The ratio of crack initiation stress to the uniaxial compressive strength(SCI,B/SUC,B) and the ratio of axial strain at the crack initiation stress to the axial strain at the uniaxial compressive strength(B,UCB,CI,A,A...The ratio of crack initiation stress to the uniaxial compressive strength(SCI,B/SUC,B) and the ratio of axial strain at the crack initiation stress to the axial strain at the uniaxial compressive strength(B,UCB,CI,A,A/SSSS) were studied by performing numerical stress analysis on blocks having multi flaws at close spacing's under uniaxial loading using PFC3 D. The following findings are obtained: SCI,B/SUC,B has an average value of about 0.5 with a variability of ± 0.1. This range agrees quite well with the values obtained by former research. For joint inclination angle, β=90°,B,UCB,CI,A,A/SSSS is found to be around 0.48 irrespective of the value of joint continuity factor, k. No particular relation is found betweenB,UCB,CI,A,A/SSSS and β; however, the average B,UCB,CI,A,A/SSSS seems to slightly decrease with increasing k. The variability ofB,UCB,CI,A,A/SSSS is found to increase with k.Based on the cases studied in this work,B,UCB,CI,A,A/SSSS ranges between 0.3 and 0.5. This range is quite close to the range of 0.4to 0.6 obtained for SCI,B/SUC,B. The highest variability of ± 0.12 forB,UCB,CI,A,A/SSSS is obtained for k=0.8. For the remaining k values the variability ofB,UCB,CI,A,A/SSSS can be expressed within ± 0.05. This finding is very similar to the finding obtained for the variability of SCI,B/SUC,B.展开更多
An accurate and efficient numerical method for solving the crack-crack interaction problem is presented. The method is mainly by means of the dislocation model, stress superposition principle and Chebyshev polynomial ...An accurate and efficient numerical method for solving the crack-crack interaction problem is presented. The method is mainly by means of the dislocation model, stress superposition principle and Chebyshev polynomial expansion of the pseudo-traction. This method can be applied to compute the stress intensity factors of multiple kinked cracks and multiple rows of periodic cracks as well as the overall strains of rock masses containing multiple kinked cracks under complex loads. Many complex computational examples are given. The dependence of the crack-crack interaction on the crack configuration, the geometrical and physical parameters, and loads pattern, is investigated. By comparison with numerical results under confining pressure unloading, it is shown that the crack-crack interaction under axial-dimensional unloading is weaker than those under confining pressure unloading. Numerical results for single faults and crossed faults show that the single faults are more unstable than the crossed faults. It is found from numerical results for different crack lengths and different crack spacing that the interaction among kinked cracks decreases with an increase in length of the kinked cracks and the crack spacing under axial-dimensional unloading.展开更多
Based on the transfer matrix method and Forman equation,a new method is proposed to conduct the modal and fatigue life analysis of a beam with multiple transverse cracks.In the modal analysis,the damping loss factor i...Based on the transfer matrix method and Forman equation,a new method is proposed to conduct the modal and fatigue life analysis of a beam with multiple transverse cracks.In the modal analysis,the damping loss factor is introduced by the complex elastic modulus,bending springs without mass are used to replace the transverse cracks,and the characteristic transfer matrix of the whole cracked beam can be derived.In the fatigue life analysis,considering the interaction of the beam vibration and fatigue cracks growth,the fatigue life of the cracked beam is predicted by the timing analysis method.Numerical calculation shows that cracks have a significant influence on the modal and fatigue life of the beam.展开更多
As an estimate for the in-situ spalling strength around massive underground excavations to moderately jointed brittle rocks, crack initiation stress marks the initiation of rock micro fracturing. It is crucial to accu...As an estimate for the in-situ spalling strength around massive underground excavations to moderately jointed brittle rocks, crack initiation stress marks the initiation of rock micro fracturing. It is crucial to accurately identify crack initiation stress level by proper method. In this study, confined compression tests of sandstone samples are used to examine the validity/applicability of proposed axial strain stiffness method. The results show that by highlighting the minuscule changes in stress-strain curve, the axial strain stiffness curve provided further insight into rock failure process and revealed five stages:(a) irregular fluctuation,(b) nearly horizontal regular fluctuation,(c) irregular fluctuation gradually decreasing to zero,(d) extreme fluctuation, and(e) near zero, which mainly correspond to five stages of stress–strain curve. The ratio of crack-initiation stress to peak strength determined using this approach is 0.44–0.51, similar to the ranges previously reported by other researchers. In this method, the key is to accurately detect the end point of the stage(b), "nearly horizontal regular fluctuation" characterized by a sudden change in axial strain stiffness curve, and the sudden change signifies crack initiation in rock sample. Finally, the research indicates that the axial strain stiffness curve can provide a mean to identify the crack-initiation stress thresholds in brittle rocks.展开更多
The plane problem of a crack terminating at the interface of a bimaterial piezoelectric, and loaded on its faces, is treated. The emphasis is placed on how to transform this problem into a non-homogeneous Hilbert prob...The plane problem of a crack terminating at the interface of a bimaterial piezoelectric, and loaded on its faces, is treated. The emphasis is placed on how to transform this problem into a non-homogeneous Hilbert problem. To make the derivation tractable, the concept of the axial conjugate is introduced and related to the complex conjugate. The angle between the crack line and the interface may be arbitrary. Numerical results are given to illustrate the stress singularity at crack tip.展开更多
Polyurethane polymer grouting materials were studied with conventional triaxial tests via the particle flow code in two dimensions（PFC^（2D）） method, and the simulation results agreed with the experimental data. Th...Polyurethane polymer grouting materials were studied with conventional triaxial tests via the particle flow code in two dimensions（PFC^（2D）） method, and the simulation results agreed with the experimental data. The particle flow code method can simulate the mechanical properties of the polymer. The triaxial cyclic loading tests of the polymer material under different confining pressures were carried out via PFC^（2D） to analyze its mechanical performance. The PFC^（2D） simulation results show that the value of the elastic modulus of the polymer decreases slowly at first and fluctuated within a narrow range near the value of the peak strength; the cumulative plastic strain increases slowly at first and then increases rapidly; the peak strength and elastic modulus of polymer increase with the confining pressure; the PFC^（2D） method can be used to quantitatively evaluate the damage behavior of the polymer material and estimate the fatigue life of the materials under fatigue load based on the number and the location of micro-cracks. Thus, the PFC^（2D） method is an effective tool to study polymers.展开更多
Various proportional and nonproportional tension-torsion fatigue tests are conducted on aeronautical material-LY12CZ aluminum alloy. The stress and strain states under tension-torsion loading are analyzed by an elasti...Various proportional and nonproportional tension-torsion fatigue tests are conducted on aeronautical material-LY12CZ aluminum alloy. The stress and strain states under tension-torsion loading are analyzed by an elastic-plastic finite element method. The relation between the orientation of crack propagation and each stress and strain component is investigated. Analytical results are compared with experimental data. Results demonstrate that the fatigue cracks tend to be propagated perpendicular to the direction of the largest principle strains under proportional loading, and grow alone one of the maximum shear strain planes under 45° and 90° out-of-phase loadings.展开更多
By the theory of complex functions, a penny-shaped crack on axially symmetric propagating problems for composite materials, was studied. The general representations of the analytical solutions with arbitrary index of ...By the theory of complex functions, a penny-shaped crack on axially symmetric propagating problems for composite materials, was studied. The general representations of the analytical solutions with arbitrary index of self-similarity, were presented for fracture elastodynamics problems on axially symmetry by the ways of self-similarity under the ladder-shaped loads. The problems dealt with can be transformed into Riemann-Hilbert problems and their closed analytical solutions are obtained rather simple by this method. After those analytical solutions are utilized by using the method of rotational superposition theorem in conjunction with that of Smirnov-Sobolev, the solutions of arbitrary complicated problems can be obtained.展开更多
基金Project(11102224)supported by the National Natural Science Foundation of ChinaProject(201206370124)supported by the China Scholarship Council,China
文摘The ratio of crack initiation stress to the uniaxial compressive strength(SCI,B/SUC,B) and the ratio of axial strain at the crack initiation stress to the axial strain at the uniaxial compressive strength(B,UCB,CI,A,A/SSSS) were studied by performing numerical stress analysis on blocks having multi flaws at close spacing's under uniaxial loading using PFC3 D. The following findings are obtained: SCI,B/SUC,B has an average value of about 0.5 with a variability of ± 0.1. This range agrees quite well with the values obtained by former research. For joint inclination angle, β=90°,B,UCB,CI,A,A/SSSS is found to be around 0.48 irrespective of the value of joint continuity factor, k. No particular relation is found betweenB,UCB,CI,A,A/SSSS and β; however, the average B,UCB,CI,A,A/SSSS seems to slightly decrease with increasing k. The variability ofB,UCB,CI,A,A/SSSS is found to increase with k.Based on the cases studied in this work,B,UCB,CI,A,A/SSSS ranges between 0.3 and 0.5. This range is quite close to the range of 0.4to 0.6 obtained for SCI,B/SUC,B. The highest variability of ± 0.12 forB,UCB,CI,A,A/SSSS is obtained for k=0.8. For the remaining k values the variability ofB,UCB,CI,A,A/SSSS can be expressed within ± 0.05. This finding is very similar to the finding obtained for the variability of SCI,B/SUC,B.
基金the National Natural Science Foundation of China (Nos. 50679097 and 50778184).
文摘An accurate and efficient numerical method for solving the crack-crack interaction problem is presented. The method is mainly by means of the dislocation model, stress superposition principle and Chebyshev polynomial expansion of the pseudo-traction. This method can be applied to compute the stress intensity factors of multiple kinked cracks and multiple rows of periodic cracks as well as the overall strains of rock masses containing multiple kinked cracks under complex loads. Many complex computational examples are given. The dependence of the crack-crack interaction on the crack configuration, the geometrical and physical parameters, and loads pattern, is investigated. By comparison with numerical results under confining pressure unloading, it is shown that the crack-crack interaction under axial-dimensional unloading is weaker than those under confining pressure unloading. Numerical results for single faults and crossed faults show that the single faults are more unstable than the crossed faults. It is found from numerical results for different crack lengths and different crack spacing that the interaction among kinked cracks decreases with an increase in length of the kinked cracks and the crack spacing under axial-dimensional unloading.
基金supported by aproject funded by the Priority Academic Program Development of Jiangsu Higher Education Institutions(PAPD)
文摘Based on the transfer matrix method and Forman equation,a new method is proposed to conduct the modal and fatigue life analysis of a beam with multiple transverse cracks.In the modal analysis,the damping loss factor is introduced by the complex elastic modulus,bending springs without mass are used to replace the transverse cracks,and the characteristic transfer matrix of the whole cracked beam can be derived.In the fatigue life analysis,considering the interaction of the beam vibration and fatigue cracks growth,the fatigue life of the cracked beam is predicted by the timing analysis method.Numerical calculation shows that cracks have a significant influence on the modal and fatigue life of the beam.
基金supported by the National Natural Science Foundation of China(Grants No.41772329,41572283 and 41230635)the funding of State Key Laboratory of Geohazard Prevention and Geoenvironment Protection(Nos.SKLGP2017Z001 and SKLGP2013Z004)supported by the Funding of Science and Technology Office of Sichuan Province(Grants No.2015JQ0020 and 2017TD0018)
文摘As an estimate for the in-situ spalling strength around massive underground excavations to moderately jointed brittle rocks, crack initiation stress marks the initiation of rock micro fracturing. It is crucial to accurately identify crack initiation stress level by proper method. In this study, confined compression tests of sandstone samples are used to examine the validity/applicability of proposed axial strain stiffness method. The results show that by highlighting the minuscule changes in stress-strain curve, the axial strain stiffness curve provided further insight into rock failure process and revealed five stages:(a) irregular fluctuation,(b) nearly horizontal regular fluctuation,(c) irregular fluctuation gradually decreasing to zero,(d) extreme fluctuation, and(e) near zero, which mainly correspond to five stages of stress–strain curve. The ratio of crack-initiation stress to peak strength determined using this approach is 0.44–0.51, similar to the ranges previously reported by other researchers. In this method, the key is to accurately detect the end point of the stage(b), "nearly horizontal regular fluctuation" characterized by a sudden change in axial strain stiffness curve, and the sudden change signifies crack initiation in rock sample. Finally, the research indicates that the axial strain stiffness curve can provide a mean to identify the crack-initiation stress thresholds in brittle rocks.
基金The Project Supported by National Natural Science Foundationthe National Education Committee Foundation for the Scholars Returning from Abroad
文摘The plane problem of a crack terminating at the interface of a bimaterial piezoelectric, and loaded on its faces, is treated. The emphasis is placed on how to transform this problem into a non-homogeneous Hilbert problem. To make the derivation tractable, the concept of the axial conjugate is introduced and related to the complex conjugate. The angle between the crack line and the interface may be arbitrary. Numerical results are given to illustrate the stress singularity at crack tip.
基金the National Key R&D Program of China(No.2017YFC0405002)
文摘Polyurethane polymer grouting materials were studied with conventional triaxial tests via the particle flow code in two dimensions（PFC^（2D）） method, and the simulation results agreed with the experimental data. The particle flow code method can simulate the mechanical properties of the polymer. The triaxial cyclic loading tests of the polymer material under different confining pressures were carried out via PFC^（2D） to analyze its mechanical performance. The PFC^（2D） simulation results show that the value of the elastic modulus of the polymer decreases slowly at first and fluctuated within a narrow range near the value of the peak strength; the cumulative plastic strain increases slowly at first and then increases rapidly; the peak strength and elastic modulus of polymer increase with the confining pressure; the PFC^（2D） method can be used to quantitatively evaluate the damage behavior of the polymer material and estimate the fatigue life of the materials under fatigue load based on the number and the location of micro-cracks. Thus, the PFC^（2D） method is an effective tool to study polymers.
文摘Various proportional and nonproportional tension-torsion fatigue tests are conducted on aeronautical material-LY12CZ aluminum alloy. The stress and strain states under tension-torsion loading are analyzed by an elastic-plastic finite element method. The relation between the orientation of crack propagation and each stress and strain component is investigated. Analytical results are compared with experimental data. Results demonstrate that the fatigue cracks tend to be propagated perpendicular to the direction of the largest principle strains under proportional loading, and grow alone one of the maximum shear strain planes under 45° and 90° out-of-phase loadings.
文摘By the theory of complex functions, a penny-shaped crack on axially symmetric propagating problems for composite materials, was studied. The general representations of the analytical solutions with arbitrary index of self-similarity, were presented for fracture elastodynamics problems on axially symmetry by the ways of self-similarity under the ladder-shaped loads. The problems dealt with can be transformed into Riemann-Hilbert problems and their closed analytical solutions are obtained rather simple by this method. After those analytical solutions are utilized by using the method of rotational superposition theorem in conjunction with that of Smirnov-Sobolev, the solutions of arbitrary complicated problems can be obtained.
