We report a new design of microwave source for X-band electron paramagnetic resonance spectrometer.The microwave source is equipped with a digital automatic frequency control circuit.The parameters of the digital auto...We report a new design of microwave source for X-band electron paramagnetic resonance spectrometer.The microwave source is equipped with a digital automatic frequency control circuit.The parameters of the digital automatic frequency control circuit can be flexibly configured for different experimental conditions,such as the input powers or the quality factors of the resonator.The configurability makes the microwave source universally compatible and greatly extends its application.To demonstrate the ability of adapting to various experimental conditions,the microwave source is tested by varying the input powers and the quality factors of the resonator.A satisfactory phase noise as low as-135 d Bc/Hz at 100-k Hz offset from the center frequency is achieved,due to the use of a phase-locked dielectric resonator oscillator and a direct digital synthesizer.Continuous-wave electron paramagnetic resonance experiments are conducted to examine the performance of the microwave source.The outstanding performance shows a prospect of wide applications of the microwave source in numerous fields of science.展开更多
In order to realize automatic tracking drift of resonance frequency of ultrasonic vibration system with high power and high quality factor Q,adaptive fuzzy control was studied with a self-fabricated ultrasonic plastic...In order to realize automatic tracking drift of resonance frequency of ultrasonic vibration system with high power and high quality factor Q,adaptive fuzzy control was studied with a self-fabricated ultrasonic plastic welding machine.At first,relations between amplitude of vibration and frequency as well as main loop current and amplitude of vibration were analyzed.From this analysis,we deduced that frequency tracking process of the vibration system can be concluded as an optimizing problem of one dimensional fluctuant extremum of main loop current in vibration system.Then a method of self-optimizing fuzzy control,used for the realization of automatic frequency tracking in vibration system,is presented on the basis of self-optimizing adaptive control approach and fuzzy control approach.The result of experiments shows that the fuzzy self-optimizing method can solve the problem of tracking frequency drift very well.Response time of tracking in the system is less than 50 ms,which basically meets the requirements of frequency tracking in ultrasonic plastic welding machine.展开更多
Aimed at the welding ttechnological requirements of foe missile shell,a computer control system for automatic TIG welding of aluminium alloy sheets has been developed in this paper.The hardware of the system is compos...Aimed at the welding ttechnological requirements of foe missile shell,a computer control system for automatic TIG welding of aluminium alloy sheets has been developed in this paper.The hardware of the system is composed of the four sub-systems,i.e.weldingpower source,arc length controller,welding wire feeder and welding head traveller.The software of the system comprises the on-line executing program and the off-line serving program.The operating principle,specifications and control of the system are introduced.The experiments indicate that the system possesses rational hardware structure and practical software function,and has solved the problem of high frequency interference to the computer control system. Therefore,the control system can satisfy the requirements of automatic TIG welding of the missile shell.展开更多
In this paper a new automatic frequency control (AFC) scheme was proposed, which could be used for the receiver of low earth orbit (LEO) satellite communication system in continuous transmitting scenario. By emplo...In this paper a new automatic frequency control (AFC) scheme was proposed, which could be used for the receiver of low earth orbit (LEO) satellite communication system in continuous transmitting scenario. By employing the time varying characteristic of particle filter technique, the new scheme combined the preamble based estimating step and data based estimating step to provide initial probability density recursively. Theoretical analysis proved that the proposed AFC scheme could provide better performance than the two-step scheme. The same conclusion was achieved by computer simulations with the criteria of root-mean square (RMS) frequency estimating performance and bit error rate performance.展开更多
Reliable connection of turbine generators in complex main wiring structures to the power grid through a plurality of switches is a new key problem,referred to as multipoint automatic synchronization(MPAS),in automatic...Reliable connection of turbine generators in complex main wiring structures to the power grid through a plurality of switches is a new key problem,referred to as multipoint automatic synchronization(MPAS),in automatic control systems(ACS).In this paper,different methods of voltage-frequency and phase-difference control are analyzed,and a control methodology based on active frequency tracking(AFT)is presented.Through the establishment of the multi-point automatic synchronization model and the analysis of the governor transfer function with this control method,the important control parameters and automatic process control sequence are summarized.The correctness and effectiveness of the designed methodology are inspected through on-site testing,and the importance of the function and selection of parameters are also explored.展开更多
基金Project supported by the Chinese Academy of Sciences(Grant Nos.XDC07000000 and GJJSTD20200001)Hefei Comprehensive National Science CenterYouth Innovation Promotion Association of Chinese Academy of Sciences for the support。
文摘We report a new design of microwave source for X-band electron paramagnetic resonance spectrometer.The microwave source is equipped with a digital automatic frequency control circuit.The parameters of the digital automatic frequency control circuit can be flexibly configured for different experimental conditions,such as the input powers or the quality factors of the resonator.The configurability makes the microwave source universally compatible and greatly extends its application.To demonstrate the ability of adapting to various experimental conditions,the microwave source is tested by varying the input powers and the quality factors of the resonator.A satisfactory phase noise as low as-135 d Bc/Hz at 100-k Hz offset from the center frequency is achieved,due to the use of a phase-locked dielectric resonator oscillator and a direct digital synthesizer.Continuous-wave electron paramagnetic resonance experiments are conducted to examine the performance of the microwave source.The outstanding performance shows a prospect of wide applications of the microwave source in numerous fields of science.
基金Sponsored by the Natural Science Foundation of Shanghai Education Committee(Grant No.05LZ13)Shanghai Leading Academic Discipline Project(Grant No. P1303)Shanghai Elitist Project(Grant No.04YQHB126)
文摘In order to realize automatic tracking drift of resonance frequency of ultrasonic vibration system with high power and high quality factor Q,adaptive fuzzy control was studied with a self-fabricated ultrasonic plastic welding machine.At first,relations between amplitude of vibration and frequency as well as main loop current and amplitude of vibration were analyzed.From this analysis,we deduced that frequency tracking process of the vibration system can be concluded as an optimizing problem of one dimensional fluctuant extremum of main loop current in vibration system.Then a method of self-optimizing fuzzy control,used for the realization of automatic frequency tracking in vibration system,is presented on the basis of self-optimizing adaptive control approach and fuzzy control approach.The result of experiments shows that the fuzzy self-optimizing method can solve the problem of tracking frequency drift very well.Response time of tracking in the system is less than 50 ms,which basically meets the requirements of frequency tracking in ultrasonic plastic welding machine.
文摘Aimed at the welding ttechnological requirements of foe missile shell,a computer control system for automatic TIG welding of aluminium alloy sheets has been developed in this paper.The hardware of the system is composed of the four sub-systems,i.e.weldingpower source,arc length controller,welding wire feeder and welding head traveller.The software of the system comprises the on-line executing program and the off-line serving program.The operating principle,specifications and control of the system are introduced.The experiments indicate that the system possesses rational hardware structure and practical software function,and has solved the problem of high frequency interference to the computer control system. Therefore,the control system can satisfy the requirements of automatic TIG welding of the missile shell.
基金supported by the National Basic Research Program of China (2009CB320401)the National Science and Technology Major Project of China (2012ZX03004005-002)+1 种基金the New Generation Broadband Wireless Mobile Communication Network of Major Special Projects (2010ZX03003-001)the Fundamental Research Funds for the Central Universities (2010PTB-03-04 G470220)
文摘In this paper a new automatic frequency control (AFC) scheme was proposed, which could be used for the receiver of low earth orbit (LEO) satellite communication system in continuous transmitting scenario. By employing the time varying characteristic of particle filter technique, the new scheme combined the preamble based estimating step and data based estimating step to provide initial probability density recursively. Theoretical analysis proved that the proposed AFC scheme could provide better performance than the two-step scheme. The same conclusion was achieved by computer simulations with the criteria of root-mean square (RMS) frequency estimating performance and bit error rate performance.
文摘“双碳”目标的实施加速了新型电力系统发展。然而,新型电力系统的转动惯量和调节能力逐渐难以适应复杂多变的负荷变化。因此,开发更高效、更快速的调频资源参与自动发电控制(automatic generation control,AGC)已成为刻不容缓之事。但是,不同调频机组之间的异质性显著,包括机组模型、容量和响应速度的差异,这对AGC提出了挑战。为了提升异质调频资源参与AGC的性能,该文提出了一种分布式协同AGC方法。首先,基于分布式固定时间一致性理论提出了一种分布式固定时间区域控制偏差(area control error,ACE)发掘算法。随后,各AGC机组根据获取的ACE信息设计独立的PI控制器参与频率调节。在ACE调节的最后阶段,根据各机组出力的标幺值,设计了分布式固定时间功率均分控制器,控制低速AGC机组承担更多的功率调整量,从而释放高速AGC机组的容量并为下一轮AGC服务做好准备。通过对包含5种不同调频单元的两区域电力系统进行仿真研究,验证了所提分布式协同AGC方法的性能。结果表明,所提方法可以有效地提高系统的调频性能,且能够在设计的时间内实现期望的有功功率分配。
文摘随着不确定性可再生能源大规模并网,电网频率特性日益复杂。传统火电机组具有响应时间长、无法准确跟踪指令等问题,亟须利用储能提高火电机组参与自动发电控制(automatic generation control,AGC)调频时的调节性能。首先,针对调频考核规则,建立调频性能指标数学模型,并考虑火储系统出力特性,结合改进层次分析法校正调频子指标权重系数,以此构建以调频性能最优为目标的第一阶段优化模型;在此基础上,为了减少储能荷电状态(state of charge,SOC)越限和深度充放情况,以储能SOC偏差最小为目标构建第二阶段优化模型。仿真验证表明:所提的两阶段调频方法能够提高火储联合系统的调频性能和调频收益,同时有效减少储能深度充放情况和工作寿命损耗,提高储能辅助调频服务的可持续性。
文摘Reliable connection of turbine generators in complex main wiring structures to the power grid through a plurality of switches is a new key problem,referred to as multipoint automatic synchronization(MPAS),in automatic control systems(ACS).In this paper,different methods of voltage-frequency and phase-difference control are analyzed,and a control methodology based on active frequency tracking(AFT)is presented.Through the establishment of the multi-point automatic synchronization model and the analysis of the governor transfer function with this control method,the important control parameters and automatic process control sequence are summarized.The correctness and effectiveness of the designed methodology are inspected through on-site testing,and the importance of the function and selection of parameters are also explored.
文摘在微波通信系统中,滤波器作为通信系统中不可缺少的微波无源器件,其性能指标直接影响整个通信系统的性能。与传统滤波器相比,微机电系统(Micro-Electro-Mechanical System,MEMS)滤波器具有集成度高、小型化等优点,其中腔体结构在RF MEMS滤波器中有着广泛的应用。感应耦合等离子刻蚀是实现三维腔体结构的关键技术,其刻蚀均匀性直接影响腔体滤波器的性能指标。过程控制监控(Process Control Monitoring,PCM)是MEMS工艺控制中的重要监控手段,利用自动测试系统,论述了用于自动测试的PCM图形,通过数据处理得到硅腔深度分布图,并拟合出硅腔深度和中心频率对应关系,反应了当前刻蚀的工艺能力,为后续产品设计、提高刻蚀均匀性及优化版图设计提供了数据支撑。