Estimation of Average Relationship Coefficient in Animal Population

It is not reasonable to estimate the average relationship degree in statistics by using the mean of relationship coefficients between the individuals in a animal population.According to different usage of relationship coefficient,the estimation method of average relationship coefficient in animal population was disscussed by using Z transformation or CSC transformation,respectively,when relationship coefficient shows relationship degree or probability.

Variation of diffuse attenuation coefficient of downwelling irradiance in the Arctic Ocean

The diffuse attenuation coefficient （Kd） for downwelling irradiance is calculated from solar irradiance data measured in the Arctic Ocean during 3rd and 4th Chinese National Arctic Research Expedition （CHINARE）, including 18 stations and nine stations selected for irradiance profiles in seawater respectively. In this study, the variation of attenuation coefficient in the Arctic Ocean was studied, and the following results were obtained. First, the relationship between attenuation coefficient and chlorophyll concentration in the Arctic Ocean has the form of a power function. The best fit is at 443 nm, and its determination coefficient is more than 0.7. With increasing wavelength, the determination coefficient decreases abruptly. At 550 nm, it even reaches a value lower than 0.2. However, the exponent fitted is only half of that adapted in low-latitude ocean because of the lower chlorophyll-specific absorption in the Arctic Ocean. The upshot was that, in the case of the same chlorophyll concentration, the attenuation caused by phytoplankton chlorophyll in the Arctic Ocean is lower than in low-latitude ocean. Second, the spectral model, which exhibits the relationship of attenuation coefficients between 490 nm and other wavelength, was built and provided a new method to estimate the attenuation coefficient at other wavelength, if the attenuation coefficient at 490 nm was known. Third, the impact factors on attenuation coefficient, including sea ice and sea water mass, were discussed. The influence of sea ice on attenuation coefficient is indirect and is determined through the control of enter- ing solar radiation. The linear relationship between averaging sea ice concentration （ASIC, from 158 Julian day to observation day） and the depth of maximum chlorophyll is fitted by a simple linear equation. In addition, the sea water mass, such as the ACW （Alaskan Coastal Water）, directly affects the amount of chlo- rophyll through taking more nutrient, and results in the higher attenuation coefficient in the layer of 30-60 m. Consequently, the spectral model of diffuse attenuation coefficient, the relationship between attenuation coefficient and chlorophyll and the linear relationship between the ASIC and the depth of maximum chlorophyll, together provide probability for simulating the process of diffuse attenuation coefficient during summer in the Arctic Ocean.

Site coefficients suitable to China site category

The basis for the NEHRP site coefficients is summarized in the paper. The comparison of site classification between China and US code provisions has been carried out. The relationship between two site classifications has been found by the analysis of wave velocity of site soil. Thus amplitude-dependent site amplification factors for China site classification has been gained by transformation from US amplification factors. Two amplification factors are specified： Fa for short periods and Fv for longer periods. On the contrast, there is only one long period factor and not a short period factor in the current China code provision.

Necessary Conditions for the Application of Moving Average Process of Order Three

Invertibility is one of the desirable properties of moving average processes. This study derives consequences of the invertibility condition on the parameters of a moving average process of order three. The study also establishes the intervals for the first three autocorrelation coefficients of the moving average process of order three for the purpose of distinguishing between the process and any other process (linear or nonlinear) with similar autocorrelation structure. For an invertible moving average process of order three, the intervals obtained are , -0.5ρ2ρ1<0.5.

EFFICIENT ESTIMATION OF FUNCTIONAL-COEFFICIENT REGRESSION MODELS WITH DIFFERENT SMOOTHING VARIABLES

In this article,a procedure for estimating the coefficient functions on the functional-coefficient regression models with different smoothing variables in different coefficient functions is defined.First step,by the local linear technique and the averaged method,the initial estimates of the coefficient functions are given.Second step,based on the initial estimates,the efficient estimates of the coefficient functions are proposed by a one-step back-fitting procedure.The efficient estimators share the same asymptotic normalities as the local linear estimators for the functional-coefficient models with a single smoothing variable in different functions.Two simulated examples show that the procedure is effective.

AVERAGE BRIGHTNESS TEMPERATURE OF ANTENNA APERTURE

This paper presented an idea for the average brightness temperature of lossless antenna aperture, gave its expression for matched and dismatched noise source. This expression showed that the average brightness temperature of antenna aperture related with three factors: the noise temperature of noise source, the reflection coefficient of noise source, and the aperture efficiency.

High Accuracy Arithmetic Average Discretization for Non-Linear Two Point Boundary Value Problems with a Source Function in Integral Form

In this article, we report the derivation of high accuracy finite difference method based on arithmetic average discretization for the solution of Un=F(x,u,u′)+∫K(x,s)ds , 0 x s < 1 subject to natural boundary conditions on a non-uniform mesh. The proposed variable mesh approximation is directly applicable to the integro-differential equation with singular coefficients. We need not require any special discretization to obtain the solution near the singular point. The convergence analysis of a difference scheme for the diffusion convection equation is briefly discussed. The presented variable mesh strategy is applicable when the internal grid points of the solution space are both even and odd in number as compared to the method discussed by authors in their previous work in which the internal grid points are strictly odd in number. The advantage of using this new variable mesh strategy is highlighted computationally.

Two-Dimensional Modeling of the NAPL Dissolution in Porous Media: Heterogeneities Effects on the Large Scale Permeabilities and Mass Exchange Coefficient

In this paper, we are interested by the dissolution of NAPL (Non-Aqueous Phase Liquid) contaminants in heterogeneous soils or aquifers. The volume averaging technique is applied to 2D systems with Darcy-scale heterogeneities. A large-scale model is derived from a Darcy-scale dissolution model in the case of small and large Damkholer numbers, i.e., for smooth or sharp dissolution fronts. The resulting models in both cases have the mathematical structure of a non-equilibrium dissolution model. It is shown how to calculate the resulting mass exchange and relative permeability terms from the Darcy-scale heterogeneities and other fluid properties. One of the important finding is that the obtained values have a very different behavior compared to the Darcy-scale usual correlations. The large scale correlations are also very different between the two limit cases. The resulting large-scale models are compared favorably to Darcy-scale direct simulations.

A correlation OPTS algorithm for reducing peak to average power ratio of FBMC-OQAM systems

A correlation overlapping partial transmit sequence(C-OPTS) algorithm is proposed to solve the issue of high complexity of overlapping partial transmit sequence(OPTS) algorithm in suppressing the peak to average power ratio(PAPR) of filter bank multicarrier-offset quadrature amplitude modulation(FBMC-OQAM) signals.The V subblocks in partial transmit sequence(PTS) are regrouped into U combinations according to the correlation coefficient p,and overlapping subblocks are allowed between adjacent groups.The search starts from the first group and sets the phase factors of the subsequent groups to 1.When the phase factors of the non-overlapping subblocks in the first group are determined,the subsequent groups are searched in turn to determine their respective phase factors.Starting from the second data block,the data overlapped with it should be taken into account when determining its optimal phase factor vector.Theoretical analysis and simulation results indicate that compared with the OPTS algorithm,the proposed algorithm can significantly reduce the computational complexity at the cost of slight deterioration of PAPR performance.Meanwhile,compared with the even-odd iterative double-layers OPTS(ID-OPTS) algorithm,it can further reduce the complexity and obtain a better PAPR suppression effect.

改进和优化黑果枸杞及其制品中花青素测定的pH示差法

建立一种基于美国官方分析化学师协会(Association of Official Analytical Chemists,AOAC)方法检测黑果枸杞及其制品中花青素含量的改进pH示差法。考察了黑果枸杞及其制品中花青素的最佳提取和检测条件,通过液相色谱-三重四级杆串联质谱法鉴别出黑果枸杞中花青素的具体化学结构,并计算出混合花青素的平均摩尔质量。通过分光光度法测得混合花青素的平均摩尔消光系数,对改进后的pH示差法进行方法学验证和花青素的含量测定。结果显示,最佳提取和检测条件如下:黑果枸杞花青素提取溶剂为盐酸-80%(体积分数)乙醇(3∶97,体积比),料液比为1∶100(g∶mL),提取温度为50℃,提取时间为30 min,缓冲溶液稀释5倍后静置平衡20 min。液相色谱-三重四级杆串联质谱法鉴别黑果枸杞中主要以矮牵牛素类花青素为主(占97.96%),黑果枸杞特有的混合花青素平均摩尔质量为912.7 g/mol,平均摩尔消光系数为29591 L/(mol·cm)。pH示差法改进后能够满足方法学验证要求,固体样品和液体样品最低检出限分别为28.2 mg/100 g、0.282 mg/100 mL。方法改进后花青素提取增长率均大于20%,静置平衡20 min后单次检测结果精密度小于0.3%。以矮牵牛素类花青素代替矢车菊素-3-O-葡萄糖苷计算花青素含量平均提高了2.41倍,能真实地反映黑果枸杞及其制品中花青素的含量。

热风加热沥青路面冲击射流共轭传热特性

为提高热风加热沥青路面的就地再生加热效果,基于热风冲击射流对流换热和沥青路面内部导热的共轭传热过程,建立了热风加热沥青路面的冲击射流共轭传热理论模型,选取有限容积法得到了共轭传热模型的通用离散方程,采用压力-速度耦合半隐式算法(semi-implicit method for pressure linked equations,SIMPLE)获得了整个求解域内温度场分布,选取平均热流密度和平均换热系数反映沥青路面加热效果,通过正交试验研究了热风出口速度和热风出口温度对路面加热效果的影响程度。仿真和试验结果表明:理论计算与实验温度场分布趋势吻合度高,两者平均误差为8.4%;平均热流密度和平均换热系数在加热初期均从最大值急剧下降,而后下降幅度逐渐减小趋于平衡,两者的仿真计算与实验结果趋势相同,平均误差分别为6.4%和7.8%;热风出口速度和热风出口温度对平均热流密度均有显著影响,热风出口速度对平均换热系数有显著影响,热风出口温度对平均换热系数的影响相较于平均热流密度指标表现为不显著。研究结果为后续沥青路面就地热再生热风加热温度控制和加热器设计提供了理论依据。

基尼系数测度贫富差距的一种改进方法

基尼系数是测度贫富差距的重要指标,但是洛伦兹曲线的构造使得基尼系数存在结构性局限,即代表着不同的贫富差距情况的两条洛伦兹曲线可能对应着同一个基尼系数,仅凭基尼系数无法反映贫富差距的结构特征。文章提出将洛伦兹曲线上切线斜率为1的点叫做平均增长点,每条洛伦兹曲线有且仅有一个平均增长点,洛伦兹曲线切线斜率具有单调性,可以通过引入平均增长点,与基尼系数共同测度贫富差距,突破单纯依靠基尼系数测度贫富差距的结构性局限。

聚丙烯纤维对刚玉-六铝酸钙浇注料抗热震性能的影响

为改善刚玉-六铝酸钙浇注料的性能,以刚玉、六铝酸钙(CA_(6))、活性α-Al_(2)O_(3)微粉为主要原料,在1550℃保温4 h,制备了水合氧化铝结合的刚玉-CA_(6)浇注料,研究了不同聚丙烯纤维加入量(外加质量分数分别为0、0.04%、0.08%、0.12%和0.16%)对刚玉-CA_(6)浇注料性能尤其是抗热震性的影响。结果表明:1)聚丙烯纤维的加入可使试样平均线膨胀系数减小,但会导致试样强度和体积密度有所降低,进而导致弹性模量减小;2)适量聚丙烯纤维的加入可改善试样抗热震性,但过量的聚丙烯纤维会导致材料内部结构疏松、致密度减小,试样抗热震性反而有所降低;3)聚丙烯纤维加入量为0.08%(w)时,常温抗折强度保持率最高,为53.5%,表现出最佳的抗热震性能。

线形布置双矩形柱的平均气动力特性试验研究

为研究线形布置双矩形柱的平均气动力特性,采用刚性模型测压风洞试验测试并分析了宽高比为1∶4的双矩形柱在不同风向角和不同间距比下的平均阻力系数和平均升力系数,并与单矩形柱的试验结果进行了对比分析。在此基础上,通过分析平均风压分布进一步揭示了线形布置双矩形柱平均气动力系数的干扰机理。风向角α的变化范围为0°~90°,间距比P/B(双矩形柱的中心距与矩形柱宽度之比)的变化范围为1.2~8.0。研究结果表明:双矩形柱的平均阻力系数可分为0°≤α≤30°和30°<α≤90°两类;上游矩形柱的平均升力系数可分为0°≤α≤75°和75°<α≤90°两类;下游矩形柱的平均升力系数可分为0°≤α≤20°和20°<α≤90°两类。平均气动力系数的放大效应主要体现在上游矩形柱,平均阻力系数最大为单矩形柱的1.5倍,平均升力系数最大为单矩形柱的2.1倍。

一类双边碰撞振动系统的随机响应研究

碰撞过程凭借瞬时冲击模型得以简化,但采用经典的Newton恢复系数模型为计算带来了误差。本研究引入修正的恢复系数模型取代经典的Newton恢复系数模型,预测了一类宽带噪声激励下双边碰撞振动系统的随机动力学响应。位移的碰撞条件借助自由振动系统被转化为能量的碰撞条件。根据系统的能量水平,系统的运动可被分为双边碰撞和无碰撞振动两类。进一步地,两类运动的平均漂移系数和扩散系数可借助能量包线随机平均法求解获得。在此基础上,建立并求解对应的Fokker-Plank-Kolmogorov (FPK)方程,进而得到系统的稳态响应。最后,将所提方法应用于Duffing振子,讨论了屈服速度、挡板间距和噪声激励对响应的影响,并用蒙特卡罗模拟验证了所述方法的有效性。

Evaluating the relative importance of predictors in Generalized Additive Models using the gam.hp R package

Generalized Additive Models(GAMs)are widely employed in ecological research,serving as a powerful tool for ecologists to explore complex nonlinear relationships between a response variable and predictors.Nevertheless,evaluating the relative importance of predictors with concurvity(analogous to collinearity)on response variables in GAMs remains a challenge.To address this challenge,we developed an R package named gam.hp.gam.hp calculates individual R^(2) values for predictors,based on the concept of'average shared variance',a method previously introduced for multiple regression and canonical analyses.Through these individual R^(2)s,which add up to the overall R^(2),researchers can evaluate the relative importance of each predictor within GAMs.We illustrate the utility of the gam.hp package by evaluating the relative importance of emission sources and meteorological factors in explaining ozone concentration variability in air quality data from London,UK.We believe that the gam.hp package will improve the interpretation of results obtained from GAMs.

基于统计分析方法对古代玻璃制品的成分探究

利用斯皮尔曼相关系数和卡方检验分析了古代玻璃的成分,得出玻璃类型、纹饰、颜色与表面风化的相关性和差异性;对风化玻璃制品数据借助中位数、平均值、标准差等指标进行对比分析,通过加权平均值预测模型,预测风化前玻璃状态,得出玻璃类型的鉴别方法。利用敏感度系数公式,得到二氧化硅含量增减10%与氧化铅含量比值,说明氧化铅和二氧化硅含量的微量改变不会对类别产生影响。借助相关性分析和数据透视表得出高钾玻璃和铅钡玻璃二氧化硅含量较多,风化前氧化铝、氧化钙、氧化铜含量均较高,钾玻璃风化后化学成分关联性较弱,铅钡玻璃风化后化学成分关联性较强。

圆-椭圆垂直复合微孔织构对密炼机端面密封装置摩擦性能的影响

建立密炼机端面密封装置圆-椭圆垂直复合微孔织构(简称复合织构)的流体动压润滑模型,研究织构参数和工况参数对复合织构摩擦性能的影响。结果表明:当复合织构深度为5μm时,复合织构端面密封装置具有最好的减摩性能;当复合织构面积率为43.96%时,润滑油膜平均无量纲压力(P_(a))最大和摩擦因数(μ)最小;复合织构的μ随着动密封环转速(n)和润滑油粘度(η)的增大而增大;密封间隙(h_(0))为3和6μm时,复合织构的P_(a)和μ都随着n和η的增大而增大;在不同的n和η下,复合织构的P_(a)和μ随着h_(0)的增大而减小。

广州主城区轨交站域活力时空分异与分类优化探讨

基于GIS平台结合百度热力图工作日和休息日全时段数据,深度解析广州主城区164个地铁站域活力时空分布,并基于平均活力值和活力离散系数划分6种站点类型,分类解析及探讨优化提升策略。研究表明:(1)时间维度:工作日站域活力集聚比休息日早,整体持续时间长;空间维度:工作日和休息日热力空间分布整体无显著差异,呈“从中心向外围逐步衰减”圈层结构。(2)以“平均活力值”和“活力离散系数”双重指标将164个站点分为6种类型,其中“高活力-低离散型”站点占51.8%。(3)不同类型站点活力变化差异显著,低活力站点开发强度低、高离散站点用地不均衡现象严重,建议根据6类站点不同活力特征进行精细化空间优化提升。

气浮垫的误差均化能力研究

为探究小孔节流气浮轴承的误差均化能力的主要影响因素,建立单个气浮垫的误差运动模型,并利用所定义的均化系数研究气浮垫误差运动、导轨条形状误差和气浮垫结构参数三者之间的定量关系。研究表明:对于长波长的导轨条形状误差(波数为0~1),当波数逐渐增加时,均化系数从1逐渐降低到接近0;对于短波长的导轨条形状误差(波数为1~10),当波数靠近或者等于正整数时,均化系数取接近于0的最小值;当波数靠近或者等于正整数加0.5时,均化系数取小于0.25的局部最大值;结构参数中,封气边宽度对误差均化能力有很大影响,气垫间隙和小孔节流器孔径对误差均化能力基本无影响;当移动速度小于10 000 mm/s时,移动速度对误差均化能力的影响微弱。