The structure of multiphase flow helico-axial pump＇s rotor and how to model the rotor, especially the blades of the rotor, based on the Solidworks software. More important, the principle of the blade design is mainly...The structure of multiphase flow helico-axial pump＇s rotor and how to model the rotor, especially the blades of the rotor, based on the Solidworks software. More important, the principle of the blade design is mainly introduced. Under the guide of the principle, the 3D coordinates of the blade data points can be got by matlab programming. In the paper, the design step and the modeling step are particularly described through a concrete example.展开更多
Based on the characteristics of axial fans of outdoor units of centralized air-conditioners, using the finite-volume method, applying three-dimensional steady Reynolds-averaged Navier-Stokes equations coupled with Spa...Based on the characteristics of axial fans of outdoor units of centralized air-conditioners, using the finite-volume method, applying three-dimensional steady Reynolds-averaged Navier-Stokes equations coupled with Spalart-Allmaras turbulence model equation, and adopting SIMPLE algorithm, numerical analysis is made and applied to analyze the internal flow field of axial rotors with skewed-swept blade at its leading edge. This numerical simulation mainly investigates the formation and development of the tip vortex. Based on the tip vortex characteristics that have been captured, the internal flow numerical results are compared with those obtained by the PIV experiments. This comparison indicates a good agreement between numerical results and PIV results, thus proving the validity of the numerical simulation. In addition, based on the internal flow analyses of the axial rotor with skewed-swept blade at its leading edge, different flow phenomena features are presented. These flow features can be used for further improvements of the present rotor performance characteristics.展开更多
用50%堵塞比的插板畸变屏模拟低速轴流压气机进口流场畸变,用P IV(粒子图像速度场仪,ParticleIm age V e loc im etry)技术测量均匀和畸变进气条件下压气机转子叶片通道内的流场结构。实验表明,进气畸变条件下压气机流场在转子叶片通道...用50%堵塞比的插板畸变屏模拟低速轴流压气机进口流场畸变,用P IV(粒子图像速度场仪,ParticleIm age V e loc im etry)技术测量均匀和畸变进气条件下压气机转子叶片通道内的流场结构。实验表明,进气畸变条件下压气机流场在转子叶片通道内不同的周向位置会产生四种不同的流动结构状态,同时,进气畸变大大增加了漩涡扰动、流动亏损和转子叶排气流分离的强度,这样必然会对压气机的性能产生很大的影响。实验也验证了经典平行压气机理论的缺陷。展开更多
基金Supported by National "863" Project of China (2007AA09Z318)
文摘The structure of multiphase flow helico-axial pump＇s rotor and how to model the rotor, especially the blades of the rotor, based on the Solidworks software. More important, the principle of the blade design is mainly introduced. Under the guide of the principle, the 3D coordinates of the blade data points can be got by matlab programming. In the paper, the design step and the modeling step are particularly described through a concrete example.
文摘Based on the characteristics of axial fans of outdoor units of centralized air-conditioners, using the finite-volume method, applying three-dimensional steady Reynolds-averaged Navier-Stokes equations coupled with Spalart-Allmaras turbulence model equation, and adopting SIMPLE algorithm, numerical analysis is made and applied to analyze the internal flow field of axial rotors with skewed-swept blade at its leading edge. This numerical simulation mainly investigates the formation and development of the tip vortex. Based on the tip vortex characteristics that have been captured, the internal flow numerical results are compared with those obtained by the PIV experiments. This comparison indicates a good agreement between numerical results and PIV results, thus proving the validity of the numerical simulation. In addition, based on the internal flow analyses of the axial rotor with skewed-swept blade at its leading edge, different flow phenomena features are presented. These flow features can be used for further improvements of the present rotor performance characteristics.
文摘用50%堵塞比的插板畸变屏模拟低速轴流压气机进口流场畸变,用P IV(粒子图像速度场仪,ParticleIm age V e loc im etry)技术测量均匀和畸变进气条件下压气机转子叶片通道内的流场结构。实验表明,进气畸变条件下压气机流场在转子叶片通道内不同的周向位置会产生四种不同的流动结构状态,同时,进气畸变大大增加了漩涡扰动、流动亏损和转子叶排气流分离的强度,这样必然会对压气机的性能产生很大的影响。实验也验证了经典平行压气机理论的缺陷。
