性组合模型预测2021—2025年山东省中医类医院卫生人力资源需求量,比较不同模型预测的精准度。结果组合模型的系统误差小,预测效果最好;卫生技术人员、执业(助理)医师、中医类别执业(助理)医师、注册护士、药师(士)及中药师(士)2025年对应的人力资源预测值分别是107457人、43304人、22807人、51372人、5718人、3242人。结论山东省中医类别执业(助理)医师数量储备充足,但中药师(士)相对短缺,人才结构不合理,医护比有待优化。建议政府适当地增加中药师(士)的编制,促进执业(助理)医师与中药师(士)平衡发展;增加对中医类医院的财政拨款,加强人才引进力度,创新人才培养机制,优化山东省中医药人才结构;制定科学合理的排班制度,提高护士的社会地位,进一步优化医护比。 展开更多
关键词 差分自回归移动平均模型auto-regressive moving average model ARIMA model GM(1 1)模型GM(1 1)model 组合模型combined model 中医药人力资源Chinese medicine human resources
下载PDF
现代温室温度系统在线建模 被引量:5
5
作者 李晋 秦琳琳 +2 位作者 吴刚 苑媛 吕旭涛 《信息与控制》 CSCD 北大核心 2008年第4期500-508,共9页
在分析温室温度系统机理模型的基础上,分别采用ARMAX模型和ARIMAX模型描述温度系统.选择温室外温度、相对湿度、太阳辐射强度和风速作为系统扰动输入变量,选择温室内温度作为系统输出变量.采用统计假设检验和模型拟合度分析相结合的方... 在分析温室温度系统机理模型的基础上,分别采用ARMAX模型和ARIMAX模型描述温度系统.选择温室外温度、相对湿度、太阳辐射强度和风速作为系统扰动输入变量,选择温室内温度作为系统输出变量.采用统计假设检验和模型拟合度分析相结合的方法确定模型结构,采用渐消记忆递推增广最小二乘法在线辨识模型参数,并构造智能监督级监控在线建模过程.最后对4输入或3输入(忽略风速)的ARMAX模型或ARIMAX模型相互组合,总计4种模型的在线建模及仿真结果进行了对比分析.仿真试验结果表明,带智能监督级的渐消记忆递推增广最小二乘在线建模能够较好地描述现代温室温度系统的动力学特性. 展开更多
关键词 温室 小气候 在线建模 系统辨识 ARMAX ARIMAX 智能监督级
下载PDF
热弹性效应分析与机床进给系统热动态特性建模 被引量:20
6
作者 夏军勇 胡友民 +1 位作者 吴波 史铁林 《机械工程学报》 EI CAS CSCD 北大核心 2010年第15期191-198,共8页
通过一维杆的一维传热的分组显式数值求解,分析热弹性效应的存在及规律,得出随着时间的增长,温升—热变形之间的关系会逐渐趋近稳态,但不可能获得绝对的稳态;在传热过程中,随着距离增加,温度衰减很快,离热源越远的点的热弹性效环应越窄... 通过一维杆的一维传热的分组显式数值求解,分析热弹性效应的存在及规律,得出随着时间的增长,温升—热变形之间的关系会逐渐趋近稳态,但不可能获得绝对的稳态;在传热过程中,随着距离增加,温度衰减很快,离热源越远的点的热弹性效环应越窄。提出用非线性时序模型与前向神经网络相结合的模型(Nonlinear auto-regressive moving average neural network with exogenousinputs,NARMAX-NN)来辨识热弹性效应。用NARMAX-NN模型对高速进给系统试验台的热动态特性进行建模,获得良好的效果。此方法比多变量回归模型、反馈神经网络模型及广义最小二乘输出误差模型有更好的精度和鲁棒性,能精确地对复杂结构、多热源的时变非线性热误差特性进行建模和预测。 展开更多
关键词 热弹性效应 非线性时序神经网络模型 进给系统 系统辨识 热误差建模
下载PDF
面向智能物联的动态负荷预测量子进化方法 被引量:6
7
作者 王铮 王宇乐 王万良 《计算机集成制造系统》 EI CSCD 北大核心 2018年第12期3027-3037,共11页
物联网与智能制造的结合导致大量制造数据的产生,为了实现基于大数据的智能制造电力负荷预测,提出并实现了一种智能物联云计算平台,实现用户与智能物联网之间双向通信控制的快速响应。提出一种基于改进外加输入的自回归滑动平均模型的... 物联网与智能制造的结合导致大量制造数据的产生,为了实现基于大数据的智能制造电力负荷预测,提出并实现了一种智能物联云计算平台,实现用户与智能物联网之间双向通信控制的快速响应。提出一种基于改进外加输入的自回归滑动平均模型的短期动态负荷预测模型,结合平台中的智能传感设备和历史负荷、天气变化等综合数据,作为预测模型的外部输入变量,并利用改进的实数编码量子进化算法对预测模型进行参数估计以提高动态负荷预测的准确性。利用智能制造企业的实际负荷数据,采用所提方法进行预测并与实际负荷数据及传统方法的预测结果进行比较,实验结果表明,所提方案和算法能够有效提高智能制造过程中短期动态负荷预测的精度,同时通过并行化计算提升负荷预测的速度。 展开更多
关键词 智能电网 智能制造 短期负荷预测 外加输入的自回归滑动平均模型 量子进化算法 云计算
下载PDF
人工胰脏中数据驱动个体血糖代谢模型的辨识 被引量:2
8
作者 李鹏 祝楠楠 +1 位作者 郁磊 王弼陡 《仪器仪表学报》 EI CAS CSCD 北大核心 2016年第3期714-720,共7页
数据驱动时间序列模型是人工胰脏系统中最常用的一类血糖预测模型,但其血糖预测精度受到进食不确定性和胰岛素敏感性波动等实际因素的影响。本文从真实血糖测量数据入手,提出基于卡尔曼滤波参数估计的带输入误差滑动平均模型的辨识方法... 数据驱动时间序列模型是人工胰脏系统中最常用的一类血糖预测模型,但其血糖预测精度受到进食不确定性和胰岛素敏感性波动等实际因素的影响。本文从真实血糖测量数据入手,提出基于卡尔曼滤波参数估计的带输入误差滑动平均模型的辨识方法,将辨识结果与最小二乘法辨识结果进行对比。结果表明,本文提出的辨识方法具有辨识精度高(FIT:90.05±3.12%v.s.54.41±9.56%)、能有效抵消实际因素的影响、对不同特征的个体能获得稳定的辨识结果等优势。 展开更多
关键词 卡尔曼滤波参数估计 带输入误差自回归滑动平均模型 数据驱动模型 个体化血糖代谢模型 人工胰脏
下载PDF
麻醉深度的听觉诱发脑电提取技术
9
作者 田福英 乐建威 王群 《中国医疗器械杂志》 CAS 2007年第5期330-332,共3页
大量研究证明听觉诱发电位(AEP)在麻醉深度监测方面的临床意义.本文论述了移动平均模式(MTA)和外因输入自回归模式(ARX)提取AEP的原理,通过对两种提取听觉诱发电位的研究证明,ARX模式更能满足临床麻醉深度监测的实时性要求。
关键词 听觉诱发电位(AEP) 麻醉深度 移动平均模式(MTA) 外因输入自回归模式(ARX)
下载PDF
对于反卷积系统的未知输入噪声的信息融合估计算法
10
作者 李恒 赵正平 李怀敏 《华北科技学院学报》 2016年第1期121-124,共4页
对于一个反卷积系统,当系统输入噪声未知时,提出一种信息融合估计算法。该算法的核心是自回归滑动平均模型(ARMA)模型和Gevers-Wouters算法。应用该算法可以得到对未知输入噪声和未知滑动平均参数的局部和融合估计,并证明了该算法的收... 对于一个反卷积系统,当系统输入噪声未知时,提出一种信息融合估计算法。该算法的核心是自回归滑动平均模型(ARMA)模型和Gevers-Wouters算法。应用该算法可以得到对未知输入噪声和未知滑动平均参数的局部和融合估计,并证明了该算法的收敛性。用Matlab对一个例子进行仿真得到估值收敛于真实值,从而对算法的有效性进行了验证。 展开更多
关键词 反卷积系统 输入噪声 自回归滑动平均模型 Gevers-Wouters算法 信息融合估计算法
下载PDF
Dam deformation analysis based on BPNN merging models 被引量:1
11
作者 Jingui Zou Kien-Trinh Thi Bui +1 位作者 Yangxuan Xiao Chinh Van Doan 《Geo-Spatial Information Science》 SCIE CSCD 2018年第2期149-157,共9页
Hydropower has made a significant contribution to the economic development of Vietnam,thus it is important to monitor the safety of hydropower dams for the good of the country and the people.In this paper,dam horizont... Hydropower has made a significant contribution to the economic development of Vietnam,thus it is important to monitor the safety of hydropower dams for the good of the country and the people.In this paper,dam horizontal displacement is analyzed and then forecasted using three methods:the multi-regression model,the seasonal integrated auto-regressive moving average(SARIMA)model and the back-propagation neural network(BPNN)merging models.The monitoring data of the Hoa Binh Dam in Vietnam,including horizontal displacement,time,reservoir water level,and air temperature,are used for the experiments.The results indicate that all of these three methods can approximately describe the trend of dam deformation despite their different forecast accuracies.Hence,their short-term forecasts can provide valuable references for the dam safety. 展开更多
关键词 Dam deformation analysis multi-regression model Back-propagation Neural Network(BPNN) Seasonal Integrated auto-regressive moving average(SARIMA)model merging model
原文传递
一种容腔效应标定技术及其在高频响动态探针中的应用 被引量:14
12
作者 李继超 王偲臣 +2 位作者 林峰 聂超群 Shoen M P 《航空动力学报》 EI CAS CSCD 北大核心 2011年第12期2749-2756,共8页
介绍一种容腔效应标定方法,以理论模型推导与实验验证相结合的方式,完成了对高频响动态探针的动态标定,并通过ARMAX(自动回归滑动平均)模型辨识得到了容腔的传递函数.结果表明该方法简单可行,能够很好地通过探针的动态响应信号来确定探... 介绍一种容腔效应标定方法,以理论模型推导与实验验证相结合的方式,完成了对高频响动态探针的动态标定,并通过ARMAX(自动回归滑动平均)模型辨识得到了容腔的传递函数.结果表明该方法简单可行,能够很好地通过探针的动态响应信号来确定探针容腔的传递函数,从而确定测量信号和真实信号之间的关系,对今后考虑容腔效应的动态标定提供了参考. 展开更多
关键词 高频响动态探针 容腔效应 阶跃响应 ARMAX(自动回归滑动平均) 模型辨识
原文传递
基于Allan方差和等效定理的光纤陀螺随机误差辨识方法(英文) 被引量:2
13
作者 唐江河 付振宪 邓正隆 《Chinese Journal of Aeronautics》 SCIE EI CAS CSCD 2009年第3期273-278,共6页
An identification method using Allan variance and equivalent theorem is proposed to identify non-stationary sensor errors mixed out of different simple noises. This method firstly derives the discrete Allan variances ... An identification method using Allan variance and equivalent theorem is proposed to identify non-stationary sensor errors mixed out of different simple noises. This method firstly derives the discrete Allan variances of all component noises inherent in noise sources in terms of their different equations; then the variances are used to estimate the parameters of all component noise models; finally, the original errors are represented by the sum of the non-stationary component noise model and the equivalent m... 展开更多
关键词 Allan variance equivalent theorem NON-STATIONARY auto-regressive and moving average model ring laser gyro
原文传递
多目标免疫GEP算法及其在多项式NARMAX模型辨识中的应用 被引量:8
14
作者 周霞 沈炯 《控制与决策》 EI CSCD 北大核心 2014年第6期1009-1015,共7页
基于免疫细胞亚群划分理论和生命周期理论,提出一种用于多项式非线性自回归滑动平均(NARMAX)模型辨识的多目标免疫GEP算法,并重新定义了适合于NARMAX模型辨识的细胞创建算子和基因操作算子.该算法基于多目标优化的最优解通常为一个集合... 基于免疫细胞亚群划分理论和生命周期理论,提出一种用于多项式非线性自回归滑动平均(NARMAX)模型辨识的多目标免疫GEP算法,并重新定义了适合于NARMAX模型辨识的细胞创建算子和基因操作算子.该算法基于多目标优化的最优解通常为一个集合的特点,通过各亚群的最优解集在总最优解集中的变化来判断各亚群所对应参数的优劣,进而确定下一步的搜索方向.仿真结果表明,多目标免疫GEP算法可以同时正确地辨识出非线性系统的结构和参数. 展开更多
关键词 多目标 免疫 基因表达式编程 非线性自回归滑动平均模型
原文传递
基于ARIMA-NARNN组合模型的血吸虫感染率预测研究 被引量:8
15
作者 王克伟 吴郁 +1 位作者 李金平 蒋玉宇 《中国血吸虫病防治杂志》 CAS CSCD 北大核心 2016年第6期630-634,共5页
目的探讨ARIMA-NARNN组合模型预测血吸虫感染率的有效性。方法利用2005年1月至2015年2月江苏省血吸虫感染率资料分别建立ARIMA模型、NARNN模型和ARIMA-NARNN组合模型,比较各模型的拟合和预测效果。结果相比较ARIMA模型和NARNN模型,ARIMA... 目的探讨ARIMA-NARNN组合模型预测血吸虫感染率的有效性。方法利用2005年1月至2015年2月江苏省血吸虫感染率资料分别建立ARIMA模型、NARNN模型和ARIMA-NARNN组合模型,比较各模型的拟合和预测效果。结果相比较ARIMA模型和NARNN模型,ARIMA-NARNN组合模型预测样本的MSE、MAE和MAPE均最小,分别为0.011 1、0.090 0和0.282 4。结论 ARIMA-NARNN组合模型能有效模拟和预测血吸虫感染率,具有较好的推广应用价值。 展开更多
关键词 自回归滑动平均模型 非线性自回归神经网络 时间序列 血吸虫病 预测 AUTOREGRESSIVE integrated moving average model (ARIMA) Nonlinear auto-regressive neural network (NARNN)
原文传递
基于激光雷达-Armax的风机轮毂处有效风速预测 被引量:1
16
作者 曹松青 郝万君 +2 位作者 王昊 孙志辉 周嘉玉 《激光与光电子学进展》 CSCD 北大核心 2020年第17期220-226,共7页
大型风电机组轮毂处的有效风速难以直接测量,传统的风速估计方法具有滞后性,而泰勒冻结湍流假设忽略了激光雷达测量点到轮毂处的风场结构变化,影响了测量数据的准确性。针对上述问题,利用自回归移动平均与外源输入(Armax)模型对风演变... 大型风电机组轮毂处的有效风速难以直接测量,传统的风速估计方法具有滞后性,而泰勒冻结湍流假设忽略了激光雷达测量点到轮毂处的风场结构变化,影响了测量数据的准确性。针对上述问题,利用自回归移动平均与外源输入(Armax)模型对风演变过程进行建模。采用粒子群优化算法来估计模型参数,并对常规粒子群算法的惯性权重进行改进以防止陷入局部最小值。为确保风电系统控制动作的实时性、快速性,根据所建立的模型对轮毂处有效风速提前一步预测。运用Fast和Matlab/Simulink软件,以平均风速为7 m/s、湍流强度为A类级别的风况为例进行联合仿真,仿真结果表明,所提方法具有较高的实时性和准确性,比传统的风速估计方法效果更佳。 展开更多
关键词 激光光学 激光雷达 风电机组 自回归移动平均与外源输入模型 改进粒子群算法
原文传递
A Hybrid Time-delay Prediction Method for Networked Control System 被引量:8
17
作者 Zhong-Da Tian Xian-Wen Gao Kun Li 《International Journal of Automation and computing》 EI CSCD 2014年第1期19-24,共6页
This paper presents an Ethernet based hybrid method for predicting random time-delay in the networked control system.First,db3 wavelet is used to decompose and reconstruct time-delay sequence,and the approximation com... This paper presents an Ethernet based hybrid method for predicting random time-delay in the networked control system.First,db3 wavelet is used to decompose and reconstruct time-delay sequence,and the approximation component and detail components of time-delay sequences are fgured out.Next,one step prediction of time-delay is obtained through echo state network(ESN)model and auto-regressive integrated moving average model(ARIMA)according to the diferent characteristics of approximate component and detail components.Then,the fnal predictive value of time-delay is obtained by summation.Meanwhile,the parameters of echo state network is optimized by genetic algorithm.The simulation results indicate that higher accuracy can be achieved through this prediction method. 展开更多
关键词 Networked control system wavelet transform auto-regressive integrated moving average model echo state network genetic algorithm time-delay prediction
原文传递
上一页 1 下一页 到第
使用帮助 返回顶部