The molecular weight distribution (MWD) of dissolved organic matter (DOM) in lake waters from Lake Hongfeng was examined using high performance size exclusion chromatography (HPSEC) with UV-vis absorbance and fluoresc...The molecular weight distribution (MWD) of dissolved organic matter (DOM) in lake waters from Lake Hongfeng was examined using high performance size exclusion chromatography (HPSEC) with UV-vis absorbance and fluorescence detection. The elution curves obtained by absorbance and fluorescence techniques expressed similar patterns, with the exception of diminishing of large fraction and the peaks behind several seconds in fluorescence chromatograms. According to its molecular weight (MW), DOM in water samples is divided into several fractions: large ({>3.5} kDa); medium-large ({3.5}-{2.0} kDa); medium ({2.0}-{1.0} kDa) and small ({<1.0} kDa). The average molecular weight was calculated using the elution curve detected by UV-vis absorbance and fluorescence detection techniques. The results showed that the weight-average molecular weight (Mw) and number-average molecular weight (Mn) calculated by UV-vis absorbance techniques range from 1750 to 2050 Dalton and from 1450 to 1850 Dalton, respectively. And the Mw and Mn obtained by fluorescence detection are lower by 50 to 400 Dalton. As a reference, the molecular weight of Fluka humic acid (FHA) is larger than that of water samples by about 200 Dalton. The average molecular weight of DOM for water samples collected in March and July was compared. The results revealed that the molecular weight is lower for water samples obtained in July than that obtained in March, indicating the ambient environment has an influence on the molecular weight, including photo-degradation and biological activity.展开更多
A L463^5 Box-Behnken design was used for developing a model to predict and optimize the molecular weight （Mw ） of polypropylene （PP） ; a second-order polynomial regression equation was derived to predict responses...A L463^5 Box-Behnken design was used for developing a model to predict and optimize the molecular weight （Mw ） of polypropylene （PP） ; a second-order polynomial regression equation was derived to predict responses. The significance of variables and their interactions were tested by means of the ANOVA with 95% confidence limits; the standardized effects were investigated by Pareto chart, the optimum values of the selected variables were obtained by analyzing the response surface contour plots. The optimized Mw value of 1. 217 × 10^5 g/mol was very close to the industrial value （ （ 1.22 ±0. 004） ×10^6 g/tool） at the optimum values.展开更多
Six grades of biopolymers formulated to have oil content of 40% (M1), 50% (M2), and 60% (M3) melon seed oil (MESO) and 40% (C1), 50% (C2), and 60% (C3) cottonseed oil (COSO) respectively, were prepared with phthalic a...Six grades of biopolymers formulated to have oil content of 40% (M1), 50% (M2), and 60% (M3) melon seed oil (MESO) and 40% (C1), 50% (C2), and 60% (C3) cottonseed oil (COSO) respectively, were prepared with phthalic anhydride, and glycerol using alcoholysis-polycondensation process. The extend of polycondensation was monitored by determining the acid value of aliquots of the reaction mixture at various intervals of time. Molecular weight averages and polydispersity index (PDI) of the finished alkyds were determined by Rast method and end-group analysis. Molecular weight averages and PDI vary with differences in oil length of the alkyds, with samples M2 and C2 respectively exhibiting the highest PDI. Molecular weight average obtained from end-group analysis and those determined by Rast method in brackets are 1338.92 (597.00), 982.33 (696.25), 1316.09 (754.03), and 1160.57 (448.13), 765.96 (583.57), 1049.92 (696.25) for samples M1, M2, M3 and C1, C2, C3 respectively. Number molecular weight averages calculated from end-group analysis are larger than those obtained by Rast method for both MESO and COSO alkyds and seem to grossly overestimate their molecular weights. The mode of variation of these properties indicates that the synthesis of MESO and COSO alkyds are complex. Correlation of PDI with the quality of the finished alkyds shows that the higher the PDI value the better the quality of the alkyd. Performance properties such as rate of drying, film hardness and resistance to chemicals were optimum at 50% oil length for both triglyceride oil alkyds.展开更多
The bending strength of carbon?fiber/thermoplastic epoxy composites?(CF/TP-EP Compo.)?had?bi-linear increasewith increase of weight-average molecular weight (Mw) of matrix. The transition in the bending strength appea...The bending strength of carbon?fiber/thermoplastic epoxy composites?(CF/TP-EP Compo.)?had?bi-linear increasewith increase of weight-average molecular weight (Mw) of matrix. The transition in the bending strength appeared at around 55k of Mw (“k”?means 103). SEM observation of fractured surface of CF/TP-EP Compo. showed that the fracture mode changed from interfacial failure to fiber breakage dominated failure. The smooth surface of carbon fibers appeared at lower Mw than 55k while some resin remained on the fibers indicating good adhesion between carbon fiber and matrix at higher Mw than 55k. The interfacial shear strength between carbon fiber and matrix bi-linearly increased with an increase of Mw similarly to the bending strength of the composite, measured by the micro droplet test. The dynamic loss tanδ?of the matrix measured at 2?Hz also showed a bi-linear relationship with respect to Mw having a knee point at Mw = 55k. The connection probability of two cracks introduced on?each side of specimens also confirmed that the interfacial strength between carbon fiber and matrix is the key for the mechanical performance of CF/TP-EP Compo. in bending.展开更多
文摘The molecular weight distribution (MWD) of dissolved organic matter (DOM) in lake waters from Lake Hongfeng was examined using high performance size exclusion chromatography (HPSEC) with UV-vis absorbance and fluorescence detection. The elution curves obtained by absorbance and fluorescence techniques expressed similar patterns, with the exception of diminishing of large fraction and the peaks behind several seconds in fluorescence chromatograms. According to its molecular weight (MW), DOM in water samples is divided into several fractions: large ({>3.5} kDa); medium-large ({3.5}-{2.0} kDa); medium ({2.0}-{1.0} kDa) and small ({<1.0} kDa). The average molecular weight was calculated using the elution curve detected by UV-vis absorbance and fluorescence detection techniques. The results showed that the weight-average molecular weight (Mw) and number-average molecular weight (Mn) calculated by UV-vis absorbance techniques range from 1750 to 2050 Dalton and from 1450 to 1850 Dalton, respectively. And the Mw and Mn obtained by fluorescence detection are lower by 50 to 400 Dalton. As a reference, the molecular weight of Fluka humic acid (FHA) is larger than that of water samples by about 200 Dalton. The average molecular weight of DOM for water samples collected in March and July was compared. The results revealed that the molecular weight is lower for water samples obtained in July than that obtained in March, indicating the ambient environment has an influence on the molecular weight, including photo-degradation and biological activity.
基金Supported by the R&D Program of Catalyst Company,SINOPEC(G8101-11-ZS-0016*)
文摘A L463^5 Box-Behnken design was used for developing a model to predict and optimize the molecular weight （Mw ） of polypropylene （PP） ; a second-order polynomial regression equation was derived to predict responses. The significance of variables and their interactions were tested by means of the ANOVA with 95% confidence limits; the standardized effects were investigated by Pareto chart, the optimum values of the selected variables were obtained by analyzing the response surface contour plots. The optimized Mw value of 1. 217 × 10^5 g/mol was very close to the industrial value （ （ 1.22 ±0. 004） ×10^6 g/tool） at the optimum values.
文摘Six grades of biopolymers formulated to have oil content of 40% (M1), 50% (M2), and 60% (M3) melon seed oil (MESO) and 40% (C1), 50% (C2), and 60% (C3) cottonseed oil (COSO) respectively, were prepared with phthalic anhydride, and glycerol using alcoholysis-polycondensation process. The extend of polycondensation was monitored by determining the acid value of aliquots of the reaction mixture at various intervals of time. Molecular weight averages and polydispersity index (PDI) of the finished alkyds were determined by Rast method and end-group analysis. Molecular weight averages and PDI vary with differences in oil length of the alkyds, with samples M2 and C2 respectively exhibiting the highest PDI. Molecular weight average obtained from end-group analysis and those determined by Rast method in brackets are 1338.92 (597.00), 982.33 (696.25), 1316.09 (754.03), and 1160.57 (448.13), 765.96 (583.57), 1049.92 (696.25) for samples M1, M2, M3 and C1, C2, C3 respectively. Number molecular weight averages calculated from end-group analysis are larger than those obtained by Rast method for both MESO and COSO alkyds and seem to grossly overestimate their molecular weights. The mode of variation of these properties indicates that the synthesis of MESO and COSO alkyds are complex. Correlation of PDI with the quality of the finished alkyds shows that the higher the PDI value the better the quality of the alkyd. Performance properties such as rate of drying, film hardness and resistance to chemicals were optimum at 50% oil length for both triglyceride oil alkyds.
文摘The bending strength of carbon?fiber/thermoplastic epoxy composites?(CF/TP-EP Compo.)?had?bi-linear increasewith increase of weight-average molecular weight (Mw) of matrix. The transition in the bending strength appeared at around 55k of Mw (“k”?means 103). SEM observation of fractured surface of CF/TP-EP Compo. showed that the fracture mode changed from interfacial failure to fiber breakage dominated failure. The smooth surface of carbon fibers appeared at lower Mw than 55k while some resin remained on the fibers indicating good adhesion between carbon fiber and matrix at higher Mw than 55k. The interfacial shear strength between carbon fiber and matrix bi-linearly increased with an increase of Mw similarly to the bending strength of the composite, measured by the micro droplet test. The dynamic loss tanδ?of the matrix measured at 2?Hz also showed a bi-linear relationship with respect to Mw having a knee point at Mw = 55k. The connection probability of two cracks introduced on?each side of specimens also confirmed that the interfacial strength between carbon fiber and matrix is the key for the mechanical performance of CF/TP-EP Compo. in bending.
基金国家自然科学基金重点项目“高效耐盐两亲聚合物超分子包合驱油体系增效方法及作用机理”(项目编号52130401)国家自然科学基金青年项目“低渗裂缝油藏再粘接超分子凝胶颗粒研制及其封堵调控机理研究”(项目编号52204064)、“末端主客识别型速溶聚合物设计合成及其超分子体系黏度剪切调控机制”(项目编号52104055)国家自然科学基金外国青年学者项目“Construction method and mechanism of low concentration salt-tolerant amphiphilic”(项目编号52250410349)。
