Adaptive Clutch Engaging Process Control for Automatic Mechanical Transmission

Based on detail analysis of clutch engaging process control targets and adaptive demands, a control strategy which is based on speed signal, different from that of based on main clutch displacement signal, is put forward. It considers both jerk and slipping work which are the most commonly used quality evaluating indexes of vehicle starting phase. The adaptive control system and its reference model are discussed profoundly. Taking the adaptability to different starting gears and different road conditions as examples, some proving field test records are shown to illustrate the main clutch adaptive control strategy at starting phase. Proving field test gives acceptable results.

Defect Analysis and Innovation Design of Synchronizer for Clutchless Automatic Mechanical Transmission

The synchronizer is a key component of automatic mechanical transmission(AMT)equipped in electric vehicles,but the inertial lock-ring synchronizer(ILRS)commonly used there is not suitable especially for pure electric vehicles without a clutch because of big shift impact.To make the shifting process rapid and smooth,a new synchronizer named pressure-controllable friction ring synchronizer(PCFRS)was designed.Initially,the inevitable shortcoming of ILRS was verified by simulation and test.Furthermore,the mechanical characteristics and advantages of the new synchronizer over ILRS were analyzed.Then,the formulations describing the dynamic transmission based on the working mechanism of the PCFRS were established.Finally,the shifting simulation results with PCFRS and ILRS based on the same operating conditions were compared and analyzed.The research shows that the PCFRS can meet the main shifting evaluation index of an AMT without complex control methods,as well as it takes only 0.2406 s to finish the comfortable and zero-speed-difference shifting.The shifting quality of PCFRS is better than that of the ILRS.It lays a foundation for using the new synchronizer as a part of clutchless AMTs equipped in pure electric vehicles.

OPTIMAL TORQUE CONTROL STRATEGY FOR PARALLEL HYBRID ELECTRIC VEHICLE WITH AUTOMATIC MECHANICAL TRANSMISSION

In parallel hybrid electrical vehicle （PHEV） equipped with automatic mechanical transmission （AMT）, the driving smoothness and the clutch abrasion are the primary considerations for powertrain control during gearshift and clutch operation. To improve these performance indexes of PHEV, a coordinated control system is proposed through the analyzing of HEV powertrain dynamic characteristics. Using the method of minimum principle, the input torque of transmission is optimized to improve the driving smoothness of vehicle. Using the methods of fuzzy logic and fuzzy-PID, the engaging speed of clutch and the throttle opening of engine are manipulated to ensure the smoothness of clutch engagement and reduce the abrasion of clutch friction plates. The motor provides the difference between the required input torque of transmission and the torque transmitted through clutch plates. Results of simulation and experiments show that the proposed control strategy performs better than the contrastive control system, the smoothness of driving and the abrasion of clutch can be improved simultaneously.

Methods for the Gear-Position Decision in AMT

Aimed at defects of the gear position decision in an automatic mechanical transmission, a method of synthetic shift schedule of 5 speed gear position is presented, which is based on the fuzzy discernment of the driver intention and the road characteristics. A contrastive experimental analysis between the synthetic gear position decision method and the traditional gear position decision method is given by analyzing Santana 2000.

AMT-Fault-Diagnosis Device Based on ISO 15765

To debug automatic mechanical transmission（AMT） more quickly and accurately,an AMT-fault-diagnosis device is designed based on the ISO 15765 protocol,which adopts the flow control mechanism and has off-line diagnostics function.Requirements for the device are analyzed and diagnostic trouble code（DTC） is defined.Electrically controlled hardware with graphics display function and fault diagnostic software flowchart are designed based on the electronic control hydraulic AMT system.Bench and vehicle driving tests showethat the AMT-fault-diagnosis device can read and delete the fault message successfully with a stable performance.

Development of AMT Fault Diagnosis Technique Based on KWP2000

In order to make automatic mechanical transmission （AMT） capable of performing fault self-diagnoses and adaptive to standard communication interface,through technical analysis and intensive study concerning on-board diagnostic protocols now widely applied in Europe and America,KWP2000 on CAN is accepted as a technological path.An AMT fault communication system using hardware-in-the-loop simulation by dSPACE is developed,and communications compatible with ISO 15031-6 is realized on this module.Moreover,a hand-held fault diagnosis instrument with built-in software is designed to facilitate communications with AMT fault communication module with accuracy,rapidity and stableness.Bench and real vehicle experimental results show that the developed instrument and module can perform the anticipated functions,so as to maintain steady communications under the KWP2000-on-CAN protocol.