Evolutionary analysis of green credit and automobile enterprises under the mechanism of dynamic reward and punishment based on government regulation

To explore the green development of automobile enterprises and promote the achievement of the“dual carbon”target,based on the bounded rationality assumptions,this study constructed a tripartite evolutionary game model of gov-ernment,commercial banks,and automobile enterprises;introduced a dynamic reward and punishment mechanism;and analyzed the development process of the three parties’strategic behavior under the static and dynamic reward and punish-ment mechanism.Vensim PLE was used for numerical simulation analysis.Our results indicate that the system could not reach a stable state under the static reward and punishment mechanism.A dynamic reward and punishment mechanism can effectively improve the system stability and better fit real situations.Under the dynamic reward and punishment mechan-ism,an increase in the initial probabilities of the three parties can promote the system stability,and the government can im-plement effective supervision by adjusting the upper limit of the reward and punishment intensity.Finally,the implementa-tion of green credit by commercial banks plays a significant role in promoting the green development of automobile enter-prises.

Impacts of Using Al_(2)O_(3)Nano Particle to Compressor Oil on Performance of Automobile Air Conditioning System

This work involves an experimental study on the performance of automobile air-conditioning systems by adding Al_(2)O_(3)nanoparticles to oil compressors to investigate their impacts on the enhancement of the speed cooling of refrigeration systems and to compare it with the system operated using only oil.The Al_(2)O_(3)nanoparticles have been added to the oil compressor for different ranges ofmass concentration(Ф=0.1%,Ф=0.15%andФ=0.2%).The stability of Al_(2)O_(3)nanoparticles has been tested by direct observation for different time periods.The results indicated that the air conditioning systemthat operated by using Al_(2)O_(3)-oil was better than the system that operated with pure oil.ForФ=0.2%,the results indicated that the cooling speed and the efficiency of the system operated with Al_(2)O_(3)-oil are increased by 13%and 18%,respectively,as compared to the pure oil system.This study shows that the thermos-physical properties of refrigerant oil are enhanced by 15%whenФis increased.

World Automobile Standards and Innovation Conference held in Shenzhen

The 2024 World Automobile Standards and Innovation Conference(WASIC) convened on October22-24 in Pingshan district,Shenzhen city,South China's Guangdong province.The conference was themed "Leading with greenness,low carbon,digitalization,and intelligence,standards empowering sustainable development of the automobile industry".It focused on the hot issues of the automobile industry at home and abroad,gathering representatives of international standards organizations from 20countries and regions around the world.

German Automobile Expert:Cooperation Instead of Tariffs

“Europe has missed this development opportunity because we are short of a long-term vision.”MORE than 40 exhibitors from 15 major vehicle brands around the world,representing the latest cutting-edge technologies and models,gathered at the seventh China International Import Expo(CIIE),which was held in Shanghai from November 5 to 10.

Research on the Dual-Creation Talent Training Model of New Energy Automobile Based on Virtual Simulation

At present,as China vigorously develops new energy automobiles,the social demand for related talents has increased significantly,so the relevant institutions need to optimize and adjust the talent training mode to help the development of new energy automobiles.This paper summarizes the existing problems of China’s new energy automobile talent training mode,and analyzes the significance of the virtual simulation-based dual-creation talent training mode of new energy automobile and its specific implementation strategies,in order to provide references for the relevant personnel.

Automobile Transportation Logistics Supply Chain Management Strategy

To enhance the management level and quality of the automobile transportation logistics supply chain and promote innovation and development in automobile transportation logistics enterprises,it is essential to strengthen the construction of the automobile transportation logistics supply chain management model.This can be achieved through the gradual improvement of the automobile transportation logistics management process,ensuring that the management of the automobile transportation logistics supply chain proceeds in an orderly manner.The aim is to improve automobile transportation and logistics service levels while meeting the changing market supply needs.This will enable automobile transportation and logistics enterprises to maintain steady economic benefits and enhance their core competitiveness in the market.Therefore,this paper has conducted a comprehensive exploration and research on managing the automobile transportation logistics supply chain.Corresponding management strategies are proposed as a starting point to achieve the aforementioned goals.

Separation of Pd and Pt from highly acidic leach liquor of spent automobile catalysts with monothio-Cyanex 272 and trioctylamine

Platinum group metals(PGMs),especially Pd,Pt,and Rh,have drawn great attention due to their unique features.Direct separation of Pd and Pt from highly acidic automobile catalyst leach liquors is disturbed by various factors.This work investigates the effect of various parameters including the acidity,extractant concentration,phase ratio A/O,and diluents on the Pd and Pt extraction and their stripping behaviors.The results show that the Pd and Pt are successfully separated from simulated leach liquor of spent automobile catalysts with monothioCyanex 272 and trioctylamine(TOA).Monothio-Cyanex 272 shows strong extractability and specific selectivity for Pd,and only one single stage is needed to recover more than 99.9% of Pd,leaving behind all the Pt,Rh,and base metals of Fe,Mg,Ce,Ni,Cu,and Co in the raffinate.The loaded Pd is efficiently stripped by acidic thiourea solutions.TOA shows strong extractability for Pt and Fe at acidity of 6 mol·L^(–1) HCl.More than 99.9% of Pt and all of the Fe are extracted into the organic phase after two stages of countercurrent extraction.Diluted HCl easily scrubs the loaded base metals(Fe,Cu,and Co).The loaded Pt is efficiently stripped by 1.0 mol·L^(–1) thiourea and 0.05–0.1 mol·L^(–1) Na OH solutions.Monothio-Cyanex 272 and TOA can realize the separation of Pd and Pt from highly acidic leach liquor of spent automobile catalysts.

Trip Purposes of Automobile Users Inference Using Multi-day Traffic Monitoring Data

Determining trip purpose is an important link to explore travel rules. In this paper,we takea utomobile users in urban areas as the research object,combine unsupervised learning and supervised learningm ethods to analyze their travel characteristics,and focus on the classification and prediction of automobileu sers’trip purposes. However,previous studies on trip purposes mainly focused on questionnaires and GPSd ata,which cannot well reflect the characteristics of automobile travel. In order to avoid the multi-dayb ehavior variability and unobservable heterogeneity of individual characteristics ignored in traditional traffic questionnaires,traffic monitoring data from the Northern District of Qingdao are used,and the K-meansc lustering method is applied to estimate the trip purposes of automobile users. Then,Adaptive Boosting(AdaBoost)and Random Forest(RF)methods are used to classify and predict trip purposes. Finally,ther esult shows:(1)the purpose of automobile users can be mainly divided into four clusters,which includeC ommuting trips,Flexible life demand travel in daytime,Evening entertainment and leisure shopping,andT axi-based trips for the first three types of purposes,respectively;(2)the Random Forest method performss ignificantly better than AdaBoost in trip purpose prediction for higher accuracy;(3)the average predictiona ccuracy of Random Forest under hyper-parameters optimization reaches96.25%,which proves the feasibilitya nd rationality of the above clustering results.

The Development of Intelligent Automobile Industry Is Constantly Updated

“Developing smart cars is not only a strategic choice,but is also a requirement for industrial and social development.Intelligence determines the outcome of the competition in the second half of the automobile revolution.The new output value of cars driven by intelligence will reach RMB 2.8 trillion by 2030,”said Zhang Yongwei,Vice Cha i rma n a nd Secretary General of China EV100,at the 2023 Globa l Intel ligent Vehicle Summit(GIV 2023).While consolidating the development advantages of new energy vehicles,he emphasized that new competitiveness must be formed through intelligence.

A Historical Approach on the Opportunity to Acquire Technology Development Capability in Turkish Automobile Industry

Turkey has given importance to the development of the automobile industry since the Ottoman period.While the Ottomans,who were aware of the development process of the automobile industry in the world,provided transportation by horse-drawn carriage,they thought of importing automobiles for the Sultan and high-level bureaucrats in an effort to switch to automobile transportation.However,after the proclamation of the Republic,automobile production started,just like airplanes.While a factory was established for the production of a domestic aircraft,the first automobile production facility was established in Istanbul in 1929 by the American Ford company.This factory was closed after a short time due to the world economic crisis.After the activities of the Kayseri Aircraft Factory,which lasted until 1948,came to an end,this time,Revolution car prototypes could be manufactured completely domestically in 1961.After the project,which did not go into mass production,the KoçGroup started to produce the domestically-made Anadol car with technology transfer from multiple sources in 1967,but the production of Anadol continued until 1984.In 1971,Renault cars started to be produced under the French Renault license,and TOFAŞcars under the Italian FIAT license.Towards the end of the 1970s,creative imitation applications were made in TOFAŞcars with the bird series.In the 1990s,the production of Japanese Honda and Toyota and South Korean Hyundai cars started.In 2011,the idea of producing a domestic automobile emerged,the Devrim automobile was taken as an example in this project,the first Togg prototype was manufactured with technology transfer from multiple sources in December 2018,and it was announced that mass production would begin in March 2023.The 12-year period from 2011 to 2023 is too long for the creation of a domestic automobile.It has been understood that this long process has been passed in order to regain the pre-1980 level of technological ability.However,the most important thing is the transition from the creative imitation stage to the innovation stage.Our wish is that this process can be shortened with phase skipping approaches.

On the Digital Transformation of the Automobile Manufacturing Industry in the Chengdu-Chongqing Economic Circle:Mechanism of Action and Feasible Paths

With a long industrial chain and a powerful ability to drive other industries,the automobile manufacturing industry has a prominent strategic position in the national economy.In recent years,many countries have put on their agenda the digitalization of the automobile manufacturing industry,leading to an connected,autonomous,shared,and electric(also known as CASE)①development trend in the industry.As one of the six major automobile industry clusters in China,the Chengdu-Chongqing economic circle has achieved initial results in the digital transformation of the automobile manufacturing industry.However,the region is still faced with some constraints,such as insufficient digital infrastructure,relatively slow development of new automobile products,insufficient innovation ability of the automobile industry,and complex digital transformation of small and medium-sized automobile enterprises(automobile SMEs).This paper intends to construct a framework for the mechanism of action of the digital transformation in the automobile manufacturing industry,analyze the effects of the digital transformation of the automobile manufacturing industry in the Chengdu-Chongqing economic circle,and propose feasible paths for the digital transformation of the automobile manufacturing industry in the region by drawing on domestic and international experience in this regard.The specific paths include:(a)Smoothing the“dual-core”data chain to facilitate the digital transformation of the automobile manufacturing industry;(b)Developing the new energy vehicle(NEV)industry to upgrade the quality of automobile products;(c)Achieving corner overtaking in the digital transformation of the automobile manufacturing industry with digital technology;(d)Jointly building the automobile industrial park to promote the digital transformation of the industry;(e)Addressing problems facing automobile SMEs in digital transformation via targeted policy tools.

Assessment of Air Quality in Brazzaville: Measurement of Some Automobile Pollutants

Atmospheric pollution is currently a real public health problem because of its potentially harmful effects on the environment as well as on human health. Several studies conducted in America, Europe, Asia, and Africa have established a significant link between air pollution and cancer, infertility, cardiovascular and respiratory morbidity, and mortality. This study aims to measure some automotive pollutants (CO, CO2, NO2, and SO2) by a selective and colorimetric method using a measurement system on Dräger reagent tubes coupled to a Dräger Accuro sampling pump in order to do a quantitative assessment of air quality in the nine districts of Brazzaville. The results obtained during this study revealed high concentration levels of pollutants (CO, CO2, NO2, SO2), all above the standards recommended by the WHO. The results obtained during this study made it possible to categorise Brazzaville as a polluted city.

Automobile Pollution and Risk of Impaired Lung Function and Oxygen Saturation among Vendors Near Road Traffic in Brazzaville, Congo

Context: Automobile pollution is becoming a potential threat to the cardiorespiratory health of the urban population of sub-Saharan Africa. The present study aims to evaluate the level of concentrations of fine particles (PM2.5 and PM10) near road traffic and the effects of exposure to automobile pollutants on pulmonary function and arteriolar blood oxygen saturation among sellers around road traffic. Materials and Methods: The study recruited 48 healthy people carrying out a sales activity near road traffic. PM2.5 and PM10 measurements were taken from 6 a.m. to 6 p.m. using a Temtop Airing-1000 portable particle detector. Spirometric measurements were taken in the morning and in the evening from a portable Spirobank G spirometer. Oxygen saturation measurements were also taken in the morning and evening using a Pulse oxymeter CMS50D pulse oxymeter. Results: Mean values of forced vital capacity (FVC), forced expiratory volume in one second (FEV1), peak expiratory flow (PEF), and forced expiratory flow between 25% and 75% of forced vital capacity (FEF25 - 75) recorded in the evening were significantly lower than those obtained in the morning in the subjects of the total group and in the men. Only the mean values of PEF and FEF25 - 75 obtained in the evening were significantly lower than those recorded in the morning in women. Minimum PM2.5 values recorded near road traffic were negatively correlated with evening PEF in men, while maximum PM10 values were negatively correlated with evening PEF in women. The blood oxygen saturation recorded in the evening was significantly lower than that obtained in the morning. Conclusion: Short-term exposure to automobile pollutants has adverse effects on lung function and oxygen saturation in people carrying out a sales activity near road traffic.

Practical Analysis of Mechanical Automation Technology in Automobile Manufacturing

In today’s rapidly developing modern society,automobiles,as an important part of transportation and industrial fields,play a pivotal role.With the improvement of people’s living standards and the increase in traffic demand,the automobile manufacturing industry has been continuously developing and growing globally.However,to cope with increasingly fierce market competition and ever-changing consumer demands,the automobile manufacturing industry is also facing the challenges of improving production efficiency,reducing costs,and improving product quality.In this context,automation technology has gradually become a major trend in the automobile manufacturing industry.As an important support of modern industry,automation technology has shown great application potential in many fields.From industrial production to daily life,automation technology can be seen everywhere.In the field of manufacturing,especially in automobile manufacturing,the application of automation technology is getting more and more attention.Automated production lines,intelligent robots,and automated warehousing systems have all changed the face of automobile manufacturing to varying degrees,bringing companies higher efficiency,more stable quality,and greater competitive advantages.The application trend of this automation technology in various fields not only meets the needs of modern industry for efficient,precise,and sustainable development but also provides new ideas and paths for the future development of the automobile manufacturing industry.

Exposure to Automobile Pollutants and Sperm Quality among Mechanics in Brazzaville (Congo)

Atmospheric pollution is today at the heart of all debates because of its potentially harmful effects on the environment, the climate, and human health;it currently constitutes a real public health problem. However, the increase in infertility around the world has led scientists to look for a link between air pollution and fertility. This study consisted of evaluating the short-term influence of automobile pollution on the semen parameters of mechanics in Brazzaville. A cross-sectional, analytical, prospective study between two groups (G1, exposed people and G2, unexposed people) was carried out in Brazzaville on 228 patients, i.e., G1 with 76 subjects and G2 with 152 subjects, between June 2020 and September 2022, a period of 27 months, in order to evaluate, on the one hand, the quality of sperm in men exposed to automobile pollution according to WHO recommendations and, on the other hand, the quality of the air by a colorimetric method, punctual on a Dräger tube coupled with a Dräger Accuro pump. The concentrations of automotive pollutants measured (CO, CO2, NO2, SO2) during this study were all above the 2021 air quality standards required by WHO. These results made it possible to establish a statistically significant link between air pollution and abnormal spermogram parameters, notably mobility, count, and morphology for the spermocytogram. Exposures to automobile pollutants can influence sperm quality, which is consistent with the results of our study. We observed an alteration in the morphology, mobility, and concentration of spermatozoa.

China's automobile manufacturing sector logs steady growth in H1

China's automobile manufacturing industry registered steady expansion in terms of production,revenue,and profit in the first half of this year(H1),industry data shows.

Near net shape casting process for producing high strength 6xxx aluminum alloy automobile suspension parts

The automobile suspension parts of a high strength 6xxx aluminum alloy were produced using a novel technique known as near net shape casting for forging stock preparation. Based on the outline dimension of the forging stock, the shape of the ingot was designed as the near net shape and its casting process was studied by the numerical simulation and experimental investigation. The results show that the shrinkage of the ingot was highly correlated to its shape parameters and could be successfully forecast by the stimulation model. The casting parameters of the near net shape ingot were optimized and the near net shape 6xxx aluminum alloy ingots free of defects were cast in the laboratory. In order to obtain high performance forged suspension parts, the hot compression tests of the ingot were carried out. The results show that the subgrain fraction of the forged ingot was strongly affected by Zener-Hollomon parameters （Z parameters）. The intermediate Z parameters, 1.09×10^16 s^-1, will contribute to the larger number fraction of subgrains inside the forged ingot, which contributes to the high performance of the forged products.

Sheet Metal Forming Simulation and Its Application in Stamping Process of Automobile Panels

The paper starts with a brief overview to the necessity of sheet metal forming simulation and the complexity of automobile panel forming, then leads to finite element analysis (FEA) which is a powerful simulation tool for analyzing complex three-dimensional sheet metal forming problems. The theory and features of the dynamic explicit finite element methods are introduced and the available various commercial finite element method codes used for sheet metal forming simulation in the world are discussed,and the civil and international status quo of automobile panel simulation as well. The front door outer panel of one certain new automobile is regarded as one example that the dynamic explicit FEM code Dynaform is used for the simulation of the front door outer panel forming process. Process defects such as ruptures are predicted. The improving methods can be given according to the simulation results. Foreground of sheet metal forming simulation is outlined.

Computer Network Control System in Automatic Automobile Detection

An automobile test controlling and managing system with computer network is introduced. The architecture of the local network, hardware structure, software structure, design of the test process, and error tolerating redundant design in work position substituting are presented. At last, the pivotal questions solved are discussed. With an advanced structure, this system is multi functional and flexible. Furthermore, advanced computer technology is adopted to improve its technical degree.

Automatic Control of Automobile Transmission Performance Test Stand

To realize automatic control of automobile transmission performance test stand Methods The automatic control technique of the lubricant temperature,the program- controll- edautomaticshifting of the transmission,the continuous adjusting of revolution speed and load, data-acquisition and data real-time processing were adopted.Results The lubricant temperature was controlled at the set temperature ±2℃.The automatic shifting of the trans- mission is simple,reliable and accurate.The automatic adjusting of load and rotation speed is rapidandaccurate,the torque divergence is ±1N·m,the rotation speed divergence is ±5r/min Conclusion The four kinds of techniques are applied into the automobile transmission perfor- mance test stand successfully. mancetest stand successfully.