Research on technology of automatic welding machine and procedure for pile pipes of offshore jacket platform

Because of the high requirement of quality,vile working environment and great difficulty of automatic welding,MMAW is usually adopted for the welding of the platform jacket and the pile pipe.Its low efficiency and hard working is one of the choke points for construction progress. In this article,an up-to-date technology for platform pile pipe welding was introduced. Cored with FCW-S and combined with the characters and requirements of platform construction,the special automatic horizontal welding equipment and process were developed. Further more,the offshore application were introduced too.

Microstructures and Plane Energy Spectra of X80 Pipeline Steel Welded Joints by Submerged Arc Automatic Welding

X80 pipeline steel was welded with submerged arc automatic welding, the microstructures, cavity sizes, fusion depths and plane scanning of chemical elements in the welded zone, fusion zone, heat affected zone and base steel were observed with OM（optical microscope） and SEM（scanning electron microscope）, respectively. The experimental results show that there is main acicular ferrite in the base steel and welded zone, the microscopic structure of fusion zone is a blocked bainite, and the heat affected zone is composed of multilateral ferrite and pearlite. M-A unit of the welded zone is the main factor to strengthen the welded zone, composed of acicular ferrites. The percentage of cavities in the welded joint is less than that in the base steel, which is beneficial to increasing its mechanical performance and corrosion resistance. The fusion depth in the fusion zone and welded zone is 101.13 μm and 115.85 μm, respectively, and the distribution of chemical elements in the welded zone is uniform, no enrichment phenomena.

Research on key control technologies of all-position automatic welding machine

The pipeline all-position automatic welding machine system is a special welding system for automatically welding circumferential joint of pipeline on site, which has been widely used to the long-distance pipeline construction projects due to the advantages of automatic control for welding parameters at all-position, moving speed of bugs and operating. In this paper, the key control technologies of PAWM all-position automatic welding machine （ developed by Pipeline Research Institute of CNPC） such us the automatic control system, control software, personal digital assistant （PDA） software and complex programmable logic device （ CPLD ） program as well us the control method of welding parameter have been described detailedly. With the higher welding quality, higher welding effwiency and lower labor intensity, PA WM all-position automatic welding machine has been successfully applied in many famous pipeline construction projects.

The Application of Automatic Welding in Mechanical Welding

With the development of science and technology, automation technology has begun to be applied to various fields. Automatic welding technology is increasingly used in the welding industry in the area. The introduction of automatic welding technology not only improve the quality and production efficiency, but also reduce production costs, the production environment in which the staff has also been improved. This paper discusses the current situation of automatic welding technology, mechanical industry, the demand for automatic welding, automatic welding technology advantages and development trends.

Study on full automatic arc welding machine for spherical tank

A full automatic welding machine for spherical tanks' all position multi layer welds has been developed. This machine is mainly composed of a two dimension seam tracking system based on microcomputer's memory and a welding tractor as well as rail. The main features of the machine are: while welding the first layer of a seam, its microcomputer system can analyze and store the tracing information from a two dimension sensor, and control the welding head device to realize two dimension real time tracing; while welding the second layer up to the top layer of the seam, it can realize two dimension tracing based on the memorial data, automatically determine the layer number and continually sway the welding head. The welding test shows that the machine has good tracing and welding behavior, and is suitable for spherical tank's all position multi layer welds.

Automatic girth welding and performance evaluation of the joints of hot-induction-bend and line pipes with different wall thickness

During the process of laying long-distance oil and gas transmission pipelines, the hot-induction-bend method is extensively used when the direction has to be changed. By considering the pipeline＇ s ongoing processing and loading states during service, the pipeline that is generally used exhibits thicker walls than those that are observed in the line pipe. As such, during pipeline construction, hot-induction-bend and line pipes with different wall thickness are girth-welded. The chemical composition of hot-induction-bend and line pipes differs, with the carbon content being particularly higher in the hot-induction-bend pipe;it also depicts a higher carbon equivalent, which makes it possible to modify the girth of the pipe. In this study, using Baosteel＇ s standard X70M UOE hot- induction-bend and line pipes, solid-wire automatic gas-metal-arc girth welding was performed and the performance of the girth-welded joint was evaluated. Furthermore,the weldability of the pipeline girth and the microstructure of the girth-welded joint were analyzed. The results reveal that Baosteel＇ s standard UOE hot-induction-bend and line pipes exhibit good girth weldability, and their technical quality can be guaranteed in case of consumer field- construction applications.

An automatic arc welding machine for saddle joint seams on large diameter cylinders

This paper deals with the structure, components, characteristics and work principle of a newly developed automatic arc welding machine for saddle joint seams on large diameter cylinders. The equations for designing the geometry and dimensions of the cam controlling the moving locus of the welding torch have been derived. This welding machine has successfully been used in automatic welding saddle joint seams on boiler drums with good results and low cost.

A computer control system for automatic TIG welding of aluminium alloy sheets

Aimed at the welding ttechnological requirements of foe missile shell,a computer control system for automatic TIG welding of aluminium alloy sheets has been developed in this paper.The hardware of the system is composed of the four sub-systems,i.e.weldingpower source,arc length controller,welding wire feeder and welding head traveller.The software of the system comprises the on-line executing program and the off-line serving program.The operating principle,specifications and control of the system are introduced.The experiments indicate that the system possesses rational hardware structure and practical software function,and has solved the problem of high frequency interference to the computer control system. Therefore,the control system can satisfy the requirements of automatic TIG welding of the missile shell.

FLEXIBLE MAGNETIC WHEEL TYPE INTELLIGENT WELDING ROBOT FOR SPHERICAL TANK

An intelligent welding robot for spherical tank's all-position multi-layerwelds is developed. Based on the dynamics analyzing and simulation testing, a flexible magneticwheel mechanism is created as the robot's walking carriage. It makes the robot directly attracted tothe surface of the spherical tank so as to realize the all-position walking and welding withoutrail. At the same time, a CCD real-time tracing system is developed for the robot to repeatedlytrace the all-position and multi-layer seams. The welding tests show that the welding robot can makethe all-position and multi-layer welds with high tracing accuracy, excellent quality and reliablebehavior, and it can be applied for practical production.

The Investigation on Welding Processes for SUS316LN Tubes Used in Superconducting Magnetic System of EAST

The force flow cooled superconducting cable-in-conduit conductor （CICC） is used in both of EAST toroidal field （TF） and poloidal field （PF） coils. The conductor consists of multi-stage NbTi superconducting cable and 1.5 mm thick square jacket. The cable is pulled through in a thin wall circular jacket and then compacted to square cross-section conductor. The jacket material is SUS316LN austenitic stainless steel seamless tubes （about 10 m each）, which is assembled by butt-welding up to 600 m. The results of the welding procedure investigation and quality assurance procedures carrying out are described in this paper.

Evaluation of automatic girth weldability of pipeline in special conditions

To meet the requirements of pipeline consumers abroad,in this study,an automatic gas metal arc welding type of girth welding was performed with a heat input of no more than 0.25 kJ/mm and high-strength solid-wire matching for an X70M large-diameter UOE pipeline.An integral evaluation of the X70M pipeline girth weldability was performed with respect to the girth-weld cold-cracking sensitivity during the welding process and the strengthening,hardening,and embrittlement of the girth weld joint after girth welding in especially rigorous welding conditions with accelerated failure characteristics.The performance of the above girth weld joint with joints welded using the main construction-field girth welding procedure was compared to ensure the good girth weldability of the X70M pipeline.The results of this study have important supervisory significance for field-construction girth welding.Finally,the girth weldability of the X70M pipeline was found to satisfy the field construction requirements even when the welding conditions are especially rigorous.

Research and engineering application of the arc welding pulsed controller technology

The tenacity of heat-affected zone （HAZ） will decline and the size of grains will increase, because of the overheating on HAZ when submerged are welding （SAW） is ased to thick plate with high heat input. The shaping will worsen when SAW is used to thin plate with high current at high speed. A new SAW technology, the pulsed direct current （DC） automatic SAW, will be put forward in this paper in order to overcome the above shortcomings. And a pulsed controller with micro-controller unit （MCU） as the core, nixie tube （NT） and keyboard as the man-machine conversation interface is developed. The main functions of the pulsed controller include the output of pulsed welding current and the working with twinwire. The research has widely prospects in application with significant meanings in theory and practical engineering.