STUDY ON SHIFT SCHEDULE OF AUTOMATIC TRANSMISSION TO IMPROVE ENGINEERING VEHICULAR EFFICIENCY

New shift schedule for automatic transmission is proposed from the point ofview of saving energy. The bench-test of automatic shift adopting this shift schedule is done onautomatic transmission's test-bed. The experimental results show the shift schedule is correct. Thisshift schedule has enriched the theory of vehicle automatic maneuvering and will improve theefficiency of hydrodynamic drive system of the vehicle.

Optimal tracking control for automatic transmission shift process

In order to improve the shift quality, a linear quadratic optimal tracking control algorithm for automatic transmission shift process is proposed. The dynamic equations of the shift process are derived using a Lagrange method. And a powertrain model is built in the Matlab/Simulink and veri- fied by the measurements. Considering the shift jerk and friction loss during the shift process, the tracking trajectories of the turbine speed and output shaft speed are defined. Furthermore, the linear quadratic optimal tracking control performance index is proposed. Based on the Pontryagin＇ s mini- mum principle, the optimal control law of the shift process is presented. Finally, the simulation study of the 1 - 2 upshift process under different load conditions is carried out with the powertrain model. The simulation results demonstrate that the shift jerk and friction loss can be significantly re- duced by applying the proposed optimal tracking control method.

FOUR-PARAMETER AUTOMATIC TRANSMISSION TECHNOLOGY FOR CONSTRUCTION VEHICLE BASED ON ELMAN RECURSIVE NEURAL NETWORK

From the viewpoint of energy saving and improving transmission efficiency, the ZL50E wheel loader is taken as the study object. And the system model is analyzed based on the transmission system of the construction vehicle. A new four-parameter shift schedule is presented, which can keep the torque converter working in the high efficiency area. The control algorithm based on the Elman recursive neural network is applied, and four-parameter control system is developed which is based on industrial computer. The system is used to collect data accurately and control 4D180 power-shift gearbox of ZL50E wheel loader shift timely. An experiment is done on automatic transmission test-bed, and the result indicates that the control system could reliably and safely work and improve the efficiency of hydraulic torque converter. Four-parameter shift strategy that takes into account the power consuming of the working pump has important operating significance and reflects the actual working status of construction vehicle.

Desktop calibration of automatic transmission for passenger vehicle

Desktop calibration of automatic transmission(AT) is a method which can reduce cost, enhance efficiency and shorten the development periods of a vehicle effectively. We primary introduced the principle and approach of desktop calibration of AT based on the condition of coupling characteristics between engine and torque converter and obtained right point exactly. It is shown to agree with experimental measurements reasonably well. It was used in different applications abroad based on AT technology and achieved a good performance of the vehicle compared with traditional AT technology which primary focuses on the drivability, performance and fuel consumption.

STUDY ON SHIFT SCHEDULE AND SIMULATION OF AUTOMATIC TRANSMISSION

From the point of view of saving energy, a new shift schedule and auto-controlling strategy for automatic transmission are proposed. In order to verify this shift schedule, a simulation program using a software package of Matlab/ Simulink is developed. The simulation results show the shift schedule is correct. This shift schedule has enriched the theory of vehicle automatic maneuvering and will improve the efficiency of hydrodynanic drive system of the vehicle.

Dynamic Engaging Characteristics of Wet Clutch in Automatic Transmission

Wet clutch is an important shifting component in automatic transmission,and its properties will affect the gear shift performance. By comparing the calculated and test results,the static friction torque model was proved to be capable of describing the real pressure and torque only in the situation of high-energy engagement.Therefore,a dynamic torque model was proposed on basis of hydrodynamic properties between friction surfaces, in which the clutch engagement was divided into three phases for hydrodynamic lubrication, mixed lubrication, and mechanical contact. The proposed dynamic torque model was validated by comparing the calculated and test results. The effects of temperature,pressure,and pressure changing rate of automatic transmission fluid( ATF) on the clutch torque were analyzed. Based on these results,the clutchto-clutch torque control during shifting in automatic transmission was optimized,and as a result,the shifting comfort was significantly improved since the problems such as the fluctuation and sudden drop of the engine rotating speed during shifting were eliminated.

Configuration Synthesis and Performance Analysis of 9‑Speed Automatic Transmissions

Current research of automatic transmission(AT)mainly focuses on the improvement of driving performance,and configuration innovation is one of the main research directions.However,finding new configurations of ATs is one of the main limitations of configuration innovation.In the present study,epicyclic gear trains(EGTs)are applied to investigate mechanisms of 9-speed ATs.Then four kinematic configurations are proposed for automatic transitions.In order to evaluate the performance of proposed mechanisms,the lever analogy method is applied to conduct kinematic and mechanical analyses.The power flow analysis is conducted,and then transmission efficiencies are calculated based on the torque method.The comparative analysis between the proposed and existing mechanisms is carried out where obtained results show that proposed mechanisms have reasonable performance and can be used in ATs.The prototype of an AT is manufactured and the speed test is conducted,which proves the accuracy of analysis and the feasibility of proposed mechanisms.

Analysis on the gear-shifting schedule of hydraulic automatic transmission

With an advanced foreign hydraulic automatic transmission as the objective,an analytical method for the gear-shifting schedule is proposed.First the demanded maximum gradient of test is estimated.Then a test scheme and analytical procedure is formulated by initial test and hypothetical shift parameters.Finally through gear-shifting tests under different road conditions,load,accelerator pedal position limitation,throttle opening and output shaft speed are found to be the gear-shifting parameters.Under a common road condition,the gear-shifting schedule is a double-parameter schedule.Based on the driver＇s demands on braking and dynamic performance,different shift schedules are made under downhill,uphill and quick releasing acceleration pedal conditions.The operation criteria of down-shift schedule on abrupt grade are proposed.

Influence of oxidation of automatic transmission fluids (ATFs) and sliding distance on friction coefficients of a wet clutch in the running-in stage

In this paper,the influence of oxidation of automatic transmission fluids(ATFs)and sliding distance on the friction coefficients of a wet clutch in approached running-in conditions was investigated.The ATFs were oxidized by a laboratory process approaching oxidation occurred in actual ATFs.Oxidation was evaluated by means of increase in carbonyl compounds and depletion of zinc dialkyldithiophosphates(ZDDPs)additives.Also,the changes in kinematic viscosity and viscosity index were evaluated.Pin-ondisk tests were conducted to replicate the actual sliding contact in a wet clutch.The pin specimens were cut from friction material composite plates and the disks were actual steel separators both from an automotive wet clutch.Friction coefficient, μ,was measured at progressive sliding velocity,ν,to obtain μ–νcurves at 26 and 100°C.Three μ–νtests were consecutively run using the same pair of specimens and oil.The cumulative sliding distance for each μ–νtest generated surface flattening using the oils.The friction coefficients of the wet clutch increased due to the ATFs oxidation meanwhile the dm/dv values decreased in most cases.It suggests that ATF oxidation can enhance torque capacity of the wet clutch,but it could reduce anti-shudder property.Progressive sliding distance improved the slopes in the μ–νresults using fresh ATFs meanwhile it generated a slope decrease by using aged ATFs.

Adaptive Clutch Engaging Process Control for Automatic Mechanical Transmission

Based on detail analysis of clutch engaging process control targets and adaptive demands, a control strategy which is based on speed signal, different from that of based on main clutch displacement signal, is put forward. It considers both jerk and slipping work which are the most commonly used quality evaluating indexes of vehicle starting phase. The adaptive control system and its reference model are discussed profoundly. Taking the adaptability to different starting gears and different road conditions as examples, some proving field test records are shown to illustrate the main clutch adaptive control strategy at starting phase. Proving field test gives acceptable results.

OPTIMAL TORQUE CONTROL STRATEGY FOR PARALLEL HYBRID ELECTRIC VEHICLE WITH AUTOMATIC MECHANICAL TRANSMISSION

In parallel hybrid electrical vehicle （PHEV） equipped with automatic mechanical transmission （AMT）, the driving smoothness and the clutch abrasion are the primary considerations for powertrain control during gearshift and clutch operation. To improve these performance indexes of PHEV, a coordinated control system is proposed through the analyzing of HEV powertrain dynamic characteristics. Using the method of minimum principle, the input torque of transmission is optimized to improve the driving smoothness of vehicle. Using the methods of fuzzy logic and fuzzy-PID, the engaging speed of clutch and the throttle opening of engine are manipulated to ensure the smoothness of clutch engagement and reduce the abrasion of clutch friction plates. The motor provides the difference between the required input torque of transmission and the torque transmitted through clutch plates. Results of simulation and experiments show that the proposed control strategy performs better than the contrastive control system, the smoothness of driving and the abrasion of clutch can be improved simultaneously.

Defect Analysis and Innovation Design of Synchronizer for Clutchless Automatic Mechanical Transmission

The synchronizer is a key component of automatic mechanical transmission(AMT)equipped in electric vehicles,but the inertial lock-ring synchronizer(ILRS)commonly used there is not suitable especially for pure electric vehicles without a clutch because of big shift impact.To make the shifting process rapid and smooth,a new synchronizer named pressure-controllable friction ring synchronizer(PCFRS)was designed.Initially,the inevitable shortcoming of ILRS was verified by simulation and test.Furthermore,the mechanical characteristics and advantages of the new synchronizer over ILRS were analyzed.Then,the formulations describing the dynamic transmission based on the working mechanism of the PCFRS were established.Finally,the shifting simulation results with PCFRS and ILRS based on the same operating conditions were compared and analyzed.The research shows that the PCFRS can meet the main shifting evaluation index of an AMT without complex control methods,as well as it takes only 0.2406 s to finish the comfortable and zero-speed-difference shifting.The shifting quality of PCFRS is better than that of the ILRS.It lays a foundation for using the new synchronizer as a part of clutchless AMTs equipped in pure electric vehicles.

Development of calibration system for transmission control unit of AT based on XCP

To guarantee control system＇s performance and shorten the development cycle during the development process of hydraulic automatic transmission, a calibration system on CAN for high-pow- er AT ECU is designed based on XCP. In this system, it is possible that the master dynamically searching the slaves available on bus and data synchronization between master and slave is also achieved. Real-time measurement and on-line calibration can be executed during the running process of transmission control unit, so the calibration result is displayed in time. Calibration by true value and physical value are both available. Experimental results showed that this system operated stably and reliably and had strong timeout handling ability.

GEAR POSITION DECISION METHOD OF AUTOMATED MECHANICAL TRANSMISSION BASED ON FUZZY INFERENCE

A gear position decision method used in automated mechanical transmission is introduced. The algorithm of the mechod is composed of a driving environment and driver's intention estimator, the shift schedules suit for each typical driving environment and driver's intention situation, and an inference ligic to determine the most proper gear position for the present situation. The estimator identifies the driving environment and driver's intention features which are divided into some typical models. Based on the identified results, the algorithm works out the best gear position. It just simulates the course of driver's making gear position decision when driving a automobile with manual transmission. The test results show that the automated mechanical transmission with the method gives less unnecessary shifting and more proper gear position than common shift schedules.

STRATEGIES FOR SOLVING KEY PROBLEMS IN RESEARCH AND DEVELOPMENT OF AUTOMOTIVE CONTINUOUSLY VARIABLE TRANSMISSION

Several key problems in the research and development of continuously variable transmission for automobile, such as those connected to the transmitting frictional pair and the related automatic tight pressing actuator, the transmission ratio control logic and the related automatic control system, are discussed. The strategies taken for solving these key problems are described.

VEHICLE SIMULATION MODEL FOR DEVELOPING AN INTELLIGENT SLOPE SHIFT STRATEGY

With the rapid development of electronics and the growing demand for highervehicle performance, intelligent shift technology is becoming increasingly important, and itpromises to be a developing trend in vehicle automatic transmissions, A new simulation model ispresented, which includes engine, powertrain, tire and vehicle dynamics models. Based on the model,simulation experiments are conducted to investigate the slope shift strategy. The data andconclusions obtained from the simulations are valuable contributions to the development of anintelligent slope shift strategy.

New PAMA Technology Helps Tackle the New Challenges of China Automotive Sector

Polyalkylmethacrylate (PAMA) based viscosity index improver (VII) and pour point depressant (PPD), with the versatile chemistry and unique performance characteristics, are widely used in advanced formulations, enabling fluids to meet rheological requirement of modern specifications. This paper will be dedicated to the application of PAMA in helping China automotive lubricant formulators tackle the challenges of improving fuel economics from using lower viscosity fluids, of better protection strengthten in transmission performance and meeting new global specifications for low temperature performance.

Methods for the Gear-Position Decision in AMT

Aimed at defects of the gear position decision in an automatic mechanical transmission, a method of synthetic shift schedule of 5 speed gear position is presented, which is based on the fuzzy discernment of the driver intention and the road characteristics. A contrastive experimental analysis between the synthetic gear position decision method and the traditional gear position decision method is given by analyzing Santana 2000.

AMT-Fault-Diagnosis Device Based on ISO 15765

To debug automatic mechanical transmission（AMT） more quickly and accurately,an AMT-fault-diagnosis device is designed based on the ISO 15765 protocol,which adopts the flow control mechanism and has off-line diagnostics function.Requirements for the device are analyzed and diagnostic trouble code（DTC） is defined.Electrically controlled hardware with graphics display function and fault diagnostic software flowchart are designed based on the electronic control hydraulic AMT system.Bench and vehicle driving tests showethat the AMT-fault-diagnosis device can read and delete the fault message successfully with a stable performance.

Development of AMT Fault Diagnosis Technique Based on KWP2000

In order to make automatic mechanical transmission （AMT） capable of performing fault self-diagnoses and adaptive to standard communication interface,through technical analysis and intensive study concerning on-board diagnostic protocols now widely applied in Europe and America,KWP2000 on CAN is accepted as a technological path.An AMT fault communication system using hardware-in-the-loop simulation by dSPACE is developed,and communications compatible with ISO 15031-6 is realized on this module.Moreover,a hand-held fault diagnosis instrument with built-in software is designed to facilitate communications with AMT fault communication module with accuracy,rapidity and stableness.Bench and real vehicle experimental results show that the developed instrument and module can perform the anticipated functions,so as to maintain steady communications under the KWP2000-on-CAN protocol.